Junlan Electronic PSB322 SOUNDBAR PLAYER User Manual

Shenzhen Junlan Electronic Ltd SOUNDBAR PLAYER

User manual

32" SOUND BAR SPEAKERUSER MANUALModel:PSB322 PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
SAFETY INSTRUCTIONS1.Read these instructions.2.Keep these instructions.3.Heed all warnings.4.Follow all instructions.5.Do not use this apparatus near water.6.Clean only with a slightly damp cloth.7.Do not block any ventilation openings.8.Install in accordance with the manufacturer’s instructions.9.Do not install or operate near any heat sources such as radiators,stoves,or other apparatusthat produce heat10.Unplug this apparatus during lightning storms or when unused for long periods of time.11.Servicing is required when the apparatus has been damaged in any way, such as thepower-supply cord or plug is damaged,liquid hasbeenspilledorobjectshavefallenintotheapparatus,the apparatus has normally, or has been dropped.Warning:D o not expose this product to rain or moisture. The product must not be exposed to drippingsplashing and no object filled with liquids should be placed on the product.Caution:Changes or modifications not expressly approved by the manufacturer could void the user’sauthority to operate this device.Caution:Usage of controls or adjustments or herein may result in hazardous exposure.Refer all servicing to qualified service personnel.Caution:To reduce the risk of fire or electrical shock.No fire sources such as candles should beplaced on the products.1
FCC NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.The antenna(s) used for this transmitter must be installed to provide a separation distance of atleast 20 cm from all persons and must not be co-located or operating in conjunction with any otherantenna or transmitter.2
MOUNTING1. Follow the figure 1 above to determine the positions where the screws should be mounted.Make sure the two brackets are mounted in the same level.2. Insert the fixing plugs into the screw holes and insert screws to fix the metal bracket onto thewall.3
3. Hang the unit on the wallNote:The gap between the metal bracket and plastic mounting holder on the rear of the unit is designedfor simple mounting, which will make the unit movable.4
PRODUCT OVERVIEWFront View1. LCD Display 6. Remote Sensor3. Tune- Button 8. Volume- Button4. Tune+ Button 9. SpeakersRear View512346789TUN- TUN+VOL- VOL+AUX IN 1MODETUN- TU N+VOL- VO L+AUX IN 1MODE52. Standby/MODE ButtonJackIN1ANTRLAUX 2RLAUX IN2DC INA1212090750000001S/N:A1 2 1 2 0 9 0 7 5 0 0 0 0 0 0 0 110 11 11 12ANTRLAUX 2RLAUX IN2DC IN12.FM Antenna11.RCA Audio Input Jacks10.DC IN Jack5. AUXButton7. Volume+
Remote Control4. TUNE-Button 9. TREBLE- Button 15. Play/Pause ButtonBATTERY INSTALLATION- Before installationRemove and discard the insulation tab.-Replace battery for the remote control1. Push and slide out the battery holder as Figure 1 below.2. Replace the battery with a new CR2025 button cell with the polarity (+) side upward.3. Slide into the battery holder.Battery precautions• Never recharge the batteries, apply heat to them or take them apart.• Battery shall not be exposed to excessive heat such as sunshine, ire or the like.• Do not throw the batteries in ire!• Attention should be drawn to the environmental aspects of battery disposal.• If the remote control is not going to be used for a long time, remove the batteryto avoid damage caused by battery leakage corrosion.62357VOL+FM SCAN TUN- M+ EQ VOL-BASS- BASS+TREBLE- TREBLE+ TUN+ 8946110111213141615CLOCKMO/STMODEButton on Button6. EQ Butt1.MODE2. Standby Button 7. VOL-(Volume-) Button 13. VOL+ (Volume+) Button5. M+(Memory+) Button 10. Mute Button 16. TREBLE+ Button11. TUNE+ Button12. CLOCK/MO/ST3. FM SCAN Button 8. BASS- Button 14. BASS+ Button
POWER CONTROL- To turn the unit on··Press STANDBY button to turn on the unit.- To turn the unit off·Press STANDBY button on the remote control or hold STANDBY button in the front of the unit.NOTE:If the unit is not used for a long period of time, disconnect the power adapter.TIME SETTING1. Place the unit to standby mode.2. Hold CLOCK/MO/ST button on the remote control until the hour digit flashes.3.Then press TUNE+ or TUNE- button on the unit or remote control to adjust the hour.4. Press CLOCK/MO/ST button on the remote control to confirm the hour setting and the minutedigit will flash.5. Then press TUNE+ or TUNE- button on the unit or remote control to adjust the minute.6. Press CLOCK/MO/ST button on the remote control to confirm the minute setting.FM RADIOdisplay.- Search and store the stations1. Hold TUNE+ or TUNE- button to search stations forward or backward. The unit will stop if astation is found. Then press FM SCAN button, “CH XX” will flash and then use M+ button toselect the place you want the station stored to. Press FM SCAN button to confirm. Or2. Hold FM SCAN button then release the unit will search and store the stations automatically.- Listen to the preset stationsPressM+buttonrepeatedlytoselectthedesiredpresetstationstolistento.NOTE:If the received FM stations are in stereo mode, the unit will play in stereo mode automatically.Ifreception is weak, press the CLOCK/MO/ST button to turn the unit to mono mode. Press again toturn to stereo mode again.7MODEPower on the unit and press button repeatedly until the FM frequency appears on theConnect the supplied power adapter.
