Junlan Electronic CAB60652 STEREO PORTABLE SPEAKER with Bluetooth Wireless Technology User Manual
Shenzhen Junlan Electronic Ltd STEREO PORTABLE SPEAKER with Bluetooth Wireless Technology
User Manual
P SSTEREO ORTABLE PEAK ER
with Bluetooth Wireless Technology
Owner's Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: CMA3569
with Bluetooth Wireless Technology
STEREO PORTABLE PEAK ER S
1
The unit has a built in DC 3.7V, 400 mAh Li-ion rechargeable battery,
recharge it as follow:
zInset the small plug from the supplied Connection cable to the Micro USB Jack on
the rear of unit.
zInsert the other plug to the USB Port on the Personal Computer or any USB
Charger having DC 5V; 300
below.
During charging, the Red Indicator on the front panel will light. When finished, it
will turn off.
(Personal Computer and USB Charger not included.)
Notes:
Your battery will last longer if you follo
A. For charging first time, charge it at least 10 hours.
B. Recharge and store the battery within the temperature range of 5°C~35°C
(40°F~95°F).
C. Do not over charge (longer than 24 hours). Excessive charging or
discharging may shorten the battery's life.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user
replaceable.
2
To PC or USB Charger
wing these simple guidelines for charging
and storing it.
MIC
Battery Recharge
mA (or more than 300 mA )output as the figure
Location of Controls:
FRONT VIEW
4.
2.
3.
7.
3
10.
POWER ON/OFF Switch
MIC
123456
AUX IN
ON OFF
DC IN
DC 5V, 300 mA
POWER
10
89
5.
LED Indicator
8.
Microphone
7
1. (Volum e Down) Bu t to n 6.
+ (Volume Up) Button
9. Micro USB Port
(For Charging only)
AUX IN Jack
REAR VIEW
–
Button
Button
Button
4
OPERATION
In first time use or re-pairing to new BT Device, pairing the unit to
external BT Device as below:
1. Slide the Power ON/OFF Switch on the rear of unit to ON position. Blue
Indicators on the front panel will light and blinking.
nnection cable h
the AUX IN Jack on the rear of unit. Otherwise, the unit will turn to
2. Power on the external BT Device and enter to searching mode. Start
pairing as the on screen instructions on the external BT Device. After
paired, the Blue Indicator will stop blinking. (For details pairing procedures,
please refer to the user’s manual of your BT Device).
Notes:
z
“CMA3569 ” will appear on the display of external BT Device.
zPairing code “0000” may need to enter.
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Slide the Power ON/OFF Switch to ON position to power on the unit. The
Blue Indicator on the front panel will light, wait until the Blue Indicators is
stop blinking. (It needs take a few seconds).
3. Plays the music in the connected BT Device as usual.
4. During playback:
zPress the + or – (Volume Up or Down) Buttons to adjust volume level
as desire.
zPress the (Play/Pause) Button to pause; press again to resume.
zPress and release the or Button to skip tracks.
5. If the unit was paired to a Cell Phone:
zWhen a call is incoming during listening, press the
When finished, press the
playback.
zPress and hold the Button for last number redialing.
the unit.
When the external BT Device searched the unit, our model number
Button to hook
off then speak to the built-in microphone on front panel to answer the
phone. Button to hook on then resume
to music
6. When finished listening, slide the Power ON/OFF Switch to OFF position to
shut off
a n’t toMake sure the co sAudio
u
Important:
m
to at
inserted
icaII
ay
AUX IN mode will not functioning.
. BT
AUX IN:
1. Slide the Power ON/OFF Switch to ON position to power on the unit. The Blue
Indicator on front panel will light.
2. Connect one end of the supplied Audio Connection Cable to the Line Out; AUX Out
or Phones Jack of the external audio player.
3. Insert other end of the supplied Audio Connection Cable to the AUX IN Jack on the
rear of unit. The unit will turn to AUX IN mode automatically.
– (Volume Up or Down) Buttons to adjust
6. When finished listening, slide the Power ON/OFF Switch to OFF position to shut off
the unit.
Troubleshooting:
Can’t power on Built in battery
consumed
Recharge the battery.
No sound or sound
weak
Volume of the unit was
set to minimum position
Increase the volume level by
press the + Button.
Volume of
paired/connected
device is in low volume
level
Rise the volume level of the
paired BT device or connected
audio player
5
To listening from the external audio player such likeMP3 Player, Disc-man … etc.
4. Plays the music in the connected audio player as usual. (Make sure the volume level
of
5. During playback, press the + or volume
level as desire.
the connected audio player is turned to high level. ( Otherwise, sound is weak. )
Specification
Power Source Built-in DC 3.7V, 400 mAh Li-ion rechargeable
battery. Recharge by DC
Maximum Play time Up to 4
BT Effective range Up to 30 feet in open area
Impedance of
Speakers
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Accessories:
1 x User’s Manual
1 x USB Connection cable (For charge only)
1 x Audio Connection Cable with 3.5mm stereo mini plugs
6
3 W; 4 Ohm x 2
hours after fully charged and playback at 50%
5V; 300 mA through
volume level
Micro USB Port
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $10.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:service@craigelectronics.com
Printed in China CMA3569_WC_E0CL1_B0US
LIMITED WARRANTY
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an e xperienced radio/TV technician for help.