Junlan Electronic SBB62688 26 inch Sound bar User Manual 1

Shenzhen Junlan Electronic Ltd 26 inch Sound bar 1

User Manual

AUX IN USBA PAIRBMODEL: SB-26--INSTALLATION AND OPERATION MANUAL--PLEASE READ INSTRUCTIONS CAREFULLYAND KEEP FOR FUTURE REFERENCE
TABLE OF CONTENTS1514131311129941116810752-3INTRODUCTION......................................................................................PageFEATURES..............................................................................................PagePACKING LIST........................................................................................ PagePLACING AND MOUNTING.....................................................................PageIMPORTANT SAFETY INSTRUCTIONS............................................... PageGENERAL VIEW......................................................................................PageREMOTE CONTROL................................................................................PageBATTERY INSTALLATION--REMOTE CONTROL..................................PageGENERAL OPERATIONS........................................................................PageLISTEN TO FM RADIO............................................................................PageBLUETOOTH PAIRING AND PLAYBACK...............................................PageADDING OPTIONAL SUBWOOFER AND SPEAKER.............................PageCONNECT TO TV/DVD............................................................................PageCONNECT USING OPTICAL...................................................................PageAUX IN PLAYBACK................................................................................. PageUSB PLAYBACK AND CHARGING.........................................................PageTROUBLESHOOTING GUIDE.................................................................PageSPECIFICATIONS....................................................................................Page
1Features of the Connexx SB26 include:Digital FM tuner 10 presetsBluetooth wireless technologyBuilt-in subwoofer (optional external subwoofer can be added as an accessory)2 zone audio distribution3.5 mm aux input jack on front panelUSB input on front panel with device charging capabilitiesDigital Optical input on rear panel2 analog stereo inputs on rear panel Wireless remote control includedThank you for choosing a Connexx product. We hope you will find the Instructions in  this  owner's  manual  clear  and  easy  to  follow. If you take a few minutes to review, you will learn how to use all of  the features of your new  soundbar stereo for maximum enjoyment.User ManualRCA Connection Cable Wall Mounting BracketsFM AntennaRemote Control with Two BatteriesMain UnitAAAAAAINTRODUCTIONFEATURESPACKING LISTPLEAS E READ CA REFUL LY BEFOR E OPERATI NG THIS E QUIPM ENTKEEP IT I N A SAFE PL ACE FOR F UTURE R EFERE NCEMODEL: SB2625.5 INCH TV/DVD SOUNDBARAUX IN USBA PAIRBAUX IN USBA PAIRBOPTICALBT USBFMTV DVDVOL- VOL+AUX INPAIRMUTE /  /   / ZONE APOWERTUN- TUN+ZONE BPower HarnessFUSE -+DC Power Extension (Red and Black) Wire
This unit has a long cord that can easily be tripped on or pulled on, causing injury, Please make sureUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDThe lighting flash with arrowhead symbol within an equilateral triangle  is  intended to alert the user to the  presence  of   uninsulated “dangerous voltage” within  the  product’s   enclosure  that  may  be  of sufficient   magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is  intended  to  alert  the  user  to  the presence of important  operating  and  maintenance  (servicing) instructions  in  the   literature  accompanying   the appliance.it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or trippedover accidentally.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK            DO NOT OPENFCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications.● Reorient or relocate the  receiving antenna. Increase the separation between the equipment and receiver.● Connect the equipment  into an outlet with a circuit different from that to which the receiver is connected.● Consult the dealer or  an experienced radio/TV technician for help.Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.1 ) Read these instructionsAll the safety and operating instructions should be read before the product is operated.2 ) Keep these instructionsThe safety and operating instructions should be retained for future reference.3 ) Heed all warningsAll warnings on the product and in the operating instructions should be adhered to.4 ) Follow all instructionsAll operating and use instructions should be followed.5 ) Do not use this apparatus near waterDo not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR EL E CT R IC   SH OCK ,   AN D   AN N OY I NG INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.FCC WARNING:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device.However,  there  is  no guarantee  that  interference  will  not  occur in  a  particular  installation.  If  this  equipment does  cause harmful  interference  to  radio  or television reception, which  can  be  determined  by turning  the equipment  off  and  on, the  user is  encouraged  to  try  to  correct  the interference by  one or  more of  the  following measures:2
8 ) Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus(including amplifiers) that produce heat.9 ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than other. A grounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10 ) Protect the power cord from being walked on or pinched particularly at plugs, conveniencethe apparatus.13 )  Refer all servicing to qualified service personnel. Servicing is required when the apparatusapparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.14 ) Power sourceThis product should be operated only from the type of power source indicated on the marking label.refer to the operation instructions.15 ) ServiceDo not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.6 ) Clean only with dry clothUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosolcleaners. Use a dry cloth for cleaning.7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructionsSlots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.receptacles, and the point where they exit from has been damaged in any way, such as power-supply cord or plug is damaged, liquid has   the been objects have  fallen into or  spilledWARNING:To reduce the risk of  fire or electric  shock, do or splashing and that objects vases shall not be placed on apparatus.11  ) Only use attachments/accessories specied by the manufacturer.12 ) Unplug this apparatus during lightning storms or when unused for long periods of timeTo protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.lightning and power-line surges.This will prevent damage to the product due to not expose  this  apparatus  to rain or moisture. The apparatus shall not be exposed to drippingfilled with liquids, such as  WARNING:WARNING:WARNING: supply dealer or to  your  home,  consult  your  appliance If you are not sure of  the  type  of  powerlocal  power  company.  For  products intended to operate from battery power, or other source, 3
2. Mounting the Sound  Bar onto a wallWe recommend having this Sound Bar professionally mounted. By using the included wall mounting metal brackets, the Sound Bar can be mounted onto a wall.Distance between two brackets1. Placing on the tableWhen placing the Sound Bar on an entertainment center, bookshelf, or  any type of oduce a potential heat hazard.17.6 inchesPLACING AND MOUNTINGspace around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could prenclosed space, be sure to allow ANTE NNADC 12V I NEXT IROPTI CAL ININ. EX .DVDAUDI O INTVAUDI O INR RL LZONE B SPEAKERS EXT  UBSR LSUBW OOF ER4
GENERAL VIEWFront ViewRear View14. LED Display15. Remote Sensor5. ZONE B Button12. Volume Up6.TV Audio In Jack5. DVD Audio In Jack7. External Subwoofer Switch3. External Subwoofer Connector 8. Optical In Power Jack3. POWER Button11. PREVIOUS/TUNE Down13.     Play/Pause/     Preset/Memory/Preset Play ButtonAU X IN US BA PAIRBAN TEN N ADC 1 2V INEX T IROP TIC A L ININ . EX.DV DAU DI O I NTVAU DI O I NR RL LZONE B SPEAKERS EXT  UBSR LSU BWO O FER1234 5 6 7 8 9 1012131415114. POWER Indicator2. ZONE A Button1. PAIR Button7. AUX IN Jack8. USB Jack10. Volume Down9. NEXT/TUNE Up6.     (SOURCE)Button1234 5 6 7 8 9 102. ZONE B Left Channel Connector1. ZONE B Right Channel Connector4. Pig Tail Antenna 9. Extended Remote Sensor10. DC IN Jack5
876541231. POWER button5.       TUN- /       /TUN+ button6. VOL ( Volume )+/- buttons4. TV Mode Switch button9. OPTICAL Mode Switch buttonOPTICALBT USBFMTV DVDVOL- VOL+AUX INPAIRMUTE /  /   / ZONE APOWERTUN- TUN+ZONE B12391011121314152. Bluetooth Mode Switch button3. AUX IN Mode Switch button10. USB Mode Switch  button11. ZONE A button13. ZONE B button12. FM Mode Switch button14. DVD Mode Switch button8. MUTE button15. PAIR button7.       ( Play/Pause )/     ( Memory/Preset /Preset Play )buttonREMOTE CONTROLEXT IR (External Remote Sensor) Jackon rear panelIf using the external optional remote sensor, insert the plug into the EXT IR Jack as the arrowhead shown on above picture. This will allow the remote control to work in another  zone if desired.Optional External Remote Sensor6
BATTERY INSTALLATION--- REMOTE CONTROLBattery InstallationRemote Control Effective Rangecontrol of the unit, the remote control may not operate properly.  When there is an obstacle between the unit and the remote control, the remote control may not operate properly.When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote Battery Precaution1.Slide and lift the battery door (Figure 1).2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2).3.Replace the battery door (Figure 3).7
3. During Playback:GENERAL OPERATIONSFollows the order below:2. The default mode is "BT". Touch  the       (mode) button repeatedly to switch to desired mode.5. If the unit is not used for long period of time, please disconnect the power.~ Press  ZONE B button on Remote Control or touch "B" on front panel of the unit  to switch ONor OFF the corresponding ZONE B speakers.~ Press  ZONE A  button on Remote Control or touch "A "on front panel of the unit to switch ONspeakers.or OFF the soundbar~ Press MUTE button on Remote Control to mute the sound on all active zones. Press again to resume.BT  TV  AUX  FM  OPTICAL  USB  DVDThe power indicator will light up blue.~ Press the VOL - /VOL+ button on remote control or touch +/- button on unit  to adjust volume level as desired.1. Touch the      Power button on the unit or press the        button on remote control to power on the unit from standby mode.4. Touch the      Power button on the unit or press the        button on remote control to power off the unit.8
FM Antenna2. Touch the       (mode) button repeatedly until "FM" appears on the display.3. Press and hold the       /TUN - or      /TUN + buttons and then release,  The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception.LISTEN TO FM RADIOBLUETOOTH PAIRING AND PLAYBACK3. Turn on the external BT Device and enter BT searching mode. Startto the user's manual of your BT Device. )Notes:display of the external BT Device, select it and make pairing.Pairing code "0000" may need to be entered.pairing as the screen instructions on the external BT Player. (  For details pairing procedures, please refer  ~   ~ The unit will start to search next ( or previous ) available FM radio station then plays.5. Press        button on remote control or touch         button to play the preset stored station. location(such as Pxx.), then pressA total of 10 stations can be stored into the unit's memory.the        button to complete station storage.     When the external BT Device searched the unit,  will appear on  the / 4.  When a station searched, press and hold the          button to display the desired storage  "SB26"101. Power ON the unit.Or press FM button on Remote Control.1. Power ON the unit. /  /   /        /TUN - or      /TUN + buttons on remote control or touch the         or        button to change the storage location, press         button on the    / remote control or touch 2. Touch the       (mode) button repeatedly until "BT" appears and blinks on the display.Or press BT button on Remote Control to switch to BT mode.~ Press the VOL - /VOL+ button or  touch +/- button to adjust volume level as desired.~ Press the         button or touch         button to pause or play. /   / 4. After successful pairing and connection, the "BT" will stop blinking and send a tone.5. To disconnect the current pairing, touch and hold the PAIR button on unit or press the PAIR button on remote control.During playback:First Time PairingNOTE: After first time pairing, the unit can be automatically connected with the last connected device.~ Touch the        or      button on unit or press the        /TUN- or       /TUN+ button to skip to next or previous track.9
ADDING OPTIONAL SUBWOOFER AND SPEAKER+-There is a SUBWOOFER SELECTOR on the back of the unit to turn on or turn off the  external subwoofer output.IN(Internal subwoofer)- When the switch is moved to "IN" position, there will be no audio   output from the external subwoofer.NOTE: Before connecting, disconnect power.1. Connect one end of subwoofer connection cable ( not supplied ) to the  "+" Jack on the rear of the unit as the figure above.2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.3. Slide the selector to "EX" position as figure above.6. Play the music as usual and set the desired volume. 5. Power ON the unit.IN . E X.ZONE B SPEAKERS EXT  UBSR LSU B WOOFER+-+-4. Connect the R(right channel speaker) and L(left channel speaker) as the figure above.LRSubwooferDuring playback, touch A or B on the unit to switch audio between ZONE A and ZONE B.Or press ZONE A or ZONE B button on remote control.ABand will appear on display if ZONE A and ZONE B are activated.NOTE:10
DVDAUDIO INTVAUDIO INR RL LNOTE: Before connecting, disconnect power.WhiteRed5. Play the audio or video as usual and set the desired volume.  3. Touch the      (mode) button repeatedly until "TV" appears on display.TV audio is selected and it will play through the unit.4. Touch the      (mode) button repeatedly until "DVD" appears on display.DVD audio is selected and it will play through the unit.2. Power ON the unit. Or press TV button on Remote Control.Or press DVD button on Remote Control.NOTE: Before connecting, disconnect power.CONNECT TO TV/DVDAUDIO OUTLRVIDEO OUTVIDEODVD LRYWhiteRed1. Connect as the figure above.11
CONNECT USING OPTICAL 3. Power ON the unit.1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the  rear of the unit as pictured above.2. Connect the other end to the DVD or TV back panel.4. Touch the       (mode) button repeatedly until the "OPTICAL" appears on display.NOTE: Before connecting, disconnect power.DVD or TVOptical Cable(Not Supplied)5. Play the music as usual and set the desired volume. Or press OPTICAL button on Remote Control.NOTE:If  there is no audio output (only  picture) when your TV or DVD player is connected with the soundbar, please check DVD or TV audio setting, and set the digital output to PCM format. 12
4. Touch the      (mode) button on unit repeatedly until "AUX" appears on display.1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such   as iPod, iPhone, iPad, MP3 player, Discman... etc. )5. Play the music in the external player as usual and set the desired volume.AUX IN : LISTEN TO EXTERNAL AUDIO DEVICESof the unit as pictured above.USB : LISTEN TO EXTERNAL AUDIO DEVICES4. Play the music in the external player as usual and set the desired volume.1. Insert the USB as the figure on right.~ Press       button on the Remote Control to play or pause.~ Press       or        button on the Remote Control to skip to next or previous track.NOTE:The USB port can also be used for charging.Or press AUX IN button on Remote Control.3. Power ON the unit. Or press USB button on Remote Control.2. Power ON the unit.NOTE:NOTE:NOTE:USB3. Touch the       (mode) button on unit repeatedly until "USB" appears on display.To the Phones/Aux Out/Line OutConnect to the 3.5mm Audio Out jackof external audio devices including Tablets,Laptops, Smartphones, MP3 Players, etc.13
6<03720 3266,%/(&$86( 3266,%/(628/7,21Reduce the bass level of the connecteddeviceTouch the       (mode) button repeatedly to set the input source to the desired modeNo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not paired consumedThe batteries are     The external device is too far from the unitVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in playback modeVolume in minimum positionPower cable not connected   Raise volume level by touching the +Play the music/movie in the connected device as usual and make sure the volume level of it is in high levelReplace with new batteriesMove the external BT device closer to the unitPair both units as stated in this manual TROUBLESHOOTING GUIDE~Check power connection~Check fuseCheck the following guide before requesting serviceCheck the following guide before requesting serviceor blown fuse    button on unit or VOL+ button on remote controlReduce volume level by touching the - button on unit or VOL- button on remote control14
zMax Power Consumption............................................................................................................60WRadio Coverage ................................................................................................FM 87.5 -108.0 MHBluetooth Effective Range.............................................................................................Up to 32 feet (Measured in open area. Wall and structures may affect the effective range.)                   Power Supply Requirement................................................................DC 12 Volts, Negative GroundOperation Voltage............................................................................................................DC10V-14V SPECIFICATIONSSpecifications subject to change without notice.Unit size..........................................................................................646.9(W) X 85.6(H)X 80.7(D)mmNOTE:THE  MANUFACTURER  IS  NOT  RESPONSIBLE  FOR  ANY  RADIO  OR  TV INTERFERENCE  CAUSED  BY  UNAUTHORIZED  MODIFICATIONS  TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE.NOTE:(1) The device may cause harmful interference. andThe  device  complies  with  Part  15  of the FCC rules.  Operation is subject to the following two conditions.(2) This device must accept any interference received, including the interference that may  cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC WARNINGS:FCC WARNINGS:15Remote Effective Range................................................................................................Up to 15 feet Device and Accessories Net Weight.............................................................................1.45kg(3.2 lb)
www.riverparkinc.com2016 RIVERPARK Inc.V. 09.16C

Navigation menu