Jasco 0762TX Wireless Thermometer User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	342909
Application ID	zZEjnAPxAWoFEeb2aWP9Ow==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.35kB (104414 bits)
Date Submitted	2003-07-25 00:00:00
Date Available	2003-07-25 00:00:00
Creation Date	2003-07-23 15:31:49
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	穨(3)
Document Creator	穨七月 23, 2003 (3)

RF Wireless Then-nomeier Owner's Manual
Thank you for purchasmg the new generation RF Wireless Thermometer. Uestgned and
engineered with the state-chart technology and components, this instrument will provide
accurate and oonvcnient measurement of indoor and uutdovi tciiipeiatulus uv Lu 2 remote
sensors. Read this manual carefully to full explore the features and functions of the new
product
Name and Functions of Bunonn
Press Functions Hold 3 ggggngg
CHANNEL Select Channel 1 and 2 Delete current channel
MlNl MAX Read maximum! minimum record
CLEAR Clear memory at Max! Min display
C/F Select Cl F
Auto Scroll Remote channel scrolling on and ofl
BATTERY INSTALLATION
Hummer:
Lift off the battery cover at the back, install 2 pcs AA batteries according to the
polarity indicated, close the battery cover
Remote Senson
Lift off the bracket stand loose the 4 screws With a small screwdriven insert 2 pcs AA
batteries according to the polarity indicated. Replace the cover and tighten the 4 screws
SE'I'l'ING UP THE WIRELESS THERMOMETER:
I For the first installation, always Insert batteries to the home unit and then the remote
sensor Your new RF Thermometer is build with random security code technology, the
home unit will learn the random code of the first remote sensor and log in as channel tr
Channel 2 will be registered in the same way. (contact your local dealers for additional
remote sensors)
0 The registered channels will be erased when the batteries of the remote sensor or the
home unit are removedl
I When replacrng battens; for the remote sensor. remember to clear the corresponding
channel of the home unit in this way: Select the respective channel y pressing the
CHANNEL button. hold the CHANNEL button 3 seconds to clear the registration.
0 When replacing batteries for the home receiver. please remove batteries of all remote
sensors and re-install the batteries to the sensors according to the desired channel
sequence.
0 Press the Tx button on the back of remote sensor to verify the RF reception. hold the
button 3 see to reset.
or F sELecrlon
At normal mode. press ‘ -“ button to select 0 and F,
MIX! MAX MEMORY
Press the "MIN/ MAX" to view the maximum values for 5 seconds, press again to view the
minimum memory. To clear the memory record, press “CLEAR" while the respective values
displaying on screen.
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the 2 remote channels,
Replace the batteries and follow the setup procedure as mentioned in this instruction manual.
SPECIFICATIONS
Range of temperature measurement:
indoor unit : 0 C to 50 C (32F to 122F)
Remote sensor : -20 C to 60 C (14F to iSBF), lowest -50 C (-58F) using extension cord
Transmission : Max. (WM (100 it.) open area. RF434 MHz
Resolution ‘ 0.1 degree
Battery lite : 1 year (alkaline batteries recommended)
NOTE: This equipment has keen tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates. uses and an radiate radio
frequency energy and. if not installed and used in accordance with the
Instructions, may cause harmtul interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installufion.
if this equipment does cause harmful interference to radio or television reception.
which can be determined by turning the equipment off and on. the user Is
encouraged to try to correct the interference by one or more of "re following measures:
- - Roorient or relocate the receiving antenna.
- - Increase thc separation between the equipment and receiver.
- - Connect the equipment into an outlet on a circuit different from that to which
the receiver Is connected.
- - Consult the dealer or an experienced rsdinrrv tachnician for help,
REMARK: Modifications not authorized by the manufacturer may void users
authority to operate this device,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : .穨.七月 23, 2003 (3)
Create Date                     : 2003:07:23 15:31:49
Title                           : .穨.(3)
Producer                        : Acrobat PDFWriter 4.0 for Windows

EXIF Metadata provided by EXIF.tools