Janam Technologies XT100WB Mobile Computer User Manual
Janam Technologies LLC Mobile Computer
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3664687 |
| Application ID | 8MX7aNR/A4CK1yVzc2X86g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 150.01kB (1875113 bits) |
| Date Submitted | 2017-12-06 00:00:00 |
| Date Available | 2018-06-04 00:00:00 |
| Creation Date | 2017-11-16 19:58:20 |
| Producing Software | Microsoft® Word 2016 |
| Document Lastmod | 2017-12-04 13:04:07 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2016 |
| Document Author: | Joe |
XT100 Android 6.0.1 User Manual Enterprise Mobility XT100 User Manual For Android 6.0.1 PHONE & WLAN FCC ID: UTWXT100WA / IC: 6914A-XT100WA WLAN FCC ID: UTWXT100WB / IC: 6914A-XT100WB WCDMA/LTE feature is optional. Some product options only include WLAN feature. © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual User Manual Please note your phone is battery-embedded design with removable battery and battery cover. Unauthorized personnel are strictly prohibited from disassembling the phone. Make sure to use only the power adapter (5V 2A Output AC/DC) that came with XT100. In case your phone does not work as expected, you are strongly recommended to restart it by pressing and holding the power button for at least 12 seconds until the startup screen appears. If your phone has encountered a serious error and cannot be recovered, you should reset your phone to factory settings by using the menu, either “Backup & Reset”, or “Factory Reset”. For more details, please refer to “Factory data reset” section on page 42 Note: Please be cautious while performing the factory data reset. Because this will erase personalized settings and data saved in your phone, such as SMS, Contacts, Music, etc. Body-worn Operation PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. Rev 01 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Table of Contents User Manual .......................................................................................................................................................................... 1 Table of Contents ................................................................................................................................................................. 3 Getting Started...................................................................................................................................................................... 4 Major Parts ........................................................................................................................................................................ 4 Accessary .......................................................................................................................................................................... 6 Setup XT100 ..................................................................................................................................................................... 7 Charge XT100................................................................................................................................................................. 10 Turn On/Off XT100......................................................................................................................................................... 11 Hot swap the battery ...................................................................................................................................................... 12 Learning the basics ............................................................................................................................................................ 13 Use a keypad .................................................................................................................................................................. 13 Use a touch screen ........................................................................................................................................................ 15 Home Screen, Apps and Widget.................................................................................................................................. 17 Status & Notifications Icons .......................................................................................................................................... 21 Make a call ...................................................................................................................................................................... 23 Add to a contact.............................................................................................................................................................. 25 Send a message............................................................................................................................................................. 26 Connect to your Wi-Fi network ..................................................................................................................................... 28 Scanner Settings ................................................................................................................................................................ 30 Use a Scanner ................................................................................................................................................................ 