Jeckson Electric 547-36-005RF 36 Inches Outdoor Fireplace (433MHz Rx) User Manual
Jeckson Electric Co., Ltd 36 Inches Outdoor Fireplace (433MHz Rx)
User Manual
Owner's Manual
Outdoor Fireplace
MODEL: 36—005RF
Transmitter: FCC ID: ELY547-47-1010T IC 1492A—471010T
Receiver: FCC ID: ELY547-36-005RF lC 1492A-36005RF
REMOTE CONTROL
(A The remote control has a range of approximately 50 ft.
F r) I (15425m). It does not have to be pointed at the fireplace
gr ‘ and can pass through most obstacles (including walls). It is
i i supplied with 2187 independent frequencies to prevent
I I ‘ interference with other units.
BATTERY INSTALLATION
1. Depress tab on the battery cover on the back of the remote transmitter and remove
batten] cover.
2. Install a 12V alkaline battery into the remote control.
3. Replace the battery cover.
REMOTE CONTROL FUNCTION
Press the ON/OFF button to turn the Flame and Light On/Ofi.
NOTE
There is no function for the Remote Control when the Main Switch on the Switch Board is
OFF.
RECEIVER MAIN BOARD
Top Flame
Light Light
> A < 1 Speed “
DC‘IZV ' ’ u S "
om ‘ '
.12\' inle
Antenna
AUDIO BOARD
Audio ‘
Input '
("1sz In
SWITCH BOARD
1. Locate and connect the correct the input and output terminals to the correct terminals.
MAIN SWITCH
0 Press the Main Switch to turn ON/OFF the Flame and the Light.
TOP LIGHT CONTROL
o Press the Up or Down direction button to increase or decrease the Light Intensity.
FLAME CONTROL
o Press the Up or Down direction button to increase or decrease the Flame speed.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment,
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation, This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
u Reorient or relocate the receiving antenna.
2 Increase the separation between the equipment and receiver,
L Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
l, u Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Specifications
1. input voltage ................................... 12VAC+-10%, GOHZ
DC12V+-10%
2. Output voltage (for audio supply voltage ..
3. Output current
Regulator tit .i.700mA+—50mA
.. .300mA+-30mA
Regulator #3 .................................................................................................................. 300mA+v30mA
O~4O C
25~+60 C
Regulatorfl
4. Operating Temperature
5. Storage Temperature ..
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2007:05:22 15:29:11+08:00 Create Date : 2007:05:22 15:28:01+08:00 Metadata Date : 2007:05:22 15:29:11+08:00 Format : application/pdf Document ID : uuid:abb5c86d-dc1c-4272-8b70-2815d13e2791 Instance ID : uuid:9a6474b9-3116-44f4-944c-8545116f573e Page Count : 4EXIF Metadata provided by EXIF.tools