Junlan Electronic TSB631N6 Bluetooth Tower Speaker User Manual CHT910

Shenzhen Junlan Electronic Ltd Bluetooth Tower Speaker CHT910

User manual

BLUETOOTH MINI TOWER SPEAKERINSTRUCTION MANUALMODEL: SP269PL-ASSTPLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
WARNING:TO  REDUCE THE   RISK OF   FIRE OR   ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.WARNING:TO   REDUCE THE   RISK  OF   FIRE OR   ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USE THERECOMMENDED ACCESSORIES ONLY.FCC NOTICE:This equipment has been  tested   and  found to  complywith the limits for a Class B  digital  device,  pursuant  topart 15 of the FCC Rules. These limits  are  designed  toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not  Installed  and  used  in  accordance  with  theinstructions, may cause  harmful  interference  to  radiocommunications.However, there is no guarantee that interference will notoccur in a particular installation.  If this equipment  doescause    harmful   interference   to   radio   or   televisionreception,  which  can  be  determined   by  turning   theequipment off and on, the user  is encouraged  to  try  tocorrect the interference by one or more of the followingmeasures:        Reorient or relocate the receiving antenna.        Increase the separation between the equipment and        receiver.        Connect the equipment into an outlet on a circuit        different from that to which the receiver is connected.        Consult the dealer or an experienced radio/TV        technician for help.FCC WARNING:To  assure  continued  compliance,  follow  the  attachedinstallation instructions  and  use  only  shielded  cableswhen  connecting  to  other  devices.  Modifications  notauthorized by the manufacturer may void user`s authorityto operate this device.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO  NOT                   REMOVE COVER (OR BACK). NO USER-SERVICEABLE                   PARTS   INSIDE.   REFER  SERVICING TO  QUALIFIED                    SERVICE PERSONNEL.1WARNING:To reduce the risk of fire or electric shock, do not exposethis apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing  and that objects filled with liquids, such as  vases shall not be placed on apparatus.The lighting flash with arrowhead symbol within an equilateral triangle  is  intended to alert the user to the  presence  of   uninsulated “dangerous voltage within  the  product’s   enclosure  that  may  be  of sufficient   magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is  intended  to  alert  the  user  to  the presence of important  operating  and  maintenance  (servicing) instructions  in  the   literature  accompanying   the appliance.
Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit. 1) Read these instructions.   All the safety and operating instructions should be read before the product is operated.2) Keep these instructions.    The safety and operating instructions should be retained for future reference.3) Heed all warnings.   All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions.   All operating and use instructions should be followed.5) Do not use this apparatus near water.   Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen   sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth.   Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol   cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's   instructions.   Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure   reliable operation of the product and to protect it from overheating. These openings must not be   blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,   rug or other similar surface. This product should never be placed near or over a radiator or heat   source. This product should not be placed in a built-in installation such as a bookcase or rack   unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other   apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug   has two blades with one wider than the other. A grounding type plug has two blades and a   third grounding prong. The wide blade or the third prong are provided for your safety. If the   provided plug does not fit into your outlet, consult an electrician for replacement of the   obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience   receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold   with the apparatus. When a cart is used, use caution when moving the cart/apparatus   combination to avoid injury from tip-over.   An appliance and cart combination should be moved with care.   Quick stop, excessive force and uneven surfaces may cause the   appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time.    To protect your product from a lightning storm, or when it is left unattended and unused for long    periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This    will prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus    has been damaged in any way, such as power-supply cord or plug is damaged, liquid has    been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain    or moisture does not operate normally, or has been dropped.15) Power source    This product should be operated only from the type of power source indicated on the marking label.    If you are not sure of the type of power supply to your home, consult your appliance dealer or local    power company. For products intended to operate from battery power, or other source, refer to the    operation instructions.For  example,  this  unit  may  not  have  the  capability  to  be  connected  to  an  outdoor  antenna.2
1231. Remote Sensor2. Speakers3. Speaker NetNote:The Speaker Net can be taken out and reassembled as Figure above.INSTALLATION3
MAIN UNIT11110879234563. EQ(Equalizer)button5. SOURCE button6. VOL- (Volume Down) button7. VOL+ (Volume Up) button1. AUX IN jack 8.       (Next) button9.       (Previous) button10.      (Play/Pause) button 4.      POWER button 2. Indicator11. DC IN JackLOCATION OF CONTROLS4DC INDC      12V, 1ADC INDC      12V, 1AAUX INEQ SOUR CE VOL+VOL-
REMOTE CONTROL23SOURCEEQVOLPOWER876541231.      POWER button2.       (Previous) button3. VOL (Volume)+/- buttons4. SOURCE button5.      (Mute) button6.       (Next) button7.       (Play/Pause) button8. EQ (Equalizer) buttonLOCATION OF CONTROLS5
BATTERY PRECAUTIONSApprox.15 feetFig.1 Fig.2 Fig.3Remote SensorBATTERY INSTALLATION--- REMOTE CONTROLEFFECTIVE DISTANCE OF REMOTE TRANSMITTER-First Time UseRemove and discard the insulation tab as figure on the right-Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.3. Close the battery holder.2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 6
~ Green:         AUX IN~ Blue:         Bluetooth4. During Playback:~ Press the VOL (Volume) buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as desired.~ Press     (Mute) button on the Remote Control to turn off the sound. Press again to resume.to shut off the unit if no using for long period of time. NOTE: Pull out the AC/DC Adapter plugGENERAL OPERATIONS1. Insert the AC/DC Adapter plug into a conveniently located AC outlet having 100-240V~50/60Hz. The Indicate (Red) will light.2. Press the      Power button on the unit or remote control to power on the unit.corresponding color as below:3. Press the SOURCE button repeatedly to switch to desired mode.The color of Indicator turns to 5. When finished listening, press the      Power button to power off the unit.The indicator will turn Red. 7~ Press the       or       button to skip track. ~ Press the     (Play/Pause) button to pause. Press again to resume normal playback.~ Press the  EQ button on unit or on remote control to change the EQ mode.
X I4. Press the SOURCE button repeatedly until the color of Indicator turns to Green.3. Power ON the unit.1. Connect one end of supplied audio connection cable to the AUX IN  jack on the top of the unit2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPhone, iPad, MP3 player, Discman... etc.).5. Play the music in the external player as usual. LISTEN TO EXTERNAL AUDIO DEVICES     as the figure above.8AUX INEQ SOUR CE VOL+VOL-
1. Power ON the unit.3. Turn on the BT function on the external BT device and play the music as usual. 4. During palyback:    Press the VOL (Volume) +/- buttons to adjust volume level.    Press the       or       button to skip track.     Press the     (Play/Pause) button to pause. Press again to resume normal playback.NOTES:BLUETOOTH PARING AND PLAYBACKIn first time use, pairing the external BT device as below:A. Power ON the unit, press the SOURCE button repeatedly until the color ofB. Power ON the external BT player and enter to searching mode. Start pairing as the on screen instructions on the external BT Player (For details pairing procedures, please refer to the user’s manual of your BT device.).C. When the external BT player searched the Speaker, our model number “SP269PL” will appear 2. Press the SOURCE button on the unit or remote control until the color of Indicator changed to Blue. Indicator turned to Blue and blinking.9on the display of external BT device. Select it and make pairing.  D. Pairing code “0000” may need to enter. E. After successful connection, play music as usual.
Check the followings before requesting serviceSYMPTOM  POSSIBLE CAUSE POSSIBLE SOULTION desired mode.Press the SOURCE button repeatedly to set the input source to the desired modeTROUBLESHOOTING GUIDENo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not pairedThe external device is far fromthe unitThe batterry  is consumedVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionwall outlet Plug to the wall outlet.Raise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelReduce the bass level of the connecteddeviceVOL (Volume ) - buttonReduce the volume level by pressing the  Replace with new batteryPut the external BT device close to theunitPair both units as BT pairing pageAC/DC adapter plug not connected to the      10
AccessoriesRemote Working Distance...........................................................................................Up to 15 feetTECHNICAL SPECIFICATIONSSpeakers ...............................................................................................................................3W x 2Bluetooth Working Distance.........................................................................................Up to 30 feet (Measured in open area. Wall                                              and structures may affect the effective range.)1 x Remote Control1 x AUX IN Cable1 x User Manual1 x AC/DC AdapterAC/DC Adapter Input........................................................................................................AC 100-240V~50/60HzOutput...............................................................................................DC 12V            1 A11
 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.  This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.   Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu