Jiangmen Dascom Computer Peripherals DP541A Portable Receipt and Label Printer User Manual user munual
Jiangmen Dascom Computer Peripherals Co.,Ltd. Portable Receipt and Label Printer user munual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3686969 |
| Application ID | Xukaxw4QYpvXmbL8lgTUVw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 86.25kB (1078135 bits) |
| Date Submitted | 2017-12-21 00:00:00 |
| Date Available | 2017-12-21 00:00:00 |
| Creation Date | 2017-12-20 17:14:09 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-12-20 17:14:09 |
| Document Title | Microsoft Word - user munual |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
DP‐5 541 Series Operator’ss Manu ual DP-5 541 Therm mal Prin nterr FCC Part 15 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Canadian and FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Normal use, please keep the torso down 50 mm distance Part 15.21 Caution: Changes or modifications not expressly approved by Dascom, could void the user’s authority to operate the equipment. Canadian Department of Communications Radio Interference Statement www.dascom.com This device co omplies with In ndustry Canada a license‐exemp pt RSS standard d(s). Operation n is subject to tthe following tw wo conditions: 1) this device m may not cause in nterference; 2) this device mu ust accept any interference, in ncluding may cause e undesired ope eration of the device. Under Industry Canad da regulations, this radio interference that transmitter may m only operatte using an anttenna of a type and maximum m (or lesser) gaiin approved forr the transmittter by Industry Ca anada. To redu uce potential raadio interferen nce to other use ers, the antenn na type and its gain should be so chosen tha at the equivalen nt isotropicallyy radiated powe er (e.i.r.p.) is not more than that necessary ffor successful communicatio on. Maximum power output plus maximum m antenna gain of the EUT is: 4.5W/m , Limiit is 10Wm . pareil est confo orme aux CNR d'Industrie Can nada applicablees aux appareiils radio exemp pts de licence. Le présent app aux deux condiitions suivantees : (1) l'appareiil ne doit pas produire L'exploitation n est autorisée a de brou uillage, et (2) l'utilisateur dee l'appareil doiit accepter toutt brouillage rad dioélectrique su ubi, même si lee brouillage estt susceptible d'een compromettree le fonctionneement. Conform mément à la rééglementation d d'Industrie Can nada, le présen nt émetteur rad dio peut fonctionner avec une a antenne d'un tyype et d'un gain n maximal (ou iinférieur) apprrouvé pour l'ém metteur par Industrie Cana ada. Dans le but dee réduire les rissques de brouilllage radioélecttrique à l'intention des autress utilisateurs, ill faut choisir le type d'antenn ne et son gain d de sorte que la puissance isotrrope rayonnéee équivalente (p p.i.r.e.) ne dépa asse pas l'intensité néccessaire à l'étab blissement d'un ne communication satisfaisan nte. La puissan nce de sortie ma aximale plus ga ain d'antenne ma aximal du EUT est e : 4.5W/m Limite est 10W W/m Battery Disposal Only disposee of used batteeries according to your locaal regulations. If you do not know your local regulations, the t Rechargeaable Battery Recycling Corpporation (RBR RC) is a non-pprofit organizaation created to prromote recycliing of recharggeable batteriees. For more information viisit www.rbrc.org. Acknowledggments: Zebra, CPCL L and ZPLare registered traademarks of Zebra Technoloogies Wi-Fi is a reegistered tradeemark of the Wi-Fi Alliancee Windows is a registered trrademark of Microsoft Corpporation demarks are thhe property off their respective owners. All other trad © 2017 by DASCOM. Alll rights reservved. Read d all set up and operating instru uctions before proceeding with operation. Do not operate in a an enclosure un nless properly ventilated. Do o not operate ne ear a heat sourcce. Lesen n Sie vor der Inb betriebnahme die d Aufbau- und Bedienungsanlleitung Betreibe en Sie den Druccker nicht in einem kleinen, geschlossenen n Raum, es sei denn dieser wirrd ordnungsgem mäß belüftet. Ne ehmen Sie den Drucker nicht in n der Nähe einer Wärmequelle in Betrieb ser-serviceable parts inside. Refer service or repairs to a qua alified service prrofessional. Usse of genuine Da ascom replacem ment No us parts is require ed to warrant prroper, safe operration. Any alte eration or modification of this de evice voids the user warranty and a may make the ii www w.dascom.co om product unsafe to operate. The print head and motors get hot during use. Wait until they cool before touching them. Make certain the printer is disconnected from AC power before removing any covers or performing any required cleaning or maintenance. Connecting this printer to an ungrounded receptacle can result in electrical shock. Never place the printer near inflammable or explosive substances. Do not operate near liquid or spill liquid into the printer at any time. Enthält keine Teile, die vom Bediener instandgesetzt werden können. Bitte wenden Sie sich bei Instandsetzung oder Reparatur an qualifiziertes Kundendienstpersonal. Die Verwendung von echten Dascom Ersatzteilen ist notwendig, um ordnungsgemäßen, sicheren Betrieb zu gewährleisten. Änderungen oder Modifikationen dieses Geräts machen die Garantie ungültig und können den sicheren Betrieb des Produkts gefährden. Während des Druckens werden Druckerkopf und Motoren heiß. Warten Sie, bis sich die Teile abgekühlt haben, bevor Sie sie berühren. Vergewissern Sie sich, dass der Drucker nicht mehr an die Stromquelle angeschlossen ist, bevor Sie Abdeckungen abnehmen oder das Gerät reinigen bzw. warten. Schließen Sie diesen Drucker nicht an eine ungeerdete Steckdose an; dies kann zum Elektroschock führen. Setzen Sie den Drucker niemals in die Nähe von feuer- oder explosionsgefährlichen Stoffen. Betreiben Sie den Drucker nicht in der Nähe von Flüssigkeiten und lassen Sie keine Flüssigkeiten in den Drucker gelangen. Specifications are subject to change without notice. iii www.dascom.com TABLE OF CONTENTS Introduction ......................................................................................................................................................... 2 Printer Features .................................................................................................................................................. 3 Quick Start Instructions ..................................................................................................................................... 4 A. Paper Load ............................................................................................................................................... 4 B. Battery Installation .................................................................................................................................... 5 C. Charge Battery.......................................................................................................................................... 5 D. Power On .................................................................................................................................................. 5 E. Control Panel ............................................................................................................................................ 6 F. Performing a Printer Self-Test .................................................................................................................. 6 Configuration ...................................................................................................................................................... 7 A. Connectivity Parameters........................................................................................................................... 8 B. Image Parameters .................................................................................................................................. 12 C. Device Config ......................................................................................................................................... 13 D. Fonts ....................................................................................................................................................... 15 E. Graphics ................................................................................................................................................. 16 F. Update Printer Firmware, Upload Files to Printer Memory ..................................................................... 17 G. Reset Printer Configuration to Factory Defaults (Safe Mode) ................................................................ 17 Printing Modes .................................................................................................................................................. 18 A. ASCII Based Print Jobs .......................................................................................................................... 18 B. Graphic Based Print Jobs ....................................................................................................................... 18 Integrating the Printer into your Business Applications .............................................................................. 19 A. Windows Desktop Computers ................................................................................................................ 19 Print Drivers .................................................................................................................................................... 19 I. USB ................................................................................................................................................... 19 II. Wi-Fi .................................................................................................................................................. 20 B. Windows Tablets and Smartphones ....................................................................................................... 20 C. Android Tablets & Smart phones ............................................................................................................ 20 I. Wi- Fi ................................................................................................................................................. 21 D. Apple™ Tablets & Smartphones ............................................................................................................ 21 I. Wi-Fi .................................................................................................................................................. 21 Media ................................................................................................................................................................. 22 A. Standard Media ...................................................................................................................................... 22 B. Black Mark Media Position ..................................................................................................................... 22 Maintenance and Troubleshooting ................................................................................................................. 23 A. Cleaning.................................................................................................................................................. 23 B. Battery Care............................................................................................................................................ 23 I. Getting the Maximum Battery Life ..................................................................................................... 23 II. Charging the Battery .......................................................................................................................... 23 III. Additional Battery and Safety Information ......................................................................................... 24 IV. Testing the Power Adapter and Battery ............................................................................................. 24 C. Troubleshooting ...................................................................................................................................... 25 I. General Error Conditions ................................................................................................................... 25 II. Fault Description and Resolution ....................................................................................................... 25 D. Obtaining Service ................................................................................................................................... 26 APPENDIX ......................................................................................................................................................... 27 A. Appendix A – DP-541Printer Specifications ........................................................................................... 27 B. Appendix B – Supplies and Accessories ................................................................................................ 28 C. Appendix C – Media ............................................................................................................................... 29 D. Appendix D – Mounting Options ............................................................................................................. 29 Glossary of Terms ............................................................................................................................................ 30 Index .................................................................................................................................................................. 