Jbl E60 Users Manual

JBL Speaker E50 10783436

E80 to the manual d284de29-34a5-41ee-9aee-a1f0ee1a5a2b

d284de29-34a5-41ee-9.. d284de29-34a5-41ee-9aee-a1f0ee1a5a2b

2015-02-04

: Jbl Jbl-E60-Users-Manual-369343 jbl-e60-users-manual-369343 jbl pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

SPEAKER PLACEMENT
Proper placement of the
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the
loudspeakers. Use these
placement recommendations
as a guide. Slight variations
will not diminish your listening
pleasure.

this guide are video-shielded
and can safely be placed near
a television.
MODELS: E60, E80, E90, E100

All of the Northridge E Series
loudspeakers referred to in

MODELS: E30, E50
As front speakers

As surround speakers

5 – 6 ft.
(1.5m–1.8m)

MODEL: EC35
(0–0,6m)

The EC35 center channel
loudspeaker is designed to
complement all of the
Northridge E Series loudspeakers. It is the ideal way to
re-create the cinematic experience in your home.

NORTHRIDGE™ E SERIES
E30, E50, E60, E80, E90,
E100, EC35

OWNER’S GUIDE

SPEAKER CONNECTIONS

MODELS: E30,
E50, E60, E80,
E90, E100
RIGHT

–

LEFT

–

– +

–

RIGHT

LEFT

Receiver’s Speaker Outputs

MODEL: EC35
CENTER

–

+
–

CENTER
Receiver
Speaker Outputs

Speakers and electronics terminals have corresponding (+)
and (–) terminals. It is important to connect both speakers
identically: (+) on the speaker
to (+) on the amplifier and (–)
on the speaker to (–) on the
amplifier. Wiring “out of
phase” results in thin sound,
weak bass and poor imaging.
To use the binding-post
speaker terminals, unscrew
the colored collar until the
pass-through hole in the center post is visible. Insert the
bare end of the wire through
this hole; then screw the collar
down until the connection
is tight.

The hole in the center of each
collar is intended for use with
banana-type connectors. To
comply with European CE certification, these holes are
blocked with plastic inserts at
the point of manufacture. To
use banana-type connectors
requires the removal of the
inserts. Do not remove these
inserts if you are using the
product in an area covered by
the European CE certification.
BI-WIRING
The bi-wire connection
method requires one amplifier
and two sets of speaker wires.
By removing the shorting bars,
connections may be made to
the individual network sections
using four conductors, one for
each of the four terminals.
For single-wire connection,
leave the shorting bars in
place and connect only a single set of speaker wires (two
conductors) to the two upper
terminals.

High Frequency
–
+

–
+
Low Frequency

–
+
Amplifier
Bi-Wire Connections

MODELS: E30, EC35, E50

The supplied self-adhesive
rubber feet may be attached
to the bottom corners of your
speakers to protect your
furniture.
MODELS: E60, E80, E90,
E100

These models feature four
rubber feet that enable them to
be placed on a smoothsurfaced floor, such as tile or
hardwood. Four metal spikes
are supplied for use when the
speaker is to be placed on a
carpeted surface, to decouple
the speaker from the floor and
prevent unwanted damping. To
insert the spikes, gently lay the
speaker on its side (not its
front or back) on a soft,
nonabrasive surface. Each
spike screws into the threaded
insert in the center of each
rubber foot. Make sure all
four spikes are screwed in
completely for stability.
NEVER drag the speaker to
move it, as this will damage
the spikes, the feet and/or the
wood cabinet itself. Always lift
the speaker and carry it to its
new location.
CAUTION: Floorstanding
(tower) loudspeakers have a
high center of gravity and may
become unstable and tip over
during earthquakes, or if
rocked, tipped or improperly
positioned. If this is a concern,
these speakers should be
anchored to the wall behind
them, using the same procedures and hardware customary for anchoring bookcases
and wall units. The customer is
responsible for proper installation and proper selection of
hardware.

TROUBLESHOOTING
If there is no sound from
any of the speakers:

• Check that receiver/amplifier is on and that a source is
playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming from one speaker:

• Check the “Balance”
control on your receiver/
amplifier.
• Check all wires and connections between receiver/
amplifier and speakers.
• Make sure no wires are
touching other wires or
terminals and creating a short
circuit.
• Make sure all wires are
connected. Make sure none
of the speaker wires are
frayed, cut or punctured.
• In Dolby* Digital or DTS®
modes, make sure that the
receiver/processor is configured so that the speaker in
question is enabled.
• Turn off all electronics and
switch the speaker in question with one of the other
speakers that is working correctly. Turn everything back
on, and determine whether
the problem has followed the
speakers, or has remained in
the same channel. If the problem is in the same channel,
the source of the problem is
most likely with your receiver
or amplifier, and you should
consult the owner’s manual for
that product for
further information. If the problem has followed the speaker,
consult your dealer for further
assistance or, if that is not
possible, visit www.jbl.com
for further
information.

If the system plays at
low volumes but shuts
off as volume is
increased:

• Check all wires and connections between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none
of the speaker wires are
frayed, cut or punctured.
• If more than one pair of
main speakers is being used,
check the minimum impedance requirements of your
receiver/amplifier.
If there is no (or low)
bass output:

• Make sure the polarities
(+ and –) of the left and right
“Speaker Inputs” are
connected properly.
• Consider adding a powered
subwoofer to your system for
use with digital “.1” surround
formats.

