John Deere 647 Users Manual

!! John-35 John Deere Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

647 to the manual 25cd7c6b-31e3-4ab4-a03e-bc82b1f3d4ef

: John-Deere John-Deere-647-Users-Manual-466083 john-deere-647-users-manual-466083 john-deere pdf

Open the PDF directly: View PDF .
Page Count: 2

FEATURES

647 R

OTARY

T

ILLER

,

P

LOW

,

D

ISK

,

C

ULTIVATOR

,

AND

G

ENERATOR FOR

X700 U

LTIMATE

™

T

RACTORS

1) 647 ROTARY TILLER

•The 647 Rotary Tiller is ideal for homeowners

and commercial customers such as golf courses,

hospitals, schools, and nurseries.

•Mounts to all X700 Ultimate™Tractors equipped

with a 3-point hitch and 540-rpm rear PTO.

•Large, replaceable tines and a heavy-duty tubular-

tine shaft provide excellent performance and

durability. Able to lift and mix soil for a uniform

seedbed.

•The tine housing is formed high with plenty of

clearance around tines for rocks and trash to

pass through or recirculate without getting

caught in the tines.

•Side-shaft-driven design allows tines to be

evenly spaced to the full 48-inch width of

the machine.

•Hinged tine shield follows the ground surface

to smooth the soil for a good seedbed. Cowling,

end-covers, and a rear shield trap rocks and

other debris, protecting operator, bystanders,

and buildings.

•Tiller is raised and lowered by the tractor

hydraulic-lift system. Skid shoes on each side

of the tiller housing provide more-precise tilling

depth. Four adjustable positions accommodate

various tilling conditions.

•Preset friction clutch in tiller drive assembly

provides protection for both the tiller and tractor

drivelines.

NOTE: Ballast may be required on some models.

See John Deere Price List or Operator’s Manual

for required ballasting.

2) PLOW

•Ideal for the gardener, nursery or landscape

contractor.

•Mounts to all X-Series Tractors equipped with

a 3-point hitch.

•This heavy-duty plow is specifically designed

for deep tillage or breaking up fields and plots

of sod.

3) DISK

•Perfect for homeowners, nurseries and

landscape contractors.

•Mounts to all X700 Series Tractors equipped with

a 3-point hitch.

•Designed for smoothing out ground and breaking

up large dirt clods caused by plowing, this

unit is also handy when preparing seed beds

for planting.

4) CULTIVATOR

•Designed for homeowners, gardeners

and nurseries.

•Mounts to all X700 Series Tractors equipped with

a 3-point hitch.

•The best solution for shallow tillage in

lighter soils.

•Can be used to weed row crops or for seed

bed preparation.

5) 10K GENERATOR

•Conveniently mounted to 3-Point Hitch for

easy transport.

•Powered by Tractors 540 RPM PTO to eliminate

the need for a separate engine.

•10,560 watts peak and 9600 watts of

continuous power.

•120- and 240-volt outlets.

1

3

4

2

5

C&CE P

URCHASING

G

UIDE

2006

193

SPECIFICATIONS

647 Rotary Tiller for X700 Series Tractors

Tilling Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 in. (1219 mm)

Rotor Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 in. (356 mm)

Rotor Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 in. (1219 mm)

Rotor Bearing (Left End) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ball bearing in oil bath

Rotor Bearing (Right End) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Greaseable ball bearing

Counter Shaft Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sealed ball bearings

Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tractor 540-rpm PTO

Rotor rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253 rpm

Rotor Tip Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .929 ft./min. (283 m/min)

Height of Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71⁄2in. (191 mm)

Tilling Depth (Maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 in. (178 mm)

Weight (Approx.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321 lb. (146 kg)

Plow for X700 Series Tractors

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 bottom, 3-point hitch mounted (Category 1 or Limited Category 1)

Mainframe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Twin solid steel beams, 1⁄2in. x 21⁄4in. (13 mm x 57 mm)

Furrow Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Manually adjustable from 8- to 14-in. (203- to 356-mm)

Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Welded 3⁄4-in. x 2-in. (19 mm x 51 mm) heat-treated steel

Type of Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shear bolt (standard equipment)

Depth Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Adjustable gauge wheel

Maximum Plowing Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 in. (152 mm)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 lb. (53 kg)

Disk for X700 Series Tractors

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tandem disk, 3-point hitch mounted (Category 1 or Limited Category 1)

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 in. (1321 mm), adjustable from 42- to 52-in. (1067- to 1321-mm) working width

Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bolted construction, designed to hold concrete blocks for ballast

Gang Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tandem

Gang Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x 3-in. (51 x 76 mm) angle iron

Gang Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Adjustable 10-, 15-, or 20-degrees

Gang Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Greaseable

Gang Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3⁄4-in. (19 mm) round

Blade Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-in. (279 mm) diameter, 13-gauge steel

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198 lb. (90 kg)

Cultivator for X700 Series Tractors

Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-point hitch mounted (Category 1 or Limited Category 1)

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 in. (1168 mm), adjustable from 30- to 46-in. (762- to 1168-mm) working width

Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21⁄2-in. x 21⁄2-in. (64 x 64 mm) 5⁄16-in. (8 mm) angle iron

Shanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 heavy duty 1⁄4-in. (6 mm) thick tempered hot-rolled steel

Mast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steel; double-braced front to rear

Under-mast Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 in. (51 mm)

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 lb. (36 kg)

Generator for X700 Series Tractors

Weight (Operating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194 lb. (88kg)

Height (Approximate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30.75 in. (78.1 cm)

Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.13 in. (68.9 cm)

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31.25 in. (79.4 cm)

PTO Input Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-spline, 1-3/8-in diameter

Gear Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80W90 GL Gear Lube

Gear Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.63 L (23 oz.)

Watts (AC Rated):

(Continuous) at Power Factor 1 . . . . . . . . . . . . . . . . . . . . . . . .9600

(Peak) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10560

Rated Voltage (AC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120/240

Rated Amperage:

(120 VAC) at Each Outlet at 40˚ C (104˚ F) . . . . . . . . . . . . . . . . . . . . .20

(240 VAC) at Outlet at 40˚ C (104˚ F) . . . . . . . . . . . . . . . . . . . . .40

Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Hz

Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single

C&CE P

URCHASING

G

UIDE

2006

194