Junlan Electronic CAB0116 Bluetooth speaker User Manual Manual

Shenzhen Junlan Electronic Ltd Bluetooth speaker Manual

User manaul

Portable Bluetooth® SpeakerHot Joe IIuser’s manualmodel #: PWS022014.10.23 17:04:45+08'00'
What’s IncludedPage 2 Page 3 Micro USB CableThank you for purchasing Hot Joe II [PWS02].Portable Bluetooth® SpeakerFeatures• Bluetooth 2.1 + A2DP, AVRCP• Hands-free speakerphone• Wireless range of up to 30 feet• Stereo speakers with RealBass technology• Easy USB charging• Rechargeable Lithium Battery • 3.5 mm auxilary input jackUnpack the Hot Joe II and make sure all accessories are put aside so they will not be lost.Portable SpeakerThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.hello.2014.10.2317:04:55+08'00'
Page 5 Safety InformationContentsPage 4 IntroductionWhat’s IncludedSafety InformationGetting Started Location of Main Unit Controls Operational Instructions Charging the Unit Power Up Aux Input Pairing Your Bluetooth Device Music Playback Functions Hands-free Speakerphone TroubleshootingCompliance with FCC RegulationsWarranty InformationSpecifications23 5 7 888991011121315Important Safety Instructions1. ATTACHMENTS - Do not use attachments not recommended by the manufacturer.2. WATER AND MOISTURE - The Hot Joe II should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.3. VENTILATION - The Hot Joe II should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.4. OBJECTS AND LIQUID ENTRY - Care should be taken so that external objects do not fall into and liquids are not spilled onto any openings or vents located on the product.5. POWER SOURCE - The Hot Joe II should be connected only to a power supply of the type described in the operating instructions or as marked on the Hot Joe II. If you are not sure, please consult the dealer or local power company.Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the Hot Joe II.2014.10.2317:05:01+08'00'
Page 6 Getting StartedLocation of Main Unit Controls1. LED indicators2. Speakers3. Hands-free / Power button4. Previous song / Next song 5. Volume - / Volume +6. Power ON/OFF switch7. Micro USB charger8. 3.5 mm AUX inputPage 7 Safety Information6. HEAT - The Hot Joe II should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.7. SERVICING - The user should not attempt to service the Hot Joe II beyond those methods described in the user’s manual. Opening or removing covers will expose you to dangerous voltage and other hazards. Service methods not covered in the user’s manual should be referred to qualified service personnel.174262835AUX IN2014.10.2317:05:08+08'00'
Operational InstructionsPage 9 Page 8 Operational InstructionsAUX InputCharging the UnitPower UpPairing Your Bluetooth DeviceMusic Playback Functions1. To Playback your music via the AUX IN port, plug a standard stereo headphone cable (3.5mm, not included) from your audio device to Hot Joe II and begin playback on your audio device.2. To increase or decrease the volume, press VOL + and VOL – buttons.Note: - The Skip/Hands-free button do not work with external devices. - The AUX input source will be automatically selected when the auxiliary cable is connected. - Once the auxiliary cable is disconnected, the unit will switch back to Bluetooth mode.1. Charge your Unit through any Micro USB Jack or wall charger.2. The LED indicator will turn red while charging.3. Once the battery is fully charged the red indicator will turn off.Note: - Please charge the battery up to 4 hours before initial use.1. Slide the switch on the back of the speaker to the ON position.2. Press and hold the power button until you hear a sound indicating the unit is ON and in Bluetooth pairing mode. The LED indicator will turn blue and will be blinking.3. To Power down your speaker, slide the button in the back of the unit to OFF position. 1. Turn the unit ON on the unit. The Hot Joe II will beep and the indicator will turn blue and will flash indicating the unit is in pairing mode. 2. Navigate to the Bluetooth menu on your device and begin searching for the available devices.3. Select PWS02 from the list of results, and your device will begin to pair. If the unit asks for a code, please enter “0000”.4. Once connected the speaker will beep and the blue indicator will stop flashing.• Press the Power button to Play and Pause the music.• Press the Skip Buttons to skip to Next or Previous Song.• Press the Vol+ or Vol - buttons to increase or decrease the volume.• Press and hold the Power button to turn the unit to Standby mode.2014.10.2317:05:14+08'00'
TroubleshootingPage 10 Operational InstructionsSymptomNo powerHands-free not workingNo soundSolutionRaise the volume by pressing the VOL + button.Make sure your device is connected to the speaker and playing music.Raise the volume level of the connected device.Set input source as AUX IN or Bluetooth mode.Recharge the battery.Move the power switch to ON position.Set to Bluetooth mode (Hands-free function is only available in Bluetooth mode)Placing a Call • To place a call simply initiate the call from your Bluetooth connected phone and the call will automatically be routed through your paired Hot Joe II and the music will be stopped.• When the call is terminated, the current music will be resumed. The call can also be terminated by pressing the Hands-free button.Receiving a Call • Press the Hands-free button to answer the call on your speaker.• Press and hold the Hands-free button to reject the call.• To disconnect press the Hands-free button again.Page 11 Hands-free Speakerphone2014.10.2317:05:19+08'00'
Warranty InformationPage 13 Compliance with FCC RegulationsPage 12 The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada.Concept 101 LLC warrants to the original purchaser that the product will be free from defects in material, parts and workmanship for the period designated for this product. The warranty commences the day the product is purchased and covers up to a period of one (1) year (90 days of labor and 1 year parts). Concept 101 LLC agrees that it will, at its option, replace the defective product with either a new or remanufactured speaker equivalent to your original purchase during the warranty period. Should the Parts warranty period exceed the Labor warranty period, Concept 101 LLC will supply at no charge for the remainder of the Parts warranty, any new or remanufactured replacement parts as required by the product. During this period all labor and service charges will become the responsibility of the customer.Exclusions: This warranty does not apply to the appearance or exterior of the product which may have been damaged or defaced, altered or modified in design or construction. This warranty does not apply if the serial number is altered or removed, or if there is any damage due to power line surge, user damage to the AC power cord, connection to improper voltage source, general misuse, accidents, or repair attempts by unauthorized service agents. Other exclusions include ear pads, rechargeable and non-rechargeable batteries.REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER; Concept 101 LLC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE WARRANTY. Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate Radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to Radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to Radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from which the receiver is connected.- Consult the dealer or an experienced Radio/television technician for assistance.This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20 cm separation distance will be maintained between the device (excluding its handset) and users.THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKERS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.Caution!If at any time in the future you should need to dispose of this product, please note that waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. 2014.10.2317:05:25+08'00'This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
SpecificationsPage 15 Page 14 Warranty Information- Bluetooth 2.1- Bluetooth compatibility: Bluetooth 2.0 or above device with A2DP/AVRCP- Playing time: Up to 4 hours- Charging time: 3 to 4 hours- Impedance: 4 £- Working distance: Up to 30 ftObtaining Service: To obtain service, product literature, supplies or accessories please call 1 888-920-8680, or visit our website, www.att.com/electronics, to create a ticket for exchange/repair. Please make sure to provide the date of purchase, model number and a brief description of the problem. Our customer service representative will contact you or send detailed return instructions.Concept 101 LLC does not warrant that the Hot Joe II will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. Concept 101 LLC has made every effort to ensure that this user’s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change without notice and does not represent a commitment on the part of Concept 101 LLC. Concept 101 LLC reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice. If you find information in this manual that is incorrect, misleading, or incomplete, please contact us through our website.2014.10.2317:05:31+08'00'
©2014 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 2.0 AT&T 10/2014.www.att.com/electronics2014.10.2317:05:36+08'00'

Navigation menu