32 www.dascom.com Introduction Thank you for purchasing the Dascom DP-541 Series mobile thermal printer also referred to in this manual as the “DP-541”. The DP-541 series prints on special thermal media supplied in roll form up to 4.1 inches wide. All models are equipped with a USB port which supports cabled communications. All models support an optional internal Wi-Fi interface. Complete specifications may be found in Appendix A – DP-541Printer Specifications. The remainder of this manual focuses on preparing the printer for initial use and performing tasks that will be encountered during daily use. Maintenance describes how to maintain the printer for optimal performance and has information on how to diagnose any problems that may occur. Dascom recommends using genuine Dascom supplied media and accessories. For detailed lists and contact information, please see Appendix B – Supplies and Accessories&Appendix C – Media. www.dascom.com Printer Features USB Data Port Power Port Control Panel Button Door Door Release Paper Compartment Your DP-541features: Easy-to-read control face and simple drop-in paper loading Quickly prints a wide variety of tickets, and receipts. IP54 rated for water and dust resistance... plus rated for repeated 6-foot drops to concrete Print speeds up to 5 ips Extensive fonts, character sets, bar codes and graphic capabilities Printer configuration is quick and easy with a web based interface The latest in battery technology provides for full-shift printing in all modes Compatible with Windows, Windows Mobile, Apple iOS, and Android Emulations that allow the printer to be a drop-in replacement for nearly any mobile printer For detailed specifications reference Appendix A – DP-541Printer Specifications. www.dascom.com Quick Start Instructions A. Paper Load Tear paper towards back of printer Press Paper Compartment Door release button to open. Pull small leader of paper out and close door; “clicks” when properly closed. NOTE: When using 3” paper, install spacer P/N: 93194 www.dascom.com B. Battery Installation Loosen hand strap (not pictured) to access battery door. Press button to see Battery charge level. 4 LED 100% charge 3 LED 75% 2 LED 50% 1 LED 25% Rotate knob 1800 to unlock battery door. Drop in battery. Use Bay Chargers or AC/DC Power Adapter to charge. Close battery door and rotate knob 1800 to lock. Please contact your Printek Sales representative for price and availability. C. Charge Battery Uncover the printer ports and plug in your AC power adapter to the Power port (must be a Dascomsupplied accessory). The yellow LED will show solid ON while the printer battery is charging. D. Power On Depress the Power button on the control panel. The green LED and the red LED will both be lit while the printer is going through its startup sequence (about 10 seconds). The red LED will go off, leaving the green LED on to indicate the printer is ready to print. www.dascom.com E. Control Panel Control Panel Power Button Paper Feed Button Power & Status (Green/Red) On On On Flashing Flashing Flashing Solid, Flashes Off Every 2 Seconds Power Up Power Down Toggle IP over USB on/off Press & Release Press & Hold Press twice Advance paper Print Setup Report Press once Press twice Battery (Yellow) Alert (Red) Indication Off Off Off Off Off Off On Off Flashing Off Off Flashing Off Off Solid Flashing F. Performing a Printer Self-Test With power on, press the paper feed button twice quickly. www.dascom.com Booting up Ready Paper Error/Lid Open Job is arriving Job is printing IP over USB active Wireless Personal Area Network active Charging Battery Battery Low Configuration Configuration of the DP-541 printer is done through a built-in web page. This allows you to configure the printer from any device that has a browser and is compatible with your DP-541 communication capabilities. 1. Turn the printer ON. 2. Connect a USB cable between the printer and a PC. 3. To access the DP-541 web page, push the Power button twice rapidly. This will put the printer into Configuration mode. 4. When the printer is in Configuration mode the POWER and FAULT LEDs will flash together. a. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear: FP541 Configuration Interface b. Type “0000” and hit Enter- you should now be at the home page for DP-541 Configuration. www.dascom.com 5. The main configuration screen of the DP-541: This is an overview of the printer configuration. The battery icon shows the relative charge in the battery. The more bars, the higher the charge. An AC plug will appear in the battery icon when the printer is plugged into an external power source. To return the printer to normal operating mode, double-click the Power button. The POWER LED will be returned to a solid light. At the top of the Main Page are selections to access the sub-menus. Wherever the book icon appears in the printer configuration pages, click it to access the user manual pages for help. A. Connectivity Parameters This page allows you to setup the connection to your printer. Depending on the optional interface installed, you will see WI-FI Config. In the detailed descriptions, an asterisk (*) indicates the factory default value. www.dascom.com WI-FI Config: Wireless Configuration This will display the current Wi-Fi configuration: IP Address – user defined. If Static Address Method is selected, type in the address the printer will use on the network. SubNetMask – user defined. If Static Address Method is selected, type in the subnet mark of the network. GateWay – user defined. If Static Address Method is selected, type in the gateway address of the network. WiFi Port – user defined. Type in the IP port to be used by the printer. (default value = 8023) Address Method – user selectable Static – printer will always connect to the network using the IP address defined. DHCP – printer will acquire an IP address from your network DHCP server Personal Area Network –The printer will broadcast itself as a network connection. The Power LED will flash off every two seconds while in this mode. The SSID will be the serial number of the printer. When connecting to the printer, the passphrase is the printer’s serial number. Personal Area Network mode can also be activated outside of the printer web page. To enter Personal Area Network mode, press and hold the Power and Paper Feed buttons until the Power and Alert LEDs light. Release both buttons, and the printer will restart in Personal Area Network mode. To exit Personal Area Network mode, press and hold the Power and Paper Feed buttons until the Power and Alert LEDs light. Release both buttons, and the printer will restart in normal Wi-Fi mode. www.dascom.com Available Networks – access points detected by the printer will be displayed. Select Add/Connect to use one of these access points. Previously Connected Networks – access points detected by the printer or added through