Junlan Electronic CABF2070 Waterproof Portable Speaker System User Manual 1

Shenzhen Junlan Electronic Ltd Waterproof Portable Speaker System 1

Users Manual

MODEL: MHT833PLEASE READ BEFORE OPERATING THIS EQUIPMENT.OWNER'S MANUALWATERPROOFPORTABLE SPEAKERSYSTEM with Decorative Color Changing Lightsand Bluetooth® Wireless TechnologySize: 148.5(W) x 210(H)mm (A5)
2CAUTION:THIS DIGITAL VIDEO DISC PLAYER EMPLOYS ALASER SYSTEM.TO ENSURE PROPER USE OF THIS PRODUCT.PLEASE READ THIS OWNER`S MANUAL CAREFULLYAND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT ANAUTHORIZED SERVICE LOCATION-SEE SERVICEPROCEDURE.USE CONTROLS, ADJUSTMENTS OR THEPERFORMANCE OF PROCEDURES OTHER THANTHOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.TO PREVENT DIRECT EXPOSURE TO LASER BEAM,DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLELASER RADIATION MAY BE PRESENT WHEN THEENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USE THERECOMMENDED ACCESSORIES ONLY.The lightning flash with arrowhead symbolwithin an equilateral triangle is intended to alertthe user to the presence of uninsulateddangerous voltage within the product`senclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andliterature accompanying the appliance.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.maintenance (servicing) instructions in the
3Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated.2) Keep these instructions. The safety and operating instructions should be retained for future reference.3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions. All operating and use instructions should be followed.5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet .10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.15) Power sourceThis product should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply to your home, consult your appliance dealer or localpower company. For products intended to operate from battery power, or other source, refer to theoperation instructions.16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or otherelectric light or power circuits, or where it can fall into such power lines or circuits. Wheninstalling an outside antenna system, extreme care should be taken to keep from touching suchpower lines or circuits as contact with them might be fatal.For example, this unit may not have the capability to be connected to an outdoor antenna.Portable Cart Warning
417) OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.18) Object and liquid entryNever push objects of any kind into the product through openings as they may touch dangerousvoltage points or short out parts that could result in fire or electric shock. Never spill or spray anytype of liquid on the product.19) Outdoor antenna groundingIf an outside antenna is connected to the product,be sure the antenna system is grounded so as toProvide some protection against voltage surges and built up static charges.Section 810 of theNational Electric Code ANSI/NFPA 70 provides information with respect to proper to groundingof the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product,size of grounding conductors,location of antenna-discharge product,connection to groundingelectrodes and requirements for the grounding electrodes.Do not attempt to service this product yourself as opening or removing covers may expose you todangerous voltage or other hazards.Refer all servicing to qualified service personnel.When replacement parts are required,be sure the service technician uses replacement partsspecified by the manufacturer or those that have the same characteristics as the original parts.Unauthorized substitutions may result in fire or electric shock or other hazards.Upon completion of any service or repairs to this product,ask the service technician to performsafety checks to determine that the product is in proper operational condition.The product should be mounted to a wall or ceiling only as recommended by the manufacturer.Unplug this product from the wall outlet and refer service to qualified service personnel under thefollowing conditions.a)When the power-supply cord or plug is damaged.b)If liquid has been spilled or objects have fallen into the product.c)If the product has been exposed to rain or water.d)If the product does not operate normally by following the operating instructions.Adjust onlythose controls that are covered by the operating instructions,as an adjustment of othercontrols may result in damage and will and require extensive work by a qualified technicianto restore in the product to its normal operation.e)If the product has been dropped or the cabinet has been damaged.f)When the product exhibits a distinct change in performance-this indicates a need for service.This reminder is provided to call the CATV system installer's attention to Article 820-40 of theNEC that provides guidelines for proper grounding and,in particular,specifies that the cableground shall be connected to the grounding system of the building,as close to the point of cableentry as practical.NOTE: Refer all servicing to qualified service personnel Servicing is required whenthe unit has been damaged in any way such as the following: the power-supply cordor plug has been damaged, liquid has been spilled into unit, the unit has beenexposed to rain or moisture, the unit has been dropped or the unit does not operate normally.25) Note to CATV system installer24) Damage requiring service23) Wall or ceiling mounting22) Safety check21) Replacement parts20) Service
TO DC IN JACKTo Wall OutletNotes: POWER SOURCESIDE PANELMI C GTUS B PO WE RON O FF5The unit has a built in Sealed Lead Acid rechargeable battery, recharge it before use or when it is drained as follows:1A OUTDC IN2.Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the right of unit as the illustrated below.3.Plug the AC/DC Adaptor to the AC wall outlet having AC 100-240V~, 50/60Hz as illustrated below.5.During charging, you can also play and listening music at the same time.1.Make sure the unit is in Standby or Power on mode. Otherwise, press the POWER ON-OFF Switch to ON position to power on the unit to standby mode. 4.During charging, the Indicators on the Battery Meter will illuminate and blink to show the charging status. When finished charging, all indicators on it will illuminate and stop blinking. Your battery will last longer if you're following these simple guidelines for charging and storing.A. Before first time use, charge it approximately 10 hours until the unit is fully charged.B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).D. Battery life naturally shortens slowly over time.E. The rechargeable battery incorporated in this product is not user replaceable.F. If long period of time will not use, unplug the Adapter from wall outlet.C. Do not charge longer than 24 hours. Excessive charging or running the unit until the battery fully drains will damage battery. Battery life will be extended if you keep the battery fully charged.
3. GT VOLUME (Guitar Volume) Control Knob1. MIC VOLUME (Microphone Volume) Control Knob2. MIC ECHO (Microphone Echo) Control Knob9. BATTERY METER Button12. VOLUME Knob5. POWER Indicator 10. Button 4. (Play/Pause) Button14. Button 13. LIGHT Button22. AUX IN Jack24. POWER ON-OFF Switch23. DC IN Jack ( DC 15V, 2A, )15. Retractable HandlePO WER010MIC VOLUME010MI C ECH O010GT VOLUMEVO LUM ELI GHTMO DEMIC G TUSB POW ERON OF F12 3 4 5 67 9 10 11 12 13152418 1920 2123TOP PANELFRONT VIEW SIDE PANEL2219. GT (Guitar Input) Jack20. USB Port21. 1A OUT (USB charging) Jack18. MIC (Microphone Input) Jack11. M (Memory) Button 6. MODE/ (Mode selection/Power) Button 7. LED Display 161716. Decorative LED Lights17. Wheels61A OUTDC IN88. Indicators of Battery Meter14
General Operation:OPERATIONS:71.Recharged the built inbattery as previously instructed.2.Press the Power ON/OFF Switch to ON position on the right of unit to turnthe unit to standby mode.The POWER Indicator on the top of unit will illuminate.3.Press and hold the /MODE Button on the top of unit approximated 1second until “ON” appear on the LEDDisplay to turn on the unit from standby mode. The LED Display will illuminate.4.Press the /MODE Button repeatedly to switch to desired playback mode.The correspondent indicator willappear on the display with your selection (see list below):Playback Mode: Indicators:BT (Bluetooth) “bt” will appear on the displayUSB (If USB Device inserted) “USb” will appear on displayRadio FM Band Radio frequency “XX.X” or “XXX.X”will appear on the displayAUX IN “AUX” will appear on the display5.During playback,A. Turn the Volume Control Knob on the top of unit to adjust volumelevel as desired.B. Press the LIGHT Button repeatedly tochange the blinking mode ofthe DecorativeLED LightsC. Press the BATTERY METERto read the power of the built-in battery.6.When finished listening, press the /MODE Button to turn the unit toStandby Mode.7.If you will not use the unit for an extended period of time, power off the unitby press the Power ON/OFFSwitch to OFF position. The POWER Indicator will not light.IMPORTANT:The unit is for Water and Dusts Ingress Protective; always make sure all the covers were completelyclosed tightly and firmly.ON/OFFturnor.Button
BT (Bluetooth) pairing:3. If pairing is complete you may now play music and answer calls with your external BT Device. ● Press the Button on the unit to pause, press again to resume normal playback. ● Press the or Buttons repeatedly to skip tracks.Normal operation after pairing:3. After pairing is complete you may now play music with your external BT Device.81. Power on the unit and enter to BT mode as previously instructed. “bt” will appear on the display and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. After paired, the “bt” Indicator on the display will stop blinking.4. During playback:Notes:● ● If while pairing you are asked for a code please try “ 0000 ” or “ 1234 ”. When the external BT Device searched the unit, our model number “ MM833 ” will appear on the display of external BT Device.1. Power on the unit and enter to BT mode as previously instructed. “ bt ” will appear on the displayand blink. 2. Wait a few seconds until the unit is automatically paired to the external BT Device. The "BT MODE:First time use or re-pairing the unit to a new BT Device, pair as follows:“ bt ” indicator on the display will stop blinking.
AUX IN:1. Insert one of the plug from the Audio connection cable with 3.5mm stereo mini plugs to the Phone Jack; Line Out Jack or AUX Out Jack on external audio device such like the iPhones; iPad; iPod; MP3 Player; Discman … etc.2. Insert the other plug to the AUX IN Jack as the figure below:3. Power on the unit as previously procedures.4. Press the MODE/ Button repeatedly until the AUX appears on display.5. Plays the music in the connected external Audio device as usual. (Make sure the volume level of the external device in high level. Otherwise, sound from this unit is weak).FM Antenna:The unit had a built-in FM antenna. If reception is weak; turn or relocate the unit to improve the radio reception.FM (Radio):1. Power on the unit as previous procedures. In first time use (or replaced the unit in a new location), press and hold the Button to search2. Press the MODE/ Button on top of the unit repeatedly until the FM frequency appears on display. repeatedly to select and play the desired stored FM station.and store the available FM station automatically. After searching and storage, press the Store the FM station automatically:Store the FM station manually:3. Press the or Button to search and play the desired station manually.or press and hold the or Button to search the available station, when a station searched, theunit will stop seraching and play the station.Search and play the FM station:Press the or Button to search the available desired station, then press the Button to select the storage location, press the Button again to confirm storage. Repeat the above operations to store up to 20 stations." "MI C GTUS B PO WERON O FFMobile PhoneConnect to the Phones; AUX Out; (Such like MP3 Player; cell phones; iPod/iPad ... etc)MP3 PlayerLine Out Jack of the external devicesSIDE FUNCTION PANELAudio connection cable NOT included" "9ButtonButton on top of the unit, CHXX will appear on display (here XX stand for 01 to 20), press the or1A OUTDC IN
Microphone:2. Power on the unit and play the music as usual.3. Slide the ON/OFF Switch on the Microphone to ON position to turn on the Microphone.4. Turn the MIC Volume (Microphone Volume) Knob on the top of unit to adjust the sound level from connected microphone. NOTE: If feedback noise (high audio frequency noise) is hearing from the speakers, turn the MIC Volume (Microphone Volume) Knob counterclockwise to reduce the microphone volume level or keep the Microphone away from the speakers.5. Turn the MIC ECHO (Microphone ECHO) Knob on the top of unit to adjust the effect of echo as desired.6. When finished, slide the ON/OFF Switch on the Microphone to OFF position to shut off the Microphone. And/or unplug the Microphone from the unit. Guitar (Electric):as the figure below:2. Power on the unit as usual.3. Turn the GT Volume (Guitar Volume) Knob on the top of unit to adjust the sound level from connected guitar. NOTE: If feedback noise (high audio frequency noise) is hearing from the speakers, turn the GT Volume (Guitar Volume) Knob counterclockwise to reduce the volume level or keep the guitar away from the speakers.4. When finished, unplug the guitar from the unit.Dynamic Microphone IncludedElectric Guitar (not supplied)MI C GTUS B PO WE RON O FF1.Connect the supplied Microphone to the MIC Jack as the figure below: MI C GTUS B PO WE RON O FF1.Connect the connection plug from the Electric Guitarto the GT (guitar input) Jack SIDE FUNCTION PANELSIDE FUNCTION PANEL101A OUTDC IN1A OUTDC IN
USB:2. Power on the unit and play the music as usual.USB Device NOT IncludedMI C GTUS B PO WE RON O FF1. Insert the USB Device into the USB port as the figure below: USB3. Press the MODE/ Button on top of the unit repeatedly until the USb appears on display. " "4. The unit will play the music in the connected USB device automatically. (Make sure the volume level of the external device in high level. Otherwise, sound from this unit is weak).5. During playback:● Press the Button to pause; press and release again to resume normal playback.● Press the or Button to skip tracks.● Press and hold the or Button to fast backward or fast forward.6. When finished, unplug the USB device. NOTE: When the USB device inserted, USB mode will be selected automatically.SIDE PANELUSB CHARGING:11To charging the external USD Device:1. Make sure the unit is in power on or standby mode.2. Connect the full size USB Plug from the external USB Device to the 1AUSB Port on the right on unit.3. The charging will auto start.4. When finished charge, disconnect the external USB Device from the 1AUSB Port.Notes:A. Before charge the external USB Device, check the power of the built-inbattery. If the power of the batteryis too low, it cannot be charge the External USB Device.B. The unit has a built-in overload/overheats protector. If the output of theunit is overload (or short circuit).The charger will auto shut off. Unplug the external USB Device from the 1A USB Port.The charge will auto reset.1A OUTDC IN
TROUBLESHOOTING GUIDECheck the follows before requesting service:SYMPTOM POSSIBLE CAUSE No power Power Switch is in OFFpositionPress the POWER ON-OFF Switchon the right of unit to ON positionNo Sound Volume in minimum position Rise volume level by turning th clockwiseeTheis not in playback modeRise the volume level of theconnected /paired devicePlay mode incorrectSound distortion Volume level too highBT not function The external BT device toofar from the unitPOSSIBLE SOULTION VOLUME Control KnobBuilt-in battery cannot be recharge.The unit is not powered on Built-in rechargable battery drainedRecharge the built-in battery Place the external BT device close to the unitReduce the volume and/or bass levelof the connected /paired deviceVolume level of the connected/paired device too highReduce the volume level by turning the VOLUME Control Knob counterclockwisePress the MODE/ play mode as the connectionPlays the audio/video files in theconnected/paired device as usualRetractable Handle:Press the button on the top of the handle to release the lock then pull it out orButton repeatedly to set or reset the 12back as the illustrated figure below:connected/paired device or standby modePress the POWER ON-OFF Switch toON position, or put the unit to standby modeSound output of theconnected /paired device
Power Source:....….........................…...............Built-in rechargeable DC 12V, 4000mAh BT Version: …………………...............................................................................................................2.113General Specifications:Accessories:1 x User’s Manual1 x AC/DC Adapter1 x MicrophoneSPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICERadio FM Band Coverage: ………………….....................................……...........................87.5-108MHzBT Effective Range: …………………………..................................................Up to 32 Feet in open areaAudio Power: …………………………………………….................................................…..……........20WCleaning:1. To prevent fire or shock hazard, disconnect your unit from the AC/DC Adapter when cleaning.2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.3. Mild soap and a damp cloth may be used.Impedance of Speakers:Loud Speaker………………….................................................................... 4 Ohms, 35W x 1 Water and Dust Ingress Protection Level:....…..........................................................................…...IP44 (39.6 WH) Sealed Lead Acid battery; (Recharge by DC 15V, 2A)Tweeter.........…………………..................................................................... 8 Ohms, 12W x 1Input: AC 100-240~; 50/60Hz; 0.8A Max.Output: DC 15V, 2A
Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 180 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $20 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.This product has been manufactured by and is sold under the responsibility of Craig Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product. MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China MHT833_WC_E0CL1_B0WULIMITED WARRANTY
FCC NOTICE:This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interferencethat may cause undesired operation.FCC WARNING:To assure continued operation, follow the attached installation instructions anduse only shield cables when connecting to other devices. Changes ormodifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu