Junlan Electronic CHT978 2.1 CHANNEL WIRELESS HOME THEATER SYSTEM User Manual

Shenzhen Junlan Electronic Ltd 2.1 CHANNEL WIRELESS HOME THEATER SYSTEM

User manual

Model:CHT9782.1CHANNEL WIRELESS HOMETHEATER SYSTEM WITH 37 INCHSOUNDBAR2.1CHANNEL WIRELESS HOMETHEATER SYSTEM WITH 37 INCHSOUNDBAR
IMPORTANT SAFETY INSTRUCTIONSDANGEROUS VOLTAGE:The lighting flash with arrowhead symbol withinan equilateral triangle is intended to alert the user to the presence ofuninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons.ATTENTION:The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that maycause undesired operation. The antenna(s) used for this transmitter must be installed toprovide a separation distance of at least 20 cm from all persons and must not beco-located or operating in conjunction with any other antenna or transmitter.FCC NOTE:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THECOVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.Consult the dealer or an experienced radio/TV technician for help."This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operatedwith a minimum distance of 20 centimeters between the radiator and your body."
To assure continued operation, follow the attached installation instructions and use onlyshielded cables when connecting to other devices. Changes or modifications notexpressly approved by the party responsible for compliance could void the user's authorityto operate the equipment.Warning-To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.-The product must not be exposed to dripping and splashing water and no object filledwith liquids such as a vase of flowers should be placed on the product.-No naked flame sources such as candles should be placed on the product.-Batteries (a battery pack or installed batteries) should not be subjected to excessive heatsuch as sunshine, fire, etc.Caution:-Changes or modifications not expressly approved by the manufacturer could void theuser’s authority to operate this device.Caution:-Usage of controls or adjustments or performance of procedures other than thosespecified herein may result in hazardous exposure.IMPORTANT SAFETY INSTRUCTIONSBefore using the unit, be sure to read all operating instruction carefully, please note thatthese are general precautions and may not pertain to your unit. For example, this unit maynot have the capability to be connected to an outdoor antenna.1. Read these instructions – All the safety and operating instructions should be readbefore the appliance is operated.2. Keep these instructions – The safety and operating instructions should be kept forfuture reference.3. Heed all warnings – All warnings on the appliance and in the operating instructionsshould be adhered to.4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water;for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, ornear a swimming pool.6. Clean only with dry cloth – The appliance should be cleaned only as recommended bythe manufacturer.7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions. The appliance should be situated so that its location or position does notinterfere with its proper ventilation. For example, the appliance should not be situatedon a bed, sofa, rug, or similar surface that may block the ventilation openings; or placedin a built-in installation, such as a bookcase or cabinet that may impede the flow of airthrough the ventilation openings.8. Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades and a third grounding prong. The wide or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.10. Product the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments / accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, usecaution when moving the cart/apparatus combination to avoid injuryfrom tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.15. This appliance shall not be exposed to dripping or splashing water and that no objectfilled with liquids such as vases shall be placed on the apparatus.16. Power Sources – The appliance should be connected to a power supply only of thetype described in the operating instructions or as marked on the appliance. Do notoverload wall outlet.17. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.18. Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type.19. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seekadvice from your local qualified service technician or contact the distributor via thetelephone number at the back of this instruction manual.20. Caution marking and nameplate are located on back or bottom of product.
POWER SOURCE1. Insert the plug from the supplied AC/DC Adapter to the DC In Jack on the rear of unit.2. Insert the small plug from the supplied Adapter to the AC In Jack on the AC/DCAdapter.3. Insert the Adapter Plug from the supplied to the wall outlet having AC100-240V~;50/60Hz.NOTE:If Long period of time will not use the unit, unplug the Adapter Cord fromthe wall outlet.INSTALLATION1.The unit can be disassembled into two parts as the figure below:2.The unit can be re-assembled as the figure below:PLACING1. Placing on the tableWhen placing the Sound Bar and Subwoofer on an entertainment center, bookshelf, orany type of enclosed space, be sure to allow at least 2-3 inches of space around them forventilation. If they are enclosed in a tight space without ventilation, heat generated fromthem could produce a potential heat hazard.
MOUNTING2.1 Mounting on the wooden wallYou may use1. Mark the position of the mounting screws on the wall using a pencil.2. Drill the supplied screws directly into the marks that you have made on the wall andleave approx. 0.3 inch length to hook the sound bar.3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.2.2 Mounting on the concrete/brick wallYou may use1. Mark the position of the mounting screws on the wall using a pencil.2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not Supplied ).3. Insert the supplied plastic inserts into the holes by hammer ( Not Supplied ).4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inchlength to hook the sound bar.5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.2 pieces screws (Included)2piecesscrews(Included)2 pieces plastic inserts(Included)
LOCATION OF CONTROLSFront ViewTop ViewRear View
LOCATION OF CONTROLS-REMOTE CONTROL1. (Power On/Off ) Button (For main unit)2. MO/ST ( Mono/Stereo ) Button3. TUNE-/ ( Skip Backward ) ButtonTUNE+/ ( Skip Forward ) Button4. TREBLE -/+ Button5. ( Play/Pause ) Button6. (Power On/Off ) Button (For subwoofer)7. ( Mute ) Button8. BASS -/+ Button9. SOURCE button10. VOL ( Volume ) - /+ Button
BATTERY INSTALLATION ( REMOTE CONTROL)---First time usingRemove and discard the insulation tab as the figure on right.----Replacing battery for remote control1. Push and slide out the battery trap as the figure below and the rear of the remotecontrol.2. Replace the battery by a new CR2025 button cell with the polarity “+” facing up as thefigure below and the rear of remote control.3. Close the battery tray.BATTERY PRECAUTIONSFollow these precautions when using a battery in this device:1. Use only the size and type of battery specified.2. Be sure to follow the correct polarity when installing the battery as indicated in thebattery compartment, a reserved battery may cause damage to the device.3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon-zinc ) or oldbatteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a longperiod of time, remove the batteries to prevent damage or injury from possible leakage.5. Do not try to recharge the battery not intended to be recharged; it can overheat andrupture. ( Follow battery manufacturer’s instructions.)6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.7. Clean the battery contacts and also those of the device prior to battery installation.WARNINGDO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.The remote control supplied with a coin/button cell battery. If the coin button cell battery isswallowed, it can cause severe internal burns in just 2 hours and can lead to death.Keep new and used battery away from children. If the battery compartment does not closesecurely, stop using the product and keep it away from children.If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention.CAUTION!Danger of explosion if the battery is incorrectly replaced.Replace only with the same or equivalent type.
EFFECTIVE DISTANCE OF REMOTE TRANSMITTERNOTES:--when there is an obstacle between the unit and the transmitter may not operate.--when direct sunlight, an incandescent lamp, fluorescent lamp or any other strong lightshines on the REMOTE SENSOR of the unit, the remote operation may be unstable.GENERAL OPERATION1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure. The red indicator will light but unit is OFF and in standby mode.2. Press the Standby/Source button on the unit or press the button on the remotecontrol to power on the unit from standby mode. Press the (SUBWOOFER)button on the remote control to power on the wireless Subwoofer. The Indicator onwireless Subwoofer will blink, after a few seconds, the unit will be connected with thewireless Subwoofer automatically and the Indicator on wireless Subwoofer will stay lit.3. Press the Standby/Source button on the unit or press the SOURCE button on theremote control repeatedly to switch to desired mode. The color of Indicator on the unitwill turn to:Blue--------------------------------------------------------------- BluetoothGreen-------------------------------------------------------------FM RadioViolet------------------------------------------------------------------AUX 1Orange----------------------------------------------------------------AUX 2Cyan---------------------------------------------------------------Optical In4. During Playback:~ Press the VOL ( Volume ) + or - buttons on the unit or remote control to adjust volumelevel as desired.~Pressthe ( Mute ) button on remote control to turn off the sound. Press again toresume.~ Press the BASS +/- buttons on remote control to adjust the sound level of bass.~ Press the TREBLE +/- buttons on remote control to adjust the sound level of treble.5. When finished listening, press and hold the POWER/SOURCE button on the unit orpress the SOURCE button on remote control to power off ( Standby Mode ) the unit.6. If the unit will not be used for long period of time, unplug the AC/DC Adapter from theunit and wireless Subwoofer from the wall outlet.NOTE:If there is no signal received, the Blue Indicator of the wireless Subwooferwill blink. If there is signal received, the Blue Indicator of the wireless Subwooferwill stay lit.
LISTEN TO FM RADIO- Search and store the stations1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure.2. Press the Standby/Source button on the unit or press the SOURCE button on theremote control until the indicator turns Green.3.To search the band manually:Press the /TUNE+or /TUNE - button to search the bands back and forthmanually.4.To search the band automatically:Press and hold the /TUNE + or /TUNE - button to on the remote control tosearch the bands back and forth automatically, when a band searched, it will stop andplay the station.5.If the available FM station is stereo, the unit will play it in stereo mode automatically. Ifthe reception is no good, press the MO/ST button on remote control to switch to Monomode. Press again to turn back to Stereo mode.FM AntennaThe Antenna wire on the top of the unit is for radio reception. If reception is weak, unwindand extend the wire or relocate the wire to improve the radio reception.
