Jiuheng Intelligent Technology G01U Mini Smart Socket User Manual 10

Shenzhen Jiuheng Intelligent Technology Co.,Ltd Mini Smart Socket 10

10 user manual

Mini Smart Socket Instruction
Rated voltage:125VAC
Rated current:10A
Max.load power: 2200W
AC frequence:60HZ
Download & Registration
1.Scan the QR code to download Pooley Smart Application.
2. Enter the register/login interface, input the phone number for getting
verification code to register or through other methods at the bottom of
page connecting to related authorization interface to log in .
EZ Mode(Recommend)
Preparation:Device has connected with electricity,long press on/off button for 5
seconds until indicator light quickly flashes, the application already stepped into
"My Device" interface.
Phone has connected to WiFi router and been able to connected to Internet.
Tap the icon "+" on the middle of "My Device", enter into "Add Device".
(Make sure the indicator light is flashing quickly,then tap the related button in
application.)
(Choose the local WiFi and enter the correct password, tap "Next".)
Wait for configuring successfully,then tap "Complete".
(AP Mode)
If failed in EZ mode,skip to AP mode,or tap the icon "+" on the middle of
"My Device", enter into "Add Device",tap "AP mode" at the top right
corner .
Long press on/off button until indicator light slowly flashes,then tap the
related button in application, enter into another
Tap "Connect now", choose WiFi hotspot named "XXX",,then back to
Pooley Smart application.)
Wait for configuring successfully,then tap "Complete".
Warrant
Any quality problem arise within 7 days after purchasing date,customer could
choose to return money at once or change new product;
Any quality problem arise within 15 days after purchasing date,customer could
change new product;
Non-Warranty
Damages caused by force majeure,like flood,fire,thunderstroke,etc;
Damages caused by improper use or vandalism;
Damages caused by non-professional workers dismantling;
Normal decoloring,wear and consumption while using;
Being not available caused by internet itself.
Warnning:
1.Strictly prohibit bundle conductor when use to avoid it be over heal;
2.Please insert the plug completely to the socket;
3.Do not use under wet conditions ;
4.The total power of the electric appliances connected should below the max.
power whitch can load ;
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.

Navigation menu