Junlan Electronic CHT923 Sound bar with FM/Bluetooth Music Player User Manual CHT917BT IB English

Shenzhen Junlan Electronic Ltd Sound bar with FM/Bluetooth Music Player CHT917BT IB English

Manual

WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: •Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. •••FCC WarningsFCC NOTICE:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user’s authority to operate this device.
2. Mounting the Speaker Bar onto a wallWe recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.Distance Between Two Brackets1. Placing on the tableWhen placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard. 22.9 inchesAC/DC adapterTo the DC IN jack on the rear of unit.to the wall outlet having AC 100-240V~, 50/60 Hz.Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor NOTE:This AC/DC Adapter is intended to be correctly orientated in a vertical or floor mount position.
1. Mark the position of the mounting screws on the wall using a pencil.2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar. 3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.4You may use2 pieces plastic inserts (Included)2 pieces screws (Included)1. Mark the position of the mounting screws on the wall using a pencil.3. Insert the supplied plastic inserts into the holes by hammer .5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.(1) (2)4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch2 pieces screws (Included)2.2 Mounting on the wooden wall:You may use 22.9 inches 22.9 inches2.2 Mounting on the wall2.1 Mounting on the wooden walllength to hook the sound bar.( Not Supplied )2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).
51.Remote Sensor3.SpeakersLRAUX 2-+VOL SOURCEANTAUX 1DC INDC 16V, 3ALRAUX 2-+VOL SOUR CEANTAUX 1DC INDC 16V, 3AFront ViewTop View and Back View546782. LCD Display910114. DC IN jack 5. ( Mute ) button6. SOURCE button 7. Standby button8. AUX 1 jacks 9. VOL ( Volume ) + and - buttons10. AUX 2 jack 11. ANT ( Antenna )
6CH+EQTUNE- MTUNE+ MO/ST SOURCEBASS -BASS+VOL-VOL+CH-SLEEPTREBLE-TREBLE+CLOCK123456781011121. CH+/ ( Channel Up )7. CH - / ( Channel Down )2. Power 3. TUNE + / ( Tune or Skip Forward )5. M/ ( Memory/Play/Pause )6. SLEEP8. MO/ST ( Mono/Stereo )9. BASS +/- 10. ( Mute )11. EQ ( Equalizer )In Standby mode, press and hold to enter to time set mode. 14.SOURCE(mode) Press repeatedly to select the input source to FM; LINE; AUX or BT.913. SOURCE 14. VOL ( Volume ) +/- 15. TREBLE +/- 12. CLOCK ( Set ) 4. TUNE - / ( Tune or Skip Backward )131415
7BATTERY PRECAUTIONSFig.1 Fig.2 Fig.3-First Time UseRemove and discard the insulation tab as figure on the right-Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.3. Close the battery holder.2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. °Remote Sensor 30 °30
TIME SET OR RESET:1. Connect the unit to the power as previous procedures. The LCD Display will turn on. 2. Make sure the unit is in Standby mode, then press and hold the CLOCK button on the remote control. The digit of hour will blink.3. Press the or button repeatedly to set hour . ( Make sure PM indicator appear on the display if the time is PM and not appear if the time is AM ).4. Press the CLOCK button again, the digit of minute will blink.5. Press the or button to set minute.6. When finished, press the CLOCK button again to save the settings and exit.SLEE TIMER:PPPPPPPPP8GENERAL OPERATIONSIn power on mode, press the SLEEP button on the remote control repeatedlyto activate and set the sleep time of the sleep timer. " " will appear on the display. To turn off the Sleep Timer before times up, press the SLEEP button repeatedly to reset the sleep time to "OFF".
1. Connect the Sound Bar to the power as previous procedures.2. Press the Power button on the unit or remote control to power on the unit. 3. Press the SOURCE button on the unit or remote control repeatedly until FM Frequency shows on the LCD Display to turn to Radio ( FM ) mode.4. In first time use: ~ Press and hold the / TUNE - or /TUNE + buttons approx. 1 second, then release to start auto searching the next or previous available station. ~ When the available FM station is searched, the unit will stop search then start playback. ~ Press the M/ button to enter to memory mode, the current program number will appear on the display and blink. ~ Press the CH ( Channel ) + or - buttons on the remote control repeatedly to desired program number then press the M/ button to stored it. ~ Repeat the same procedures until all the desired available FM stations were stored. ( Total 20 stations can be programmed.)5. After programmed, press the CH + or - buttons to selected the desired programmed channel.NOTE: If the AC power is cut off or failure, the stored program may be erased. Reset 6. If reception no good, press the or buttons repeatedly to fine tune. again as above procedures.LISTEN TO FM RADIOFM Antenna and extend the wire or relocate the wire to improve the radio reception.The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind97. Press the MO/ST (Mono/Stereo) button repeatedly to set to Mono or Stereo mode as desire. 4. During Playback:~ Press the VOL ( Volume ) + or - buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as desired.~ Press ( Mute ) button to turn off the sound. Press again to resume.GENERAL OPERATIONS1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure .2. Press the Power button on the unit or remote control to power on the unit from standby mode.The LCD display will turn on.6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.3. Press the SOURCE button repeatedly to ~ Press the BASS +/- buttons to adjust the sound level of bass. ~ Press the TREBLE +/- buttons to adjust the sound level of treble. 5. When finished listening, press the Power button on the remote control or unit to power off ( Standby mode ) the unit. switch to desired mode.
10BLUETOOTH PARING AND PLAYBACKBT ( Blue Tooth )1. Power on the unit as previous procedures.2. Press the SOURCE button repeatedly until BT appears on the display and blink.3. Power on the external BT Device and enter to searching mode. Start pairing as the onNotes:1. When the external BT player searched the unit, our model number "CHT923" will appear on the display of external BT device.2. Pairing code "0000" may need to enter.Normal operation after paired:2. Turn on the BT function of the external BT Device.1. Power on the unit and selected the playback source to BT as previous procedures.3. Wait a few seconds until the unit paired to the external BT Device automatically.( BT on display will stop blinking ).4. Play the music in the connected BT Device as usual.5. During playback:--Press the button to pause; press again to resume normal playback.--Press the /TUNE - or / TUNE + buttons to skip tracks.screen instructions on the external BT Device. After paired,( For details pairing procedures, please refer to the user's manual of your BT Device.) BT ( Blue Tooth ) BT on display will stopblinking.In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:
1. Connect the Headphone/Earphone; Line out jacks from the external audio player (such like MP3 player; Discman … etc) to the AUX 2 jack on the rear of unit by the supplied Audio Connection Cable as the figure below:Audio PlayerTo Phone Jack2. Connect the unit to the power as previous procedures. 4. Press the SOURCE button repeatedly until " AUX 2" appear on display. 5. Power on the connected external player and start playback music as usual. UX 2DVD1. Connect the Aux out jacks from the external audio player (such like TV, DVD player, VCR …etc.) to the AUX 1 jacks on the rear of unit by the supplied RCA Connection Cable as the figure below:2. Connect the Sound Bar to the power as previous procedures. 3. Press the ( ) Power button to power on the unit. 4. Press the SOURCE button repeatedly until " AUX 1" appear on display. 5. Power on the connected external player and start playback music as usual. redwhiteLRAUX 2ANTAUX 1DC INDC 16V, 3ALRAUX 2ANTAUX 1DC INDC 16V, 3A11AUX 1 : LISTEN TO TV/DVD/VCR/DVRAUX 2 : LISTEN TO EXTERNAL AUDIO DEVICESTo Audio Out Jacks3. Press the ( ) Power button to power on the unit.
Check the followings before requesting serviceSYMPTOM POSSIBLE CAUSE POSSIBLE SOULTIONPress the SOURCE button repeatedly to set the input source to the desired modeTROUBLESHOOTING GUIDENo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not pairedThe external device is far fromthe unitThe battery is consumedVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionThe unit is in Standby modeConnect the power AC/DC adapterPress button to turn on the unitRaise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelReduce the bass level of the connecteddevice.VOL (Volume ) - buttonReduce the volume level by pressing the Replace with new batteryPut the external BT device close to theunitPair both units as BT pairing pagePower AC/DC adapter not connected 12Press the BASS - button on the Sound Bar to reduce bass level.
...........................................................................8 Ohm,10 W x 2 13Power Source........................................................................................ DC 16V; 3A,Radio Coverage.............................................................................................FM 87.5 -108.0 MHz---Remote Effective Range..........................................................................................Up to 16 feetBluetooth Effective Range in Open Aera....................................................................Up to 32 feetLoud Speakers Woofer ........................................................................... 8 Ohm,15 W x 2 ........1 x Remote Control, using CR 2025 button cell ( Included, already installed in remote control )1 x Stereo Audio Connection Cable with 3.5mm stereo plugs1 x User's Manual1 x AC/DC Adaptor ( Input: AC 100-240V~ 50/60Hz; 1.4A Max. Output: DC 16V; 3 A, ) 2 x Metallic Screws ( For Wall Mount )2 x Plastic Inserts ( For Wall Mount )Impedance of Speakers: 1 x RCA Connection Cable ---
Size: 148.5(W) x 210(H)mm (A5)Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China CHT923_WC_E0CL1_H0USLIMITED WARRANTY

Navigation menu