Junlan Electronic CAB-B3602 The Edison Bluetooth Vintage speaker User Manual

Shenzhen Junlan Electronic Ltd The Edison Bluetooth Vintage speaker

User manual

The Edison Bluetooth Vintage speaker MODEL: BGR-2/0163, CAB-B3602 USER MANUALPLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THISUNIT AND RETAIN IT FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONSWhen used in the directed manner, this unit has been designed and manufactured toensure your personal safety. However, improper use can result in potential electricalshock or fire hazards. Please read all safety and operating instructions carefully beforeinstallation and use, and keep these instructions handy for future reference. Take specialnote of all warnings listed in these instructions and on the unit.1. Read these instructions – All the safety and operating instructions should be readbefore the appliance is operated.2. Keep these instructions – The safety and operating instructions should be kept forfuture reference.3. Heed all warnings – All warnings on the appliance and in the operating instructionsshould be adhered to.4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water;for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,or near a swimming pool.6. Clean only with dry cloth – The appliance should be cleaned only as recommendedby the manufacturer.7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions. The appliance should be situated so that its location or position does notinterfere with its proper ventilation. For example, the appliance should not besituated on a bed, sofa, rug, or similar surface that may block the ventilationopenings; or placed in a built-in installation, such as a bookcase or cabinet that mayimpede the flow of air through the ventilation openings.8. Do not install near any heat sources such as radiators, heat registers, stoves, orother apparatus (including amplifiers) that produce heat.9. AC adaptor is used as disconnect device and it should remain readily operableduring intended use. In order to disconnect the apparatus from the mains completely,the AC adaptor should be disconnected form the mains socket outlet completely.10. Only use attachments / accessories specified by the manufacturer.11. Use only with a cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, usecaution when moving the cart/apparatus combination to avoid injuryfrom tip-over.12. Unplug this apparatus during lightning storms or when unused for long periods oftime.13. Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.14. This appliance shall not be exposed to dripping or splashing water and that no objectfilled with liquids such as vases shall be placed on the apparatus.15. Power Sources – The appliance should be connected to a power supply only of thetype described in the operating instructions or as marked on the appliance. Do notoverload wall outlet.16. Battery shall not be exposed to excessive heat such as sunshine, fire or the like17. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs,seek advice from your local qualified service technician or contact the distributor viathe telephone number at the back of this instruction manual.18. Caution marking and nameplate are located on bottom or back of product.2
FCC WARNINGS:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.RF Exposure StatementTo maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.ACCESSORIES1 x AC Adaptor1 x User Manual1 x Main Unit1 x Horn1 x Horn Connecting and Decorating Ring3
STEP 2: Follow the shown method to match the gap between the ring 1 and ring 2.STEP 3: Swivel the horn and the horn rod by reverse direction until they fix each otherfirmly.INSTALLATIONSTEP 1: Insert the connecting and decorating ring into the horn rod.4
PRODUCT OVERVIEWLINE IN OPERATIONThis unit provides an auxiliary audio input jack for connecting external audio devices likeMP3 players and listen through the speakers of this unit.1. Use an audio cable with one 3.5 mm stereo plug on each end.2. Plug one end into the LINE IN jack on the rear of the unit and the other end of the cableinto the LINE OUT, AUDIO OUT Jack or Headphone Jack of your external audio device.The Indicator LED will turn RED.3. Turn on the external audio device and the unit.4. Operate all other functions on the auxiliary device as usual.Note: The Bluetooth function will be cut off when a 3.5 mm stereo LINE IN cable pluggedinto the LINE IN jack.5
BLUETOOTH OPERATION1. Push the power switch to ON position to turn on the unit, the Indicator LED will flashBLUE. The unit is now ready to pair with your Bluetooth enabled device.2. Turn on the Bluetooth function of your Bluetooth enabled device and search to findthe pairing name “CAB-B3602”.3. Select "CAB-B3602" when it appears on your device screen.4. After successfully pairing, the Indicator LED stops flashing and a tone sounds. Youcan now play music from Bluetooth enabled device.Note: If you want to connect the unit to another device after pairing successfully, pleaseturn off the Bluetooth on the paired device first if it is in range before goingthrough the above steps. Otherwise, the unit will automatically reconnect to thepreviously ed device.5. Operate all other functions on the external Bluetooth enabled device as usual.6. To turn off the unit, push the power switch to OFF position.CARE AND MAINTENANCE1. Do not subject the unit to excessive force, shock, dust or extreme temperature.2. Do not tamper the internal components of the unit.3. Clean your unit with a dry cloth. Solvent or detergent should never be used.4. Avoid leaving the unit in direct sunlight or in hot, humid or dusty places.CLEANING THE UNITTo prevent fire or shock hazard, disconnect your unit from the AC power source whencleaning.If the cabinet or the outer surface becomes dusty, wipe it with a soft dry dust cloth. Donot use any wax or polish oil.If the front panel becomes dirty or smudged with fingerprints it may be cleaned with asoft cloth slightly dampened with a mild soap and water solution. Never use abrasivecloths or polishes, as these will damage the finish of the unit.CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.6thepair
TROUBLESOOTING GUIDEPlease refer to the following possible solutions before inquiring for service.SPECIFICATIONSPower source...............................................AC-DC Adaptor DC 5V 2000mABluetooth Version..........................................................................................................V2.1Bluetooth Working Range........................................about 32feet(10m) tested in open areaThe Bluetooth® word mark and logos are registered trademarks owned byBluetooth SIG, Inc. and any use of such marks by Spectra Merchandising Intl,Inc. is under license. Other trademarks and trade names are those of theirrespective owners.7Symptom Possible Problem SolutionThe unit does notrespond (no power)The unit is disconnected fromthe AC outlet. Reconnect to the AC outlet.No power from the AC outlet. Try the unit on anotheroutlet.Unit is ON but thereis low or no volumeThe volume control has beenturned all the waydown.Increase Volume onexternal device.No SoundBluetooth speaker is notpaired.Go through “BluetoothOperations” process toconnect the speakers.Speaker placement out ofBluetooth working rangeRelocate the speakerwithin Bluetooth operatingrangeSound is distorted Volume level is set too high. Decrease the volume onexternal device.

Navigation menu