John Deere Cx15 Users Manual 08 2526
CX20 to the manual 8ecbb927-5eed-4e6d-a6ae-4b48829b2400
2015-02-03
: John-Deere John-Deere-Cx15-Users-Manual-465904 john-deere-cx15-users-manual-465904 john-deere pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Return to Index HX15, CX15, HX20, CX20 HEAVY-DUTY FLEX-WING ROTARY CUTTERS WARNING! SAFETY CHAIN SHIELDING IS AVAILABLE FOR ALL CUTTERS. Because of the possibility of injury or damage from thrown objects, improperly used rotary cutters are potentially dangerous. Optional Front and Safety Shielding is strongly recommended for deflecting objects when cutters are used in a populated area or when additional safety precautions are needed. (Refer to Operator’s Manual for owner’s responsibility and detailed safety procedures.) FEATURES The HX15, CX15, HX20 and CX20 are 15-ft. and 20-ft., 3-section flex-wing rotary cutters suited for applications ranging from pasture maintenance and/or crop shredding to intensive, high-hour, commercial roadside mowing. THE HEAVY-DUTY HX15 AND HX20 ARE MEANT FOR: • Farmers and ranchers with large-acreage pasture maintenance. • Private, commercial or governmental grass maintenance averaging approximately 300 hours of annual usage for 10 years (i.e., 3,000-hour machine life expectancy). • The HX20 is also available as 13.5-ft. flex-wing rotary cutter with a 6-in. blade overlap by ordering as a 2-section flex wing with weight box on the left side. THE COMMERCIAL-DUTY CX15 AND CX20 ARE MEANT FOR: • Farmers and ranchers with very large-acreage pasture maintenance and/or typically very hard and very rough ground. • Private, commercial or governmental grass maintenance averaging approximately 500 hours of annual usage for 10 years (i.e., 5,000 hour machine life expectancy). • The CX15 is also available as 10-ft., 2-section flex-wing rotary cutter with a 6-in. blade overlap and the CX20 as 13.5-ft., 2-section flex wing by ordering with a weigth box in place of the left wing. • Tractor with a minimum of 55 horsepower (41 kW) is required to operate HX15 and CX15 Rotary Cutters. Drawbar must have minimum of 1,960 lb. static load rating for HX15 and 2,115 lb. (960 kg) static load rating for CX15.Tractor with a minimum of 75 horsepower (56 kW) is required to operate HX20 and CX20 Rotary Cutters. Drawbar must have minimum of 2,640 lb. (12 KN) static load rating. 130 C&CE P URCHASING G UIDE 2008 COMPATIBILITY CHART Rotary Cutter Tractor HX15 & CX15 5325 and larger HX20 & CX20 6403 and larger Return to Index SPECIFICATIONS HX15 CX15 Capacity: Cutting Width. . . . . . . . . . . . . . . . . . . . . . . . . . 15 ft. (4572 mm) Cutting Height and Transporting Clearance. . 1 to 16 in. (25 to 406 mm) for clearance while going over terraces Cutting Capacity (Diameter) . . . . . . . . . . . . . 3 in. (76 mm) Cutting Chamber Depth . . . . . . . . . . . . . . . . . 10.5 in. (267 mm) 15 ft. (4572 mm) 1 to 16 in. (25 to 406 mm) for clearance while going over terraces 4 in. (102-plus mm) 10.5 in. (267 mm) Tractor Compatibility: Tractor PTO Horsepower Range . . . . . . . . . 55 plus Tractor PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 or 1000 Static Vertical Drawbar Load Rating. . . . . . 1,960 lb. (890 kg) 55 plus 540 or 1000 2,115 lb. (960 kg) Hitch: Hitch Type and Category . . . . . . . . . . . . . . . . Pull-type with standard self-level hitch clevis Hitch Width . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5 in. (570 mm) for tight turn capability Jackstand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stays vertical while raising and lowering Pull-type with ball-type self-level hitch clevis for easy hookup and long, trouble-free operating life of clevis and tractor drawbar 22.5 in. (570 mm) for tight turn capability Stays vertical while raising and lowering Dimensions: Transport Width. . . . . . . . . . . . . . . . . . . . . . . . Transport Height . . . . . . . . . . . . . . . . . . . . . . . Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . Deck Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 in. (2800 mm) at wing wheels 110 in. (2800 mm) at wing wheels 80 in. (2030 mm) 80 in. (2030 mm) 183 in. (4726 mm) 183 in. (4726 mm) 194 in. (4932 mm) 194 in. (4932 mm) Easy-to-clean, dome-shaped top deck “Double Decker” design for superior strength and attractive appearance, deck dents don’t show Deck Thickness: Upper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skirt Thickness . . . . . . . . . . . . . . . . . . . . . . . . Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hinge Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximate Weight. . . . . . . . . . . . . . . . . . . . 0.118 in. (11 gauge) (3.0 mm) 0.138 in. (10 gauge) (3.5 mm) 0.25 in. (6 mm) Intermittent, greaseable, steel forgings 1 in. diameter full length 5,250 lb. (2386 kg) Drivelines: Driveline Size: Main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Constant-velocity Category 5 tubular telescoping profiles Connecting . . . . . . . . . . . . . . . . . . . . . . . . . Category 5 tubular telescoping profiles Driveline Protection: Main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No-seize self-adjusting slip clutches Connecting . . . . . . . . . . . . . . . . . . . . . . . . . No-seize self-adjusting slip clutches Gearcases: Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gearcase Horsepower Rating: Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blades: Thickness × Width × Length . . . . . . . . . . . . . Blade Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blade Overlap . . . . . . . . . . . . . . . . . . . . . . . . . Blade Rotation. . . . . . . . . . . . . . . . . . . . . . . . . 540 rpm Blade Tip Speed. . . . . . . . . . . . . . . . 1000 rpm Blade Tip Speed. . . . . . . . . . . . . . . Material Flow System . . . . . . . . . . . . . . . . . . Blade Holder, Diameter . . . . . . . . . . . . . . . . . 0.138 in. (10 gauge) (3.5 mm) 0.177 in. (7 gauge) (4.5 mm) 0.25 in. (6 mm) Continuous, greaseable, steel forgings for a lifetime of trouble-free use 1 in. diameter full length 5,650 lb. (2568 kg) Constant-velocity Category 5 splined telescoping profiles* Category 5 splined telescoping profiles* No-seize self-adjusting slip clutches No-seize self-adjusting slip clutches 4 4 210 hp (peak) 160 hp (continuous) 150 hp (peak) 120 hp (continuous) 150 hp (peak) 120 hp (continuous) 240 hp (peak) 160 hp (continuous) 160 hp (peak) 120 hp (continuous) 160 hp (peak) 120 hp (continuous) ½×4×19.75-in. (13×102×502 mm) resist bending better Suction or dual Suction or dual 6 in. (152 mm) 6 in. (152 mm) From left to right, CW, CCW, CCW to cut wheel track material 15,586 ft./min. (79.2 m/s) 15,586 ft./min. (79.2 m/s) 15,837 ft./min. (80.5 m/s) 15,837 ft./min. (80.5 m/s) Smooth, obstruction-free ‘’Max Flow’’ cutting chamber for a clean cut and no windrows 37.0-in. (945 mm) center/26.4-in. (670 mm) wing; 37.0-in. (945 mm) center/26.4-in. (670 mm) wing; bar or stump jumper bar or stump jumper for protection of blades and and standard deck rings for maximum protection of blades and carrier against obstruction damage blade carrier against obstruction damage Hydraulics: Wing Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard, includes spring-assist unfolding Wing Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 degrees up, 22 degrees down Wheels: Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-bolt 21×5.25×9 laminated or 24×8×14, 20PR severe-duty Ag Tire Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring suspension on all 4 wheel standards Row Width Adjustable . . . . . . . . . . . . . . . . . . Yes for most row spacings Wing Leveling Adjustment . . . . . . . . . . . . . . Easy-adjust turnbuckle with bearing Standard, includes spring-assist unfolding 90 degrees up, 22 degrees down 5-bolt 21×5.25×9 laminated or 26×9×14.5, 24PR severe-duty Ag Tire ‘’Ground Control’’ suspension with air springs and shock absorbers on all 4 wheel standards for better durability of axles and axle-to-frame interface Yes for most row spacings Easy-adjust turnbuckle with bearing Shielding: Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chain, double-row chain, or rubber protected behind front frame Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chain, double-row chain, or rubber Gearcase Warranty . . . . . . . . . . . . . . . . . . . . 3 years 3 years * Splined profiles telescope easier under load and provide longer life. 131 C&CE P URCHASING G UIDE 2008 Return to Index SPECIFICATIONS Capacity: Cutting Width. . . . . . . . . . . . . . . . . . . . . . . . . . Cutting Height and Transporting Clearance . Cutting Capacity (Diameter) . . . . . . . . . . . . . Cutting Chamber Depth . . . . . . . . . . . . . . . . . HX20 CX20 20 ft. (6096 mm) 1 to 16 in. (25 to 406 mm) for clearance while going over terraces 3 in. (76 mm) 10.5 in. (267 mm) 20 ft. (6096 mm) 1 to 16 in. (25 to 406 mm) for clearance while going over terraces 4 in. (102-plus mm) 10.5 in. (267 mm) Tractor Compatibility: Tractor PTO Horsepower Range . . . . . . . . . 75 plus Tractor PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . 540 or 1000 Static Vertical Drawbar Load Rating. . . . . . 2,560 lb. (1165 kN) 75 plus 540 or 1000 2,640 lb. (1200 kN) Hitch: Hitch Type and Category . . . . . . . . . . . . . . . . Pull-type with standard self-level hitch clevis Hitch Width . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5-in. (570 mm) for tight turn capability Jackstand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stays vertical while raising and lowering Pull-type with ball-type self-level hitch clevis for easy hookup and long, trouble-free operating life of clevis and tractor drawbar 22.5-in. (570 mm) for tight turn capability Stays vertical while raising and lowering Dimensions: Transport Width. . . . . . . . . . . . . . . . . . . . . . . . Transport Height . . . . . . . . . . . . . . . . . . . . . . . Overall Width. . . . . . . . . . . . . . . . . . . . . . . . . . Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . Deck Shape . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 in. (3400 mm) at wing wheels 134 in. (3400 mm) at wing wheels 106 in. (2690 mm) 106 in. (2690 mm) 246 in. (6250 mm) 246 in. (6250 mm) 227 in. (5760 mm) 227 in. (5760 mm) Easy-to-clean, dome-shaped top deck ‘’Double Decker’’ design for superior strength and attractive appearance, deck dents don’t show Deck Thickness: Upper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skirt Thickness . . . . . . . . . . . . . . . . . . . . . . . . Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hinge Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximate Weight. . . . . . . . . . . . . . . . . . . . 0.118 in. (11 gauge) (3.0 mm) 0.138 in. (10 gauge) (3.5 mm) 0.25 in. (6 mm) Intermittent, greaseable, steel forgings 1 in. diameter full length 6,710 lb. (3050 kg) 0.138 in. (10 gauge) (3.5 mm) 0.138 in. (10 gauge) (3.5 mm) 0.25 in. (6 mm) Continuous, greaseable, steel forgings for a lifetime of trouble-free use 1 in. diameter full length 7,350 lb. (3350 kg) Constant-velocity Category 5 tubular telescoping profiles Category 5 tubular telescoping profiles Constant-velocity Category 5 splined telescoping profiles* Category 5 splined telescoping profiles* No-seize self-adjusting slip clutches No-seize self-adjusting slip clutches No-seize self-adjusting slip clutches No-seize self-adjusting slip clutches 4 4 210 hp (peak) 160 hp (continuous) 150 hp (peak) 120 hp (continuous) 150 hp (peak) 120 hp (continuous) 250 hp (peak) 160 hp (continuous) 160 hp (peak)120 hp (continuous) 160 hp (peak) 120 hp (continuous) Drivelines: Driveline Size: Main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting . . . . . . . . . . . . . . . . . . . . . . . . . Driveline Protection: Main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting . . . . . . . . . . . . . . . . . . . . . . . . . Gearcases: Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gearcase Horsepower Rating: Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blades: Thickness x Width x Length . . . . . . . . . . . . . Blade Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blade Overlap . . . . . . . . . . . . . . . . . . . . . . . . . Blade Rotation. . . . . . . . . . . . . . . . . . . . . . . . . 540 rpm blade Tip Speed . . . . . . . . . . . . . . . . 1000 rpm Blade Tip Speed. . . . . . . . . . . . . . . Material Flow System . . . . . . . . . . . . . . . . . . Blade Holder, Diameter . . . . . . . . . . . . . . . . . ½×4×26.5-in. (13×102×670 mm) resist bending better ½×4×26.5-in. (13×102×670 mm) resist bending better Suction or dual Suction or dual 6 in. (152 mm) 6 in. (152 mm) From left to right, CW, CCW, CCW to cut wheel track material From left to right, CW, CCW, CCW to cut wheel track material 16,087 ft./min. (81.7 m/s) 16,087 ft./min. (81.7 m/s) 16,346 ft./min. (83 m/s) 16,346 ft./min. (83 m/s) Smooth, obstruction-free ‘’Max Flow’’ cutting chamber for a clean cut and no windrows 31.7-in. (805 mm) bar or stump jumper for protection of blades 31.7-in. (805) bar or stump jumper for maximum protection of blades and carrier against obstruction damage and standard deck rings and blade carrier against obstruction damage Hydraulics: Wing Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard, includes spring-assist unfolding Wing Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 degrees up, 22 degrees down Wheels: Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-bolt 21×5.25×9 laminated or 24×8×14-20PR Severe-duty Ag Tire Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring suspension on all 4 wheel standards Standard, includes spring-assist unfolding 90 degrees up, 22 degrees down Row Width Adjustable . . . . . . . . . . . . . . . . . . Yes for most row spacings Wing Leveling Adjustment . . . . . . . . . . . . . . Easy-adjust turnbuckle with bearing 5-bolt 21×5.25×9 laminated or 26×9×14.5-24 PR Severe-duty Ag Tire ‘’Ground Control’’ suspension with air springs and shock absorbers on all 4 wheel standards for better durability of axles and axle-to-frame interface Yes for most row spacings Easy-adjust turnbuckle with bearing Shielding: Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chain, double-row chain, or rubber protected behind front frame Chain, double-row chain, or rubber protected behind front frame Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chain, double-row chain, or rubber Gearcase Warranty . . . . . . . . . . . . . . . . . . . . 3 years Chain, double-row chain, or rubber 3 years * Splined profiles telescope easier under load and provide longer life. 132 C&CE P URCHASING G UIDE 2008
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Modify Date : 2008:04:14 10:29:20-05:00 Create Date : 2008:04:11 09:53:24-05:00 Metadata Date : 2008:04:14 10:29:20-05:00 Creator Tool : Adobe InDesign CS3 (5.0.1) Format : application/pdf Title : 08-2526 Creator : terriolson Document ID : uuid:70ab0fa9-d2cf-ec44-8920-c52e558cde07 Instance ID : uuid:dfd8c015-6687-024b-9873-82d974978e97 Producer : Acrobat Distiller 8.1.0 (Macintosh) Has XFA : No Page Count : 3 Author : terriolsonEXIF Metadata provided by EXIF.tools