Johnson Controls KONOZW KONOzw Smart Hub Thermostat User Manual

Johnson Controls, Inc. KONOzw Smart Hub Thermostat

User Manual

Download: Johnson Controls KONOZW KONOzw Smart Hub Thermostat User Manual
Mirror Download [FCC.gov]Johnson Controls KONOZW KONOzw Smart Hub Thermostat User Manual
Document ID4110702
Application IDT15qd3g1HFnAPQx/2ZezaQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize60.06kB (750693 bits)
Date Submitted2018-12-19 00:00:00
Date Available2018-12-19 00:00:00
Creation Date2018-11-19 12:42:40
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-11-22 09:29:51
Document TitleUser Manual
Document CreatorAdobe InDesign CC 13.1 (Macintosh)

™
Smart Hub
THERMOSTAT
Installation Manual
Thank you for inviting KONOzw™ into your home. The setup process
is easy. All you need to do is follow these simple steps and you’ll
be on your way to saving energy and making your home even more
comfortable.
LUX Products offers installation and product videos
Please visit LuxProducts.com/videos or visit our YouTube channel
LUX Products Corporation.
Note: To contact LUX Technical Support, please call 856.234.8803.
Para ver estas instrucciones en español, por favor visite.
LuxProducts.com/KONOzwManual
1. START HERE
What’s in the box?
KONOzw
Trim Plate
Wiring Labels
Screws
Wall Anchors
Batteries
Phillips Screwdriver
Optional: Wire Stripper
Tools Needed
Drill
Smart Hub
Table of Contents
1. Start Here.......................................................................................2-5
2. Installing KONOzw........................................................................6-10
3. Operating KONOzw ....................................................................11-16
4. Appendix....................................................................................17-19
LuxProducts.com | 3
This manual is a comprehensive guide for the installation and wiring
of your KONOzw thermostat.
Step 1.1: Turn off the power at the circuit breaker to both
your heating and cooling systems before performing any
wiring.
STOP
Step 1.2: Confirm that your heating
and cooling system is powered down by changing the
temperature on your existing thermostat. The heating
and cooling should not come on but may show the
temperature change on your existing thermostat.
Note: Your system should not make any noise and you
should not feel any air exiting your vents.
Step 1.3: Remove the front of your old thermostat
from its base.
HIGH
If you see thick black wires, wire nuts, or any
VOLTAGE
labels that say 120-240VAC or High Voltage, your
system is not compatible with KONOzw. Please call
LUX Technical Support at 856.234.8803 before proceeding with your
installation. If you do not see any high voltage labels or wires, you may
continue with the installation process.
4 | 856.234.8803
1. START HERE
Step 1.4: Take a picture of your current wiring layout. The picture can
be used as reference later.
Step 1.5: Use the included wire labels to mark which wire is connected
to each terminal in your old thermostat.
Note: Wiring letter designations correspond to either a “Heat Pump” or
“Conventional” system.
Note: A wiring compatability tool is available at
LuxProducts.com/wiring
LuxProducts.com | 5
Wiring
Step 2.1: Identify your system configuration (see wiring diagrams in
appendix). Potential configurations include:
System Configuration
Wiring Configuration
Conventional: 1H/1C without C-wire
Y, G, W1, R
Conventional: 1H/1C with C-wire
Y, G, W1, R, C
Conventional: 2H/1C without C-wire
Y, G, W1, W2, R
Conventional: 2H/1C with C-wire
Y, G, W1, W2, R, C
System Configuration
Wiring Configuration
Heat Pump: 1H/1C with C-wire
Y, G, R, O/B, C
Heat Pump with auxiliary or dual fuel:
Y, G, R, O/B, W1, C
If you have only one R wire, please use the RH terminal. If you have
a different configuration other than what is listed above, please call
Technical Support for help with your installation. If you have a “C” wire
then the included batteries are not needed.
Note: If you do not have a C-wire but would rather not use replaceable
batteries, please visit shop.LuxProducts.com/PowerBridge to learn more
about our Lux Power Bridge solution.
6 | 856.234.8803
INSTALLATION
2. WIRING
Step 2.2: Verify that each wire has been properly labeled and remove
each wire from its terminal — make sure that they don’t fall into the
wall.
Step 2.3: Remove the mounting screws from the base of the old
thermostat and remove the base from the wall.
Step 2.4: Separate KONOzw from its base.
Step 2.4
Step 2.5: If you would like to use the trim
plate or wall anchors, you may install them
now.
Step 2.6: Pull the wires from your wall
through the center hole of the KONOzw
base. Secure the base to the wall using the
included mounting hardware. Follow the
built in level to ensure that it is straight.
Step 2.5
Step 2.6
LuxProducts.com | 7
Option 1 - Conventional (furnace) Systems:
Step 2.7f: Follow the terminal labels
marked “Conventional” on the thermostat
base. Press the lever and insert each
labeled wire into the top hole of the
corresponding terminal.
CONVENTIONAL
HEAT PUMP
POWER BRIDGE
C Y1 W2
C Y1 O/B
