Japan Radio JHS-500 Marine VHF User Manual ManualPage11to18

Japan Radio Co Ltd. Marine VHF ManualPage11to18

ManualPage11to18

Download: Japan Radio JHS-500 Marine VHF User Manual ManualPage11to18
Mirror Download [FCC.gov]Japan Radio JHS-500 Marine VHF User Manual ManualPage11to18
Document ID142958
Application IDGo3WJKgldzppS8GZSyeqxw==
Document DescriptionManualPage11to18
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize179.3kB (2241251 bits)
Date Submitted2001-04-02 00:00:00
Date Available2001-04-10 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAdobe Photoshop for Windows
Document Lastmod2001-04-02 11:33:32
Document TitleManualPage11to18
Document CreatorAdobe Photoshop 4.0

* Distress Relay Call
When a Distress Relay Call is received, an emergency alarm is sounded, and the
channel turns to CH16 automatically. The emergency alarm is cancelled by pressing any key.
REL RCV Press ANY key
USA 22 H USA 16 % USA 16
* Individual Gall
When an Individual Call is received, an ACK signal must be transmitted
immediately. The ACK signal is either “able to comply” or “unable to comply’
Able to comely
When an Individual call is received. an alarm is sounded, and the channel turns to the designated
channel or CHIG ( if there is no channel designated) automatically,
IND RCV TX IND
USA 18 % 70n1 6 70
Receive INDcaII Tx ACK
Designated channel IND Rcv
USA 22 avl\
Call from the party reglstered in No.1
No designated channel IND RCV
USA 16 u1\
Call from the party registered in No.1
10
Unable to comely
Select Individual Call mode by pressing the CALL key. and select “Un” using the UP/DOWN key.
Press the CALL key for more than 2 sec, and the transceiver is in Standby Receiving mode. If an
IND Call is received in this mode, an “Unable to comply" ACK signal is transmitted.
Press IND Press IND Press MEMO
CALL USA 22u1 UP/DOWN USA22nUn CALL USA 22 Un
2 see Standby mode
IND TX IND IND MEMO
70 Un % 70 Un % USA 22 Un
Receive IND call TX ACK Standbymode
“MEMO" blinks on the LCD, showing that the ID number of the party you called has been
registered. Maximum 5 ID numbers can be registered.
Standby receiving mode can be cancelled by pressing any key.
* All Ships Call
In the All Ships Call mode, the Routine Call mode is available.
When a Routine Call is received, an alarm sounds and the designated channel is
selected. Press any key to stop the Emergency Alarm.
ALL RCV
USA 22 h% USA 155
Designated channel
11
* Geograghicel Area Call
When a geographical area call is received, an Emergency Alarm sounds, and the
channel turns to that designated by the Other vessel automatically Press any key to stop the
Emergency Alarm.
RCV
USA 22 fi 70 gE fiusxx 25g;
44 Registration of the Other Ship’s ID Number
VHF marine radiotelephones are identified by MMSI ( Marine Mobile Service Identity),
which is composed of 9~figure digit numbers. To register the other ship’s ID
numbers ( maximum 20), Follow Hie procedure shown below.
Example: Put [ ID: 3 5 6 - ~ — 2 to the Registration No. I
Figure: (D
Reg'stration No. ( o~19>
Press IND / Select file desired Nob by
USA 22 CALL 9 USA 22 u 1 UP/DOWN key. If the No.
has been occupied, “MEMO"
aDDears above the No.
ID Numbefiblinkmg)
Press / Press
MEM/SGAN d8 n 1 UP/DOWN % d3 ul
For 2 sec 'i\First digit of 9 figures
Fresh
Press MEM/SCAN d8n 2 UP/DOWN 9 d5 "2
7i 2” digit are figures
Press
Press MEM/SCAN dB at! UP/DOWN 6 d6 "3
12
Repeat the same procedure till 9th digit of the 9 figures. Then press MEWSGAN to return
to the first digit, dS Av 1. Press MEMISCAN for Zaec.
“MEMO" appears on the LCD showing the registration is completed. Press 16/9
to return to the normal receiving mode.
Press First digit 1
. MEM/SCAN MEMO Press |ND
d2 AV 9 d AV 1 foii 25ec d AV 1 16/9 USA 22 Av]
Press MEM/SCAN Registration completed Registration No. 1
d 8: If UP/DOWN key is pressed while 8 is blinking, the figure 8 is changed.
If MEM/SCAN is pressed. the digit of the 9 figures AV(I ~ 9) is changed.
Note: * lf the ID has been already registered, it is superscripted.
* Reconfirmation of me registered ID:
Select IND mode using CALL key. Then press MEM/SGAN key to select ID
registration mode. Select Av number( I ~ 9) in turn using
UP/DOWN key. and reconfirm the ID numbers. (M/S = HEM/SCAM)
Press |ND Pre 5 Press
CALL USA 22u1 M/S d3 m M/s d5 u 2
lr
d2 AV9
* Modification of the registered content:
Example: To correct the fifth figure of Hie ID from 4 to 8 ( Registered in No.3) :
Press CALL |ND UP/EN |ND M/S
USA 22AY 1 USA 22AY 3 ForZ sec d3 AV 1
Registration No.3 1‘l digt of 9 figures
Press Press Press Press IND
M/s d4AY5 UP/DN dBAYS M/S dSAVG /S USA 22AV3
for 2 sec
5. Registration of the Self ID Number
Turn the main power switch on while pressing the CALL key, and follow the
same procedure as in the registration of the other ship’s ID.
The trial of registration of the self ID is restricted to two times.
13
6, Specifications
General Characteristics
1. Radio Compliance
2. Number of Channels
3. input Voltage
4. Input Current
5. Modulation Type
6. Operating Temperature
Transmitter Characteristics
Frequency Range
Channel Spacing
RF Output Power
Frequency Stability
Frequency Deviation
Modulation AF Response
PQPPNT‘
Time—out—timer
. Hum 81 Noise Level
ms
: FCC Part 2, 15, 50, D00 V. DSC
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Adobe Photoshop 4.0
Create Date                     :  Tue Nov 14 20:09:22 2000.
Producer                        : Adobe Photoshop for Windows
Modify Date                     : 2001:04:02 11:33:32-08:00
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: CKEJHS-500

Navigation menu