Jing Mold Electronic Technology JME8001R Wireless Keyboard User Manual LXH JME8001R Manual

Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Wireless Keyboard LXH JME8001R Manual

USer manual

LXH-JME8001R user guide 1、、、、 Feature 1．1． Transmission mode：RF 1．2． Frequency：2400~2483.5MHz 1．3． RF channel quantity：77 1．4． Center of Channel: 2402/2403/2404…2476/2477/2478MHz 1．5． Channel Interval: 1MHz 1．6． Width of Channel: 1MHz 1．7． Data Rate: < 1Mbps 1．8． Data Send timing: <500us 1．9． Power：2pcs *7# batteries 1．10． Modulate mode：DSSS 1．11． Effective distance：10m 1．12． No. of standard keyboard keys：84key 1．13． No. of mouse keyboard keys: 3 (2 left keys+1 right key) 1．14． Touchpad resolution: 300 DPI 1．15． Battery low voltage indicating threshold value: 2.2V@5% 2、、、、 Use guide 2. 1. First, confirm the receiver has been connected to the computer. 2. 2. Put the batteries into the batteries casket, lock the cover. 2. 3. Press power button on left side of the keyboard to turn on power. For the first time of usage , please bind the keyboard to the receiver as below: With the keyboard close to the receiver within 50cm, press the Fn+F11 key on the keyboard , when the all the touchkey symbol twinkles 4 times, binding is completed. 3、、、、 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Change or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installationl. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu