Junlan Electronic CHT940X Sound bar with FM/Bluetooth Music Player User Manual CHT917BT IB English

Download:
Mirror Download [FCC.gov]
Document ID	2352636
Application ID	a8YVvLoKYPq7CyLCjOoUUw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	114.02kB (1425257 bits)
Date Submitted	2014-08-09 00:00:00
Date Available	2014-08-09 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	0000-00-00 00:00:00
Document Title	CHT917BT IB English.cdr
Document Creator	Adobe Illustrator CS3
Document Author:	Administrator

Sound Bar with FM/Bluetooth
Music Player
Model:CHT940x
FCC Warnings
WARNING:Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the
equipment and receiver.
 Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
 Consult the dealer or an experienced radio/TV
technician for help.
FCC NOTICE:
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Modifications not
authorized by the manufacturer may void user’s
authority to operate this device.
1. Insert the plug from the supplied AC/DC adaptor
to the DC In Jack on the top of unit.
2. Insert the small plug from the supplied AC Power
Cord to the AC In Jack on the AC/DC Adaptor.
To the wall outlet
To the AC In Jack
3. Insert the AC Plug from the supplied to the wall
outlet Having AC 100-240V~; 50/60Hz.
To the DC IN jack on the top of the unit.
NOTE:
If Long period of time will not use the unit, unplug the AC Cord from the wall outlet.
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.
2. Mounting the Speaker Bar onto a wall
We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
25.9 inches
2.1 Mounting on the wooden wall
You may use
25.
9 in
che
2 pieces screws
(Included)
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill the supplied screws directly into the marks that you have made on the wall
and leave approx. 0.3 inch length to hook the sound bar.
3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
2.2 Mounting on the wall
l:
tig
.M
You may use
2 pieces screws
(Included)
2 pieces plastic inserts
(Included)
1. Mark the position of the mounting screws on the wall using a pencil.
2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).
3. Insert the supplied plastic inserts into the holes by hammer ( Not Supplied ).
4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch
length to hook the sound bar.
5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
25.
9 in
(1)
(2)
che
Front View
1.Indicator
3. Speakers
3. Speakers
2. Remote Sensor
Top View
AUX IN2
FM ANT
DC
DC IN
16V, 3A
AUX IN1
POWER/
SOURCE
VOL-
VOL+
PLAY/
PAUSE
TUNE-
TUNE+
AUX IN2
FM ANT
DC
DC IN
16V, 3A
AUX IN1
POWER/
SOURCE
1. FM ANT ((FM
FM receiver
Antenna Antenna
2. AUX IN 1 jack
3. AUX IN 2 jacks
4. DC IN jack
5. POWER/SOURCE button
VOL-
VOL+
PLAY/
PAUSE
TUNE-
TUNE+
10
6. VOL- ( Volume Down ) button
7. VOL+ ( Volume Up ) button
8. PLAY/PAUSE button
9. TUNE-/
( Skip Backward ) button
10. TUNE+/
( Skip Forward ) button
7
TUNE-
TUNE+
MO/ST
SOURCE
BASS -
TREBLE-
VOL-
BASS+
TREBLE+
VOL+
EQ
10
11
6. BASS +/- buttons
7.
( Mute ) button
8. EQ ( Equalizer ) button
9.
( Play/Pause ) button
10. VOL ( Volume ) +/- buttons
11. TREBLE +/- buttons
1.
Power ON/OFF button
2. TUNE-/
( Skip Backward ) button
3. TUNE+/
( Skip Forward ) button
4. MO/ST ( Mono/Stereo ) button
5. SOURCE button
- First Time Use
Remove and discard the insulation tab as figure on the right.
- If the battery is consume, replace it as below:
1. Push and slide out the battery holder as figure 1 below.
2. Replace the battery with a new CR2025 button cell as the polarity
markings on the rear of the Remote Control.
3. Close the battery holder.
Fig.1
Fig.2
Fig.3
BATTERY PRECAUTIONS
Folloe these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc ) or old
batteries with fresh ones.
4. If the batteries in the device are consumed or device is not to be used for a long period of
time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
( Follow battery manufacturer's instructions.)
6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burn in just 2 hours and can lead to death. Keep new and used
batteries away from children. If the battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate medical attention.
Remote Sensor
30°
30°
GENERAL OPERATIONS
1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure. The Red
Indicator will light.
2. Press the POWER/SOURCE button on the unit or press the
Power button on the remote
control to power on the unit from standby mode. The color of the Indicator will turn to
correspondence color.
3. Press the POWER/SOURCE button on the unit or press SOURCE button on the remote control
repeatedly to switch to desired mode, the color of the Indicator will turn to:
Blue--------------------------------------------------------------- Bluetooh
Purple------------------------------------------------------------FM Radio
Green------------------------------------------------------------ AUX IN 1
Yellow----------------------------------------------------------- AUX IN 2
4. During Playback:
~ Press the VOL ( Volume ) + or - buttons to adjust volume level as desired.
~ Press the EQ button repeatedly to select and set equalizer mode as desired.
(To reset the EQ to normal mode; power off the unit then power on again)
~ Press the
( Mute ) button to turn off the sound. Press again to resume.
~ Press the BASS +/- buttons to adjust the sound level of bass.
~ Press the TREBLE +/- buttons to adjust the sound level of treble.
5. When finished listening, press and hold the POWER/SOURCE button on the unit or press the
button on the remote control to power off ( Standby mode ) the unit.
6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.
LISTEN TO FM RADIO
1. Connect the Sound Bar to the power as previous procedures.
2. Press the POWER/SOURCE button on the unit or the
to power on the unit.
button on the remote control
3. Press the POWER/SOURCE button on unit or press the SOURCE button on the
remote control repeatedly until the color of the Indicator turns to Purple.
or TUNE +/
buttons until the Indicator start blinking
4. Press and hold the TUNE -/
to search and plays the searched available FM station.
5. Press and release the TUNE - /
or TUNE + /
buttons repeatedly to fine tune.
6. If the available FM station is stereo, the unit will play it in stereo mode automatically.
If the reception is no good, press the MO/ST button on the remote control to switch it
to Mono mode. Press again to turn back to Stereo mode.
FM Antenna
The Antenna wire on the top of the unit is for radio reception. If reception is weak, unwind
and extend the wire or relocate the wire to improve the radio reception.
BLUETOOTH PARING AND PLAYBACK
Blue tooth
In first time use or re-pairing to new BT Device, pairing the unit to the external
BT Device as follows:
1. Power on the unit as previous procedures.
2. Press the POWER/SOURCE button on the unit or press the SOURCE button on the
remote control repeatedly until the color of the Indicator turns to Blue.
3. Power on the external BT Device and enter to searching mode. Start pairing as the on
screen instructions on the external BT Device. After paired, The Indicator will stop
blinking.
( For details pairing procedures, please refer to the user's manual of your BT Device.)
Notes:
1. When the external BT Device searched the unit, our model number
" CHT940x " will appear on the display of external BT Device.
2. Pairing code "0000" or "1234" may need to enter.
Normal operation after paired:
1. Power on the unit and selected the playback source to BT as previous procedures.
2. Turn on the BT function of the external BT Device.
3. Wait a few seconds until the unit paired to the external BT Device automatically. The
Blue indicator stop blinking.
4. Play the music in the connected BT Device as usual.
5. During playback:
~ Press the TUNE -/
or TUNE +/
buttons to skip the tracks.
~ Press the PLAY/PAUSE button on the unit or
button on the remote control to
pause. Press again to resume normal playback.
AUX IN 1 : LISTEN TO EXTERNAL AUDIO DEVICES
1. Connect the Headphone/Earphone; Aux out jack or Line out jack from the external
audio player (such like MP3 player; Discman … etc) to the AUX IN 1 jack on the top of
unit by the supplied Audio Connection Cable as the figure below:
Audio
Player
FM ANT
To Phone Jack
AUX IN1
AUX IN2
DC
2. Connect the unit to the power as previous procedures.
DC IN
16V, 3A
3. Press the POWER/SOURCE button on the unit or press the
SOURCE button on the remote control repeatedly until the
color of the Indicator turns to Green.
Top view of the unit
4. Power on the connected external player and start playback music as usual.
AUX IN 2 : LISTEN TO TV/DVD/VCR/DVR
1. Connect the Aux out jacks from the external audio player (such like TV, DVD player,
VCR …etc.) to the AUX IN 2 jacks on the top of unit by the supplied RCA Connection
Cable as the figure below:
FM ANT
AUX IN1
TV
AUX IN2
White
DC IN
16V, 3A
To Audio Out Jacks
DC
VIDEO R
Red
Top of the unit
2. Connect the Sound Bar to the power as previous procedures.
3. Press the POWER/SOURCE button on the unit or press the SOURCE button on the
remote control repeated until the Indicator turns to Yellow.
4. Power on the connected external player and start playback the Video/Music as usual.
10
TROUBLESHOOTING GUIDE
Check the followings before requesting service
SYMPTOM
No power
No sound
Sound distortion
POSSIBLE CAUSE
POSSIBLE SOULTION
Power AC/DC adapter
not connected
Connect the power AC/DC adapter.
The unit is in Standby mode
Press the
Volume in minimum position
Raise volume level by pressing the VOL
(Volume) + button.
The paired/connected device
is not in payback mode
Play music/movie in the paired/connected
device as usual and make sure the
volume level of it is in high level.
Input source incorrect
Press the POWER/SOURCE button on the
unit or press SOURCE on the remote
control repeatedly to set the input source
to the desired mode.
button to turn on the unit.
Reduce the bass level of the connected
device.
Bass level of the connected
device too high
Press the BASS - button on the
Sound Bar to reduce bass level.
Reduce the volume level by pressing
the VOL (Volume ) - button.
Volume level too high
Remote not
working
Reduce the volume level of the paired/
connected device.
The battery is consumed
Replace with new battery.
Relocate and unwind the FM antenna wire.
Poor FM reception
Bluetooth
reception failure
The external device is far from
the unit
Put the external BT device close to the
unit.
Have not paired
Pair the unit with the BT Device as the
procedures on page 9.
11
Power Source...................................................................................... DC --- 16V; 3A,
Radio Coverage..........................................................................................FM
87.5-108 MHz
Receiver
Frequency ..................................................................................
Impedance of Speakers:
Loud Speakers .............................................................................................. 6 Ohm,10 W x 2
Woofer .......................................................................................................... 6 Ohm,10 W x 2
Audio Power:
Loud Speakers: ............................................................................................10 W ( RMS ) x 2
Woofer: .........................................................................................................10 W ( RMS ) x 2
Total:................................................................................................................................40W
Bluetooth Effective Range in Open Area............................................................Up to 32 feet
Remote Effective Range.....................................................................................Up to 16 feet
1 x AC/DC Adaptor ( Input: AC 100-240V~; 50/60Hz; 1.5A Max. Output: DC --- 16V; 3 A,
1 x Remote Control, using CR 2025 button cell ( Included, already installed in remote control )
1 x Stereo Audio Connection Cable with 3.5mm stereo plugs
1 x RCA Audio Connection Cable
1 x User's Manual
2 x Plastic Inserts ( For Wall Mount )
2 x Metallic Screws ( For Wall Mount )
12
LIMITED WARRANTY
Craig warrants this product to be free from manufacturing defects in material and
workmanship under normal use for a period of 90 days from date of purchase. If service
is required, please return the product to the store where it was purchased for exchange;
or, pack the unit in the original packing material with all accessories if applicable, a copy
of your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shipping
and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please
make sure that the cashier check or money order is redeemable through a U.S. bank.
Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can
not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt
of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
To Obtain Service on your Product
email:service@craigelectronics.com
Printed in China
CHT940x_WC_E0CL1_H0US
Size: 148.5(W) x 210(H)mm (A5)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 0000:01:01 00:00:00
Modify Date                     : 0000:01:01 00:00:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creation Date--Text             : 
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Mod Date--Text                  : 
Creator Tool                    : Adobe Illustrator CS3
Metadata Date                   : 2013:05:30 12:11:20+08:00
Thumbnail Width                 : 180
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9202 bytes, use -b option to extract)
Document ID                     : uuid:1da73ac1-cb30-48ea-95e3-cb6c35e3a8ea
Instance ID                     : uuid:5038c190-a0ab-4a97-a926-b4bab644daa2
Rendition Class                 : proof:pdf
Format                          : application/pdf
Creator                         : Administrator
Title                           : CHT917BT  IB English.cdr
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 14.799981
Max Page Size H                 : 21.000014
Max Page Size Unit              : Centimeters
Font Name                       : Arial-Black
Font Family                     : Arial
Font Face                       : Black
Font Type                       : Open Type
Font Version                    : Version 2.40
Font Composite                  : False
Font File Name                  : ariblk.TTF
Plate Names                     : Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 14

EXIF Metadata provided by EXIF.tools