Junlan Electronic CHT939 32 INCH STEREO SOUND BAR with Bluetooth Wireless Technology User Manual CHT917BT IB English

Shenzhen Junlan Electronic Ltd 32 INCH STEREO SOUND BAR with Bluetooth Wireless Technology CHT917BT IB English

User manual

Owner's ManualPLEASE READ BEFORE OPERATING THIS EQUIPMENT.with Bluetooth® Wireless Technologywith Bluetooth® Wireless TechnologyIB Size: 105.5 x 210mm (A5)32 INCH32 INCHSTEREO SOUND BARSTEREO SOUND BARModel:CHT939
  WARNING:Changes or modifications to this unit  not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:     •Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. •••FCC WarningsFCC NOTICE:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user’s authority to operate this device.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
2. Mounting the Speaker Bar onto a wallWe recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.Distance Between Two Brackets1. Placing on the tableWhen placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.To the DC IN jack on the top of the unit.22.4 inchesTo the wall outletNOTE: If Long period of time will not use the unit, unplug the AC Cord from the wall outlet.1.   Insert the plug from the supplied AC/DC adaptor to the DC In Jack on the top of unit.2.   Insert the small plug from the supplied AC Power Cord to the AC In Jack on the AC/DC Adaptor.3.   Insert the AC Plug from the supplied to the wall outlet Having AC 100-240V~; 50/60Hz.To the AC In Jack
1. Mark the position of the mounting screws on the wall using a pencil.2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar. 3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.4You may use2 pieces plastic inserts (Included)2 pieces screws (Included)1. Mark the position of the mounting screws on the wall using a pencil.3. Insert the supplied plastic inserts into the holes by hammer                        .5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.(1) (2)4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch2 pieces screws (Included)2.2 Mounting on the wooden wall:You may use2.2 Mounting on the wall2.1 Mounting on the wooden walllength to hook the sound bar.( Not Supplied )2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).22.4 inches22.4 inches
OPTICA LAUX IN 2LRAUX IN 1FM ANTPOWER/SOURCEVOL- VOL + PLAY/PAUSETUNE- TU NE+52.Remote sensor3. Speakers1. Indicator3. SpeakersFront ViewPOWER/SOURCEVOL- VOL+ PLAY/PAUSEFM ANTAUX IN1AUX IN2LR2 3 4 5 6 7 8 9 10 112. FM ANT ( FM Antenna )3. AUX IN 1 jack4. AUX IN 2 jacks5. DC IN jack6. POWER/SOURCE button 7. VOL- ( Volume Down ) button8. VOL+ ( Volume Up ) button9. PLAY/PAUSE button10. TUNE-/       ( Skip Backward ) buttonTUNE- TUNE+11. TUNE+/      ( Skip Forward ) button  Top ViewOP TIC AL11. OPTICAL (Optical In Jack)DC I NDC      1 6V, 1.8ADC INDC      16V, 1.8 A
EQSOURCEBASS -BASS+VOL-VOL+MO/STTREBLE-TREBLE+6In Standby mode, press and hold to enter to time set mode. 14.SOURCE(mode) Press repeatedly to select the input source to       FM; LINE; AUX or BT.1234567891011TUNE- TUNE+2. TUNE-/       ( Skip Backward ) button3. TUNE+/      ( Skip Forward ) button 1.      Power ON/OFF button4. MO/ST ( Mono/Stereo ) button5. SOURCE button6. BASS +/- buttons7.       ( Mute ) button8. EQ ( Equalizer ) button9.       ( Play/Pause ) button10. VOL ( Volume ) +/- buttons11. TREBLE +/- buttons
7BATTERY PRECAUTIONSFig.1 Fig.2 Fig.3- First Time UseRemove and discard the insulation tab as figure on the right.1. Push and slide out the battery holder as figure 1 below.3. Close the battery holder.2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. °Remote Sensor 30 °308. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, itcan cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or  placed inside any part of the body, seek immediate medical attention.- If the battery is consume, replace it as below: Folloe these precautions when using a battery in this device:1. Use only the size and type of battery specified.2. Be sure to follow the correct polarity when installing the battery as indicated in the batterycompartment. A reversed battery may cause damage to the device.3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc ) or old batteries with fresh ones.4. If the batteries in the device are consumed or device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.( Follow battery manufacturer's instructions.)6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.7. Clean the battery contacts and also those of the device prior to battery installation.
1.  Connect the Sound Bar to the power as previous procedures.2.  Press the   4.  LISTEN TO FM RADIOFM Antenna and extend the wire or relocate the wire to improve the radio reception.The Antenna wire on the top of the unit is for radio reception. If reception is weak, unwind84. During Playback:~ Press the VOL ( Volume ) + or - buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as desired.~ Press the      ( Mute ) button to turn off the sound. Press again to resume.GENERAL OPERATIONS1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure. The Red 6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.3. Press the POWER/SOURCE button on the unit or press SOURCE button on the remote control     ~ Press the BASS +/- buttons to adjust the sound level of bass.   ~ Press the TREBLE +/- buttons to adjust the sound level of treble. ( Standby mode ) the unit. repeatedly to switch to desired mode, the color of the Indicator will turn to:2. Press the POWER/SOURCE button on the unit or press the       Power button on the remote  button on the remote control to power off 5. When finished listening, press and hold the POWER/SOURCE button on the unit or press the       POWER/SOURCE button on the unit or  the      button on the remote control  to power on the unit.  Press and hold the TUNE -/      or TUNE +/       buttons until the Indicator start blinking   3.  Press the POWER/SOURCE button on unit or press the SOURCE button on the  remote control repeatedly until  the color of the Indicator turns to Purple.  5. Press and release the TUNE - /     or TUNE + /      buttons repeatedly to fine tune. Indicator will light.Purple------------------------------------------------------------FM RadioAUX IN 1Yellow----------------------------------------------------------- AUX IN 2Blue--------------------------------------------------------------- Bluetooh to search and plays the searched available FM station. 6. If the available FM station is stereo, the unit will play it in stereo mode automatically. If the reception is no good, press the MO/ST button on the remote control to switch it to Mono mode. Press again to turn back to Stereo mode. control to power on the unit from standby mode. The color of the Indicator will turn to correspondence color.Green------------------------------------------------------------(To reset the EQ to normal mode; power off the unit then power on again) Cyan---------------------------------------------------------------- Optical
9BLUETOOTH PARING AND PLAYBACK1. Power on the unit as previous procedures.3. Power on the external BT Device and enter to searching mode. Start pairing as the onNotes:1. When the external BT Device searched the unit, our model number " CHT939 " will appear on the display of external BT Device.2. Pairing code "0000" or "1234" may need to enter.Normal operation after paired:2. Turn on the BT function of the external BT Device.1. Power on the unit and selected the playback source to BT as previous procedures.3. Wait a few seconds until the unit paired to the external BT Device automatically. The4. Play the music in the connected BT Device as usual.screen instructions on the external BT Device. After paired,( For details pairing procedures, please refer to the user's manual of your BT Device.) The Indicator will stopblinking.In first time use or re-pairing to new BT Device, pairing the unit to the external BT Device as follows:2. Press the POWER/SOURCE button on the unit or press the SOURCE button on the  remote control repeatedly until the color of the Indicator turns to Blue.Blue toothBlue indicator stop blinking.5. During playback:~  Press the TUNE -/      or TUNE +/       buttons to skip the tracks.~  Press the PLAY/PAUSE button on the unit or       button on the remote control to  pause. Press again to resume normal playback.
1.  Connect the Headphone/Earphone;  Aux       (such like MP3 player; Discman … etc) to the AUX IN 1 jack on the top of      unit by the supplied Audio Connection Cable as the figure below:Audio PlayerTo Phone Jack2.  Connect the unit to the power as previous procedures.  4.  Power on the connected external player and start playback music as usual. 101. Connect the Aux out jacks from the external audio player (such like TV, DVD player,    VCR …etc.) to the AUX IN 2 jacks on the top of unit by the RCA Connection Cable as the figure below:2. Connect the Sound Bar to the power as  previous procedures.  RedWhiteTo Audio Out JacksAUX IN 1 : LISTEN TO EXTERNAL AUDIO DEVICESAUX IN 2 : LISTEN TO TV/DVD/VCR/DVRFM ANTAUX IN1AUX IN2LRFM ANTAUX IN1AUX IN2LRTop of the unitTop view of the unit3. Press the POWER/SOURCE button on the unit or press the SOURCE button on the out jack or Line out jack from the external audio player 3.  Press the POWER/SOURCE button on the unit or press the SOURCE button on the remote control repeatedly until theVIDEO  R  LTVcolor of the Indicator turns to Green.remote control repeated until the Indicator turns to Yellow.4. Power on the connected external player and start playback the Video/Music as usual.OPTICAL OPTICALDC I NDC      1 6V, 1.8ADC I NDC      1 6V, 1.8A
 DVD or TV, etc.POWER/SOURCEVOL- VOL+ PLAY/PAUSEFM ANTAUX IN1AUX IN2LRTUNE- TUNE+ OP TIC ALDC I NDC      1 6V, 1.8ATop view of the unit2. Connect the Sound Bar to the power as  previous procedures.  3. Press the POWER/SOURCE button on the unit or press the SOURCE button on the remote control repeated until the Indicator turns to Cyan.4. Power on the connected external player and start playback the Music as usual.1. Connect the Optical out jack from the external audio player (such like TV, DVD     VCR …etc.) to the OPTICAL jack on the top of unit by the Optical Connection  OPTICAL INOptical Cable ( not included )11Cable as the figure below: ( F or PCM format only )
Check the followings before requesting serviceSYMPTOM  POSSIBLE CAUSE POSSIBLE SOULTIONTROUBLESHOOTING GUIDENo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not pairedThe external device is far fromthe unitThe battery  is consumedVolume level too highBass level of the connected device too highInput source incorrectThe paired/connected device is not in payback modeVolume in minimum positionThe unit is in Standby modeConnect the power AC/DC adapter.Press the      button to turn on the unit.Raise volume level by pressing the VOL (Volume) + button.Play music/movie in the paired/connected device as usual and make sure the volume level of it is in high level.Reduce the bass level of the connecteddevice.VOL (Volume ) - button.Reduce the volume level by pressing the  Replace with new battery.Put the external BT device close to theunit.Power AC/DC adapter not connected     12Press the BASS - button on the Sound Bar to reduce bass level.Poor FM reception  Relocate and unwind the FM antenna wire.Reduce the volume level of the paired/ connected device.  Pair the unit with the BT Device as the procedures on page 9.Press the POWER/SOURCE button on the unit or press SOURCE on the remote  control repeatedly to set the input source to the desired mode.
13Power Source................................................................................... DC       16V; 1.8A,---Loud Speakers 1 x Remote Control, using CR 2025 button cell ( Included, already installed in remote control )1 x Stereo Audio Connection Cable with 3.5mm stereo plugs1 x User's Manual1 x AC/DC Adaptor  ( Input: AC 100-240V~; 50/60Hz; 1A. Output: DC     16V; 1.8 A,           ) 2 x Metallic Screws ( For Wall Mount )2 x Plastic Inserts ( For Wall Mount )---8 Ohm,10 W x 2 ..............................................................................................Loud Speakers:  10 W ( RMS ) x 2 Total:................................................................................................................................20WImpedance of Speakers: Audio Power:Bluetooth Effective Range in Open Area............................................................Up to 32 feetRemote Effective Range.....................................................................................Up to 16 feetRadio Coverage..........................................................................................FM 87.5-108 MHz............................................................................................
CHT939_WC_E0CL1_B0US

Navigation menu