Junlan Electronic SBB080FG STEREO SOUNDBAR User Manual
Shenzhen Junlan Electronic Ltd STEREO SOUNDBAR
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3254322 |
| Application ID | /An4Q8P0DFduDrntBTsNTQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.77kB (634629 bits) |
| Date Submitted | 2017-01-11 00:00:00 |
| Date Available | 2017-01-11 00:00:00 |
| Creation Date | 2017-01-06 09:42:45 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2017-01-09 11:46:13 |
| Document Title | Microsoft Word - SBB-081FG English Manual_0__2_.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
Stereo Soundbar Model: ITSB-201-37 AUX TUN- TUN+ VOL- VOL+ SOURCE Instruction Manual Please read this instruction manual carefully and keep it for future reference. 2016.09. 10 16:59:34 +08'00' CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: CAUTION: may result in hazardous radiation exposure. WARNING: compliance could void the user’s authority to operate the equipment. WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface. WARNING: CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING : Shock hazard - Do Not Open. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the wall outlet completely. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. moisture. for the remote. it may be the cause. CAUTION ATTENTION WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may electric shock to persons. SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Extended exposure to temperatures higher that 170 degrees Fahrenheit, for example inside a closed vehicle during the summer, may result in damage to your product. 9. No open flame sources, such as lighted candles, should be placed on the apparatus. 10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. 11. Protect the power cord from being walked on or pinched – particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 12. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times. 13. Power source – Use only power supplies of the type specified in the operating instructions or as marked on the appliance. If a separate power supply is included with this apparatus, do not substitute with any other power supply – use only manufacturer-provided power supplies. 14. Unplug this apparatus during lightning storms or when unused for long periods of time. 15. If the unit will be unused for long periods of time, the batteries should be removed. 16. Do not place this product on an unstable surface. The product may fall, causing injury to a child or adult and damage to the product. Use only with a stand, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 17. Move the appliance with care to avoid damage or injury. 18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damages in any way: the power-supply cord or plug is damages, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 19. For products which incorporate batteries, please refer to local regulations for proper battery disposal. Warning: Shock, do not expose this product to rain or moisture. The product must not be exposed to dripping water and water placed on the product can be dangerous. Caution: Changes or modifications not approved by the manufacturer could void the user’s authority to operate this device. Usage of controls or adjustments or herein may result in hazardous exposure. Refer all servicing to qualified service personnel. To reduce the risk of electrical fire. No fire sources such as candles should be placed near the unit and no object filled with liquids should be placed on the product. CALIFORNIA PROP 65 WARNING ĀWARNINGāThis product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website: http://www.oehha.ca.gov/prop65.html INCLUDED IN THIS PACKAGE 1 x Bluetooth® Stereo Soundbar 1 x Power adapter 1 x Instruction manual 1 x Remote control 1 x CR 2025 button cell 1 x 3.5mm aux in cable 1 x RCA audio cable 2 x Wall mount brackets 4 x Screws 4 x Wall anchors PRODUCT OVERVIEW Front View AUX AUX TUN- TUN+ TUN- TUN+ VOL- VOL+ SOURCE VOL- VOL+ 1. AUX IN jack 4. Remote sensor 2. Tune down / previous Tune up / next 3. LCD display 5. Volume - (volume down) Volume + (volume up) 6. Source / Standby button SOURCE Rear View 1. Optical audio input 2. AUX IN jack 3. FM antenna 4. DC IN jack Remote Control 10 11 12 13 14 15 1. Source Button 2. Standby Button 3. FM SCAN Button 4. TUNE - Button / Previous Track 5. M + (Memory +) Button 6. EQ Button 16 7. VOL – (Volume –) Button 8. BASS – Button 9. Treble – Button 10. Mute Button 11. TUNE + Button / Next Track 12. CLOCK / MO / ST Button 13. VOL + (Volume +) Button 14. BASS + Button 15. Play / Pause Button 16. TREBLE + Button WALL MOUNTING INSTRUCTIONS 27” + 0.125” – 0.125” Metal Bracket Metal Bracket 1. Using figure 1 above as a guide, measure the Stereo Soundbar to determine the position of where the metal brackets and screws should be mounted on the wall. Make sure the two brackets are mounted at the same level. Wall Anchors Metal Bracket Screws 2. Insert the wall anchors into the screw holes and then insert the screws to fix the metal brackets onto the wall. Stereo Soundbar Wall (side view) Metal Bracket 3. Carefully hang the Stereo Soundbar onto the wall. Note: The gap between the metal bracket and plastic mounting holder on the rear of the unit is designed for simple mounting, and allows for the unit to be movable. BATTERY INSTALLATION - Before installation Remove and discard the insulation tab. Out of the box the Remote Control has a battery and will be usable after the tab is removed. - How to replace battery for the remote control 1. Push and slide out the battery holder as shown below. 2. Replace the battery with a new CR2025 button cell with the polarity (+) side upward. 3. Slide the battery holder back into the remote control. Battery precautions Never recharge the batteries, apply heat to them or take them apart. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not throw the batteries in fire! Attention should be drawn to the environmental aspects of battery disposal. If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion. POWER CONTROL - To turn the unit ON · Connect the supplied AC/DC adapter. · Press the STANDBY button to turn ON the unit. - To turn the unit OFF · Press STANDBY button on the remote control or hold STANDBY button on the front of the unit. NOTE: If the unit is not used for a long period of time, disconnect the power adapter. TIME SETTING 1. Switch the unit to standby mode. 2. Hold CLOCK/MO/ST button on the remote control until the hour digit flashes. 3.Then press TUNE+ or TUNE- button on the unit or remote control to adjust the hour. 4. Press CLOCK/MO/ST button on the remote control to confirm the hour setting and the minute digit will flash. 5. Then press TUNE+ or TUNE- button on the unit or remote control to adjust the minute. 6. Press CLOCK/MO/ST button on the remote control to confirm the minute setting. NOTE: When disconnecting the power adapter, the setting will be canceled. Time has to be reset next time. FM RADIO Power ON the unit and press the SOURCE button until the FM frequency appears on the display. - Search and store the stations 1. Hold TUNE+ or TUNE- button to search through stations forward or backward. The unit will stop if a station is found. Then press FM SCAN button, “CH XX” will flash and then use M+ button to select the place you want the station stored to. Press FM SCAN button to confirm. Or; 2. Hold FM SCAN button then release. The unit will search and store the stations automatically. - Listen to the preset stations Press M+ button repeatedly to select the desired preset stations to listen to. NOTE: If the received FM stations are in stereo mode, the unit will play in stereo mode automatically. If reception is weak, press the CLOCK/MO/ST button to turn the unit to mono mode. Press again to turn to stereo mode. 3.5mm AUX IN (Front of Unit) - 3.5mm AUX IN source may include: gMP3 player, smartphones, tablets, computers or laptops - 3.5mm AUX IN connection: 1. Connect a 3.5mm aux in cable (supplied) between the headphone or AUX/Audio output of the personal audio player and the 3.5mm AUX IN jack on the front of the unit. 2. Power ON the unit and press SOURCE button repeatedly until “AUX” appears on the display. Set your personal audio player/computer to play. NOTE: If there is no sound, or if the volume is not loud enough, you may need to increase the volume on the audio source. 3.5mm AUX IN jack on Stereo Soundbar Connect to the 3.5mm Audio Out jack of external audio devices including Tablets, Laptops, Smartphones, MP3 Players, etc. AUX VOL- TUN- TUN+ VOL+ SOURCE 3.5mm Aux In Cable (Included) - During playing gPress MUTE button to turn off the sound. Press again to resume the sound. gPress VOLUME+/- buttons to adjust the volume level. gPress BASS+/- buttons to adjust bass level. gPress TREBLE+/-buttons to adjust treble level. gPress EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL. RCA AUX IN (Back of Unit) - RCA AUX IN sources may include gTV/DVD/VCR - RCA AUX IN connection 1. Connect the RCA audio cable (supplied) to the audio output jack on TV/DVD/VCR/Etc. and the AUX IN jack on the rear of the unit. 2. Press SOURCE button repeatedly until “AUX” appears on the display. NOTE: Before using the RCA AUX IN connection, make sure the 3.5mm aux in cable is not inserted into the 3.5mm AUX IN jack. If it is, audio will play from the audio source connected to the 3.5mm AUX IN jack, NOT the RCA AUX IN jack. AUX IN Jacks of Stereo Sounbar Audio Out Jacks of TV/DVD/VCR/DVR AUX BLUETOOTH - Pairing: 1.Press SOURCE button until "BT" appears on the display. 2. Turn ON Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found in the device’s tools or settings menu (see your user manual). Turn ON Bluetooth connectivity and make your device “discoverable”. 3. Choose “add a new Bluetooth device” or “setup Bluetooth device” on your device. It will start to search. Once “Stereo Soundbar” appears on your device, select it. If your device prompts you for a pass code please enter “0000”. If the pairing attempt fails or times out, please start the pairing procedure again. 5. After your device and the “Stereo Soundbar” have connected to each other, sound can be heard. NOTE: The unit will automatically reconnect the last paired device when Bluetooth mode is reselected from other mode. If for some reason the Bluetooth connection is lost due to external factors, or will not auto reconnect, you must clear the “Stereo Soundbar” from your Bluetooth Devices list and begin the pairing process again. - During playing: Make sure the Bluetooth connection between the unit and the device is activated. gPress PLAY/PAUSE button to suspend momentarily the playing track. Press again to resume playing. gPress TUNE + button to skip forward to the next track and TUNE - button to skip backward to the previous track. gPress MUTE button to turn off the sound. Press again to resume the sound. gPress VOLUME +/- buttons to adjust the volume level. gPress BASS +/- buttons to adjust bass level. gPress TREBLE +/- buttons to adjust treble level. gPress EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL. OPTICAL IN - Connecting 1. Press SOURCE button until "OPTI" appears on the display. 2. Follow the figure below to make connections. NOTE: Not all entertainment systems are set up the same way. The diagram below is only one example of how the connection can be made. Optical Out of TV/DVD/Etc. (referred to as “Digital Out” on some devices) OPTICAL OUT Optical Cable (not included) AUX FM ANT DC 16V OPTICAL IN Optical In jack on rear panel of Stereo Soundbar NOTE: OPTICAL IN is only for PCM format. 10 SPECIFICATIONS Power source of the remote control................................................ DC 3V, 1x CR 2025 button cell Output of the power adapter...................................................................................... DC 16V, 1.8A Audio output........................................................................................................................ 10W x 2 Power consumption................................................................................................................... 25W Bluetooth working range................................................................................................ 33FT (10M) FM coverage............................................................................................................ 87.5-108.0MHz Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, incl uding interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 11 Innovative Technology Electronics Corp, Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit) USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit) USD$16.00, for items $100.00 and up. (Price Paid Per Unit) Shipping fees are non-refundable to be payable to Innovative Technology Electronics Corp. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information. Send all inquiries or RMA request via our website www.ithomeproducts.com/support. Innovative Technology Electronics Corp. 1 Channel Drive Port Washington, NY 11050 Toll free: 1-877-483-2497 Website for support: www.ithomeproducts.com/support There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHOULD NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2017:01:06 09:42:45+08:00 Modify Date : 2017:01:09 11:46:13+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2017:01:09 11:46:13+08:00 Thumbnail Width : 148 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7759 bytes, use -b option to extract) Format : application/pdf Title : Microsoft Word - SBB-081FG English Manual_0__2_.doc Creator : Administrator Document ID : uuid:795b6034-f152-4010-bb38-144a703f9f28 Instance ID : uuid:59502912-2429-490c-9122-3c3ce7a05ff6 Rendition Class : proof:pdf N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 8.266941 Max Page Size H : 11.694444 Max Page Size Unit : Inches Font Name : ArialMT, TimesNewRomanPSMT, TimesNewRomanPS-BoldMT Font Family : Arial, Times New Roman, Times New Roman Font Face : Regular, Regular, Bold Font Type : Open Type, Open Type, Open Type Font Version : Version 5.01.2x, Version 3.05, Version 3.05 Font Composite : False, False, False Font File Name : Arial.ttf, Times New Roman, Times New Roman Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Page Count : 13EXIF Metadata provided by EXIF.tools