Jing Mold Electronic Technology JME3272B USB Dongle User Manual JME 7596C Manual

Download:
Mirror Download [FCC.gov]
Document ID	1610779
Application ID	4wUtOBbAG3So8oe1cObE/g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.52kB (106465 bits)
Date Submitted	2011-12-28 00:00:00
Date Available	2011-12-28 00:00:00
Creation Date	2011-12-28 16:48:41
Producing Software	pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	JME-7596C Manual.doc
Document Creator	pdfFactory Pro www.fineprint.cn
Document Author:	lokher

JME-7596C Wireless Keyboard
JME-3272B USB Receiver
User’s Guide
1
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
2
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
this equipment.
This device complies with FCC RF radiation exposure
limits set forth for general population (uncontrolled
exposure). This device must not be collocated or
operating in conjunction with any other antenna or
transmitter.
Caution:
*Risk of explosion if battery is replaced by an incorrect
type.
3
*Dispose of used batteries according to the instructions.
*Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment
R & TTE Compliance Statement
This equipment complies with all the requirements of
the DIRECTIVE 1999/5/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL OF 9 March 1999
on radio equipment and telecommunication terminal
equipment and the mutual recognition of their
conformity (R & TTE).
4
Feature
Transmission mode: RF 2.4G
Frequency: 2400~2483MHz
RF channel quantity: 78
Bandwidth of Channel: 1MHz
Data send timing: <500us
Keyboard power: 2 × AAA batteries
Receiver power: 5V
Modulation mode: GFSK
Effective distance: 10m
Number of keys:
Low battery indicating voltage:2.2V@5%
Operational Temperature: +5 ~ +40℃
109 keys
System Requirements
Microsoft Windows 98/ME/2000/XP/Vista/7 or
later version
An available USB port
Installation & Use
5
Plug the USB receiver into a computer’s USB port:
□ Windows 98 SE/ME
The system finds new device and prompts you to
insert the operating system CD-ROM. Follow the
instructions on the screen to install the required
drivers.
□ Windows 2000/XP/Vista/7
The operating system identifies the receiver as a
“USB Human Interface Device” and begins
installation automatically. When completed, the
system will prompt that “You new hardware is
installed and ready to use.”
Remove the keyboard battery compartment cover.
Connect Button
Battery Cover
Power Switch
Install batteries with the positive (+) & negative (-)
6
in the correct direction indicated by the AAA
battery compartment label.
Replace the battery compartment cover.
Switch on the Keyboard.
Before first time of use, you need to connect the
keyboard to the receiver as below:
With the keyboard close to the receiver within
50cm and press the connect button.
In normal use, the led on the receiver blinks
according to the wireless keyboard’s operation, if
the keyboard and mouse are not in operation, the
led is off.
Keyboard LED function
Low Battery----This LED will be lit if the
battery power is low, you should replace the
battery right now.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Title                           : JME-7596C Manual.doc
Author                          : lokher
Creator                         : pdfFactory Pro www.fineprint.cn
Producer                        : pdfFactory Pro 3.52 (Windows XP Professional Chinese)
Create Date                     : 2011:12:28 16:48:41+08:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools