Jastec JFCM-1000 Vehicle Fleet Management Service System User Manual 1

Jastec Co., Ltd. Vehicle Fleet Management Service System 1

Contents

User Manual

von-F Manual Instruction
von-F Information This confidential information is not supposed to disclosed and misused to the third party 1 •Certified Business Name: Jastec Co.,Ltd. •Device (model): Vehicle Fleet Management Service System •Manufacture date: Jan, 2013 •Manufacturer/country : Jastec Co,Ltd./Korea •Certified code : JS0 •A radio interference of this wireless module is not providing a service related the safety of life.
This confidential information is not supposed to disclosed and misused to the third party 2 We kindly recommend you to be fully aware of using a product accurately and for safety of user. All liabilities by uncomplying cautions are not supposed to be responsible to manufacturer. 1. This product into water or prolonged exposure to moisture can cause failure resulting in no charge for broken A/S. 2. Do not disassemble or repair this product if the label seal is broken or damaged, free A/S will not be received. 3. Do not separate or equip von-F module while driving vehicle or ignition off. – This causes to car accident and defective of it. 4. Please note that on the surface of the product carefully to avoid strong detergent or chemicals. 5. This product works under the proper temperature -30~+70℃. 6. Do not impact the product. It’s the cause of product defective. 7. Using other products rated voltage is the cause of the crush. Rated voltage state must be sure to use the product. 8. After parking vehicle in a safe place, install von-F module then drive. 9. When installing or removing product on the vehicle as the vehicle peripheral device could be due to injury, Please be careful. 10. Incorrect installation of the product by the vehicle’s shock and vibration and can cause data loss, after the installation, please check it properly. 11. Products by shock or vibration of the vehicle is released from the car because it can cause data loss if the installation status checks on a regular basis. This product is equipped with a breakdown of the car by the impact of accidents, damage, of driving record, we are not responsible for missing. Cautions For Safety
1. von-F Descriptions This confidential information is not supposed to disclosed and misused to the third party 3 1.1 Overview von-F as vehicle Fleet Management Service System designed to collect a vehicle driving information from ECU(Electronic Control Unit) By OBD standard protocol communication and can be saved a driving logs by connecting to PC. GPS
This confidential information is not supposed to disclosed and misused to the third party 4 1.2 Specifications 1. von-F Descriptions Item Description CPU Processor In-Vehicle Protocol Vehicle Data Links RS-232 Analog/Digital Input Relay Drive Output Reference Drive Output Supported Functions Vehicle Interface USB Port CDMA or GSM/GPRS G-Sensor GPS USB Port Power 32-bit ARM Cortex-M3(256KB Flash, 64KB SRAM) ISO 9141-2, ISO 14230-4(KWP-2000),ISO 15765-4(CAN), SAE J1850(PWM/VPWM) - SAE J1939 : Battery Source, Backup Battery, Ignition, GND,CAN High, CAN Low - SAE J1708 : Battery Source, Backup Battery, Ignition, GND,J1708+, J1708- 1 Port(TX, RX & GND), 115,200BPS 6 Ports 4 Ports (Max 0.5A/24V) 1 Ports (Max 0.5A/5V) SAE J1979 Mode $01~$0A SAE J1962 Standard OBD-II 16 PIN Connector USB 2.0 Compatible, VCP(Vitural COM Port) Supported 800/1900 MHz 1xRTT, GSM/GPRS/EDGE 850/900/1800/1900MHz Bosch 3-Axis 10-Bit Resolution, BMA150 SGPS, AGPS, gpsOneXTRA-tm USB 2.0 Compatible, VCP(Vitural COM Port) Supported Automotive grade 8 - 36V
This confidential information is not supposed to disclosed and misused to the third party 5 1.3 Functions Driving logs record Saving vehicle information. Collecting and saving driving logs information. Vehicle identification information / module certification / module serial number information / driving data starting time and ending time / ignition On and Off time / Accumulated driving distance / module connection and disconnection time / driving information transmitting time / acceleration pedal or throttle valve open angle Driving information security Encoded saving data to not modify a driving recorded information. Driving information upload CDMA 1x transmitter preferred. Power saving function Automatically power will be off when ignition off. Self diagnostic Supporting self diagnostic function through von-F module operating check (Indicator). Firmware upgrade support Supporting firmware upgrade 1. von-F Descriptions
This confidential information is not supposed to disclosed and misused to the third party 6 1.4 Specification Specification CPU 32 bit ARMv7 Cortex-M3 LED Display LED Vehicle protocol SAE J1939, SAE J1708 Connector type SAE J1962 OBD-II 16Pin Standard Connector Power DC 12V / 24V vehicle Battery Power consumption Max power consumption: ≤2000mW [saving mode] : ≤50mW Case Color: Black, Material: ABS Size [W]160mm X [D]80mm X [H]30mm Weight 180 g Operating temperature -30 ~ 70℃ External interface specification USB USB 1.1(2.0 Compatible) VCP(Virtual COM Port) Supported CDMA 1xRTT (JTBT1100) 800/1900 MHz 1xRTT, GPSoneXTRA-tm CDMA 1xRTT FL/RL : 153Kbps 1. von-F Descriptions
This confidential information is not supposed to disclosed and misused to the third party 7 1.4 Composition Name Function von-F module Connection to vehicle von-F connector. DLC cable Between Vehicle and von-F Module Quick Start Manual Quick guide manual Program installation CD von-F PC Manager installation program, included in user’s manual. 1. von-F Descriptions
This confidential information is not supposed to disclosed and misused to the third party 8 1.5 Body description Front display LED 4-Indicator display LED DLC connector Connect to vehicle OBD diagnostic port. DI/DO Connector Optional Back RF Connector Port CDMA Ant Port, GPS Ant Port USB Connector F/W Update Connector 1. von-F Descriptions
This confidential information is not supposed to disclosed and misused to the third party 9 2.1 von-F module installation von-F module installation is following below order. 1. von-F module installation requires after vehicle parking in safety area. ** Caution : A side brake or foot brake should be locked and shift also checked on the parking position. 2. Please check vehicle engine should be off when if ignition on 2. Product Instructions
This confidential information is not supposed to disclosed and misused to the third party 10 2.3 von-F module separation ** Caution : von-F module separation should be performed at safety area after parking. ** Caution : The separation from vehicle is prohibited if not the purpose of driving data saving or transmitting. ** Caution : Performing von-F module separation on ignition on may be caused to data loss or module damaged. 1. Turn vehicle ignition off. 2. Pull von-F module from vehicle OBD diagnostic Cable then separating it. 2. Product Instructions
This confidential information is not supposed to disclosed and misused to the third party 11 3.2 Warranty Service 1. Warranty Period : 1 year 2. Warranty Details 1) Any defective or damage within warranty period can be repaired free A/S service or exchanged as free of charge. 2) Any damage or defective by customer’s misuse is not allowed free exchange or free charged A/S service. 3. Exchange and Return 1) An exchange or return is possible within 1 week after purchase if not opening box. 2) A shipping charge against retuning product because of just customer’s changed mind may be paid by customer. 4. Others 1) Warranty period is valid only for 12 months from manufacturing date if not checking a purchasing date. 2) Repair charge will be billed even though it’s warranty period as below. - Defective by user’s misuse (impact/flooded/fault) - Dismantle or alteration by user’s intention. - Defective by natural disaster. - Repaired not in official After Sales service centre. 3) Please contact to A/S call service centre for repair charges. A/S call service : (031-719-5170 Extension : 206) 3. Warranty & After Sale Service
This confidential information is not supposed to disclosed and misused to the third party FCC ID : UK4JFCM-1000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.

Navigation menu