JiangSu HuiTong Group JSHT-YKF439 BLE Remote Control Transmitter User Manual Operation Introduce

JiangSu HuiTong Group Co.,Ltd BLE Remote Control Transmitter Operation Introduce

Users Manual

Jiang Su HuiTong Group Co.,LtdVersion: V0.3 Part No: YKF439-B001Classification:Page 1of 215/12/2017USER MANUAL1 PairPress the Home button for 9 seconds, release the button, and the remote control begins to sendbroadcasting. After pairing with the host the remote control should be able to control the hostBTW:A: When you do the pairing, make sure that the host is turned on, and it is in pairing mode, and make theremote control to close the host as close as possible.B: If the host is not paired with the host within 1 minutes, please check and confirm that the host side is inthe pairing mode. After confirmation, repeat the A pairing operation.2 UnpairPress the Left+Back+Option button at the same time for 12 seconds, release the button, the remotecleared the existing pairing information and begins to send a pair broadcast3 VoiceAfter pressing the voice button, the remote controller begins to transmit the voice.(When using the voice function, you should try to keep the remote control MIC close to the sound source.)FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.
Jiang Su HuiTong Group Co.,LtdVersion: V0.3 Part No: YKF439-B001Classification:Page 2of 215/12/20172. Changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used inportable exposure condition without restriction.

Navigation menu