Add/Edit Network will be displayed. Select Connect to use one of these access points, or Remove to delete it from printer. Currently Configured Networks – access points added through Add/Edit. They may not have been connected yet. Select Remove to delete access point from printer. Set Date – Some Enterprise network connections require this setting. Simply enter the current year. Add/Edit Network Enter the SSID of a network connection. If authentication is used select the authentication type. Click Next. The following form will change depending on the authentication type: WPA-PSK Enter the password for the network connection. WPA-EAP or IEEE8021X 10 www.dascom.com These are Enterprise network settings. Consult your server manual for recommended settings. Upload Digital Certificate If your enterprise network uses digital certificates as another form of authentication, you can upload the certificates here. B. Image Parameters This page allows you to make selections about the image to be printed. Current Emulation: Possible Values: ZPL, CPCL, ESCPOS, IPL, AUTOIMAGE, PDF, POSTSCRIPT, IMAGE 11 www.dascom.com The DP-541 printer is capable of using several different emulation modes. This feature sets the family of printer commands that may be used by a host application program to control the various capabilities of the printer. The printer will only respond to commands valid for the currently selected emulation. For more information, please refer to the Integrator’s Guide. Besides the popular printer languages to choose from, the following selections allow the DP-541 to print many other file formats directly, without the need for a driver. AUTOIMAGE – selected when mixed PDF and POSTSCRIPT images are sent to the printer. The printer will determine which type of file has been sent. This can increase printer response time. PDF – When in this mode the printer will directly print Portable Document Files (PDF). POSTSCRIPT – When in this mode the printer will directly print Postscript formatted files (.ps). You can also use a generic Postscript driver to print when in this mode. IMAGE – selected if just image files are being sent to the printer. When in this mode the printer will directly print the following file types: .png, .jpg, .bmp, .pbm, .svg, .tiff Default Font: The DP-541 has the ability to use True Type Fonts. All True Type Fonts loaded into printer memory are listed here. When using emulations that do not specify the font for each line of text, select the font you would like to use as the default font. All print jobs will use the default font unless a command is sent to the printer to use another font. Chars Per Inch and Default Text Line Spacing: This determines how large the characters are and how many characters will print in a one inch space. The higher the number, the greater the number of lines per vertical inch of print. C. Device Config This page allows you to set certain hardware parameters on the printer. 12 www.dascom.com Login Password This allows the printer webpage password to be changed. Units Select between inches or millimeters. If you change units, do so before entering other settings. Max Paper Speed Possible values: 1.0 to 5.0 ips, Default = 5.0 When using labels or heavy paper stock, you may need to decrease the paper speed to prevent paper jams. Mark Seeking Possible values: Off*, Front, Rear, Gap. (Note: Rear and Gap are available only on 541L models). Set the value when using regular or label media with black alignment marks or label media with gaps between the labels Sensor Brightness Possible values 0-100%. This displays the reflectivity or light transmission of the media, depending on the setting for Mark Seeking. This value is updated once per second. Note: Before adjusting black mark thresholds, set Mark Width to match the width of the black mark or label gap on your media. Front Paper Sensor Threshold 13 www.dascom.com When using paper with a black on the front adjust this setting to insure the paper stops at the black mark. 1. With the lid closed and the black mark not over the front paper sensor, note the Sensor Brightness. 2. Open the paper lid and hold the paper against the front paper sensor so that the black mark is over the sensor. Note the Sensor Brightness. 3. Set Threshold = black mark brightness + ((paper brightness – black mark brightness) / 2) and click Submit Changes. Example: black mark brightness = 10%, paper brightness = 80%. Threshold = 10% + ((80% - 10%) / 2) = 45%. 4. Close lid and press paper feed. The paper should stop with the bottom of the form at the tearbar. Rear Paper Sensor Threshold This is set the same as the front paper threshold, but using the rear (in lid) paper sensor and the Rear Sensor Brightness. Gap Paper Sensor Threshold When using labels without a Black Mark, adjust this setting to insure the label stops at the gap in between labels. 1. Remove 2 labels from the backing paper, and close the lid so the backing is over the paper sensor. Note Sensor Brightness for Gap. 2. Open the lid and close it so a label is over the paper sensor. Note Sensor Brightness for Gap. 3. Set Gap Threshold = label brightness + ((backing brightness – label brightness) / 2) and click Submit Changes. 4. Close lid and press paper feed. The paper should stop with the bottom of the form at the tearbar. Backup Distance Before Printing Used with Mark Seek. User defined. This is the distance the printer will pull in the paper before starting to print. Max Mark Search Distance Used with Mark Seek. User defined. This is the distance the printer will advance paper to seek the mark before displaying a Paper Out condition. Stop Distance after Mark Use with Mark Seeking. User defined. This is the distance the printer will advance the paper after the mark is detected. Left Margin Setting this value will tell the printer how far from the left edge of the paper to start the print job. Contrast Possible values 0 – 10. Default value is 5 The lower the value the lighter the print. The higher the value the darker the print. Paper Energy Values This is a locked value. These settings are supplied by the paper manufacturer. The default settings cover most grades of paper. If you are using non-standard paper consult the paper manufacturer for recommended settings. Auto Off Timer Possible values 0 – 1440 minutes. Default value is 60. This timer will turn the printer off if it has not been used for the time set. Disable this feature by setting the time at 0. The printer will give a 1 minute warning before shutting off. D. Fonts 14 www.dascom.com Upload Font File Truetype Fonts (.ttf, .otf, .ttc and .bdf) can be uploaded here. Languages like ZPL and CPCL can use the fonts by referring to them by their Font Family Name. Font Aliases Languages like ZPL and CPCL can use an uploaded Font Alias Table so legacy jobs can have their font names mapped to other uploaded fonts. Contact Dascom retailer for more information. E. Graphics This menu will allow you to load a graphics file into printer memory for use in creating your output. For instance, logos can be stored for recall and use by your host program (see Integrator’s Guide for more details). 