AUX IN- AUX IN source may include:·Personal audio players·Personal computers or laptops- AUX IN connection:1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or LINE/Audio output ofSet your personal audio player/computer to play.NOTE: If there is no sound or if the volume is not loud enough, you may increase the setting onthe source.- During playback·Press MUTE button to turn off the sound. Press again to resume the sound.·Press VOLUME+/- buttons to adjust the volume level.·Press BASS+/- buttons to adjust bass level.·Press TREBLE+/-buttons to adjust treble level.·Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.8MODE2.Power on the unit and press button repeatedly until "AUX1" appears on the display.POWERRESETComputerMP3Supplied audio connection cable To AUX IN 1 JackConnect to the output socket of external audio devices (MP3,Computer,ext.)on the unitTUN- T UN +VOL- V OL +AUX IN 1MODEthe personal audio player and the jack on the front of the unit.AUX IN1
·TV/DVD/VCR1. Connect the RCA audio cable (supplied) to the audio output jack on DVD player and AUX INNOTE:- During playback·Press MUTE button to turn off the sound. Press again to resume the sound.·Press VOLUME+/- buttons to adjust the volume level.·Press BASS+/- buttons to adjust bass level.·Press TREBLE+/-buttons to adjust treble level.·Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.9RCA AUX IN-RCA AUX IN sources may include-RCA AUX IN connection2. Press MODE button repeatedly until orappears on the display.AUX IN1 jack in the front of the unit.RLAUX 2RLAUX IN2AUX 2WhiteRed2or jack on the rear of the unit.BeforeAUX IN 2 connection, make sure theAUX IN cable is not inserted into theAUX 2"AUX1" (for connection) (forAUX "AUX 2" AUX 2IN 2connection)
BLUETOOTH- Paring:2. Turn off the Bluetooth functionality of other devices that are paired with your unit.3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls arefound on the device’s tools or settings menu (see your user manual).Turn on Bluetoothconnectivity and make your device “discoverable”.4. Clean out the paring list on your Bluetooth device.5. Choose “add a new Bluetooth device”or “setup Bluetooth device”on your device. It will start toplease enter 0000. If the pairing attempt fails or times out, please start pairing procedure again.”- During playback:Make sure the Bluetooth connection between the unit and the device is activated.·Press PLAY/PAUSE button to suspend momentarily the playing track. Press again to resumeplaying.·PressTUNE+buttontoskipforwardtothenexttrackandTUNE-buttontoskipbackwardtotheprevious track.·Press MUTE button to turn off the sound. Press again to resume the sound.·Press VOLUME+/- buttons to adjust the volume level.·Press BASS+/- buttons to adjust bass level.·Press TREBLE+/-buttons to adjust treble level.·Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.101.Press MODE button repeatedly until "BT" appears on the display.search. Once “PSB322” shows on your device, select it. If your device prompts you for a pass code,6. After your device and the “PSB322 have connected each other “Du” sound can be heard., a
SPECIFICATIONSPower source of the remote control................................................ DC 3V, 1x CR 2025 button cellAudio output........................................................................................................................ 10W x 2Power consumption....................................................................................................................25WBluetooth working range............................................................................................................10M0MHzACCESSORIES1 x Instruction manual1 x Remote control1 x CR 2025 button cell (Already installed in the remote control)1 x Stereo audio connection cable with 3.5mm stereo plug1 x RCA audio cable2 x Wall-mount metal brackets4 x Screws11Output of the power adapter....................................................................................... .DC 16V 1.8A1 x Power adapterFMcoverage............................................................................................................ 88.0-108.

Navigation menu