Jensen Speaker Sl212 Users Manual SL210_212

SL212 to the manual da3db25a-f951-48aa-86a6-dfcbfe0ed4cb

: Jensen Jensen-Speaker-Sl212-Users-Manual-341967 jensen-speaker-sl212-users-manual-341967 jensen pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Jensen SL210/212 Slot-Loaded Subs Quick Start Guide

Connecting 12V DC Power for
Lighting

12V DC Input for Jensen Lighting

The lighting features of all Jensen
products require a 12 volt power source to
operate. The polarity (+ and -) indicators
for each set of inputs also appear on the
terminal cup.

Head Unit
+
12 volt switched
+ DC source

Do not connect an amplifier or any audio
source to Jensen lighting inputs. Inputs
are designed for a switched 12-Volt DC
power source only. Do not connect your
Jensen product directly to your battery, as
it will cause your battery to discharge.

WARNING: The rectangular shape of the
Subwoofer provides increased resistance to
tipping. To avoid vehicle damage or personal
injury that may occur should the enclosure become
detached, please ensure that the enclosure is
securely mounted to a surface with adequate strength
and rigidity to support it under stress conditions such
as road vibration and sudden stops.
NOTICE: There are no removable or serviceable parts
on the speaker. Tampering with the speaker or any of
it's components will damage the speaker and void the
warranty.
CARE AND CLEANING: Fingerprints and smudges
can be removed from the acrylic by buffing lightly with
a lint-free cloth. Light scratches can be buffed out by
using an acrylic/plexi polish or fine rubbing compound;
however, avoid getting any compound on the cabinet
carpeting. The enclosure is the same material used
for premium quality home audio speakers, but
covered with carpet instead of veneer. Dirt on the
carpet can be cleaned with common carpet cleaners
and a brush.

Be sure to maintain polarity. and be sure
to connect to a constant switched 12 volt
source. Connect the switched positive (+)
12 volt wire to the Positive (+) lighting
input terminal and connect the negative
(- ) lighting input terminal to a good
chassis ground or negative (- ) ground

+12V

Chassis
Ground

-

+

NOTE: Must use 12 volt switched output ONLY.

SL212

Wiring Your Bass Enclosure

NOMINAL IMPEDANCE: 4 OHM
150 Marcus Blvd •

Audiovox Electronics Corporation
Hauppauge, New York 11788 • ©2007 Audiovox Electronics Corporation
MADE IN CHINA

Connect the positive (+) wire from amplifier output to
the positive terminal (red) on enclosure.
Connect the negative (-) wire from the amplifier output
to the negative terminal (black) on enclosure.

Need help? For technical assistance, call the Jensen customer support line at 1-800-323-4815.

Limited Warranty

DO NOT RETURN THIS PRODUCT TO THE STORE

Speakers, Bandpass Enclosures and Subwoofers
Audiovox Electronics Corporation (“the Company”) is committed to quality and
customer service, and are pleased to offer you this Warranty. Please read it
thoroughly and contract the Company at 1-800-323-4815 with any questions.
Who is covered?
The Company extends this warranty to the original retail purchaser of products purchased
through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada. This
warranty is not transferable or assignable. Proof of purchase is required in the form of an
original sales receipt.
What is covered?
The Company warrants that should this product or any part thereof, under normal use, be
proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced with a new or reconditioned product (at
the Company's option) without charge for parts and repair labor.
What is not covered?
This Warranty does not cover the following:
•
Damage incurred during shipping or transporting the product to the Company
or a service center
•
Elimination of car static or motor noise
•
Defects in cosmetic, decorative or non-operative structural parts
•
Costs incurred for installation, removal or reinstallation of the product
•
Consequential damage to any included plexiglass or lighting (i.e. neon or LED
lights), accessories, or vehicle electrical systems
•
Damage caused by improper installation, mishandling, misuse, neglect,
accident, blown fuse, battery leakage, theft or improper storage; burned voice
coils caused by over-driving the speaker; or mechanical failures due to
punctures or tears
•
Products whose factory serial number/bar code label(s) or markings have been
removed or defaced
•
Damage resulting from moisture, humidity, excessive temperature, extreme
environmental conditions or external natural causes
Please review the “Care and Maintenance” section of your Installation and
Operation Manual for additional information regarding the proper use of your
product.

Limitations
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A
PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. No person or representative is authorized to assume
for the Company any liability other than expressed herein in connection with the sale
of this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above limitations
or exclusions may not apply to you. This Warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
Obtaining Warranty Service
•
To obtain repair or replacement within the terms of this Warranty, call
1-800-323-4815 for the location of a warranty station serving your
area.
•
You must prepay the initial shipping charges to the Company. The
Company will pay the return shipping charges for all warranteed
products returned to an address within the U.S.A., Puerto Rico or
Canada.
•
Please package the product securely to avoid shipping damage. We
recommend using a carrier that provides tracking service to prevent
lost packages. Lost or damaged packages are not covered by this
warranty.
•
Provide a detailed description of the problem(s) for which you require
service.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 3.0.0.667
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : HP_Administrator
Title                           : SL210_212.cdr
Creator Tool                    : CorelDRAW
Modify Date                     : 2007:04:13 16:27:55-04:00
Metadata Date                   : 2007:04:13 16:27:55-04:00
Document ID                     : uuid:a0eb9d0d-458b-451f-a4b2-c47f65175d6a
Instance ID                     : uuid:d688e6ce-5f0b-40e7-af7d-1eb57b53a0e0
Page Count                      : 2
Create Date                     : D:20070411201015
Author                          : HP_Administrator

EXIF Metadata provided by EXIF.tools