Jiangmen Pengcheng Helmets DWO-3 Bluetooth Helmet Headset User Manual NewBlueToothIntroduction
Jiangmen Pengcheng Helmets Ltd. Bluetooth Helmet Headset NewBlueToothIntroduction
Contents
- 1. Manual
- 2. Helmet Installation Instructions
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1862534 |
| Application ID | fH+t4wFGSdS0rNADKCSnxQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 100.03kB (1250386 bits) |
| Date Submitted | 2012-12-18 00:00:00 |
| Date Available | 2012-12-19 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | NewBlueToothIntroduction_å¤åˆ¶ |
| Document Creator | Adobe Illustrator CS6 (Windows) |
Bluetooth Helmet Headset DWO-3 Bluetooth Helmet Headset Bluetooth Helmet Headset - Bluetooth helmet headset for mobile phone communication. - Bike to bike intercom communication with another unit (up to 1.640 ft. / 500 meters range). - Turn by turn GPS navigation instructions (with compatible Bluetooth device). VO >Power on / off >Paring >Start the intercom call >End the intercom call 1. Not working The battery could be flat. Charge the headset for 3 hours and try again. Note: When the Bluetooth helmet headset has no connection to the mobile phone ot other Bluetooth devices, time more than 60 minutes later, the Bluetooth helmet headset will automatically be turned off. 2. No sound VO Physically check whether the speakers and microphone have been correctly connected. Check if you have turned the volume down too low. DWO 3 JZWO-3 The BiLT™ Bluetooth helmet headset offers the following uses: >Answer call >Reject call >Last number redial >Voice dial >Volume up & down >Play / Pause >Music Forward / Backward TROUBLESHOOTING button 1 button 2 L: Congratulations and thank you for having chosen the BiLT™ Bluetooth helmet headset for motorcycle riders. This manual will help operate the headset, but you should first familiarise yourself with the Bluetooth functions of your mobile phone or GPS device before using. CONTENTS OF RETAIL BOX FCC ID MODE : A INTRODUCTION Bluetooth Helmet Headset Charger and USB charger cable Right speaker Left speaker - MP3 connectivity (Bluetooth compatible version). COMPATIBILITY WITH YOUR HELMET 3. Whistling of the speakers. 7. Reset Some regions of high RF strength or near high power TV transmitters, GSM station or airport raders, can overwhelm the headset and stall the unit. Please charge the unit, and it will be reset and work normally again. 8. Unsolved problem If the microphone is too close to a speaker, the speaker will make a whistling sound. Increase the distance between the microphone and the speaker. Please return the headset back to after-sale service department if you can not resolve the problem with the help of steps 1-6. 4. Loss of connection with the mobile phone or music sources FCC Statement Please check whether the battery is too low or the use rang to your mobile phone is out of 10 meters or blocked by some obstacles like metel or water etc. that absorb much radio signals. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: > Reorient or relocate the receiving antenna. > Increase the separation between the equipment and receiver. > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio / TV technician for help. 5. Cannot connect with mobile phone The BiLT™ Bluetooth helmet headset is easy to install inside the helmet. When buying your headset or your helmet, please ask your dealer for compatibility of both. 6. Can not reconnect or connect with your mobile phone automatically Clear all pairing information of the Bluetooth helmet headset as user manual instructed, then please delete all Bluetooth devices on your mobile phone then turn off, take out your mobile phone battery for a few seconds, and then put back the battery, turn on your mobile phone, restart the Bluetooth function and search and pair the bluetooth device again, after device paired successful, make sure you set the option of helmet headset to be “Default/Trusted/Authenticated/Auto Connect Enable/Always Visible/Discoverable” device. Now you can reconnect with your Bluetooth helmet headset. Test connection with you mobile phone before purchasing. We cannot guarantee that the BiLT™ Bluetooth helmet headset can connect with all types of mobiles as some mobile phone may not use the standard Bluetooth profile. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: The use of two speakers may be illegal in certain countries. Please check the local regulations and act accordingly. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interfernce received, including interference that may cause undesired operation. Bluetooth Helmet Headset INSTALLATION OPERATION VOL+ AJZDWO-3 D: L: DWO-3 VOL- MO FCC 1 Headset control box mounting plate The headset mount plate must be mounted onto the helmet first. Once mounted, the headset unit can be attached or detached from the sliding plate at any time you want. The unit is designed to be mounted on the left side of the helmet. Note: it is better to remove it from the mounting plate when not in use. 2 Mounting the microphone and speakers - Ensure your helmet has enough room to mount the speakers (ie; cutout). - Certain models of BiLT™ helmets are equiped with the specific cut-outs for this model, DWO-3. At time of printing (Jan 2012) BiLT™ compatible model include; Dominator, Tour Tech, Tour Tech TSS, GP3&CFK-1. For fitment to any other motorcycle helmet please consult your local dealer for expert advice. - Fit the velcro tabs into the cut-out on the above BiLT™ helmet, or where applicable on other helmets then attach the speaker to the velcro tab (note: short speaker cord for left, long speaker cord for right). - Ensure the microphone is positioned in close proximatior to the mouth. On above BiLT™ helmets the microphone can be routed behind the removable cheek pads. Always prioritise your riding, not mobile phone calls. During a mobile phone conversaton, or while using the intercom, decelerateand concentrate on your riding. In bad weather and/or heavy traffic we recommend pulling over and stopping before answering. Feed cords under the helmet liner if possible and as close to the bottom of the helmet Right speaker Microphone Cable & Jack Bluetooth Helmet Headset Left speaker POWER ON & OFF 1 In power off state, press and hold Button 1 for about 3 seconds until a short “di” tone played and the Blue LED indicator flashes, the headset is powered on. 2 In power on state, press and hold Button 1 for about 8 seconds until a short “di” tone played and Blue LED indicator shut off, the headset is powered off. ENTER PAIRING MODE In power off state, press and hold Button 1 for about 8 seconds until a “didi” tone played and the Blue and Red blue LED indicators flash alternately, the headsets are on pairing mode (the Bluetooth headset can be searched and paired only when it is on pairing mode). MOBILE PHONE OPERATION 1. PAIRING WITH MOBILE PHONE (1) Place the mobile phone and the Bluetooth helmet headset together within 1 meter. (2) Make sure the Bluetooth helmet headset is powered off. (3) Press and hold the Button 1 of the Bluetooth helmet headset about 8 seconds until heard a “dudu” tone played and the Blue and Red LED indicator flashes alternately, and then release the button. (4) Initiate Bluetooth function of the mobile phone and search the Bluetooth helmet headset according to mobile phone user manual. (5) Choose the Bluetooth device with the name “DWO-3”, then press ok button to pair with it, enter pairing password <0000>, then the indicator turns into regular Blue light flash, after that you will hear a “di” tone to indicate success pairing. Then you can transmit voice frequency through the Bluetooth helmet headset and use the button of that to control music playing of the mobile phone. OPERATION Note: 1. Some mobile phones don't need to input pairing password, because it can automatically complete the pairing process. 2. If the phone and the Bluetooth helmet headset has been paired ,and the phone is on the state of connection, after that every time turning on the headset ,it will automatically connect the mobile phone. If they are not connected and the Bluetooth headset is idle state (blue LED short flashing every 3 seconds), a short press the button 2, the headset will initiate a connection to the headset. 2. AUTOMATICALLY ANSWER INCOMING CALL The Bluetooth helmet headset has the automatically answer function, after 2 incoming call ring tones played (about 10 seconds), and if there is not any operations on the headset, the Blutooth helmet headset will answer the phone call automatically. 3. ANSWERING INCOMING CALLS Press button 2 to answer when there is an incoming call or you can answer it with your mobile phone normally. 