Japan Radio NKE2632 Solid State S-Band Marine Radar User Manual

Japan Radio Co Ltd. Solid State S-Band Marine Radar Installation Manual Part 1

a href="https://usermanual.wiki/Japan-Radio" itemprop="url"> Japan Radio >

Installation Manual Part 5

3 Installation of Display Unit > 3.5 Installation of Option Equipment 3-94 9) While maintaining the OFF state of the circuit breaker for the power supply of the display unit, turn ON the circuit breaker of the main power line and check that the LEDs of the UPS controller turn ON/OFF as follows. LED Color ON/OFF Status Alarm Red OFF Bat.-Mode Bat.-Charge Yellow Flashing or OFF Power In OK Green ON 10) Install the rear panel installed UPS to the frame. And wire the cable to pass through the cable tie base No.16. 11) Install the 2 frames for installing the JB. The installation of UPS ends above.
Download:
Mirror Download [FCC.gov]
Document ID2791038
Application IDo6LERARSP56i/cSy+lEJSg==
Document DescriptionInstallation Manual Part 5
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize186.45kB (2330676 bits)
Date Submitted2015-10-22 00:00:00
Date Available2015-10-22 00:00:00
Creation Date2015-10-15 15:00:08
Producing SoftwareiTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version)
Document Lastmod2015-10-15 15:00:48
Document TitleInstallation Manual Part 5
Document CreatorPScript5.dll Version 5.2.2
Document Author: admin
FCC ID Filing: CKENKE2632

Navigation menu