15 www.dascom.com Upload File Select the graphics file to load into printer memory. Acceptable graphics formats are .jpeg, .pbm, .pcx, .bmp, .png and .svg. Set Width Select the width you want to use to display your logo: full width, half width, or quarter width. Set index Depending on the Index value used, you can automatically print the graphics file as a header (prints at the beginning of the print job), footer (prints at the end of a print job) or use the graphics print command to print anywhere on your receipt or label. See Integrator’s Guide for more information on graphics commands. When selecting header, the graphics file will automatically print the logo at the beginning of each print job. When selecting footer, the graphics file will automatically print the logo at the end of each print job. You must set each of these values before selecting Upload Logo or the default values will be associated with your image. Current Logo Mapping Once uploaded into the printer memory, your image and settings will be displayed here. F. Update Printer Firmware, Upload Files to Printer Memory 16 www.dascom.com Printer Application Updates, OEM information and Manuals and more can be uploaded here. Contact Dascom retailer for more information. G. Reset Printer Configuration to Factory Defaults (Safe Mode) Printer settings can be restored to factory configurations. Note that WIFI network configurations will be lost when Network Config to Factory Defaults is checked. 17 www.dascom.com Printing Modes There are two fundamental printing modes with mobile printers. A. ASCII Based Print Jobs The host sends the print job as a series of lines of characters, some of which represent the text to be printed, while other portions are command codes which tell the printer which font to use, where to locate the text, what barcodes to use, etc. These text-based files are encoded in a print language specific to the target printer. The DP-541 understands ASCII based jobs in several different print languages. Refer to the Appendix or the Integrator’s Guide for the list of print languages supported. B. Graphic Based Print Jobs The host assembles the printed image as a series of lines of dots, and transmits this image as a sequence of data bytes that represent the dot patterns assembled. Often these jobs or files have some control characters on the front end and / or rear end of the dot pattern bytes to define their format, help control pagination, etc. Windows drivers in particular encode the image as a graphic based print job before it is passed along to the printer. In addition to accepting graphic jobs from its Windows driver, the DP-541 can accept and print directly many other graphic image file types. This opens up the option to print job images from a variety of devices for which drivers or print utilities don’t exist, such as some tablets and smartphones. Please see the Integrator’s Guide or your system integrator for more details. 18 www.dascom.com Integrating the Printer into your Business Applications Step by Step – Creating a Link from Host to Printer A. Windows Desktop Computers Print Drivers You may download the appropriate Windows driver from our website. Install the printer driver by the standard method for your version of Windows. I. USB a) Install the printer driver onto your hostbefore connecting the printer. Follow prompts displayed during installation. b) Plug the printer into a USB port on your host system using a mini-USB cable. c) The printer will appear in the “Unspecified” devices section. Right click on the icon. d) In the popup window, select the Hardware tab. Note the USB port number displayed. e) Using the “Add Printer” wizard, install the printer using the driver file obtained from Dascom and the USB port number noted above. f) After the printer driver installs, the printer will appear as “Dascom 4-inch printer” under the “Printers and Faxes” heading of your Windows “Devices and Printers” screen. II. Wi-Fi Note: The following instructions are fundamentally the same for an Infrastructure or Wi-Fi Direct (peer to peer) setup. They also assume that you have already configured your Wi-Fi interface via the DP541 printer web page (see the section on Configuration). a) Perform a configuration printout to verify the printer Wi-Fi setup and to record the IP address assigned and the Port number. b) Install the printer as a local printer using the USB instructions above. c) In the “Devices and Printers” screen, right click the printer icon representing your mobile printer. d) Under Printer Properties, select the Ports tab, then select “Add a Port” e) In the new dialog box which appears, select “Standard TCP/IP ports”; this will open the Standard TCP/IP Printer Port wizard. f) Follow the on-screen prompts in this wizard. You’ll use the IP address recorded above to set up the port. In the same screen you can also name the port something familiar and relevant, and this will appear as the name of the printer to the user. g) After the port is detected, it will be displayed as a “generic network card” – accept this by clicking Next / Finish. h) After you are finished adding the port, Windows will report it as a “Standard TCP/IP port”; click OK to accept this. i) Close the Printer Port window. j) Now in the Printer Properties dialog box your IP address (or the familiar name you assigned above) will appear in the list of ports available. Select it to configure the port. 19 www.dascom.com k) Windows defaults standard TCP/IP ports to port number 9100. The DP-541 Wi-Fi port number is internally set to 8023. Change the port number to 8023 in the Windows screen and click OK. l) Click “Apply” in the Printer Properties box. m) Your DP-541 printer driver should now be properly coupled to the Wi-Fi parameters you have chosen. B. Windows Tablets and Smartphones This feature and/or specific directions for use were not available as of this printing. C. Android Tablets & Smart phones I. Wi- Fi This feature and/or specific directions for use were not available as of this printing. D. Apple™ Tablets & Smartphones I. Wi-Fi This feature and/or specific directions for use were not available as of this printing. 20 www.dascom.com Media A. Standard Media Dascom offers a variety of media types. See Appendix C for detailed descriptions and ordering information. You may also visit our website or contact your Dascom Mobile sales representative for a complete and up to date description of our consumables and accessory products. B. Black Mark Media Position For automatic ticket printing, the Black Mark should be positioned as shown in the figure below. When using Mark Sensing mode (see Configuration, earlier in this document), FieldPro printers will automatically position the output for tear-off and printing following a Form Feed command or by pressing the Paper Feed button. For non-automatic paper positioning, refer to the Integrator’s Guide for sensing and positioning commands. 21 www.dascom.com Maintenance and Troubleshooting A. Cleaning In normal environments, the printer should be cleaned after printing a few rolls of paper or if there are voids in the printout. For optimum performance and life, you should clean the Print Head and Platen Roller whenever you load new paper. To clean the printer areas as described below, use a Thermal Head Cleaning Pen and MCR Cleaning Card available from Dascom, or you may use cotton swabs moistened with isopropyl alcohol. Turn the printer off. Open the Paper Door and remove the paper. Using a Thermal Head Cleaning Pen, clean the white ceramic surface on the Print Head. Caution: Do not use sharp objects to clean the print head. This may damage the printer and require service. Such damage is not covered under warranty. Clean the Black Mark Sensor below the print head. Clean the Tear Bar. Clean the Platen Roller. Turn the Platen Roller with your finger to clean the entire surface. If a Magnetic Card Reader is installed, pass and MCR Cleaning Card through the MCR slot to clean the head. You may also experience a buildup of paper dust in the printer. This may be removed using a can of compressed air or by vacuuming. To clean the exterior of the printer, turn the printer off and use a soft cloth moistened with a mild detergent. B. Battery Care I. Getting the Maximum Battery Life New batteries are shipped in an “uncharged” state and must be charged for at least 4 hours prior to the first use. Maximum battery capacity is not reached until after completing a minimum of three complete charge and discharge cycles. II. Charging the Battery 22 Plug the power adapter into a power source appropriate for the adapter being used. Plug the power adapter into the power connector on the side of the printer. The printer’s battery charging circuitry will analyze the condition of the battery and begin charging it if necessary. If the battery is not fully charged, charging will begin and the Battery Indicator will illuminate. When the battery is fully charged, the Battery Indicator will turn off. Charging may take up to 8 hours (4 hours with external desktop charger accessory) depending on the condition of the battery. The printer may be used while the battery is charging, but this will extend the time required to fully charge the battery. www.dascom.com e power ada apter may remain conn nected to th he printer to o keep the b battery fully charged an nd The willl not cause damage to the printer or battery. III. Addittional Batttery and Safety Info ormation The e DP-541se eries printerrs use an 11 1.25 volt 29 950 mAH Litthium Ion battery. Cautio on: Risk of explosion if battery is i replaced d by incorre ect type. D Dispose of used batteriies according to the instruction ns. IV. The e recommended ambie ent tempera ature for cha arging is 68 8-77° Fahrenheit (20-25 5° Centigra ade). Takke the batte ery out of the printer wh hen storing the printer for long perriods of time e. The batttery sto orage tempe erature is 40 0-104° Fahrrenheit (4-4 40° Centigra ade). Do no ot store a fu ully charged batttery at temperatures above this ra ange for lon ng periods of o time or th he battery may perrmanently lo ose charge capacity. Do not disasse emble, shorrt circuit, he eat above 80 0°C, or incinerate the b battery. The e battery ma ay plode. exp Only dispose of o used battteries accorrding to you ur local regu ulations. If yyou local re egulations, the t Recharg geable Batte ery Recyclin ng do not know your Corporation (R RBRC) is a non-profit organization n created to o promote reccycling of re echargeable e batteries. For more in nformation visit ww ww.rbrc.org. Testting the Power Adapter and Battery To verify th hat the printter’s interna al battery ch harger is fun nctioning prroperly, perf rform the folllowing step ps. Tesst the powe er adapter (1 100-240VAC/50-60Hz,, 12/24VDC C adapter) with w a voltme eter to veriffy tha at its output voltage is 19 1 VDC. Connect the power adaptter to a pow wer source and a then co onnect it to tthe printer. Verify that the printer’s Ba attery Indica ator is illum minated. If illuminated, the chargin ng circuit is fun nctioning pro operly. Note: If the t battery is already fu ully charged d, the Batte ery Indicatorr may not illuminate. Afte er the batte ery has been n charged for f five minu utes, discon nnect the po ower adapte er. Perform a prin nter Self-Tesst. o Make ssure the printer is turne ed off. o Press and a hold the Paper Fe eed Button while turning g the printer on. he printer successfully prints the Self-Test, th he battery iss functional. If the Selff-Test does If th nott complete and a the prin nter turns offf, repeat this test with a known go ood battery.. Once this test has comple eted successsfully, allow w the batterry to fully ch harge. At th he end of th his time the Battery Indicatorr will turn off ff. If the printe er and batte ery do not appear to su uccessfully pass these tests, referr to the Trou ubleshooting section forr possible ca auses and solutions. Note: Thiis test only verifies thatt the powerr adapter, th he internal charging circuit, and the battery arre functioning g properly. This test do oes not provvide a valid d indication of the relative capacity y of the battery or how long it may ho old a charge e. 23 www w.dascom.co om C. Troubleshooting When encountering problems, the cause may be the printer or may sometimes be due to other problems with your system. Please review the following tables to solve common problems you may encounter with your printer. You may also visit www.dascom.com for additional “FAQ’s” that may assist you. If you are still unable to solve your problem, please contact the company from whom you purchased your printer since they are most familiar with your systems. I. General Error Conditions Whenever the printer detects an error condition the Alert (red) Indicator will either flash or stay on. In some cases the audible alarm will also sound. Please refer to the following table for a list of what causes these conditions and how they may be corrected. Error Indicator Flashes Possible Cause Paper Out or Paper Door not fully closed Stays On, With Alarm Print job too large for printer memory II. Fault Description and Resolution Problem Printer will not turn on. Possible Cause Battery not installed properly Printer turns itself off. Discharged battery Battery discharged Electrostatic discharge Battery Indicator does not light or does not stay lit when power adapter is connected. Battery already fully charged Power supply not receiving power Faulty power adapter Battery not charging. Faulty power adapter or battery Low battery Poor print quality. 24 Solution Make sure the door is fully closed by opening the door and closing it again until the door “clicks” closed. Check the platen roller for damage. Divide long documents into individual pages. Printer power must be cycled to clear error. www.dascom.com Solution Remove and reinstall battery making sure the battery is seated with door closed. Recharge battery. Replace or recharge battery. May occur in extreme low humidity conditions. Turn printer back on with power button. No action required. Check building/vehicle circuit breakers/fuses. Check output of power adapter with voltmeter. Should be 19 VDC. Try new power adapter, or replace battery. Check and recharge battery. Problem Possible Cause Print head dirty Poor quality or “old” paper Paper not feeding. Obstruction in paper path, or paper improperly installed Poor quality paper Paper does not advance to black mark reliably. Paper Door not fully closed Dirty Black Mark/Paper Sensor Black Mark density/contrast Paper not feeding reliably or print is compressed vertically Print Garbled. Printer will not print. Poor quality paper Heavy or thick forms; specialty paper with slick finish Paper Door not fully closed Low Battery Improper Interface configuration Paper Door not fully closed Low Battery Paper not loaded correctly Improper Interface configuration Solution Clean print head. Refer to “Maintenance” section of this document. Verify paper from approved source. Try new roll of paper. Check paper path and reinstall paper (see “Quick Start Instructions”). Verify paper from approved source. Verify door is closed. Clean Sensor as described in “Maintenance” section of this document. Adjust Mark Sensitivity as described in Device Settings Menu . Verify paper from approved source. Lower the Max Paper Speed as described in Device Config Menu . Verify door is closed. Check and recharge battery. Verify printer and host settings match. Verify door is closed. Check and recharge battery. Check paper path and reinstall paper (see “Quick Start Instructions”). Verify printer and host settings match. Print a selftest to verify printer settings and to verify printer is functioning properly. D. Obtaining Service If service is required for your printer, please contact the company where you purchased your printer. If they are unable to assist you, contact Dascom retailer to obtain a Return Authorization Number. Printers without Return Authorization will not be accepted. 25 www.dascom.com APPENDIX A. Appendix A – DP-541Printer Specifications Printing Specifications Printing Method: Direct thermal. Printing Resolution: 203 dpi (8 dots per mm). Printing Speed: Up to 5 ips. Printing Width: Up to 4.1 inches (104 mm). Fonts/Characters/Bar Codes Fonts: Virtually all TrueType fonts, from 6 cpi to 34 cpi depending on emulation chosen, plus scaling. International Characters: All common sets available via UTF-8 encoding. Unicode support. Bar Codes: Virtually all 1D and 2D codes supported, depending on emulation chosen. Downloadable firmware, fonts, graphics, and logos. Connectivity Standard (All Units): USB 2.0 PNP. USB-C input connector. Wireless Options: Wi-Fi 802.11b/g/n compatible Software Drivers and Utilities: Drivers for XP, WIN 7, WIN 8, WIN 10. Compatible with Windows CE/Pocket PC, Windows Mobile, Apple iOS, Android. Print utilities and SDK’s for all platforms. Native App and Web printing. Printer Setup via internal web page, access with browser from any host (tablets and smartphones included). Emulations: Emulates many popular printer brands and languages including: Zebra CPCL and ZPL, Extech, IPL, and ESC POS. Firmware can be upgraded as new emulations become available. Supports direct printing of Postscript, PDF, PBM, JPG, PNG, BMP, SVG, & TIFF files. Print Media Paper Type: Direct Thermal Roll. Roll Size: Maximum roll diameter 2.625” (66.7 mm), roll widths up to 4.125” (80 mm). Roll Capacity Label Media: Approx. 75’ (23 m), creating 148 6” long labels. Receipt Media: Approx. 173’ (52.6 m), creating 346 6” long receipts. Core Size: 0.75” Recommended (19 mm). 3 LED indicators for general fault, power and battery status indication. Buttons for power and paper feed. Sensors for paper out, black mark detection, and door open. “Gas gauge” on battery door. Memory Capacity 256 MB Flash, 512 MB DDR2. Standard memory supports large and graphic intensive print jobs. Durability and Reliability Survives multiple 6 foot drops to concrete (each face) per IEC 68-2. MTBF: 10,000 hours in normal use. Regulatory Approvals FCC Class B, CE mark, RoHS, UL listed AC adapters, e-mark. Power Management Warranty Battery: Rechargeable 3 cell Lithium Ion, (11.3 V, 2950 mAh, 33.2 Wh). 2-year printer warranty on the entire printer—case and print head included. 1-year warranty on the battery. Endurance: Over 3,500 printed inches per charge. Power Option: 100-240 VAC wall adapter, or 12-24 VDC in-vehicle adapter. When plugged in, the printer can be used while recharging the battery or can be run without the battery (print & charge adapter). Physical Specifications L x W x H: 6.1” x 5.7” x 2.7” (15.5 x 14.5 x 6.9 cm). Weight: 24 ounces (.68 kg) with battery. Environmental Specifications Operating Temp: 0° to 113°F (-18° to 45°C). Storage Temp: -4° to 140°F (-20° to 60°C). Humidity: 10% to 90% RH (noncondensing). Rated IP54 per IEC 529 26 Operator Controls and Indicators www.dascom.com Options and Accessories AC Wall Adapter, 100 to 240 VAC Print and charge version Charge only version In-Vehicle Power Adapter, 12 to 24 VDC Shoulder Strap Data Cables; USB Spare Batteries in Multi-Packs Media in Case Quantities Popular Mounting Systems In-Vehicle Systems Cart Mounting Systems Fixed Mounting Systems B. Appendix B – Supplies and Accessories Part # ACCESSORIES 93181 93180 xxxxx 91868 93176 93177 93194 AC Charge & Print Adapter - North America, 100-240VAC 50/60Hz AC Charging Adapter - North America, 100-240VAC 50/60Hz USB Cable, A to C, 6 Ft. Shoulder Carrying Strap DP-541 Battery Charger 1 bay DP-541 Battery Charger 2 bay Spacer for 3" paper DP-541 Part # SUPPLIES 93104 93124 93106 91393 DP-541 Battery (3 cell Li-ION; 33WH) DP-541 Battery, 5-Pack DP-541 Battery, 20-Pack Thermal Printhead Cleaning Pen (12/box) C. Appendix C – Media Part # Grade Type xxxxx 93110 STANDARD STANDARD Receipt Paper, 4.125" W (94 Linear feet per roll) Receipt Paper, 3.125" W (94 Linear feet per roll) 36 ROLLS 36 ROLLS Qty xxxxx 93111 PREMIUM PREMIUM Premium Receipt Paper, 4.125" W (70 Linear ft per roll) Premium Receipt Paper, 3.125" W (70 Linear ft per roll) 36 ROLLS 36 ROLLS D. Appendix D – Mounting Options Part # PRECONFIGURED KITS xxxxx xxxxx xxxxx xxxxx xxxxx xxxxx DP-541Round Base Mount with Bracket DP-541Magnetic Base Mount with Bracket DP-541Suction Base Mount with Bracket DP-541U-Bolt Mount with Bracket DP-541Round Base Mount with Long Arm Bracket DP-541Mounting Pole with Bracket Part # PRINTER ATTACHMENTS xxxxx xxxxx DP-541Direct Mount Plate * DP-541Printer Plate With Ball *For direct mounting. Not compatible with connecting arms or bases. Please contact your Dascom sales representative for price and availability. 27 www.dascom.com Glossary of Terms 802.11 Wireless networking communication standards created by IEEE. Ad-Hoc A Wi-Fi network consisting of only stations (no access point). Same as Peer-toPeer. authentication The process a Wi-Fi station uses to identify itself to another station. baud rate The rate at which characters are transmitted over a serial interface. This is also often referred to as bits per second. client Any node on a network that requests services from another node (server). character pitch The horizontal spacing of characters. Measured in cpi. cpi Characters per inch. default Value or configuration assumed when the printer is powered on or reset. DHCP Dynamic Host Configuration Protocol. A method used to centrally control the assignment of IP addresses on a network. dpi Dots per inch. Generally used to refer to graphics density or resolution. font A group of characters of a given shape or style. infrastructure A Wi-Fi network consisting of stations connecting to a wired network or other stations via an access point. interface The connection between the printer and the host computer. IP Internet Protocol. A specification for packets, or datagrams, of data and an addressing method to allow the exchange of data with another system. Must be combined with another protocol such as TCP to create a complete connection with the other system. LAN Local Area Network. LED Light emitting diode. lpi Lines per inch. margin An area along any edge of a form where data may not be printed. Peer-to-Peer A network consisting of only stations (no access point or central server). Same as Ad-Hoc. reset Initialization of various operating features of the printer to the value or state assumed when the printer is powered on. 28 www.dascom.com server Any node on a network that provides services to another node (client). SSID Service Set Identifier. An identifier attached to packets on a Wi-Fi network that identify the particular network the packets are intended for. TCP Transmission Control Protocol. A specification that controls the connection between systems on a network. top of form The vertical position where the first line is printed on the paper. Also the position the paper is advanced to when a form feed (FF) character is received from the host or the Form Feed button is pressed on the printer's control panel. USB Universal Serial Bus. WAN Wide Area Network. Refers to connections that allow one LAN to communicate with another LAN(s). WEP Wired Equivalent Privacy. A security protocol for wireless LANs designed to provide data security similar to a wired LAN. Wi-Fi Refers to any of the IEEE 802.11 standards. WLAN Wireless Local Area Network. A LAN made up of wireless nodes. 29 www.dascom.com Index 802.11, 30 Add Enterprise Network, 11 Add Personal Network, 11 Address Method, 10 Ad-Hoc, 30 Alert, 6 Android, 3, 20 Android Tablets & Smart phones, 20 Apple, 3, 21 authentication, 30 Auto Off Timer, 15 AUTOIMAGE, 12 Available Networks, 11 Backup Distance Before Printing, 14 battery, 3, 5, 7, 23, 24, 25, 26 Battery Care, 23 Battery Disposal, ii Battery Installation, 5 baud rate, 30 Canadian Department of Communications Radio Interference Statement, i character pitch, 30 Charge Battery, 5 Charging the Battery, 23 Cleaning, 23, 29 client, 30 Com Port, 19 Configuration, 7, 22, 30 Connectivity Parameters, 8 Contrast, 14 Control Panel, 6 CPCL, ii, 12 cpi, 30 Current Emulation, 12 Current Logo Mapping, 16 Current Printer Config, 10 default, 30 Default Font, 12 Default Text Line Spacing, 13 Device Config, 13 DHCP, 30 discover name, 19, 21 Discoverablity, 9 dpi, 30 driver, 19 Drivers, 19 30 ESCPOS, 12 Fault Description and Resolution, 25 FCC Part 15 Class B, i features, 31 Font Aliases, 15 Fonts, 15 form, 31 Front Paper Sensor Threshold, 14 Gap Paper Sensor Threshold, 14 GateWay, 10 General Error Conditions, 25 Graphics, 16 IMAGE, 12 Image Parameters, 12 infrastructure, 30 interface, 30 IP Address, 10 IP54, 3 IPL, 12 LAN, 30 LED, 30 Left Margin, 14 lpi, 30 Maintenance, 2, 23, 26 margin, 30 Mark Seeking, 14 Max Mark Search Distance, 14 Max Paper Speed, 13, 26 Maximum Battery Life, 23 Media, 2, 22, 27, 28, 29 Mounting Options, 29 Obtaining Service, 26 Paired Mode, 8 pairing code, 19 Paper Energy Values, 14 Paper Feed Button, 6 Paper Load, 4 passkey, 19, 21 PDF, 12 Peer-to-Peer, 30 PIN, 8, 9 POSTSCRIPT, 12 power, i, ii Power Button, 6 Power On, 5 Quick Start Instructions, 4 www.dascom.com Rear Paper Sensor Threshold, 14 reset, 31 Role Policy, 9 Safety Information, 24 Self-Test, 6, 24 server, 31 Set Date, 11 Set index, 16 Set Width, 16 Specifications, 2, 3, 27, 28 SSID, 31 Stop Distance after Mark, 14 SubNetMask, 10 Supplies and Accessories, 2, 29 TCP, 31 Testing the Power Adapter and Battery, 24 Troubleshooting, 2, 23, 24, 25 Units, 13 Upload Digital Certificate, 12 Upload File, 16 Upload Font File, 15 USB, 19, 31 USB port, 2, 19 WAN, 31 web page, 7 WEP, 31 Wi-Fi, ii, 2, 20, 30, 31 WI-FI Config, 8, 9 Wifi Port, 10 Windows, ii, 3, 18, 19, 20 WLAN, 31 ZPL, 12 DASCOM REPRESENTATIVES GERMANY DASCOM Europe GmbH Heuweg3 D-89079Ulm Deutschland Tel.:+49(0)731 2075 0 Fax:+49(0)731 2075 100 www.dascom.com UNITED KINGDOM DASCOM GB Ltd Hart House, Priestley Road, Basingstoke,Hampshire RG24 9PU,England Phone:+44(0)1256 355130 Fax:+44(0)1256 481400 www.dascom.com SINGAPORE (ASIA PACIFIC) DASCOM AP Pte Ltd 2 Jurong East Street 21 #05-42, IMM Building Singapore 609601 Phone:+656760 8833 Fax:+656760 1066 www.dascom.com AMERICAS DASCOM Americas Corporation 34 Lakeview Court Verona, VA 24482 USA Phone: +1(877)434 1377 Fax:+1 (540) 242 7221 www.dascom.com FRANCE DASCOM Europe GmbH 117AvenueVictorHugo 92100 Boulogne-Billancourt France Phone:+33(1)73 02 51 98 www.dascom.com CHINA JIANGMEN DASCOM COMPUTER PERIPHERALS CO., LTD No.399, Jinxing Road, Jianghai District, Jiangmen, P.R. China www.dascom.com “Allrights reserved.Translations,reprintingorcopyingbyanymeansofthismanualcompleteorinpart orin anydifferentformrequiresourexplicitapproval.Wereservetherighttomakechangestothismanual withoutnotice.Allcarehasbeentakentoensureaccuracyofinformationcontainedinthismanual.However, wecannotacceptresponsibilityforanyerrorsordamagesresultingfromerrorsorinaccuraciesofinformation herein.” ©2017DASCOM and Troubleshooting
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2017:12:20 17:14:09+08:00 Modify Date : 2017:12:20 17:14:09+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Microsoft Word - user munual Creator : Administrator Creator Tool : PScript5.dll Version 5.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:14ac8d46-2275-495c-b7a2-04f997c3362a Instance ID : uuid:7481b244-8855-4f36-81e5-3ee94f49ec76 Page Count : 36EXIF Metadata provided by EXIF.tools