30 Scan a Barcode .............................................................................................................................................................. 37 OS Update ........................................................................................................................................................................... 39 OS Image update from a Storage ................................................................................................................................ 39 OS Image update from the FOTA ................................................................................................................................ 41 Factory data reset .............................................................................................................................................................. 43 Factory data reset from Settings .................................................................................................................................. 43 Force Factory data reset ............................................................................................................................................... 45 EmKit .................................................................................................................................................................................... 48 EmKit Secure .................................................................................................................................................................. 49 EmKit Remote ................................................................................................................................................................. 50 EmKit Tools ..................................................................................................................................................................... 52 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Major Parts Major Parts Getting Started 1. Barcode Scanner 2. 3.5mm Audio Jack 3. Speaker 4. Illuminance / Proximity Sensor 5. Front Camera / LED Indicator 6. Touch Screen 7. Front Panel 8. Pogo pin connector 9. micro USB © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Major Parts Getting Started 1. Power Key 2. Scanner Trigger 3. Camera 4. Flash Light 5. Speaker 6. Battery Cover Wing 7. 3.5mm Audio Jack 8. Power Key 9. Scan Trigger Key © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Acc essar y Accessary Getting Started AC/DC adapter Plug (US/ EU/ UK/AU) LCD protection film Li-ion battery Jelly Case © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Setup XT100 Setup XT100 Getting Started Remove the Battery Cover 1. Lift up the Battery Cover with “Battery Cover Wing” 2. Remove the Battery Cover Insert and Remove the SIM card 1. Insert the SIM card into the slot. (Gold plate should face down) 2. To remove the card, gently slide it out of the slot. Getting ` Star ted © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Setup XT100 Getting Started Note: Your device only supports SIM cards. Do not attempt to insert other SIM types such as “Micro” and “Nano” SIM card, this may cause damage to your device. If you have to use different SIM card types, please use “SIM adaptor”. Install and Remove the microSD card 1. Insert the microSD card into the slot (Gold plate should face down). 2. To remove the microSD card, gently slide it out of the slot. Note: To avoid data loss and SD card damage, please ensure the SD card is unmounted from Android system “Settings – Storage - Unmount SD card” Getting Started © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Setup XT100 Getting Started Insert the Battery Insert “Battery” from bottom area first and then put in top area. Make sure battery contact “Battery Connector” and Battery Latch (Orange color) is locked Close the Battery Cover Insert “Battery Cover” from the bottom area first and then put in top area. Press battery cover with both hand firmly © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Charge XT 100 Charge XT100 Getting Started 1. Connect the AC/DC adaptor to your device and wall socket respectively 2. LED indicator will display charging status. Steady Red Battery is charging or Battery level is low Blinking Red Battery level is critical low Steady Green Battery is fully charged Blinking Red and Green Battery is removed or fail to recognize XT100 Battery Specification Standard Battery 3.8V, 3,000mAh Backup Battery 3.7V, 60mAh Charging time About 5hours Note: Always use an original charger and cable from the Janam Technologies LLC.. Other chargers and cables may damage XT100. In addition, make sure connector, charger, cables are not wet. 10 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Turn On/Off XT 100 Turn On/Off XT100 Getting Started Turn On 1. Press and hold down the “Power Key” for a few seconds. 2. When XT100 enter to the boot mode, it will display “SMART BEYOND RUGGED” logo with short vibration 3. Release the “Power Key” and wait until XT100 finish booting Note: If you cannot turn on your XT100, try below steps To turn on XT100, battery needs to be charged certain level. Please charge first Press and hold the “Power key” for 12 seconds to force reboot Press and release the “Reset Hole” and then turn on XT100 again Turn Off 1. Press and hold the “Power Key” until you see the power menu 2. Among the menu, tap “Power Off” 11 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Getting Started Hot s wap the batter y Hot swap the battery Getting Started When battery level is low, you can replace the battery without turning off and on XT100. Please unlock the Battery Latch (Orange color) first. Remove the Battery and replace to another one. Make sure the battery cover closed firmly. Press the Power Key to use XT100 again. 12 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Use a keypad Use a keypad Learning the basics Power key Press Lock the screen / Light up the screen. Press and hold Display the power menu “Power Off / Reboot / Airplane mode” Press and hold for 12seconds Forced to reboot Press the “Power” key and “Volume Down” key together Screen capture Volume keys In general Adjusts the ringtone volume or “Mute” the ringtone of an incoming call. In call mode Adjusts the earpiece or headset volume. In Music / Video / Streaming Adjusts the media volume. In camera preview Take the photo by pressing Volume Up or Down key. Scanner Triggers When “Scan Wedge” mode is activated By pressing, XT100 scan the barcode. 13 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Using a keypad Learning the basics Front panel Recent Apps key Press to see recently used apps. Home key From any apps or screens, press to return to the Home screen. Back key Press to go back to the previous screen, or to close a dialog box, options menu, notification panel, etc. 14 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Use a touch scr een Use a touch screen Learning the basics Touch One-finger press Double touch One-finger press, lift, one-finger press, lift for “Zoom in” Long press One-finger press, wait, lift for “Select an item” Drag, Swipe, or Fling One-finger press, move, lift for “Scroll” or “Tilt” Long-press drag One-finger press, wait, move, lift for “Pick up and move” or “select multiple items” 15 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Use a touch screen Learning the basics Scroll Vertical or horizontal swipe in a single direction Pinch Open & Close Two-finger press, move outwards and inwords, lift for “Zoom in and out” Rotate When XT100 is turning sideways, screen orientation is changing 16 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Home Scr een, Apps and Widg et Home Screen, Apps and Widget Learning the basics Status Bar - Status / Notification - Drag down to open the “Quick Setting Panel” Search Bar - Touch 1 to search by text - Touch 2 to search by voice Touch an icon to run an app, open folder, etc Favorite tray apps - Touch to run an app - Touch and hold to reorganize App Drawer Touch to enter “Apps and Widget” 17 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Home Screen, Apps and Widget Learning the basics Remove the app icon from home screen Long press the app icon and then drag it to the “Remove” area and then release Create “App Folder” Long press the app icon to other app icon. This will create the “App Folder” To set the folder name, touch the “Unnamed Folder” and rename it 18 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Home Screen, Apps and Widget Learning the basics Notification panel When there are notifications from the Android (system) or the App, you can check details by drag down the “Status Bar”. Quick setting panel You can access “Quick setting panel” by drag down the “Notification panel”. You can enable / disable functions or change modes easily. 19 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Home Screen, Apps and Widget Learning the basics By touching the “App drawer” icon, the “Apps” and “Widgets” you can enter to All installed apps are listed in the “Apps” tab, alphabetically Tap app icon to run. Long press, specific app icon to place to the “Home Screen”. All available widgets are listed in the “Widgets” tab, alphabetically. Long press, specific widget to place to the “Home Screen”. 20 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Status & Notific ations Ic ons Status & Notifications Icons Learning the basics Status icons 3G connected 3G in use 4G connected 4G in use Signal strength No signal Roaming Airplane mode No SIM card installed WLAN is on Connected to a WLAN network Bluetooth is on Connected to a Bluetooth device Battery is full Battery is partially drained Battery is low Battery is very low Battery is charging GPS is on Alarm is set Speaker phone is on Headset connected Vibrate mode/ Mute Phone mic is mute 21 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Status & Notifications Icons Learning the basics Notification icons Missed call New SMS or MMS message New Email Connected to VPN network Upcoming event Screenshot captured Preparing SD card SD card removed, unexpectedly OTG device connected File uploaded File downloaded There are more notification Other input method available 22 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Make a call Make a call Learning the basics Touch icon in the Favorite tray apps Slide to access the “FAVORITE”, “RECENTS” and “CONTACTS”. To make a call from recent call list or missed call, select “RECENTS” tab To make a call from your contact list, select “CONTRACTS” Touch to use a dialer Suggested phone number(s) Phone number can be saved to “CONTACTS” Touch and hold the dial pad #1, to access voicemail. 23 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Make a call Learning the basics You can answering or rejecting a call by sliding the phone icon Slide the the call icon to the right direction in order to answer Slide the call icon to the left direction in order to reject the Slide the icon upwards to reject the call and send a preset message to the caller. Tip: To mute the ringtone volume of an incoming call, keep press the “Volume down” key or turn your XT100 over. 24 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Add to a contact Add to a contact Learning the basics Touch “App Drawer” icon and then icon CREATE A NEW CONTACT - You can manually create the new contact SIGN IN TO AN ACCOUNT - You can sync with your contacts in the Google account. IMPORT CONTACTS - You can import contact in the storage (.vcf file) or SIM card Touch to add a new contact 25 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Send a mes sag e Send a message Learning the basics Touch icon in the Favorite tray apps Touch to use a dialer Touch to type a name, phone number or email Suggest contact display here. Touch “Contacts” to compose a message 26 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Send a message Learning the basics Your message display here Touch to send the composed message You can attach photo, saved picture, voice or location Note: You may allow granting “Message App” access specific app or service. 27 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Connect to your Wi-Fi networ k Connect to your Wi-Fi network Learning the basics Touch “App Drawer” “WLAN” Touch to turn On / Off the W-Fi “Settings” and then You can see nearby Wi-Fi network. Each AP’s SSID information listed by signal strength Icon means: Open Wi-Fi network. You don’t need to enter the password Icon means: Secured Wi-Fi network. To connect this Wi-Fi, you need to enter the password 28 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Learni ng the basics Connect to your Wi-Fi network Learning the basics Touch SSID, which you want to connect. To connect to secured network, enter the password Your XT100 is obtaining the IP address from selected AP 29 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Use a Scanner Scanner Settings Default setting of Scanner is “Off” To use the Scanner, EmKit and then “ScanSetting” Touch Touch “App Drawer” then “ScanSettings” Touch to turn on the Scanner 30 © 2006 – 2017 Janam Technologies LLC.All rights reserved “Settings” and XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings Now you can see “Scanner” icon in the “Status Bar” Note: When “Scanner” turned on, you can scan the barcode with “ScanDemo” in the EmKit 31 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings Scanner setting details Scanner setting consist with “Basic”, “Options”, “Notification”, “Wedge”, “Symbologies”, and “About” In the “Basic”, you can set “Scanning” option and “Wedge” mode option In the “Scanning menu”, you can change Scanner’s trigger time out and set “Auto scan” & “Continues scan” In the Wedge menu you can change, decode scan data’s result type handling “User Message”, “Keyboard Event”, “Clipboard’ or ‘Intent Broadcast’. Also you can set “Terminator” – “Space”, “Tab”, “LF” or “Tab & LF” 32 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings In the “Options”, you can enable / disable the “Center Window”, set “Decode mode”, “Power save mode” and enable / disable “Aimer” & “Illumination” In the “Notification”, you can set notification option. You can change the volume level, notification sound, LED and vibration option 33 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings In the “Wedge”, you can enable / disable “Barcode ID” and “Aim ID”, set “Group separator”, “Prefix” & “Suffix” and “Character set” 34 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings In the “Symbologies”, you can enable / disable specific barcode. By touching each “Symbology” name, you can set detail option. 35 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scanner Setti ngs Use a Scanner Scanner Settings In the ‘About’, you can check your Scanner’s information and restore Scanner’s settings to default 36 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scan a Barc ode Scan a Barcode Scanner Settings Example of good Barcode reading Idle barcode scan Please aim the middle of barcode Even you aim the barcode slightly upper or down area or angle is tilted, you can read the barcode 37 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Scan a Barc ode Scan a Barcode Scanner Settings Example of bad Barcode reading If you aim the barcode wrong direction or tilt too much, you can’t read the barcode If you aim part of Barcode or aim two barcode together, you can’t read the barcode 38 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual OS U pdate OS Imag e update from a Storag e OS Image update from a Storage OS Update To update OS image, copy or place OS image file into the root folder of “Internal Storage” or “External Storage” Touch “App Drawer” “About phone” Touch “System Updates” 39 © 2006 – 2017 Janam Technologies LLC.All rights reserved “Settings” and then XT100 Android 6.0.1 User Manual OS U pdate OS Image update from a Storage OS Update Your XT100 will check storage and display available OS image Touch “Update” button By touching the “CONTINUE” button, your XT100 start to update the OS image. During this time, you cannot use your XT100. Please save the data before start, the OS update process. 