If there is no sound from
the surround speakers:

• Check all wires and connections between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the
speaker wires are frayed,
cut or punctured.
• Review proper operation of
your receiver/amplifier and its
surround sound features.
• Make sure the movie or TV
show you are watching is
recorded in a surround sound
mode. If it is not, check to see
whether your receiver/ amplifier has other surround
modes you may use.
• In Dolby Digital or DTS
modes, make sure your
receiver/processor is configured so that the surround
speakers are enabled.
• Review the operation of your
DVD player and the jacket of
your DVD to make sure that the
DVD features the desired
Dolby Digital or DTS mode,
and that you have properly
selected that mode using both
the DVD player’s menu and the
DVD disc’s menu.

Declaration of Conformity

We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the products
described in this owner’s manual are in compliance
with technical standards:
EN 50081-1:1992
EN 50082-1:1997
Gary Mardell
Harman Consumer International
Chateau-du-Loir, France 8/03

SPECIFICATIONS
E30

E50

E80

E90

E100

EC35

Description
2-Way 6" bookshelf

Description
Description
3-Way, 8"
3-Way 8"
horizontal/vertical
floorstanding
mirror-image bookshelf

E60

Description
3-Way dual
6" floorstanding

Description
3-Way dual
8" floorstanding

Description
3-Way dual
10" floorstanding

Description
3-Way dual
5" center

Max. Recommended
Amplifier Power**
125W

Max. Recommended
Amplifier Power**
175W

Max. Recommended
Amplifier Power**
200W

Max. Recommended
Amplifier Power**
225W

Max. Recommended
Amplifier Power**
250W

Max. Recommended
Amplifier Power**
150W

Power Handling
(Continuous/Peak)
70W/280W

Power Handling
(Continuous/Peak)
90W/360W

Power Handling
(Continuous/Peak)
100W/400W

Power Handling
(Continuous/Peak)
110W/440W

Power Handling
(Continuous/Peak)
125W/500W

Power Handling
(Continuous/Peak)
75W/300W

Nominal Impedance
8 Ohms

Sensitivity (2.83V/1m)
88dB

Sensitivity (2.83V/1m)
90dB

Sensitivity (2.83V/1m)
91dB

Frequency
Response (–3dB)
50Hz – 20kHz

Frequency
Response (–3dB)
45Hz – 20kHz

Frequency
Response (–3dB)
40Hz – 20kHz

Frequency
Response (–3dB)
38Hz – 20kHz

Frequency
Response (–3dB)
36Hz – 20kHz

Frequency
Response (–3dB)
33Hz – 20kHz

Frequency
Response (–3dB)
75Hz – 20kHz

Crossover
Frequency
4000Hz

Crossover
Frequencies
800Hz, 3200Hz

Crossover
Frequencies
1000Hz, 4000Hz

Crossover
Frequencies
300Hz, 4000Hz

Crossover
Frequencies
1000Hz, 5000Hz

Crossover
Frequencies
800Hz, 3200Hz

High-Frequency
Transducer
19mm Titaniumlaminate
dome, shielded

Midrange Transducer
NA

Midrange Transducer
100mm PolyPlas,™
shielded

Midrange Transducer Midrange Transducer
100mm PolyPlas,™
100mm PolyPlas,™
shielded
shielded

Midrange Transducer
100mm PolyPlas,™
shielded

Midrange Transducer Midrange Transducer
100mm PolyPlas,™
75mm PolyPlas,™
shielded
shielded

Low-Frequency
Transducer
170mm PolyPlas,™
shielded

Low-Frequency
Transducer
200mm PolyPlas,™
shielded

Low-Frequency
Transducers
Dual 170mm PolyPlas,™
shielded

Low-Frequency
Transducers
Dual 200mm PolyPlas,™
shielded

Low-Frequency
Low-Frequency
Transducers
Transducers
Dual 250mm PolyPlas,™ Dual 133mm PolyPlas,™
shielded
shielded

Baffle
Low diffraction,
IsoPower™

Port
FreeFlow™ flared

Ports
Port
Dual FreeFlow™ flared FreeFlow™ flared

Port
FreeFlow™ flared

Network
Straight-Line
Signal Path™ (SSP)

Terminals
Terminals
Terminals
Terminals
Terminals
Terminals
Terminals
Gold-plated, 5-way
Gold-plated, 5-way
Gold-plated, 5-way
Gold-plated, 5-way
Gold-plated, 5-way
Gold-plated, 5-way
Gold-plated, 5-way
binding posts, bi-wirable binding posts, bi-wirable binding posts, bi-wirable binding posts, bi-wirable binding posts, bi-wirable binding posts, bi-wirable binding posts, bi-wirable
Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D)
381mm x 213mm x 305mm 292mm x 445mm x 311mm 927mm x 251mm x 305mm 927mmx 213mm x 343mm 1022mm x 251mm x 368mm 1067mm x 311mm x 368mm185mm x 558mm x 264mm
Weight Per Speaker
16.3 lb/7.4kg

Weight Per Speaker
25 lb/11.4kg

Weight Per Speaker
35 lb/15.9kg

Weight Per Speaker
40 lb/18.2kg

Weight Per Speaker
48 lb/21.8kg

Weight Per Speaker
55 lb/25kg

Weight Per Speaker
22 lb/10kg

PRO SOUND COMES HOME™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
2, route de Tours, 72500 Chateau-du-Loir, France
516.255.4JBL (4525) www.jbl.com
© 2003 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International Industries, Incorporated.
Part No.350038-002

* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
** The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
All features and specifications are subject to change without notice.
All dimensions include grilles and feet, but not spikes.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 4
Create Date                     : 2003:08:13 18:25:54
Producer                        : Agfa Apogee Normalizer

EXIF Metadata provided by EXIF.tools

Jbl E60 Users Manual

JBL Speaker E50 10783436

E80 to the manual d284de29-34a5-41ee-9aee-a1f0ee1a5a2b

d284de29-34a5-41ee-9.. d284de29-34a5-41ee-9aee-a1f0ee1a5a2b

Navigation menu

Versions of this User Manual:

Views

Navigation