BLUETOOTH PAIRING AND PLAYBACKBluetoothIn first time use or re-pairing to new BT Device, pairing the unit to the external BT Deviceas follows:1. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure.2. Press the Standby/Source button on the unit or press the SOURCE button on theremote control until the indicator turns Blue.3. Power on the external BT Device and enter to searching mode. Start pairing as the onscreen instructions on the external BT Device. After paired, the Indicator on the unit willstay lit.( For details pairing procedures, please refer to the user's manual of your BT Device.)Notes:1. When the external BT Device searched the unit, our model number " CHT978 " willappear on display of external BT Device.2. Pairing code "0000" or "1234" may need to enter.Normal operation afterthe first time pairing:1. Power on the unit and select the playback source to BT as previous procedures.2. Turn on the BT function of the external BT Device.3. Wait a few seconds until the unit paired to the external BT Device automatically.4. Play the music in the connected BT Device as usual.5. During playback:~PresstheTUNE-/ or TUNE +/ buttons to skip the tracks.~Pressthe button on the unit or remote control to pause. Press again to resumenormal playback.
AUX IN 1:LISTEN TO TV/DVD/VCR/DVR1. Connect the Aux out jacks from the external audio player (such like TV, DVD player,VCR …etc.) to the AUX IN 1 jacks on the rear of unit by the RCA Connection Cable as thefigure below:2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure.3. Press the Standby/Source button on unit or press the SOURCE button on remotecontrol repeatedly until the Indicator turns Violet.4. Power on the connected external player and start playback the Video/Music as usual.
AUX IN 2:LISTEN TO EXTERNAL AUDIO DEVICES1.Connect the Headphone/Earphone; Aux out jack or Line out jack from the externalaudio player (such like MP3 player; Disc-man … etc) to the AUX IN 2 jack on the rear ofunit by the Audio Connection Cable as the figure below:2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure.3. Press the Standby/Source button on unit or press the SOURCE button on remotecontrol repeatedly until the Indicator turns Orange.4. Power on the connected external player and start playback music as usual.
CONNECTION THROUGH OPTICAL1. Connect the Optical out jack from the external audio player (such like TV, DVD player…etc.) to the OPTICAL IN jack on the rear of unit by the Optical Connection Cable as thefigure below:2. Connect the AC/DC adapter of the unit and wireless Subwoofer to the wall outlet as theprevious procedure.3. Press the Standby/Source button on unit or press the SOURCE button on remotecontrol repeatedly until the Indicator turns Cyan.4.Play the music on external player as usual and set the desired volume.NOTE:If there is no audio output (only picture) when your TV or DVD player is connected to theunit, please check DVD audio setting, and set the digital output to PCM format as belowexample picture.
TROUBLESHOOTING GUIDECheck the followings before requesting serviceSYMPTOM POSSIBLE CAUSE POSSIBLE SOULTIONNo power AC/DC adapter notconnectedConnect the powerAC/DC adapter.The unit is in StandbymodePress the button to turnon the unit.No sound Volume in minimumpositionRaise volume level bypressing the VOL(Volume) + button.The paired/connecteddevice is not in paybackmodePlay music/movie in thepaired/connected deviceas usual and make surethe volume level of it is inhigh level.Input source incorrect Press the Standby/Sourcebutton on the unit or pressSOURCE on the remotecontrol repeatedly to setthe input sourceto the desired mode.Sound distortionBass level of theconnected device too highReduce the bass level ofthe connected device.Press the BASS - buttonon the Sound Bar toreduce bass level.Volume level too high Reduce the volume levelby pressing the VOL(Volume ) - button.Reduce the volume levelof the paired/connected device.Remote not working The battery is consumed Replace with new battery.Poor FM reception Relocate and unwind theFM antenna wire.Bluetoothreception failureThe external device is farfrom the unitPut the external BTdevice close to the unit.Have not paired Pair the unit with the BTDevice as the procedures.
GENERAL SPECIFICATIONSPower Source of the Main Unit........................................................... DC 12V 2APower Source of the Subwoofer..................................................... DC 24V 2.5ARadio Coverage.............................................................................................87.5-108 MHzImpedance of Speakers:Loud Speakers .......................................................................................... 8 Ohm,10 W x 2Woofer ...........................................................................................................8 Ohm, 50 WAudio Power:Loud Speakers: ........................................................................................10 W ( RMS ) x 2Subwoofer: .....................................................................................................45W ( RMS )Total:.............................................................................................................................65WBluetooth Effective Range in Open Area..........................................................Up to 32 feetRemote Effective Range...................................................................................Upto 16 feetACCESSORIES1 x AC/DC Adapter of the Main Unit:( Input: AC 100-240V~; 50/60Hz; 0.6A Max. Output: DC12V 2A, )1 x AC/DC Adapter of the Subwoofer:( Input: AC 100-240V~; 50/60Hz; 1.5A Max. Output: DC24V 2.5 A, )1 x Remote Control, using CR 2025 button cell ( Included, already installed in remotecontrol )1xUser'sManual1 x RCA Line In Cable2 x Plastic Inserts ( For Wall Mounting )2 x Metallic Screws ( For Wall Mounting )
Size: 148.5(W) x 210(H)mm (A5)Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China LIMITED WARRANTYCHT978_WC_E0CL1_H0US

Navigation menu