4. REJECTING INCOMING CALLS Double press button 2 to reject an incoming call. 5. Hand Up In call active state, a short press button 2 can hang up the call. 6. LAST NUMBER REDIAL (1) Left twist twice button 2 can redial last called out number when connected with mobile phone. (2) When playing music through bluetooth, if you want to redial last called out number , first you must stop playing music and then left twist twice button 2. 7. Voice Dial While the Bluetooth helmet intercom headset is connected with the mobile phone, right twist twice button 2, then the mobile will prompt you to speak out your desired name. When playing music through bluetooth, if you want to do that, first you must stop playing music and then right twist twice button 2 to come to voice dial. 8. VOLUME CONTROL In phone or intercom call active and music-playing state, left twist and hold button 2 can go to turn down the volume, right twist and hold button 2 can go to turn up the volume, when reaching the maximum or minimum volume, a "DiDong" tong will be played. INTERCOM OPERATION 1. Pairing Intercom Headsets 1.1 Please press and hold Button 1 until Red/Blue lights flashes alternately to enter Pairing Model. 1.2 Short press Button 1 of either headset, it will search the other one which in pairing state, and then try to pair with it. Note: Please do not press both Button 1 while starting the search operation ! 1.3 Within a few seconds, both headsets will turn off the red light, and then flashing slowly in blue. Pairing is finished. 1.4 To pair with another headset, repeat the above steps please. 2. After pairing successfully, just short press either of Button 1, then the intercom function will be activated. 3. Pairing is a one time process. Once the headsets are paired during this setup procedure, they will remain paired and automatically recognize each other whenever they are within available range. 4. Either of headset users wants to end the intercom talking function, just short press either of Button 1, and then the intercom function will be terminated. 5. Mobile phone has highest priority. Mobile phone call can interrupt the intercom call. The intercom will be restored automatically after phone call ended. 6. User can select to talk with the second rider or the third one (connect 3 riders at the same time) 6.1 Either of the talking riders wants to talk with the third one, just double click button 2, and then it will connect with the third rider who is on Standby. 6.2 The third rider who is in the standby state can initiate to call the other two who are in talking state, just double click button 2 to call the Riders. 6.3 The rider who been called will hear“dududu”, and the called rider can double click button 2 to accept and incoming intercom request, or just do nothing to ignore the request. (Please pair each other and everybody is on standby state while you want to use switch talking function among 3 headsets. This function can be used in rider to pillion and another rider, or rider to 2 riders.) Note: the mobile phone has to support Bluetooth Hands free protocol to realize rejecting, last number redialing and voice dial functions. For voice dial function, some mobile phones need user to manually set it in the mobile phone. Bluetooth Helmet Headset OPERATION Bluetooth Helmet Headset FUNCTIONS SPECIFICATIONS MUSIC OPERATION DWO - 3 Please refer to the devices user manual first. 1 PLAY / PAUSE >Bluetooth® Hands-free >Last number redial >Automatically answer call and voice dial >Reject a call >Independent mobile phone volume control and memorize >Mobile phone highest priority Under Bluetooth A2DP music play state, short press the button 2 to play or pause the music. 2 TRACK FORWARD Right twist button 2 to forward track. 3 TRACK BACKWARD Left twist button 2 to backward track. Note: The above funtion requires the music device to support Bluetooth A2DP and AVRCP. Supports HSP, HFF, A2DP, AVRCP, and Full Duplex intercommunication GPS NAVIGATOR OPERATION 1 Please pair GPS device and please refer to the GPS navigator user manual first to share the audio information from GPS via A2DP. 2 In phone or interoom call active and music-playing state, left twist and hold button 2 can go to turn down the volume, right twist and hold buttom 2 can go to turn up the volume, when reaching the maximum or minimun volume, a “DiDong” tone will be played. 