Jing Mold Electronic Technology LBK500 Bluetooth Keyboard Cover User Manual Manual
Jing Mold Electronic Technology (Shen Zhen) Co., Ltd. Bluetooth Keyboard Cover Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1958996 |
| Application ID | 1r6ZCVYMScSygTNkMjdItw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 337.22kB (4215193 bits) |
| Date Submitted | 2013-05-07 00:00:00 |
| Date Available | 2013-05-07 00:00:00 |
| Creation Date | 2013-04-09 13:57:11 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2013-04-18 13:26:11 |
| Document Title | Manual |
| Document Creator | Adobe Acrobat 7.0 |
lenovo. Bluetooth Keyboard Cover —LBK500 ideatab, Product Introduction This Bluetooth Keyboard Cover is configured with a fixed slot to support the S6000 tablet and wirelessly connects to the tablet via Bluetooth 3.0 to facilitate text input. The special function keys on the keyboard can be used to adjust the brightness and volume of the tablet and control media playback and communication connections (for details,please refer to the Special Function Keys section). fixed Hot specmlfuncnon keys Buttons and LEDs ‘ ‘77 i: / / / LJSB charging \ ,\ X a // //‘f:// /- Interface \\ \. . (q ,q§ “\ \ k \ \ / \\\ . \. ~ \\ Power swrtch \§\ f Connection key Status LED Flashing red Low battery Charging (The LED will turn off when the charging is complete.) red Connecting to a previously paired device (If the Bluetooth, slow flashing connection is achieved,it will turn off in 3 seconds.) In the process of pairing (It can be discovered by Bluetooth,quick flashing other devices,and the LED will turn off in 3 seconds if the pairing is achieved.) Product parameters Li—ion Polymer Battery (Irreplaceable) Battery capacity SOOmAh Charging current 250mA Charging the Bluetooth Keyboard Before you use the Bluetooth Keyboard Cover for the first time or when the battery is completely dischargedjt takes about 3 hours to fully charge the unit. To charge the Bluetooth Keyboard Cover,connect the Micro USB end of the charging cable to the USB charging port on the Bluetooth Keyboard Cover,and connect the USB end of the charging cable to a USB port on a computer or charger.When the red status LED is on, it indicates that the Bluetooth Keyboard Cover is charging. Please use the supplied USB charging cable.The use of another charging cable not meeting the required specifications may cause damage. Note: The Bluetooth Keyboard Cover can also be charged when it is shut down. Connecting to the Tablet To use the Bluetooth Keyboard Cover for the first time,you need to pair it with your S6000 tablet. SteplzTurn the power switch on the side of the keyboard to the ON position.The status LED will turn on for 2 seconds and then go off.Press the 6 button on the side of the keyboard.The keyboard status LED will flash,and the keyboard will be discoverable by other devices. Step2: Go to H: > Settings >Bluetooth on the S6000 tablet and set the Bluetooth status to-. Step3: The tablet will display SEARCHING... in the top right corner of the screen. If this is not displayed,touch SEARCH FOR DEVICES in the top right corner. Step4: Select LBK500_US from the Available devices list on the screen. When the screen shows that you are connected to LBK500_US,this indicates that the pairing between the keyboard and the tablet is complete. 7.. .. ‘7” D Settings StAHunnH utv ms WIRELESS 8‘ NETWORKS " W'~F' orr ' ' ' ‘ |deaTabS6000~F Dilly w; LI‘L‘ 1g ljd ILLI deuce: Bluetooth PAIRED DEVICES 0 Data usage . LB<5uu_us Cm HM ‘m’l More... DFVICF 1: Sound Supporting Tablet for the S6000 tablet by placing it horizontally in the central groove,as shown in the following figure. Note: When using the Bluetooth Keyboard Cover as a stand,do not press or hit the tablet forcefully,in order to avoid damage to the Bluetooth Keyboard Cover. Special Function Keys Application & access on Display '—| View running I I I Display all an homepage El applications ::: applications ‘3 Return Q Find ¢e7 Start web browser Display input method Menu SYM selection interface Communication (« i) Turn On/Off Turn On/Off 36 A Wi-Fi network connection Screen display :01 _ Decrease screen :61 + Increase screen 8 Lock screen 0 . ~ brightness ' . ‘ brightness Volume fl Decrease fl Increase Mute fl volume + volume Media play I‘ Next >I Previous >|| Play/pause Learn more For more information about IdeaTab functions and useful manuals, go to httpflsupportlenovocoml .To read this manual on your IdeaTab, please access ”User Guide" from the Browser favorites in your IdeaTab. Getting support For support on network service and billing, please contact your wireless network operator. For instructions on how to use your IdeaTab, go to httpflsupport.|enovo.com[. Legal notices Lenovo, the Lenovo logo, and IdeaTab are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. First Edition (October 2013) © Copyright Lenovo 2013. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration ”GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F—05925. Reduoel Reusel Recycle 0, k: 14851 1419 Printed in China Appendix FCC Statement Warning: Changes or modifications to this unit not expressly approved by theparty responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (I) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément a la réglementation d'lndustrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inf érieur) approuvé pour I'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique a l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonn ée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire a l'établissement d'une communication satisfaisante. Le présent appareil est conforme aux CNR d'lndustrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoris é e aux deux conditions suivantes: (I) I'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de I'appareil doit accepter tout brouillage radioélectrique subi, méme si le brouillage est susceptible d'en compromettre le fonctionnement. Recyble & Disposal lnstruction(WEEE DIRECTIVE) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was _ purchased. They can take this product for environmental safe recycling.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2013:04:18 13:26:11+08:00 Create Date : 2013:04:09 13:57:11+08:00 Metadata Date : 2013:04:18 13:26:11+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:98285a5b-0b57-496e-b57c-abe5635b55c6 Instance ID : uuid:5bae545d-3b10-454c-8970-4599e9c6483c Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Has XFA : No Page Count : 10 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools