Jinghong FK126MW Wireless Silicone Keyboard User Manual Keyboard Guide english
Jinghong Industrial (Hong Kong) Co., Limited Wireless Silicone Keyboard Keyboard Guide english
Jinghong >
Users Manual
RF Keyboard User' s Guide
work frequency:2.4GHz
Welcome
Your wireless keyboard uses digital radio technology to connect with your computer. The
communication between the keyboard and your computer is achieved by using highly precise and
reliable radio waves. It does not require in-sight usage as the infra-red one does, since radio waves
can penetrate non-metallic objects as: wood, mirror etc, and it can radiate signals full 360 degree
direction! So you can place your receiver anywhere. By using our keyboard, you do not have to let
bulky cables occupy your table.
Your wireless keyboard comes with multimedia keys and an internet access key, which is
compatible with Windows ME, Windows 2000,Windows XP. The multimedia control function is
then installed in your computer, which means you can access through the internet quickly, too.
The Batteries
The cordless keyboard uses two AAA alkaline batteries, they can be used for more than six
months under proper usage.
Installing the Batteries into the Keyboard
Step 1.Remove the battery compartment cover (on the bottom of the keyboard) as the arrow in the
picture to open it.
Step 2.Insert the AA alkaline batteries as shown inside the battery compartment.
Step 3.Replace the cover carefully.
We’ve also developed low voltage warning circuit. During using of the keyboard, when
the voltage is low, the keyboard will send the low voltage signal to the receiver, then the
marked COM red LED will keep flashing, reminding you of low voltage warning
signal, until there, no warning signal from the keyboard. When there, low voltage signal
warning, please replace the batteries in time, we suggest you use same specification
batteries, and avoid usage of new and old ones.
When you use the keyboard, if you find the input of the letters is slow, abnormal, or
having no reaction, may be it, low voltage, please check the batteries.
Indicating lights of the Receiver
1.COM: communication light/low voltage warning light.
When receiving positive signals from the mouse or keyboard, the light will be shinning.
When the wireless keyboard or mouse is low voltage, there,s warning signal being
sent to the receiver, the COM indicating light will keep flashing, until there,s no
warning code in the signal.
Connecting the Receiver
Your RF keyboard use reliable radio waves to communicate with your computer and does
not have bulky cables. Radio waves transmitted by the keyboard are receiver by the receiver,
then through the receiver connect to your personal computer.
Establishing the Communication Channel between the Keyboard and the Receiver
1.Press the CONNECT button at the left side of the keyboard once.
2.Then, within 5 seconds, press the CONNECT button on the receiver. Waiting for 10
seconds, if succeed in communication, the keyboard should be used normally, at the
same time the communication indicator LED will light on. If the keyboard fails to be
working normally after 10 seconds, please repeat the previous steps again.
Working Circumstance
After you have installed the receiver, you are ready to place the keyboard on your desktop.
Before you enjoy a great feeling of convenience from the advanced digital, please check the
following aspects to optimize the use of your wireless keyboard:
For optimal performance, placing the receiver at least 20 centimetres away from the PC
case, monitor, external disk drive, or other electrical devices, just to prevent disturbance.
Radio waves can penetrate through non-metallic objects like: wood, mirror, etc, and can
radiate signal full 360 degree direction, but it can not penetrate through metallic objects, so,
keyboard and mouse and receiver should not be placed on metal desktop, suggest placing them at
least 20 centimetres away from such metal objects.
Between the keyboard and receiver, there should not be big metal plate which will affect the
transmitting and the receiving of radio signals.
We give out the standard testing receiving distance based under the normal radio wave
interference circumstance. Generally the distance can be a little longer. But if there are stir
machine, motor, or electric drill, etc, such interference nearby may cause the cursor
moving slowly, abnormally, etc. Then you can shorten the distance between the receiver
and the keyboard, so as to overcome such disturbance.
Using the Hot Keys
The cordless keyboard comes with eight multimedia keys and four internet keys. All of these
hot keys are compatible with Windows ME, 2000, XP.
The Functions of Hot Keys
1.The eight hot keys are compatible with the Windows Media Player, (Start-Program-
Accessory-entertainment-Windows Media Player)
1) Media 2) Play/Pause 3) Prev Track 4) Next Track
5) Volume- 6) Volume+ 7) Mute 8) Stop
2. Internet Keys
1) WWW 2) E-mail 3) Forward 4) Backward
5)Search 6)Refresh 7)Favorites 8)WWW Stop
3:Windows Power Key
1)My computer 2)Calculator 3)Power 4)Sleep 5)Wake Up
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.