Janam Technologies XT2WB Mobile Computer User Manual

Janam Technologies LLC Mobile Computer HT K10 Manual Toshiba page1 130103

a href="https://usermanual.wiki/Janam-Technologies" itemprop="url"> Janam Technologies >

User Manual

FrontPackage contents Device layoutMenu keysDeviceStylus pen with TetherAC/DC Adaptor (AC plug)BatteryWrist StrapLCD protection filmTouch ScreenScan keyFront cameraInstalling battery1. Rotate lock to counter clockwise and pull up the battery cover by holding both sides at bottom. HANDHELD TERMINALQuick start guide3. Hold the ribbon and lift upward to remove batteryXT2WB Function keyRecents key• Tap to open the list of recent apps.Home key • Press to return to the Home screen while running apps• Press to return to the Home screen from other screens• Press and hold to launch internetBack key • Tab to return to the previous screen or to close current screen (dialog box, option menu, notification panel, etc)Function key • Press to set functions on keys• Press to create shortcut of programsDevice layoutUp/down & sides I/O ConnectorExit windowDevice layoutScan keyPower keyVolume Up/DownLED indicator2. Insert battery, top first, into the battery compartment.4. Insert battery cover,top first and press it in the order named on the picture. Then press down on battery at the center again.•Please read this manual before using the device and follow the instructions correctly.•Some content may differ from your device depending on the device’s software version.Back keyHome keyRecents keyHeadset jackBackMSRBattery cover lockBattery coverSpeakerCamera & FlashlightMenu keysDC socketRemoving battery
Installing/ Removing Micro SD card Standard accessoryInstalling Micro SD card1. Remove battery from device and insert Micro SD card.2. Insert battery again after installing Micro SD card.Removing Micro SD card1. Press Micro SD card gently and slide it out.2. Remove Micro SD card from device.3. Insert battery again.<Caution>•Micro SD card is not standard/optional accessory. Do purchase it from distributor.•Device supports storage extension upto 32GB with Micro SD card.•Turn off the device before removing battery.Charging the battery•Due to installing/ removing battery, save the working data first and then install or remove Micro SD card. Getting Started1. Insert plug on AC/DC Adaptor and connect to electric socket to charge.2. LED indicator on upper left of device shows red light while charging and it turns to green light when the device is fully charged. <Caution> •Use only items provided in your purchase for charging.•You can also charge the device with optional accessory, cradle.5V 2A AC/DC AdaptorWrist StrapStylus pen with TetherBattery (3000mAh)plugLCD protection filmOptional accessarySSC(Single Slot Cradle) 4SC(4 Slot Cradle)4SBC(4 Slot Battery Charger)Turning the device on and offOn- Press power key on upper right of device to turn on.After few seconds, device will turn on.Off- Press and hold power key for a while till you and tap power off on the screen options.Home screen itemsPoint the scanning beam at the center of barcode andkeep scanning angle vertical to it.Scanning range varies according to bar code size sokeep minimum distance for small barcode and furtherdistance for bigger one.ScanningStatus bar• Displays status/notification• Tap and drag down to show notification panelPUSHGood: Well aimedSo so: aimed a bit below but still readablePoor: aimed a bit one sided but still readable.Bad: aimed diagonal, cannot readBad: aimed too one sided to read, cannot readBad: aimed vertical, cannot readScanning: aiming patternI/O USB Sync cable Extended Battery(4000mA)Start with setting language input, google account, GPS, etc when the device is on for the first time.Device works without SIM card and device functions are available through WLAN network connection and google account registration.Set upBrowser barTab and google search by textTab and google search by voice12Home screen• Tab and slide right/left to go other screens• Tab icons to open applications/ foldersFavorites shortcut•Press and hold to set/move applicationsOpens apps windowScanningEnable/ disable Scan Wedge1. Tab status bar on the top and drag to open notification panel.2. Tab Scan Wedge to enable/ disable scanner.3 If Scan Wedge is set disabled, scanner is at same status.Enabled scanner icon1. Execute Demos application on home screen.2. Tab ScanDemo to open. 3. Press both scan keys at once or any of scan key on the device to scan barcode.4. Scanned barcode data will show on screen as on the picture left.Testing barcode scanner
Resetting the deviceRebootPress and hold power key for 3 seconds and select Reboot on options to reboot the device.Factory resetFollow the process by tapping next button to complete factory reset.<Caution>•Back up all data - personal, application settings, account information and etc. before performing factory reset as it causes all data delete.Setting the date and timeStandard featuresGo to below route to set date and time.Access to above route and alter the following settings according to user’s decision.• Set date• Set time• Select time zone• Use 24-hour format• Select date formatItemSpecificationsModelXT2WBOperatingSystemAndroid 5.X or higher(GMS/CTS certified)SoftwareToolsand DemosMicro-ProcessorQualcomm8016 1.2GHz Quad CoreMemory1GB RAM X 8GB Flash(Upgradable)MemoryextensionUseraccessible Micro SD memory card slot.Display5.0”Wideviewing angle IPS(1280 X720 pixels)Data captureoptions2D engine : SE4710KeypadTouchscreen & Front 4 hard keysAudioBuilt-in microphone and speakerI/OHighspeed USB 2.0 from cradle (or I/O cable)Weight279g / 293g(MSR model) with batteryWifi802.11 a/b/g/n(Up to 150Mbps)BluetoothBluetoothv4.x, class2NFC/RFID13.5593MHzSerial(RS232C)9600bps,19.2kpbs,38.4kbps,57.6kbps,115.2kbpsUSBUSBHS 2.0 OTG Support via I/O connectorBatteryLi-ion battery 3.8V / 3000 mAh / 11.4 WhAdaptorOutput: 5V / 2A, Input: 100-240V~50/60Hz 0.4ACharger5V input through DC port.BatteryCapacity: 3000mAh –Less than 4hrs.Operatingtemperature-20ºC ~ 60ºCRain/dustprotectionIP67Li-ion battery follows varied regulations in each region/ country. Accordingly, recycle or disuse li-ion battery properly. Do not leave or store it in fire or heat it or disassemble or short circuit it.Prevent plug and consent from dust and dirt to keep them clean. Improper storing or misuse may cause fire, electric shock, etc.WarningDo not allow any strong pressure or impact on thetouch screen. Do not touch any interior liquid fromLCD panel breakage that may cause skin irritation.Use only approved AC/DC power adaptor provided with device or from distributor.Disapproved products may cause unexpected problems as fire, electric shock, etc.Disapproved modification or repair is not guaranteed. Inquire to distributor for any troubleshooting.OfflineTel: 02-3397-7870Fax: 02-3397-7872Address: 100 Crossways Park Drive West, Suite 105, Woodbury, NY 11797 USAOnlineWebsite: http://www.janam.com/E-mail: inquiries@janam.comUser guides supports detailed information on safety & regulations of device and accessories.Due to the possibility of electric wave interference by device, no support on life safety.Technical support & A/SUser guidesCertificationEquipment name: Wireless data communication system device (Wireless Access System device with Wireless LAN)Model: XT2WBTrade name of certified: Janam Technology LLC.Manufacturer/ Country of origin: Janam Technology LLC. Production date: 2016.XX.XXFCC ID: UTWXT2WBIC ID: 6914A-XT2WBConnecting USB data Sync cableConnect to PC and transfer data in Micro SD card/ device storage with I/O USB data Sync cable.Connecting –connect USB cable to USB port of PC and I/O connector.–Tab media device connection on notification panel of status bar.–Select file transfer on pop up window.Disconnecting –Tab to show notification panel and select media device connection.–Select media device (MTP) and disable the connection.Connecting to PCHANDY TERMINALQuick start guideXT2WB•For more details of product information and user guide, please refer to our website (www.janam.com)Settings -> back up and reset -> Factory reset -> Reset phoneSettings -> Date and time -> Uncheck automatic date & time,Uncheck automatic time zoneWireless features (frequency)WLAN• 802.11b/g/n : 2412~2472MHz• 802.11a/n: 5180~5240, 5260~5320, 5500~5620, 5745~5805MHzBluetooth• 1~3Mbps: 2402~2480MHz• LE: 2402~2480MHzAllowed to use in all area.Please use the device at 1 cm or more distance away from your body.
Download:
Mirror Download [FCC.gov]
Document ID2964543
Application IDGDPfNvNA0e3OeauH4iYHYQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize95.27kB (1190827 bits)
Date Submitted2016-04-20 00:00:00
Date Available2016-10-17 00:00:00
Creation Date2016-03-23 10:21:36
Document Lastmod2016-04-11 11:03:04
Document TitleHT-K10 Manual-Toshiba_page1_130103
Document Author: cgt
FCC ID Filing: UTWXT2WB

Navigation menu