Step 2.8f: If you have both an RC and RH wire present, then remove the
red cap next to the reset button. You can now proceed to step 2.9.
Option 2 - Heat Pump Systems:
Step 2.7hp: Follow the terminal labels
C Y1 W2
marked “Heat Pump” on the thermostat base. CONVENTIONAL
HEAT PUMP
C Y1 O/B
POWER
BRIDGE
Referencing your wiring photo, press the
lever and insert each labeled wire into the top
hole of the corresponding terminal.
If your old thermostat did not have a W1 wire but did have a W2 wire,
insert the W2 wire into the W1 terminal.
Step 2.8hp: If you have both an O wire and a B wire
(i.e. in a Trane system), install the B wire in the “C” terminal.
For more detailed directions, please see the wiring diagrams in the
appendix or call Technical Support.
8 | 856.234.8803
INSTALLATION
2. WIRING
Wiring
Step 2.9: If you do not have a C-wire, insert the
(4) AA batteries included with your KONOzw
thermostat according to their correct polarization
markings found on the KONOzw.
Securely fasten KONOzw onto its base. Once it has
clicked into place, return power to your heating
and cooling system.
Note: If batteries are installed, you must replace all batteries with only
premium brand alkaline batteries at least once every two years.
To replace the batteries, remove the KONOzw from it’s base (ie
disconnecting it from its supply mains) and insert (4) AA premium
brand alkaline batteries. If you discover leaky or damaged batteries, do
not touch the batteries. Leaky or damaged batteries must be handled
with proper safety equipment included safety glasses with side shields,
and neoprene or natural rubber gloves in a well-ventilated room.
For disposal of batteries, abide by the local laws and regulations of your
region. If you are not able to identify the applicable rules in your area,
please check the instructions of the battery manufacturer.
For disposal of KONOzw, you must remove batteries prior to disposal.
LuxProducts.com | 9
Step 2.10: Your KONOzw is now ready to be configured for your heating
and cooling system. The KONOzw will guide you through the initial
system configuration. Use the knob to change options and press the
knob to confirm your selection.
First you will need to set your system type:
(F) for Furnace or Boiler:
Set the fan type to Gas (most
common), Electric (for systems
without gas or oil), or Boiler (no
fan).
(HP) for Heat Pump:
Set the valve type to O or B - look
at the photo of your wiring to see
your valve type.
Step 2.11: After confirming your system settings, KONOzw
will ask if you would like to connect to a Smart Hub. Select “ADD”
to establish a connection with your Smart Hub or select “OFF” to
connect later. For details on how to configure KONOzw for your
particular Smart Hub please visit: LuxProducts.com/KONOzwManual
10 | 856.234.8803
OPERATIONS GUIDE
3. OPERATIONS
Press the knob when the thermostat is idle to
viewthe
the
menu.
Rotate
the isknob
select
an
Press
knob
when the
thermostat
idle toto
view
the menu.
option
and
press
again
to
confirm.
Rotate the knob to select an option and press again to confirm.
System Mode
Installation
Settings
Fan Mode
Smart Hub
Network
Connection
Run Schedule *
System
Preparing
For more information about
please visit
Changing KONOzw’s
Décor-snap™
Cover
installation
settings,
Place right hang on outside edge of
the Décor-snap cover and left hang on
the edge of the KONOzw screen. Hold
KONOzw in place while gently pulling the
decor snap cover. You will find important
information for Smart Hub setup
including the Z-wave and model number.
LuxProducts.com/KONOmanual
*Note: Run Schedule will only work if
enabled on Smart Hub.
LuxProducts.com | 11
The operations guide section covers the following:
• 3.1 How to use KONOzw
• 3.2 Reading KONOzw’s screen
• 3.3 Using KONOzw throughout the year
3.1 How to use KONOzw
KONOzw’s knob is the main way for you to control your heating and
cooling systems. Simply press the knob to open a menu or select an
option. Press and hold the knob at any time to exit a menu and return
to the home screen. In a menu, rotate the knob to cycle through
available options.
Note: If you are interested in
advanced information, the
Installation Setting Guide can
be found at
LuxProducts.com/KONOzwManual
12 | 856.234.8803
OPERATIONS GUIDE
3. OPERATIONS
3.2 Reading KONOzw’s screen
The large number in
the top left shows
your ambient room
temperature.
The small number in the
bottom right shows your
set temperature.
The selected system
mode (HEAT, COOL or
OFF) is shown to the right
of the ambient room
temperature.
The active fan status
is shown by the icon
below the ambient
room temperature. If
it is off, your fan is not
running. If it is on, your
fan is running. Please
note that your fan will
run depending on your
selected fan mode (either
AUTO or ON).
If you see ON under
your system mode, it
means that your system
is actively heating or
cooling your home.
This icon indicates the
battery levels of the
KONOzw.
This icon shows that
your HVAC system is
preparing to turn on
or off. Please wait for
heating and cooling
to start.
Note: Replace all four AA
batteries in the KONOzw
if the low battery icon or
blinking empty battery icon
appears on your KONOzw.
LuxProducts.com | 13
Reading KONOzw’s screen
This icon opens the
system mode menu.
In this menu, you can
set your HVAC system
to OFF, HEAT, or COOL.
Your thermostat will
automatically detect
which modes are
available when you install
your thermostat, so you
may not see all three
options depending on
your system type.
14 | 856.234.8803
This icon opens the
fan mode menu. In
this menu, you can set
your fan to AUTO, or
ON. AUTO will run your
fan when your system
is actively heating or
cooling. ON will run your
fan continuously. If you
set a filter life value in
the installation settings,
you’ll be able to check
the remaining life of your
filter in the fan settings
menu.
This icon opens the
installation settings
menu. In this menu, you
can adjust advanced
preferences for special
applications. Select the
gear icon, then after IS
appears on the screen,
select YES to begin the
installation settings flow.
For more information
about the installation
settings, please view the
“Installation Settings
Guide”.
OPERATIONS GUIDE
3. OPERATIONS
This icon opens the Smart Hub network
connection menu. In this menu, you can choose
to connect or disconnect from your Smart Hub.
Select “SET” to establish a new Smart Hub
connection. Select “OFF” to temporarily disable
the connection. Lastly, select “ON” to reconnect
to your Smart Hub. For more information
about connecting to a Smart Hub, please view
KONOzw’s Smart Hub Setup Guide.
3.3 Using KONOzw throughout the year
Cold Weather:
Heat mode is the best setting to use when it’s
cold out and you won’t need to use your air
conditioner. This will make sure that your air
conditioner stays idle and that your heater
keeps your home’s temperature above your
chosen set-temperature.
Hot Weather:
Cool mode is the best setting to use when it’s
hot out and you won’t need to use your heating
system. This will make sure that your heater
stays idle and that your air conditioner keeps
your home’s temperature below your chosen
set-temperature.
LuxProducts.com | 15
Congratulations!
Installation is complete and your KONOzw is ready to go. Now let’s save
some energy and make your home more comfortable.
Personalize your KONOzw
It’s more than a thermostat, it’s décor! Match KONOzw to your style by
simply changing the Décor-snap cover. Check out our wide variety of
designer colors and finishes at LuxProducts.com/ShopCovers
Hibiscus
Red
Sea
Green
Deep
Blue
Midnight
Black
True
White
Sky
Blue
Sea Mist
Grey
Champagne
Gold
Driftwood
Paint
It
16 | 856.234.8803
4. APPENDIX
Conventional System
Fan
RC
RC
Conventional
Heat Pump
Power Bridge
Heat (Stage 1)
Heat (Stage 2)
Cool
Y1 W2 W1 RH
Y1 O/B W1 RH
Conventional
Heat Pump
Power Bridge
Transformer
Furnace
Thermostat
Notes:
• C-wire optional
• The W2 terminal is used for 2 stage heating
• If you have both an RH and RC wire, please remove the red cap from the back of
the thermostat
LuxProducts.com | 17
Heat Pump System
Fan
RC
RC
Conventional
Heat Pump
Power Bridge
AUX/Emer Heat
Changeover Valve
Compressor
Y1 W2 W1 RH
Y1 O/B W1 RH
Conventional
Heat Pump
Power Bridge
Transformer
Heat Pump
Thermostat
Notes:
• C-wire optional
• The W1 terminal is used for Auxiliary/Emergency heat or on Dual Fuel systems
18 | 856.234.8803
Technical Information:
Disconnection Means: Type 1B
Pollution Degree: 2
Impulse Voltage: 330V
Automatic Action: 100,000 cycles
Electrical Rating:
-Input: 24V a.c. 60Hz or 4xAA Alkaline battery
-Output: @24V a.c. Max. 1.5A
FCC Part 15C
4. APPENDIX
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. FCC RF Radiation Exposure Statement
Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the unit at least 20cm from nearby
persons.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device
may not cause interference. 2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
LuxProducts.com | 19
Philadelphia, PA 19112 USA
LuxProducts.com
Designed in Philadelphia.
54074

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:11:19 12:42:40-05:00
Creator                         : Adobe InDesign CC 13.1 (Macintosh)
Modify Date                     : 2018:11:22 09:29:51-05:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 91.163280, 2018/06/22-11:31:03
Metadata Date                   : 2018:11:22 09:29:51-05:00
Creator Tool                    : Adobe InDesign CC 13.1 (Macintosh)
Instance ID                     : uuid:cc415899-51fa-4a7f-8637-4fba90d24d29
Original Document ID            : xmp.did:263810da-9fb5-4437-80a8-f50c4334fb53
Document ID                     : xmp.id:09d7ecf6-2ee2-41bb-9dc2-0c26fcc9d786
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4d2510bb-aebd-4613-af2f-6b232756d235
Derived From Document ID        : xmp.did:5f94addf-ec14-4297-a75d-6ffb029596f3
Derived From Original Document ID: xmp.did:263810da-9fb5-4437-80a8-f50c4334fb53
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Macintosh)
History Changed                 : /
History When                    : 2018:11:19 12:42:40-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 20
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RNL-KONOZW

Navigation menu