Japan Radio NKE2632 Solid State S-Band Marine Radar User Manual

Japan Radio Co Ltd. Solid State S-Band Marine Radar Installation Manual Part 1

a href="https://usermanual.wiki/Japan-Radio" itemprop="url"> Japan Radio >

Installation Manual Part 3

3 Installation of Display Unit > 3.4 Installation of Standard Equipment 3-30 2) Install the Monitor Unit to the Display Unit Mount Kit with screws. Screws are attached to the Monitor Unit. Screw: M5x14SUS + Spring washer + Washer (included in CWA-245/CWA-246/CWB-1594/CWB-1595) Number of screw point: 26inch Monitor Unit(NWZ-208/NWZ-208-TP) - 10 points 19inch Monitor Unit(NWZ-207/NWZ-207-TP) - 6 points Do not install in a position to close the vents of the monitor. In case of the 26inch Monitor Unit 3) Remove the rear panel for wiring. Remove 4) Insert the screw covers into the top and bottom spaces on the monitor. Monitor unit(26inch) NWZ-208/NWZ-208-TP Monitor unit(19inch) NWZ-207/NWZ-207-TP Installation of Monitor Unit ends above.
Download:
Mirror Download [FCC.gov]
Document ID2791036
Application IDo6LERARSP56i/cSy+lEJSg==
Document DescriptionInstallation Manual Part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize380.35kB (4754346 bits)
Date Submitted2015-10-22 00:00:00
Date Available2015-10-22 00:00:00
Creation Date2015-10-15 14:51:34
Producing SoftwareiTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version)
Document Lastmod2015-10-15 14:51:54
Document TitleInstallation Manual Part 3
Document CreatorPScript5.dll Version 5.2.2
Document Author: admin
FCC ID Filing: CKENKE2632

Navigation menu