Junlan Electronic CAB0631 Bluetooth Speaker User Manual

Shenzhen Junlan Electronic Ltd Bluetooth Speaker

User manual

Plug the included AC/DC power adapter into the DC POWER INPUT on the unit and an AC power outlet to power the unit.Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.•  The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus.L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.•  Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.•  Battery shall not be exposed to excessive heat such as sunshine, re or the like.Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable.•  Caution marking is located at the rear or bottom of the apparatus.Attention marquage est situé sur le paneau arrière ou inférieur de l’unité.•  The marking information is located at the rear or bottom of apparatus.Le marquage est situé sur le paneau arrière ou inférieur de l’unité.1.  Read these Instructions.2.  Keep these Instructions.3.  Heed all Warnings.4.  Follow all instructions.5.  Do not use this apparatus near water.6.  Clean only with a dry cloth.7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9.  Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specied by the manufacturer.12.  Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.13.  Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.• WARNING:To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.• AverTIssemeNT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.• CAUTION: Use of controls or adjustments or performance of procedures other than those specied may result in hazardous radiation exposure.• WArNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• WArNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside.  We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.• WArNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any uorescent lighting, as it may be the cause.• CAUTION:Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.• PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.• WArNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.• WArNING: The remote control’s button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste• WARNING:Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.• WArNING: Shock hazard - Do Not Open.• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIRMains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur est utilisé pour déconnecter le système.La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.Do not mix old and new batteries.Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.No mezcle baterías viejas y nuevas.No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).WArNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.ATTENTIONRISQUE D' ÉLECTROCUTIONNE PAS OUVRIRCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.IMPORTANT SAFETY INSTRUCTIONSIntroduction and SetupFCC WarningsPowerAdditional WarningsWARNINGS AND PRECAUTIONSFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com  Customer Service: 1-888-999-4215Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.comCopyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.USER’S GUIDEV: 774-01ISB563B Bluephoria Wireless Bluetooth SpeakerLine InUSB PortUse to charge external connected devices.(Rating : Max. 5V 1A)SpeakerphonePress to answer or end a call.VolumePress to adjust the volume.PairPress to begin pairing.PowerPress to turn the unit on or off.Pair Indicator
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section  at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur www.iLiveElectronics.comInternational SupportFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com  Customer Service: 1-888-999-4215Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.comCopyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.Bluetooth SetupChargingPairing a Bluetooth Device for the First TimeCharging a DeviceRequires a 3.5mm audio cable (not included)1. Connect a 3.5mm audio cable to theLine In on the unit and an audio outputon an MP3 player or other audio source.2. Use the native controls on theconnected MP3 player or other audiosource to play and control audioplayed through the clock radio.Line InUsing the Line In1. Make sure the unit is plugged into thewall.2. Using the appropriate USB chargingcable (not included), connect one endto the device and the other to the USBPort on the unit.Refer to the user’s manual for yourspecic device for manufacturersrequired charging amperage as well asdetermining the appropriate cable foryour device before charging.3. The device will now charge.1. Power on the unit by pressing the Powerbutton. The Pairing Indicator will ash blue quickly.When pairing, remain within 3 feet of the unit.2. Using the native controls on yourBluetooth device, select the “ISB563” inyour Bluetooth settings to pair.If your device requests a password, enterthe default password “ 0 0 0 0 ”.Refer to the user’s manual for your specicdevice for instructions on pairing andconnecting Bluetooth devices.3. When successfully paired and connected,the Pairing Indicator will display a solidblue light.After initial pairing, the unit will stay pairedunless unpaired manually by the user orerased due to a reset of the device.If your device should become unpaired oryou nd it is unable to connect, repeat theabove steps or press the Pair button tostart the pairing process pairing again.1. Follow the instructions in Pairing aBluetooth Device.2. When a call is received, a ringtone willsound through the speakers.3. Press the Speakerphone button toaccept the call or accept the call withthe native controls on the connecteddevice.4. The incoming call received through thedevice will now be heard through thespeakers.5. To end the call, press the Speakerphonebutton or end the call using the nativecontrols on the connected device.1. Follow the instructions for Pairing aBluetooth Device.2. Use the native controls on theconnected Bluetooth Device to select atrack.3. To play or pause the selected track, usethe native controls on the connectedBluetooth Device.4. Audio played through the connectedBluetooth device will now be heardthrough the speakers.Using BluetoothPlaying Audio WirelesslyUsing the SpeakerphoneStatus Pairing IndicatorPower Off No lightPower On Slowly ashing blue lightReady to Pair Quickly ashing blue lightBluetooth Connected Solid blue lightLine In Mode Red lightPower and Pairing Indicator Lights FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu