Jing Mold Electronic Technology JME1123R Wireless Mouse User Manual

Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Wireless Mouse

user manual

Download: Jing Mold Electronic Technology JME1123R Wireless Mouse User Manual
Mirror Download [FCC.gov]Jing Mold Electronic Technology JME1123R Wireless Mouse User Manual
Document ID883381
Application IDJGR699wBe/Av6Cass9pMQA==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.99kB (237420 bits)
Date Submitted2007-12-22 00:00:00
Date Available2007-12-22 00:00:00
Creation Date2007-12-21 17:43:46
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2007-12-21 17:43:46
Document Titleuser manual

JME-1123R user guide
1、 Feature
1.1. Transmission mode:RF
1.2. Frequency:2410~2473MHz
1.3. RFchannel quantity:64
1.4. Center of Channel: 2410/2411/242…2471/2472/2473MHz
1.5. Width of Channel: 1MHz
1.6. Data Send timing: <500us
1.7. Power:2pcs *7# batteries
1.8. Modulate mode:GFSK
1.9. Effective distance:12m
1.10. Quantity of connection ID:24Bits (8,388,608 ID can be used)
1.11. No. of keys:3key
1.12. Dots per inch : 500/1000 dpi selectable
1.13. Low battery indicating voltage:2.2V@5%
2、 Use guide
2.1 Battery Installation or Replacement
a. Unlock the battery cover
b. Remove the battery
c. install the new battery.
Caution:
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions
2. 2
Binding
Need to check and bind for the first time of usage only, Please bind as below
a. First, confirm the receiver has been connected to the computer.
b. Move the switch from “OFF” to “L” or “H” to select appropriate DPI
H: 1000 DPI
L: 500 DPI
OFF: Turn Off
c. With the mouse close to the receiver within 50cm,press the left key within 5 seconds, when
the receiver’s led twinkles 4 times,the mouse is ready to be used
2.3 Low battery
The LED will turn red when the battery voltage is lower than 2.2V.
Please replace the battery When LED turn red.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void theuser's authority to operate the equipment.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions : (1) this device may not cause harmful
interference,and (2) this device must accept any interference received,
including interferencethat may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:12:21 17:43:46+08:00
Modify Date                     : 2007:12:21 17:43:46+08:00
Page Count                      : 2
Creation Date                   : 2007:12:21 09:43:46Z
Mod Date                        : 2007:12:21 09:43:46Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2007:12:21 09:43:46Z
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FPWJME1123R

Navigation menu