Junlan Electronic SBB61682 32 inch SOUNDBAR User Manual

Shenzhen Junlan Electronic Ltd 32 inch SOUNDBAR

User Manual

Please read this instruction manual carefully and keep it for future reference32'' Bluetooth SoundbarMODEL:PSB3200-FD-PL
IMPORTANT SAFETY INSTRUCTIONSDANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within anequilateral triangle is intended to alert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock to persons.ATTENTION: The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and maintenance (servicing)instructions in the literature accompanying the appliance.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that maycause undesired operation. The antenna(s) used for this transmitter must be installed toprovide a separation distance of at least 8 ft. from all persons and must not be co-locatedor operated in conjunction with any other antenna or transmitter.FCC NOTE:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THECOVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.2
-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.-- Consult the dealer or an experienced radio/TV technician for help.To assure continued operation, follow the attached installation instructions and use onlyshielded cables when connecting to other devices. Changes or modifications notexpressly approved by the party responsible for compliance could void the user's authorityto operate the equipment.WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNITTO RAIN OR MOISTURE.WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD.Thisunit has a long cord that can be easily tripped on or pulled on, causing injury. Please makesure it is arranged so that it will not drape over a tabletop, etc., where it can be pulled onby children or tripped over accidentally.IMPORTANT SAFETY INSTRUCTIONSBefore using the unit, be sure to read all operating instructions carefully. Please note thatthese are general precautions and may not pertain to your unit. For example, this unit maynot have the capability to be connected to an outdoor antenna.1. Read these instructions – All the safety and operating instructions should be readbefore the appliance is operated.2. Keep these instructions – The safety and operating instructions should be kept forfuture reference.3. Heed all warnings – All warnings on the appliance and in the operating instructionsshould be adhered to.4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water;for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,or near a swimming pool.6. Clean only with dry cloth – The appliance should be cleaned only as recommendedby the manufacturer.7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions. The appliance should be situated so that its location or position does notinterfere with its proper ventilation. For example, the appliance should not besituated on a bed, sofa, rug, or similar surface that may block the ventilationopenings; or placed in a built-in installation, such as a bookcase or cabinet that mayimpede the flow of air through the ventilation openings.8. Do not install near any heat sources such as radiators, heat registers, stoves, orother apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades and a third grounding prong. The wide or the third prong are-- Reorient or relocate the receiving antenna.3
provided for your safety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments / accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, usecaution when moving the cart/apparatus combination to avoid injuryfrom tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods oftime.14. Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.15. This appliance should not be exposed to dripping or splashing water and no objectfilled with liquids such as vases should be placed on the apparatus.16. Power Sources – The appliance should be connected to a power supply only of thetype described in the operating instructions or as marked on the appliance. Do notoverload wall outlet.17. Battery should not be exposed to excessive heat such as sunshine, fire, etc.18. Replace remote control battery only with the same or equivalent type.19. Do not attempt to dismantle, open or repair this product yourself. If a problem occurs,seek advice from your local qualified service technician or contact the distributor atthe telephone number at the back of this instruction manual.20. Caution marking and nameplate are located on back or bottom of product.4
PLACEMENT AND MOUNTING1. Placing the device on table - VentilationWhen placing the Sound Bar on an entertainment center, bookshelf, or any type ofenclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar forventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heatgenerated from the Sound Bar could produce a potential heat hazard.5
Mounting to a wall2.1 Mountingto a wooden wallA. Mark the position of the mounting screws on the wall using a pencil.C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.2.2 Mountingto a brick wallA. Mark the position of the mounting screws on the wall using a pencil.E. Put the sound bar onto the mounting screws. Make sure they are firm and stable.627.6 inches27.6 inchesB. Drill the screws directly into the marks that you have made on the wall andleave approx. 0.3 inches length to hook the sound bar.screws not includedscrews and plastic fixing plug are not includedB. Drill 2 holes on wall with a powerful electric drill (not included). C. Insert the fixing plug and hammer into the holes.D. Secure the screws into the fixing plug and leave approx. 0.3 inches lengthto hook the sound bar.
Vol+Vol-Standby/SourcePlay/PauseAUX IN LRDC 9VLINE I NLOCATION OF CONTROLS:Front View7Top View1. Indicator2. Remote sensor3. Speaker 3. Speaker4. AUX IN jack 5. LINE IN jacks 6. DC IN jack7. Standby/Source button8. Play/Pause button 9. Volume down button10. Volume up buttonAUX IN LRDC 9VLINE INVol+Vol-Standby/SourcePlay/PauseRear View
REMOTE CONTROL8STANDBY12345867STANDBY button(Mute) button(Previous) button4.5.6.7.8.(Play/pause) buttonVOL - (Volume down) button2.1.3. SOURCE button(Next) buttonVOL + (Volume up) button
FIRST TIME USE●Remove and discard the insulation tab as figure on the right.●Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.2. Replace the battery with a new CR2025 button cell as the polaritymarkings on the rear of the Remote Control.3. Close the battery holder.BATTERY PRECAUTIONSFollow these precautions when using a battery in this device:1. Use only the size and type of battery specified.2. Be sure to follow the correct polarity when installing the battery as indicatedin the battery compartment, a reserved battery may cause damage to the device.3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon -zinc )or old batteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a longperiod of time, remove the batteries to prevent damage or injury from possibleleakage.5. Do not try to recharge the battery not intended to be recharged; it can overheatand rupture. ( Follow battery manufacturer’s instructions.)6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.7. Clean the battery contacts and also those of the device prior to battery installation.8. The remote control supplied with a coin/buttoncell battery. If the coin button cell battery isswallowed, it can cause severe internal burns injust 2 hours and can lead to death. Keep newand used battery away from children. If theBattery compartment does not close securely,stop using the product and keep it away fromchildren. If you think batteries might have beenswallowed or placed any part of the body, seekimmediate medical attention.CR2025Fig.1 Fig.2 Fig.3BATTERY INSTALLATION OF REMOTE CONTROLRemote control operation range●When there is an obstacle between the remote and the transmitter, the unit may notoperate.●When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong lightshines on the REMOTE SENSOR of the unit, the operation of the remote may beunstable.CAUTION●Danger of explosion if the battery is incorrectly replaced.●Replace only with the same or equivalent type.9
GENERAL OPERATION1. Connect the AC/DC adapter to the unit and wall outlet. The red indicator will~ Press the VOL ( Volume ) + or - buttons on the unit or Remote Control toadjust volume level as desired.~ Press the ( Mute ) button on the Remote Control to turn off the sound. Pressagain to resume.Violet..................................................................................AUX Mode Blue............................................................................Bluetooth Mode2. Press and hold the Standby/Source button on the unit or press the STANDBY 3. During Playback:10light and the unit is in standby mode.button on remote control to turn on the unit. Press the Standby/Source button on the unit or press the SOURCE button on remote control repeatedly to switch to desired mode. The color of indicator will turn to :button on remote control to put the unit in standby mode.4. When finishing listening, press and hold the Standby/Source button on the unit or press the STANDBY
BLUETOOTH PAIRING AND CONNECTIONFor first time use or re-pairing, pair the unit to an external Bluetooth (BT) deviceas follows:1. Power ON the unit as previously explained.3. Power ON the external BT Device and select Bluetooth to enter into search( For details on pairing procedures, please refer to the user's manual of your BTDevice.)~ Press the112. Press the Standby/Source button on the unit or press the SOURCE button~ button to pause. Press again to resume normal playing. on remote control repeatedly until the indicator turns Blue, and a voice tone sounds "Bluetooth Mode".mode. when appears, click it to start pairing.PROSCANAfter paired, the indicator will stop blinking and a voice tone sounds "Paired"." "4. During playing:~ Press the or button to skip tracks.~~ Press the VOL - or VOL + button to adjust volume level.Normal operation after first pairing:time1. Power on the unit and select the Bluetooth mode as above stated.2. Activate the Bluetooth function on external Bluetooth device.4. Play the music as above stated.3. Wait a few seconds until the unit automatically connect to the external Bluetooth device.
An external (Auxiliary) audio source (ie.,personal CD player or MP3 player) canbe connected to this unit and heard through the speakers.3. Power on the unit as previously explained.Audio PlayerTo Audio Out JackRear view of the unit121. Plug one end of the Aux In cable into the AUX IN jack on the rear of the unit.on the Remote Control repeatedly until the color of Indicator turns to4. Press the Standby/Source button on the unit or press the SOURCE buttonViolet, and a voice tone sounds " AUX Mode". LISTEN THROUGH AUX IN2. Plug the otehr end of the Aux In cable into the AUX OUT or LINE OUT jackof the external audio source.AUX IN LRDC 9VLINE IN5. Power on the connected external player and start playing as usual.jacks are connected with external player separately.NOTE: AUX MODE is default to AUX IN function when both AUX IN and LINE IN
An external Video/Audio player (such as TV, DVD player, VCR, etc.) can beconnected to this unit and heard through the speakers.NOTE: Make sure to connect to AUDIO OUT. If you connect it into AUDIO IN ofexternal device, you will not hear the sound.13Rear view of the unit1. Plug one end of RCA White and Red cable into the LINE IN jacks on the rear of the unit.Audio out jacks of TV/DVD/VCR/DVR etc LISTEN THROUGH INAUX IN LRDC 9VLINE INLRV2. Plug the other end of RCA White and Red cable into audio out jacks of TV or external device as the illustration shown as below.3. Power on the unit as previously explained.on the Remote Control repeatedly until the color of Indicator turns to4. Press the Standby/Source button on the unit or press the SOURCE buttonViolet, and a voice tone sounds " AUX Mode".5. Power on the connected external player and start playing as usual.please do not insert the AUX IN cable into the AUX IN jack of the unit.NOTE: AUX MODE is default to AUX IN function, when using LINE IN function, LINE
TROUBLESHOOTING GUIDEPROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONNo power Power AC/DC Adapternot connectedConnect the power AC/DC adapterto the unit or wall outlet.Standby mode.No sound Volume in minimum position Raise volume level by pressing theVOL (Volume) + button.The paired/connected device is not in Play music/movie in the paired/connected device as usual and makesure the volume level of it is in highlevel.on the unit or SOURCE button on theRemote Control repeatedly to set theinput source to the desired mode.Sound distortion/rattle Volume level too high Reduce the volume level by pressingthe VOL (Volume ) - button.Reduce the volume level of thepaired/connected device.Remote Control not working The battery is weak Replace with new battery.Bluetoothreception failureThe external device is too far from theunitPut the external BT device close to theunit.Have not paired Pair the unit with the BT Device as theprocedures stated in this manual.14Input source incorrect Press the Standby/Source buttonThe unit is in standby modeplaying modePress and hold Standby/Source buttonon the unit or press button on remote control to turn on the unit from
GENERAL SPECIFICATIONSPower Input....................................................... ...........AC 100-240V~; 50/60HzBluetooth Effective Range in Open Area.........................................Up to 32 feetRemote Effective Range..................................................................Up to 16 feetSPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGEWITHOUT NOTICE15is a trademark on a registered trademark of BluetoothSIG Inc. All other trademarks and trade names are those of their respective owners.Power Output...............................................................9V 1300mAAudio Power.............................................................................................5W x 2(tested in open area)1 x AC/DC Adapter1 x Remote Control1 x AUX IN Cable1 x LINE IN Cable1 x User's ManualACCESSORIES
LIMITED PRODUCT WARRANTYThis quality product is warranted to be free from manufacturer’s defects in material and workman-ship,provided that the unit is used under the normal operating conditions intended by the manufacturer.Should you have any problem with this product, please and it is highly recommended to visit our website atwww.curtisint.com before you take any other steps as we have additional copies of instruction manuals,operating manuals and trouble shooting tips on our website which gives you the answer on most of thequestions you could have in operating the unit.TERMS OF WARRANTYC.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days onparts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair feemay apply.Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any itemsplaced in this product, whether due to any defect of the product, or its use, whether proper or improper.EXCLUSIONSSave as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no otherwarranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or itsauthorized distributors and all other warranties, conditions, representations or guarantees, including anywarranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation orstatue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. ServiceDept. (USA), shall not be responsible for any damages to persons or property, including the unit itself,howsoever caused or any consequential damages arising from the malfunction of the unit and by thepurchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claimfor damages to persons or property caused by the unit.TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY1. The original purchaser must present a copy of the original bill of sale and the service warranty card.2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.3. The warranty does not cover cabinets and accessories.4. No warranty or insurance contained or set out shall apply when damage or repair is caused by powerfailure; damage in transit or when moving the unit; improper power supply; use for commercial orindustrial purposes; service calls resulting in customer education, etc.5. The defective product should be mailed to:CanadaU.S.AC.I. Service Dept.Curtis International Ltd315 Attwell DriveToronto, ONM9W 5C1c/o Lotus International Company6880 Commerce Blvd.Canton MI 48187U.S.A.For service assistance and product information, please call: 1-800-968-9853.If mailing the product, the freight must be prepaid and a money order for $7.00 should be includedto cover the cost of insurance and the return of the product.6. C.I. reserves the right to repair or replace the parts which have become defective.Model No.Date PurchasedSerial No.

Navigation menu