Jujo Electronics 8018 USB Stick Type R/W User Manual

Shanghai Jujo Electronics Co., Ltd. USB Stick Type R/W

Users Manual

Download: Jujo Electronics 8018 USB Stick Type R/W User Manual
Mirror Download [FCC.gov]Jujo Electronics 8018 USB Stick Type R/W User Manual
Document ID532518
Application IDScTVVtFxMzHG7404HvV1+Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize19.13kB (239126 bits)
Date Submitted2005-04-14 00:00:00
Date Available2005-04-13 00:00:00
Creation Date2005-04-14 10:32:07
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-04-14 10:32:07
Document TitleMicrosoft Word - user manual .doc
Document CreatorPScript5.dll Version 5.2
Document Author: Agnes Fu

USB Stick Type R/W
User Manual
Jujo Electronics Corporation
Version 2.0
All Rights Reserved
Page
USER MANUAL ............................................................................................1
1. PRODUCT FEATURES................................................................ 3
2. OPERATING ENVIRONMENT.................................................. 5
2.1 MINIMUM SYSTEM REQUIREMENTS .........................................................5
2.2 SUPPORTING OPERATING SYSTEM ...........................................................5
2.3 NECESSARY SUPPORTS OF USB HOST CONTROLLER ..............................5
3. INSTALLATION OF THE DRIVERS......................................... 6
3.1 INSTALLATION IN WINDOWS98 SE.........................................................6
3.2 INSTALLATION IN WINDOWS2000 PRO ...................................................8
3.3 OTHERS ................................................................................................11
4. TROUBLESHOOTING .............................................................. 12
5. INSTALLATION OF SIM CARD AND NOTES ...................... 13
5.1
DIAGRAM OF USB
STICK TYPE R/W ................................................13
5.2
INSTALLATION OF SIM CARD ............................................................13
5.3
TAKING OUT OF SIM CARD ................................................................14
5.4
OTHERS:.........................................................................................15
FCC-B Radio Frequency Interference Statement
FCC ID: PIT-8018
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Instruction Manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
1. Product Features
USB Stick Type R/W is a novel, small smart SIM Card Reader. It not only provides
an economic, universal and safe interface for Smart Card and PC users, but also
boasts such features as easy-to-use (Plug and Play), fast transmission speed,
small and serviceable. USB Stick Type R/W will be widely used in such areas as
e-commerce.
Main Features:
◎ Fully compatible with USB1.1;
◎ In line with ISO7816;
◎ Up to the requirements of Microsoft WHQL USB Smart Card Reader;
◎ With WDM drivers, can be unfailingly used in various operating systems;
◎ Small in dimension and convenience in carrying (dimension:Height 8.2mm, Length
58.2mm, Width 17.3mm);
◎ Fast transmission speed(low speed 1.5M/s,full speed:12M/s)。
Note:* WHQL is Windows Hardware Quality Labs
* WDM is Windows Driver Model
2. Operating Environment
2.1 Minimum system requirements
◎ PC/AT or compatible PC (desktop computer or Notebook PC) with USB interface;
◎ CPU: Pentium® 100MHz,200MHz or higher is recommended;
◎ RAM: 32Mbyte,64Mbyte is recommended;
◎ Hard Disk: 20Mbyte free hard disk space or more;
2.2 Supporting Operating System
Supports the following Windows operating environment:
◎ Windows 98
◎ Windows 98 Second Edition
◎ Windows Millennium Edition
◎ Windows 2000 Professional (SP1, SP2)
◎ Windows 2000 Server
◎ Windows XP Home Edition
◎ Windows XP Professional
2.3 Necessary supports of USB Host Controller
Your computer should have:
◎ UHCI
Universal Hub Controller Interface
◎ OHCI
Open Host Controller Interface
3. Installation of the drivers
It is strongly recommended that you close any application before installing the software. The
following are the installation in Windows98 and Windows2000 Professional.
3.1 Installation in Windows98 SE (ME)
1、 Turn on the power supply to your PC and make sure the computer has connected to
internet. Download the drivers for USB Stick Type R/W from
http://jujo-electronics.com/downloads/.
2、Store the downloaded file in your computer, as:C:\desktop\
3、Double-click the setup.exe and setup,click Next and continue the installation;
4、When the following appears, click Browse and select a folder you like to install the USB
Stick Type R/W Ver2.2, or click Next to use the destination folder.
Click Next to begin copying files;
5、When complete, click Finish,the computer will automatically restart;
6、After restarting,insert USB Stick Type R/W. When the computer found the hardware,
you can see [Smart Card Reader] in Device Manager;the following means the
installation has been successfully completed;
3.2 Installation in Windows2000 Pro(XP)
1、Turn on the supply to the PC and make sure the computer has connected to Internet.
Download
the
drivers
for
USB
Stick
Type
R/W
from
http://jujo-electronics.com/downloads/.
2、Store the downloaded file in some place in your computer,as:C:\desktop\
3、Double-click the setup.exe and beging to install the Setup,click Next to continue;
4、When the following appears, click Browse to select a destination folder,or just click
Next to use the following folder。
Click Next to start copying files;
5、After completing the installation, select [Yes, I want to restart my computer now] to
restart your computer,if you don’t want to restart now, you can select [No, I want to
restart my computer later];
6、After restarting,insert USB Stick Type R/W, the computer will find the new hardware (as
the following);
After a while, the prompt [Digital Signature Not Found] will appear,choose [yes] to
continue the installation;
10
7、After completing the installation, you will see [Smart Card Reader] in Device Manager;
the following means the installation has been successfully completed;
3.3 Others
1、For the installation in other Windows98 SE versions and Windows ME,refers to the
installation in Windows98;
2、 For the installation in Windows2000 Pro and Windows XP,refers to the installation in
Windows2000 Pro.
3、How to remove:first make sure the USB Stick Type R/W has been taken out,choose
“Add/Remove Application” in Control Panel,find USB Stick Type R/W in the menu, choose
“Remove”。
11
4. Troubleshooting
The following table lists the problems that you may encounter and their
solutions.
Problem
Why can’t you see the
USB device in “Device
Manager”?
Cause
You probably disabled the
Plug&Play in BIOS.
Why
doesn’t
my
operating system support
USB interface?
You may use Windows95
or Windows 3.1 ; or
Windows NT。
Why can’t my card reader
work properly suddenly?
You may delete or damage
the installed drivers by
accident.
Why is there a yellow
question
mark
or
excalmatory mark before
my USB SIM Card
Reader
in
“Device
Manager”?
It shows that the USB
device
can’t
work
probably , you may has not
installed the drivers.
12
Solution
Restart your computer and press “Del” to
enter BOIS ,
select “PnP / PCI
Configuration” menu and carefully chect
every item to make sure that “PnP Os
Installed” is “Yes” ( enable the Plug and
Play ), change “Assign IRQ For USB”
into“Enable”。
Such systems don’t support USB
interface, you should upgrade your
operating system to Windows98 or
higher Windows operating system。
Reinstall the drivers.
Install the drivers.
5. Installation of SIM card and
Notes
5.1 Diagram of USB Stick Type R/W
SIM card
Rope Hole
SIM card
USB Plug-in
Pin Hole
Faucet
Figure 1
5.2 Installation of SIM Card
(1) Planform:
Installation:hold the front of the SIM Card (with gap up),slightly insert the SIM card.
Make sure the SIM card should be fully inserted into the base to be fully engaged with it.
SIM Card
correct installation
base
Figure 2
The following is a false installation:
Figure 3
13
(2) Lateral view:
Base
SIM 卡
Figure 4
(3)SIM Card should be fully engaged with the base:
Not fully inserted
into SIM card base
Not fully inserted
into SIM card base
Correctly inserted
Figure 5
5.3
Taking out of SIM Card
Taking out:insert a pin into the base and slightly push the SIM card out(as Figure 6).
Pin
Figure 6
14
5.4 Others:
Don’t touch the SIM Card
Keep away from magnetic
body
Figure 7
15
Keep the temperature
between 10 and 60°C

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 15
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:179ca103-c12d-433c-aa59-94ba11e5c085
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:04:14 10:32:07-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:04:14 10:32:07-07:00
Document ID                     : uuid:fd7b5e4f-03fe-4bc6-8770-13614539112f
Format                          : application/pdf
Title                           : Microsoft Word - user manual .doc
Creator                         : Agnes Fu
Author                          : Agnes Fu
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PIT-8018

Navigation menu