40 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual OS U pdate OS Imag e update from the FOT A OS Image update from the FOTA Tap OS Update icon for the advanced option Touch “FOTA Client” 41 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual OS U pdate OS Image update from the FOTA OS Update XT100 will compare the OS image between FOTA server and current OS image. If there is newer OS image in the FOTA server, FOTA server will suggest downloading. Touch “OK” to start download the image in the FOTA server You can cancel OS image download process Note: Default OS image download setting of FOTA Client is “Download over Wi-Fi only” Please connect to the nearby Wi-Fi network for FOTA service 42 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Factor y data res et Factor y data res et from Setti ngs Factory data reset from Settings Factory data reset When your XT100 system is unstable and abnormal behavior occur but could not recover by rebooting, you may need to “Factory data reset” your XT100 Touch “App Drawer” “Backup & reset” Touch “Factory data reset” 43 © 2006 – 2017 Janam Technologies LLC.All rights reserved “Settings” and then XT100 Android 6.0.1 User Manual Factory data reset from Settings Factory data reset Please note, all apps and data in the internal storage will be deleted and restored to “Factory default” and this process cannot “Undo” Touch to start “Factory Reset” process Touch to confirm erase of “Apps and Data” 44 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Factor y data Res et Force Factor y data r eset Force Factory data reset Factory data reset Force Factory data reset your XT100 You can perform “force” factory data reset your XT100. When your XT100 turned off, press “Power” + “Volume up” + “Home” button all together. After short vibration from your XT100, you may release the buttons. XT100 enter to the “Android Recovery” mode. In this mode, “Volume up” is “Move Up” in the menu tree and “Volume down” is “Move Down” in the menu tree. “Power Button” is “Select” 45 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Factor y data Res et Force Factory data reset Factory data reset Select “Wipe data/factory reset” Select “Yes” to perform the “Factory data reset” After that, your XT100 start wiping the data 46 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual Factor y data Res et Force Factory data reset Factory data reset After data wiping, please select “Reboot system now” to finish the “Force Factory data reset” process 47 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Enterprise Mobility Kit EmKit Enterprise Mobility Kit – Truly, what Enterprise needs Janam Technologies announces new software solution – called “EmKit” is new software solution for enterprise mobility users. Our every Android device shall have EmKit pre-installed and every use can access them for free of charge*. EmKit offers truly-value-added advantages, for enterprise users, which are against consumercentric & non-customizable smartphones. Every solution in EmKit is 100% compatible with Janam Technologies Android GMS certified devices. * Necessary MDM license subjects upon individual subscribers EmKit consist with “EmKit Secure”, “EmKit Remote”, “Emkit Tools” and “EmKit Demos” EmKit Secure “Lock Your Device” EmKit Remote “Mobile Device Management” EmKit Tools “Smarty Tools Ease Enterprise” EmKit Demos “Friendly For Programmers” 48 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Sec ure EmKit Secure EmKit Power Launcher You can lock your XT100’s “Home Screen” and limit to access “Settings” from “Quick Setting” panel. This function as known as “Kiosk” mode Program Buttons You can assign Hardware buttons function to rich preassigned functions. Also you can applying the customized KCM file (Key Character Map Files) here 49 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Remote EmKit Remote EmKit Airwatch Agent preinstalled. Select option for enrollment process SOTI Mobi Control preinstalled Enter enrollment information for the next process 50 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Remote EmKit Remote EmKit Teamviewer Quick Support App and Plugin, preinstalled. You may need to purchase “Teamviewer” license during remote access and control 51 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Tools EmKit Tools EmKit Backup & Restore You can create the “Golden sample” and then “Restore” I to other XT100 easily ScanSetting You can set your XT100’s scanner option with intuitive menu 52 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual EmKit Tools EmKit Tools EmKit System information All of SW and HW information available here and can save it to the file. - Touch “Save to file” - devinfo.html file saved to root folder of the internal storage. Take Bug Report This function save logs and event to the internal storage. When you have a field issue, and need to contact service center, please find the reproduce step first. Reproduce the issue. After issue, reproduce, please run “Take bug report” File will be saved to “bugreports” folder. Copy the file to the PC and then zip it to reduce the file size Share bug report file to the service center with “reproduce” steps. 53 © 2006 – 2017 Janam Technologies LLC.All rights reserved XT100 Android 6.0.1 User Manual FCC Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device is restricted to indoor use only within the 5.15 ~ 5.35GHz Band. Cet appareil est restreint à l'utilisation à l'intérieur seulement dans la bande 5.15 ~ 5.35GHz. 54 © 2006 – 2017 Janam Technologies LLC.All rights reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : ko-KR XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Creator : Joe Create Date : 2017:11:16 19:58:20+09:00 Creator Tool : Microsoft® Word 2016 Modify Date : 2017:12:04 13:04:07+09:00 Metadata Date : 2017:12:04 13:04:07+09:00 Producer : Microsoft® Word 2016 Document ID : uuid:2f8ac710-d85f-40d2-9cf3-da42797a9a0e Instance ID : uuid:df74efd8-173b-4e91-99cf-af5a91a871aa Page Count : 54 Author : JoeEXIF Metadata provided by EXIF.tools