3 Mobile phone or intercom calls have a higher priority than GPS audio. Mobile phone/intercom calls will interrupt the GPS audio. The audio will be restored automatically after the call has ended. LED Light Indicator LED Indicator type Indicated State All LED indicator off Red/Blue lights flashing alternately Blue light short flashing every 3 sec. Blue light long flashing every 3 sec. Red Led flash 2 times every 60 minutes Red Led indicator flash once every second Power off Pairing mode Standby state Connected state Battery is low Charging Red Led indicator shining still Charging completed >Bluetooth® A2DP music Play >Enjoy music from Mobile phone or other music sources >Remote control music play with AVRCP >Independent music volume control and memorize >Music third priority after phone call and intercom >Music volume soft restore back BATTERY CHARGING The unit has an embedded rechargeable battery. Please charge the unit for appox 3 hours before use. The red LED will shine still when the battery is fully charged. - Please use the USB cable gently, do not pull it too hard or the headset may be damaged. - In order to keep the battery capacity and extend it’s life, please store the headset in 15℃ to 25℃ environment while not use. The BiLT™ Bluetooth helmet headset is a water-resistant device, designed for use under moderate rain or snow conditions. However, the headset is not waterproof and should not be used under severe weather conditions. Note: Please do not use the headset while charging
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Creation Date--Text : Mod Date--Text : Producer : Adobe PDF library 10.01 Creator Tool : Adobe Illustrator CS6 (Windows) Create Date : 2012:12:03 09:38:05+08:00 Metadata Date : 2012:12:03 09:38:05+08:00 Modify Date : 2012:12:03 09:38:05+08:00 Thumbnail Width : 256 Thumbnail Height : 152 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12443 bytes, use -b option to extract) Format : application/pdf Title : NewBlueToothIntroduction_复制 N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 285.028597 Max Page Size H : 102.485906 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaNeueCE-Roman, HelveticaNeueLTPro-LtCn, HelveticaNeueLTPro-MdCnO, HelveticaNeueLTPro-BlkIt, HelveticaNeueLT-BoldCond, HelveticaNeueLT-Heavy, KhmerUI, KhmerUI-Bold, AdobeSongStd-Light Font Family : Arial, Helvetica CE 55 Roman, Helvetica Neue LT Pro, Helvetica Neue LT Pro, Helvetica Neue LT Pro, HelveticaNeue LT 57 Cn, HelveticaNeue LT 65 Medium, Khmer UI, Khmer UI, Adobe 宋体 Std Font Face : Regular, Regular, 47 Light Condensed, 67 Medium Condensed Oblique, 96 Black Italic, Bold, Bold, Regular, Bold, L Font Type : Open Type, TrueType, Open Type, Open Type, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.06, 001.001, Version 1.300;PS 001.003;hotconv 1.0.38, Version 1.300;PS 001.003;hotconv 1.0.38, Version 1.300;PS 001.003;hotconv 1.0.38, Version 6.1; 2002, Version 6.1; 2002, Version 5.00, Version 5.00, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, Helvetica Neue CE 55 Roman.ttf, HelveticaNeueLTPro-LtCn.otf, HelveticaNeueLTPro-MdCnO.otf, HelveticaNeueLTPro-BlkIt.otf, Helvetica LT 77 Bold Condensed.ttf, Helvetica LT 85 Heavy.ttf, khmerui.ttf, khmeruib.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 286 CVU Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: AutoCAD Color 2 Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 85.891497 Swatch Groups Colorants Magenta : 61.403799 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 0.000000 Document ID : xmp.did:5B45627CDE3CE211B58DB002DD300BD1 Instance ID : uuid:749936c2-b4f2-4b36-ab84-4a7f2ff79a64 Original Document ID : xmp.did:7A1908B7862CE211ACC2A088AE7BE001 Rendition Class : proof:pdf Derived From Instance ID : uuid:34f6b024-fdf1-4e71-8599-c1583b68e126 Derived From Document ID : xmp.did:C04772EF053AE211BC36E256C0AF10FC Derived From Original Document ID: xmp.did:7A1908B7862CE211ACC2A088AE7BE001 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:7A1908B7862CE211ACC2A088AE7BE001, xmp.iid:5B45627CDE3CE211B58DB002DD300BD1 History When : 2012:11:12 13:26:33+08:00, 2012:12:03 09:37:24+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : E:\Receiver\BoothIntrudution\BluetoothHelmetPhotograph.psd, E:\Receiver\BoothIntrudution\BluetoothHelmetPhotograph.psd, E:\Receiver\BoothIntrudution\BluetoothHelmetPhotograph.psd Page Count : 4 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools