Junlan Electronic CD695 4-IN-1 RETRO TURNTABLE SYSTEM WITH BLUETOOTH WIRELESS TECHNOLOGY User Manual

Shenzhen Junlan Electronic Ltd 4-IN-1 RETRO TURNTABLE SYSTEM WITH BLUETOOTH WIRELESS TECHNOLOGY

User Manual

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.Owner's ManualSize: 148.5(W) x 210(H)mm (A5)4-IN-1 RETRO TURNTABLESYSTEM WITH BLUETOOTHWIRELESS TECHNOLOGY4-IN-1 RETRO TURNTABLESYSTEM WITH BLUETOOTHWIRELESS TECHNOLOGYMODEL:CD695
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USE THERECOMMENDED ACCESSORIES ONLY.FCC NOTICE:This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not Installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC WARNING:To assure continued compliance, follow the attachedinstallation instructions and use only shielded cableswhen connecting to other devices. Modifications notauthorized by the manufacturer may void user`s authorityto operate this device.EXERCISE CAUTION AS UNIT HAS SHARP POINTS.IMPORTANT SAFETY INSTRUCTIONSCALIFORNIA PROP 65 WARNING:This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and following website: http://www.oehha.ca.gov/prop65.htmla list of chemicals, log on the CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTEMOVE COVER (OR BACK). NO USER-SERVICEABLE ARTNSIDE EFER SERVICING T UALIFIED ERVICE PERSONNEL.The lightning flash with arrowhead symbolwithin an equilateral triangle is intended to alertthe user to the presence of uninsulateddangerous voltage within the product`senclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance(servicing) instructions in theliterature accompanying the appliance.S IPSO Q. RR2
Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit.For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated.2) Keep these instructions. The safety and operating instructions should be retained for future reference.3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions. All operating and use instructions should be followed.5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time.To protect your product from a lightning storm, or when it is left unattended and unused for longperiods of time, unplug it from the wall outlet and disconnect the antenna or cable system. Thiswill prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as power-supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into the apparatus, the apparatus has been exposed to rainor moisture does not operate normally, or has been dropped.15) Power sourceThis product should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply to your home, consult your appliance dealer or localpower company. For products intended to operate from battery power, or other source, refer to theoperation instructions.16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. IMPORTANT SAFETY INSTRUCTIONS3
17)OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electricshock.18)Object and liquid entryNever push objects of any kind into the product through openings as they may touch dangerousvoltage points or short out parts that could result in fire or electric shock. Never spill or spray anytype of liquid on the product.19)Outdoor antenna groundingIf an outside antenna is connected to the product, be sure the antenna system is grounded so as toProvide some protection against voltage surges and built up static charges. Section 810 of theNational Electric Code ANSI/NFPA 70 provides information with respect to proper groundingof the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product,size of grounding conductors, location of antenna-discharge product, connection to groundingelectrodes and requirements for the grounding electrodes.20)ServiceDo not attempt to service this product yourself as opening or removing covers may expose you todangerous voltage or other hazards. Refer all servicing to qualified service personnel.21)Replacement partsWhen replacement parts are required, be sure the service technician uses replacement partsspecified by the manufacturer or those that have the same characteristics as the original parts.Unauthorized substitutions may result in fire or electric shock or other hazards.22)Safety checkUpon completion of any service or repairs to this product, ask the service technician to performsafety checks to determine that the product is in proper operating condition.324)Damage requiring serviceUnplug this product from the wall outlet and refer service to qualified service personnel under thefollowing conditions.a)When the power-supply cord or plug is damaged.b)If liquid has been spilled or objects have fallen into the product.c)If the product has been exposed to rain or water.d)If the product does not operate normally by following the operating instructions. Adjust onlythose controls that are covered by the operating instructions, as an adjustment of othercontrols may result in damage and will require extensive work by a qualified technicianto restore the product to its normal operation.e)If the product has been dropped or the cabinet has been damaged.f)When the product exhibits a distinct change in performance-this indicates a need for service.2)Note to CATV system installerThis reminder is provided to call the CATV system installer's attention to Article 820-40 of theNEC that provides guidelines for proper grounding and, in particular, specifies that the cableground shall be connected to the grounding system of the building, as close to the point of cableentry as practical.NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damagen any way such as the following: the power-supply cord or plug has been damaged, liquid has beepilled into unit, the unit has been exposed to rain or moisture, the unit has been droppe r the unit doeot operate normally. IMPORTANT SAFETY INSTRUCTIONS4d in s d o s n
21Insert the AC/DC Adapter power plug into a conveniently located AC outlet having AC 120-240V~,50/60Hz.AC outletAC/DC AdapterTo the DC IN jack of the rear of the unit.Open/close the turntable cover1. Lift the cover.3. Close the cover.1. Lift the turntable cover.2. Push the arms to backward torelease the lock.2. Pull the arms to front to lock itas the figure on left.Power Source5
Rear ViewFront View FM ATMBVOL UMEUX/AONOHP1 2 3 4 1AUXDC INANTLINE OUTLR6897Turntabletone arm holdertone armFEDADBBefore use, take out the stylusguard ( white plastic cover ) bypull it out.turntablecue-leverCBA45 RPM adapterLocation of Controls6. Antenna7. AUX Jack8. LINE OUT Jack9. DC IN Jack1. Speaker2. Function Knob3. Tuning knob4. Volume KnobCEF55. Indicator6speed selector
Listening through Bluetooth3. Activate the Bluetooth function in your player(e.g. Mobile phone) and try to sear and pair.4. The pairing name “ ” will appear on pairing list and choose it to make pairing.6. During playing, the indicator will blink slowly, adjust volume level by volume knob.5. It will send a sound after successful pairing and connection, the indicator will stay lit. FM ATMBVOL UMEUX/AONOHPAfter first time pairing and connection, the unit can be paired and connected with the device connected before. VO LUME FM ATMBUX/AONOHPCD695NOTE:1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up.2. Turn the function selector to the "BT" position, the indicator will light up Blue and blink fastly, now it is ready for pairing.7
Listening to a RecordIf playing the small size 45 rpm record, insert the clip45 RPM adaptorStep 1Step 245 RPM Adapter FM ATMBVOLU MEUX/AONOHPNOTE:1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up.VO LUME FM ATMBUX/AONOHP2. Turn the function selector to the "PHONO/AUX" position. 3. Open the cover.4. Select the speed.3345785. Put the record on the turntable. supplied adaptor to the center spindle before placing the record. 6. Unlock the clip to release the tone arm as the figurebelow.Before use, make sure there is no 3.5mm audio cable Before use, take out the stylus guard(white plastic cover).plugged in the AUX jack on rear of the unit.8
7. Raise the leve to lift the tone arm as the figure below.tone arm lever8. Move the tone arm to the top of the record. The turntable will start to run.lever9. Place the tone arm to the desired point on the record by turning the lever as the figure below.10. Turn the volume knob to adjust the volume level.VO LUME11. When finished listening, replace the tone arm tothe arest and lock it as previous procedure.Turn the VOLUME Knob counterclockwise until a "click"sound is heard to power off the unit. 9
Listening to the RadioAntenna:AMFM - This unit has a built-in ferrite rod antenna, whichprovides adequate reception in most areas. If - The FM Antenna wire is for FM reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception.reception is weak, turn the unit to improve reception.1. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up.VO LUME FM ATMBUX/AONOHP2. Turn the function selector to the "FM" or "AM" position. 3. Turn the tuning knob to receive the desired radio station.VO LUME4. Turn the VOLUME Knob to adjust the volume level.power off the unit. 5. When finished listening, turn the VOLUME Knob counterclockwise until a sound "click" is heard to 10
AUXDC INANTLIN E OUTLR ~ Insert the other end to the AUX jack on the rear of unit.Notes:Otherwise, sound will weak.device.4. Plays the music/radio as previous procedures. Sound AUX IN:1. Connected the external audio device to the unit by an ~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device.5. When finished listening, turn the VOLUME knobMake sure the sound output level of the connected device is in high level.If sound is distortion, reduce the sound output level of the external audiocable with RCA plugs ( cable not included ) as: ~ Insert one end to the Line IN or AUX IN jacks on the external audio Amplifier.VOLUME knob to minimum position).Mobile PhoneTo the Line In/AUX In jacks on the external audio Amplifier Adjust the volume level by the volume control on the Amplifier.(If do not want to hear the sound from this unit at the same time, turn the Other Connections audio connection cable with 3.5mm stereo mini jacks as:(Audio Connection Cable supplied) (Connection Cable not included) AUXDC INANTLIN E OUTLRTo AUX jack on the rear of the unitConnect to the Phones; AUX Out;Line Out Jack of the external devices (Such like MP3 Player; cell phones; iPod/iPad ... etc)2. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up.VO LUME FM ATMBUX/AONOHP3. Turn the function selector to the "PHONO/AUX" position. 4. Plays the music on the connected external audio device as usual.counterclockwise until a "click" sound was heard to power off the unit.LINE OUT:1. Connected the external audio device to the unit by a ~ Insert the other end to the LINE OUT jacks on the rear of unit.5. When finished listening, turn the VOLUME knobcounterclockwise until a "click" sound was heard to power off the unit.2. Turn the VOLUME Knob clockwise until a sound "click" is heard to turn on the unit, the indicator will light up.VO LUME FM ATMBUX/AONOHP3. Turn the function selector to the "PHONO/AUX" position. will be heard from the external audio Amplifier system.To the Line In/AUX In jacks on the external audio Amplifier 11
Records HandlingHow to replace the stylus1. Use a screwdriver to push the stylus off then pull it out asthe figures below:Replace the stylus2. Install the new stylus as figures below:12
TroubleshootingNoisy sound:Radio:Turntable:Not playing or sound distortionThe Function selector is in wrong position, turn it to PHONO/AUX position.Rising the volume level by turn the VOLUME knob clockwise. Loosen the screw, and take out the stylus guard. (The stylus guard is a white plastic cover that protects the stylusduring transportation.)Select the correct playback speed.The unit is too close to a TV set or similar appliances. Relocate the unit.Check the connection of AC wall outlet.Can not listen to any station, or signal is too weak.If you experience any problems with the unit, please take a monent to look through this chart and see if you can solve theproblem yourself before you call your dealer.Maintenance:Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using.No power:No sound:Bluetooth:Bluetooth reception failureThe external device is too far from the unit.Have not paired.(Pair the unit as the procedure stated in manual).Tune the station properly.The function selector is in wrong position, turn it to AM or FM position.Relocate the unit.13FCC Caution.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
530 kHz to 1710 kHzSpecifications88MHz~108MHzDC servo motorBelt Drive33-1/3 rpm, 45 rpm, 78 rpmCSC-015Design and specifications are subject to change without notice.Audio:Radio:Frequency range (FM).................................................................................................................................Frequency range (AM)...........................................................................................................................Turntable:1 x User's manual2 x Stylus (one for installation, one for spare)1 x 45rpm AdaptorAccessories:1 x 3.5 mm stereo connection cableGeneral:Power requirements..........................................................................................................................AC 120-240V~,50/60HzPower Consumption......................................................................................................................................................13WImpedance of speakers...................................................................................................................................2 X 3W; 4OhmMotor............................................................................................................................................................Drive System.........................................................................................................................................................Speed........................................................................................................................................Stylus.......................................................................................................................................................................14

Navigation menu