Jvc Ca Mxgt700 Users Manual MXGT700&G500[UW]f.pm6

CA-MXGT700 to the manual 74aedbc9-962c-40b2-ba1f-fdf8940c1f10

: Jvc Jvc-Ca-Mxgt700-Users-Manual-325457 jvc-ca-mxgt700-users-manual-325457 jvc pdf

Open the PDF directly: View PDF .
Page Count: 38

COMPACT COMPONENT SYSTEM

SISTEMAS DE COMPONENTES COMPACTOS

SISTEMA DE COMPONENTE COMPACTO

For Customer Use:

Enter below the Model No. and Serial

No. which are located either on the rear,

bottom or side of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

LVT0901-004A

[UW]

CA-MXG500

CA-MXGT700

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

INSTRUÇÕES

CA-MXGT700

CA-MXG500

DISC CHANGE

CD-R/RW PLAYBACK

CLOCK

/TIMER

DISPLAY

PHONES REPEAT

REC START

/STOP

CD REC

START DUBBING

PROGRAM RANDOM TAPE BTAPE A

AUX TAPE

CD

FM

/AM

SUBWOOFER

LEVEL

SOUND

MODE

MX-G500

CD 2

CD 3

EXTENDED SUPER BASS

CD

3

FULL - LOGIC CONTROL CD SYNCHRO RECORDING

CD 1

STANDBY/ON

STANDBY

COMPU PLAY CONTROL

MIC

LEVEL

MIN MAX

MIC

DISC CHANGE

CD-R/RW PLAYBACK

CLOCK

/TIMER

DISPLAY

PHONES REPEAT

REC START

/STOP

CD REC

START DUBBING

PROGRAM RANDOM TAPE BTAPE A

AUX TAPE

CD

FM

/AM

SUBWOOFER

LEVEL

SOUND

MODE

MX-GT700

CD 2

CD 3

EXTENDED SUPER BASS

CD

3

FULL - LOGIC CONTROL CD SYNCHRO RECORDING

CD 1

STANDBY/ON

STANDBY

COMPU PLAY CONTROL

MIC

LEVEL

MIN MAX

MIC

DISC

SKIP

VOLUME

VOLUME

+

–

RM–SMXG500U REMOTE CONTROL

STANDBY/ON

123

456

789

10

+10

SLEEP

SOUND

MODE

TAPE A/B

FADE

MUTING

FM/AM

AUX

CD

TAPE

SUBWOOFER

LEVEL

FM MODE

KARAOKE ECHO

DISC

SKIP

VOLUME

VOLUME

+

–

RM–SMXG500U REMOTE CONTROL

STANDBY/ON

123

456

789

10

+10

SLEEP

SOUND

MODE

TAPE A/B

FADE

MUTING

FM/AM

AUX

CD

TAPE

SUBWOOFER

LEVEL

FM MODE

KARAOKE ECHO

MXGT700&G500COVER[UW]8.pm6 02.5.23, 3:44 PM1

– G-1 –

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off

completely. The STANDBY/ON button in any

position does not disconnect the mains line. The

power can be remote controlled.

Warning, Cautions and Others

Avisos, precauciones y otras notas

Advertências, precauções e outras notas

Precaución –– Interruptor STANDBY/ON!

Desconectar el cable de alimentación para

desactivar la alimentación totalmente. Cualquier

que sea la posición de ajuste del interruptor

STANDBY/ON, la alimentación no es cortada

completamente. La alimentación puede ser

controlada remotamente.

Precaução –– Interruptor STANDBY/ON!

Desconectar o cabo de alimentação para desligar a

alimentação por completo. Qualquer que seja a

posição de ajuste do interruptor STANDBY/ON,

a alimentação não é completamente cortada. A

alimentação pode ser controlada remotamente.

MXGT700&G500Safety[UW]8.pm6 02.5.23, 3:45 PM1

– G-2 –

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a

newspaper or cloth, etc., the heat may not be able to get

out.)

• Do not place any naked flame sources, such as lighted

candles, on the apparatus.

• When discarding batteries, environmental problems

must be considered and local rules or laws governing

the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping

or splashing and that no objects filled with liquids such

as vases shall be placed on the apparatus.

PRECAUCIÓN

Para reducir riesgos de choques eléctricos, incendio, etc.:

1. No extraiga los tornillos, los cubiertas ni la caja.

2. No exponga este aparato a la lluvia o a la

humedad.

PRECAUÇÃO

Para reduzir riscos de choques elétricos, incêndio, etc.:

1. Não remova parafusos e tampas ou desmonte a

caixa.

2. Não exponha este aparelho à chuva nem à

umidade.

AVISO

• Não obstrua as aberturas e orifícios de ventilação. (Se

os orifícios ou aberturas de ventilação estiverem

obstruídos por qualquer papel ou tecido, não haverá

circulação do ar quente.)

• Não coloque nenhum objeto com chamas, como velas

acesas, sobre o aparelho.

• Ao descartar as baterias, leve em consideração os

problemas que possam ser causados ao meio ambiente

e os regulamentos e leis locais e governamentais sobre

recolhimento dessas baterias devem ser rigorosamente

seguidos.

• Não exponha este aparelho à chuva, umidade, pingos

ou esguichos de água, nem coloque em cima do

mesmo qualquer tipo de recipiente que contenha

líquidos, como por exemplo vasos.

PRECAUCIÓN

• No obstruya las rendijas o los orificios de ventilación.

(Si las rendijas o los orificios de ventilación quedan

tapados con un periódico, un trozo de tela, etc., no se

podrá disipar el calor).

• No ponga sobre el aparato ninguna llama al

descubierto, como velas encendidas.

• Cuando tenga que descartar las pilas, tenga en cuenta

los problemas ambientales y observe estrictamente los

reglamentos o las leyes locales sobre disposición de las

pilas.

• No exponga este aparato a la lluvia, humedad, goteos o

salpicaduras. Tampoco ponga recipientes conteniendo

líquidos, como floreros, encima del aparato.

English

Português Español

MXGT700&G500Safety[UW]8.pm6 02.5.23, 3:46 PM2

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1 Front: No obstructions and open spacing.

2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a

stand with a height of 10 cm or more.

Precaución: el aparato debe estar bien ventilado

Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque

el aparato del modo siguiente:

1 Parte delantera: No ponga nada delante, deje el espacio libre.

2 Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se

detallan a continuación.

3 Parte inferior: Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire;

para ello, coloque el aparato sobre una base a una altura mínima de 10 cm.

Precaução: Ventilação adequada

Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:

1 Parte frontal: Sem obstruções e espaços abertos.

2 Partes laterais/Tampa/Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas

dimensões são indicadas abaixo.

3 Parte inferior: Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a

ventilação se este for instalado numa posição que tenha uma altura de 10 cm ou mais.

1 cm 1 cm

15 cm

15 cm

15 cm

15 cm

15 cm

10 cm

CA-MXGT700 CA-MXGT700

CA-MXG500 CA-MXG500

– G-3 –

MXGT700&G500Safety[UW]8.pm6 02.5.23, 3:46 PM3

IMPORTANT FOR LASER PRODUCTS

IMPORTANTE PARA PRODUCTOS LÁSER

IMPOTANTE PARA PRODUCTOS LASER

REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS

2 WARNING LABEL, PLACED INSIDE THE UNIT

CLASS 1

LASER PRODUCT

1. CLASS 1 LASER PRODUCT

2. CAUTION: Invisible laser radiation when open and interlock

failed or defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user

serviceable parts inside the Unit; leave all servicing to quali-

fied service personnel.

1. PRODUCTO LÁSER CLASE 1

2. PRECAUCIÓN: En el interior hay radiación láser invisible.

Evite el contacto directo con el haz.

3. PRECAUCIÓN: No abra la tapa superior. En el interior de la

unidad no existen piezas reparables por el usuario; deje todo

servicio técnico en manos de personal calificado.

1 ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE

POSTERIOR DE LA CAJA

1 ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE

POSTERIOR DA CAIXA DO APARELHO

2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTE-

RIOR DE LA UNIDAD

2 ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE

INTERNA DA UNIDADE

1. PRODUTO LASER CLASSE 1

2. CUIDADO: O laser emite uma rediação invisível que é

perigosa, caso o aparelho esteja aberto e a trava inoperante

ou danificada. Evite exposição direta ao feixe dos raios.

3. CUIDADO: Não abra a caixa do aparelho. Não existem

peças reparáveis pelo usuário na parte interna da unidade.

Solicite assistência técnica somente a pessoal técnico

qualificado.

– G-4 –

1 CLASSIFICATION LABEL, PLACED ON EXTERIOR

SURFACE

CAUTION: Invisible laser

radiation when open and

interlock failed or defeated.

AVOID DIRECT EXPOSURE

TO BEAM. (e)

VARNING: Osynlig laser-

strålning när denna del är

öppnad och spärren är

urkopplad. Betrakta ej

strålen. (s)

ADVARSEL: Usynlig laser-

stråling ved åbning, når

sikkerhedsafbrydere er ude

af funktion. Undgå udsæt-

telse for stråling (d)

VARO: Avattaessa ja suo-

jalukitus ohitettaessa olet

alttiina näkymättömälle

lasersäteilylle. Älä katso

säteeseen. (f)

MXGT700&G500Safety[UW]8.pm6 02.5.23, 3:46 PM4

– 1 –

English

Introduction

About This Manual

This manual is organized as follows:

•The manual mainly explains operations using the

buttons and controls on the unit. You can also use the

buttons on the remote control if they have the same or

similar names (or marks) as those on the unit.

If operation using the remote control is different from

that using the unit, it is then explained.

• Basic and common information that is the same for many

functions is grouped in one place, and is not repeated in

each procedure. For instance, we do not repeat the

information about turning on/off the unit, setting the

volume, changing the sound effects, and others, which are

explained in the section “Common Operations” on pages

10 to 12.

• The following marks are used in this manual:

Gives you warnings and cautions to prevent

damage or risk of fire/electric shock.

Also gives you information which is not good

for obtaining the best possible performance

from the unit.

Gives you information and hints you had better

know.

Precautions

Installation

• Install in a place which is level, dry and neither too hot nor

too cold—between 5˚C and 35˚C.

• Install the unit in a location with adequate ventilation to

prevent internal heat built-up in the unit.

• Leave sufficient distance between the unit and the TV.

• Keep the speakers away from the TV to avoid interference

with TV.

DO NOT install the unit in a location near heat

sources, or in a place subject to direct sunlight,

excessive dust or vibration.

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to

obtain the best possible performance from your unit, and retain this manual

for future reference.

Power sources

• When unplugging from the wall outlet, always pull the

plug, not the AC power cord.

DO NOT handle the AC power cord with wet

hands.

Moisture condensation

Moisture may condense on the lens inside the unit in the

following cases:

• After starting heating in the room

• In a damp room

• If the unit is brought directly from a cold to a warm place

Should this occur, the unit may malfunction. In this case,

leave the unit turned on for a few hours until the moisture

evaporates, unplug the AC power cord, and then plug it in

again.

Others

• Should any metallic object or liquid fall into the unit,

unplug the unit and consult your dealer before operating

any further.

• If you are not going to operate the unit for an extended

period of time, unplug the AC power cord from the wall

outlet.

DO NOT disassemble the unit since there are no

user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM1

– 2 –

English

Contents

Location of the Buttons and Controls ....................... 3

Front Panel ................................................................. 3

Remote Control .......................................................... 5

Getting Started............................................................ 6

Unpacking .................................................................. 6

Putting the Batteries into the Remote Control ........... 6

Connecting Antennas ................................................. 6

Connecting Speakers .................................................. 7

Connecting Other Equipment ..................................... 8

Adjusting the Voltage Selector ................................... 9

Canceling the Display Demonstration ....................... 9

Common Operations ................................................ 10

Turning On or Off the Power ..................................... 10

Setting the Clock ...................................................... 10

Setting the AM Tuner Interval Spacing .................... 11

Selecting the Sources ................................................. 11

Adjusting the Volume ............................................... 11

Reinforcing the Bass Sound ..................................... 12

Selecting the Sound Modes ...................................... 12

Listening to the Radio .............................................. 13

Tuning in a Station ................................................... 13

Presetting Stations .................................................... 13

Tuning in a Preset Station ........................................ 13

Playing Back CDs ..................................................... 14

Loading CDs ............................................................ 14

Playing Back CDs—All Disc and One Disc ............ 14

Basic CD Operations ................................................ 15

Programing the Playing Order of the Tracks

—Program Play .................................................. 16

Playing at Random—Random Play ......................... 17

Repeating Tracks or CDs—Repeat Play .................. 17

Prohibiting Disc Ejection—Tray Lock .................... 17

Playing Back Tapes ................................................... 18

Playing Back a Tape ................................................. 18

Recording .................................................................. 19

Recording a Tape on Deck B .................................... 19

Dubbing Tapes .......................................................... 20

CD Synchronized Recording ..................................... 20

Using the Microphones............................................. 21

Singing Along—Karaoke .......................................... 21

Using the Timers ....................................................... 22

Using Daily Timer .................................................... 22

Using Recording Timer ............................................ 23

Using Sleep Timer .................................................... 24

Timer Priority ........................................................... 24

Maintenance .............................................................. 25

Troubleshooting ........................................................ 26

Specifications ............................................................. 27

English

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM2

– 3 –

English

Location of the Buttons and Controls

Become familiar with the buttons and controls on your unit.

Front Panel

DISC CHANGE

STANDBY/ON

STANDBY

CD-R/RW PLAYBACK

CLOCK

/TIMER

DISPLAY

PHONES REPEAT

REC START

/STOP

CD REC

START DUBBING

PROGRAM RANDOM TAP E BTAP E A

AUX TAPE

CD

FM

/AM

SUBWOOFER

LEVEL

SOUND

MODE

CD 2

CD 3

EXTENDED SUPER BASS

3

FULL - LOGIC CONTROL CD SYNCHRO RECORDING

CD

CD 1

1

3

4

9

p

q

w

e

r

t

y

5

u

g

f

d

s

a

;

o

l

2

6

i

8

COMPU PLAY CONTROL

7

MIC

LEVEL

MIN MAX

MIC

h

j

k

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM3

– 4 –

English

See pages in the parentheses for details.

Front Panel

1STANDBY/ON button and STANDBY lamp (10, 11)

2CLOCK/TIMER button (10, 22 – 24)

3DISPLAY button (10)

4PRESET +/– buttons (13)

4 / ¢ (reverse search/forward search) buttons

(10, 15 – 17, 22 – 24)

57 (stop) button (14 – 21)

6TUNING +/– buttons (13)

1 / ¡ (fast rewind/fast forward) buttons (11, 15, 18)

7Display window

8Remote sensor

9TAPE 3 button and lamp (11, 18, 20)

Pressing this button also turns on the unit.

pCD 6 (play/pause) button and lamp (11, 14 – 16, 21)

Pressing this button also turns on the unit.

qFM/AM button and lamp (11, 13)

Pressing this button also turns on the unit.

wAUX button and lamp (11)

Pressing this button also turns on the unit.

ePHONES jack (11)

rREPEAT button (14, 15, 17)

PROGRAM button (16)

RANDOM button (17)

tREC START/STOP button (19, 21)

CD REC START button (20)

DUBBING button (20)

yTAPE A button (18)

TAPE B button (18)

uDeck A cassette holder (18, 20)

Pressing the 0 EJECT portion opens the holder.

iCarrousel

o0 (Carrousel open/close) button (14 – 17)

Pressing this button also turns on the unit.

;DISC CHANGE button (14, 15)

Continued

aDisc number buttons and lamps (CD1, CD2, and CD3)

(15 – 17, 20)

Pressing one of these buttons also turns on the unit.

sSET button (10, 13, 16, 22 – 24)

dCANCEL/DEMO button (9, 10, 16, 22, 23)

fSOUND MODE control (12)

gVOLUME control (11, 21)

hSUBWOOFER LEVEL control (12)

jMIC LEVEL control (21)

kMIC jack (21)

lDeck B cassette holder (18 – 20)

Pressing the EJECT 0 portion opens the holder.

Display window

1Timer indicators

• DAILY (daily timer), REC (recording timer), SLEEP

(sleep timer), and (timer) indicators

2Tape operation indicators

• A/B (operating deck), REC (recording), and 2 3 (tape

running) indicators

3CD play mode indicators

• REPEAT (1, 1 DISC, ALL DISC), PRGM (program),

and RANDOM indicators

4Tuner operation indicators

• MONO and ST (stereo) indicators

5SOUND MODE indicator

6Disc indicators

7Volume level, Subwoofer level and Sound Mode pattern

indicators

8Karaoke ( ) and echo ( ) indicators

9SUBWOOFER LEVEL indicator

pCD track number indicators

qMain display

• Shows the source name, frequency, etc.

Display Window

126

4

35

p

789q

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM4

– 5 –

English

Remote Control

Remote Control

1STANDBY/ON button (10)

2SLEEP button (24)

3AUX button (11)

Pressing this button also turns on the unit.

4Number buttons (13, 15)

5KARAOKE button (21)

6TAPE 3 button (11, 18)

Pressing this button also turns on the unit.

7FM/AM button (11, 13)

Pressing this button also turns on the unit.

8CD 6 button (11, 14 – 16)

Pressing this button also turns on the unit.

94/1 (reverse search/fast rewind) button

(13, 15, 17, 18)

pVOLUME – button (11, 21)

qSUBWOOFER LEVEL button (12)

wSOUND MODE button (12)

eFM MODE button (13)

rECHO button (21)

tTAPE A/B button (18)

yFADE MUTING button (11)

uDISC SKIP button (14, 15)

iVOLUME + button (11, 21)

o¢/¡ (forward search/fast forward) button

(13, 15, 17, 18)

;7 (stop) button (14 – 21)

When using the remote control, point it at

the remote sensor on the front panel.

DISC

SKIP

VOLUME

VOLUME

+

–

RM–SMXG500U REMOTE CONTROL

STANDBY/ON

123

456

789

10

+10

SLEEP

SOUND

MODE

TAPE A/B

FM/AM

AUX

CD

TAPE

SUBWOOFER

LEVEL

FM MODE

FADE

MUTING

2

1

3

4

8

9

p

q

w

u

i

t

o

KARAOKE ECHO

e

5

7

6

r

y

;

DISC CHANGE

COMPU PLAY CONTROL

STANDBY/ON

STANDBY

CD-R/RW PLAYBACK

CLOCK

/TIMER

DISPLAY

PHONES REPEAT

REC START

/STOP

CD REC

START DUBBING

PROGRAM RANDOM TAPE BTAPE A

AUX TAPE

CD

FM

/AM

SUBWOOFER

LEVEL

SOUND

MODE

EXTENDED SUPER BASS

CD

3

FULL - LOGIC CONTROL CD SYNCHRO RECORDING

PLAY

CD 3

CD 1

CD 2

MIC

LEVEL

MIN MAX

MIC

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM5

– 6 –

English

1

Attach the FM antenna to the FM [75 Ω]

coaxial terminal.

2

Extend the FM antenna.

3

Fasten it up in the position which gives you

the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary

measure. If reception is poor, you can connect an outdoor FM

antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Getting Started

Unpacking

After unpacking, check to be sure that you have all the

following items.

The number in the parentheses indicates the quantity of the

pieces supplied.

• AM loop antenna (1)

• FM antenna (1)

• Remote control (1)

• Batteries (2)

• AC plug adaptor (1)

If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries—UM-4/AAA/IEC R03—into the remote

control, by matching the polarity (+ and –) on the batteries

with the + and – markings on the battery compartment.

When the remote control can no longer operate the unit,

replace both batteries at the same time.

• DO NOT use an old battery together with a new one.

• DO NOT use different types of batteries together.

• DO NOT expose batteries to heat or flame.

• DO NOT leave the batteries in the battery

compartment when you are not going to use the

remote control for an extended period of time.

Otherwise, it will be damaged from battery leakage.

UM-4/AAA/IEC R03

Continued

Connecting Antennas

FM antenna

FM antenna (supplied)

Outdoor FM antenna

(not supplied)

A 75 Ω antenna with coaxial type connector should be

used.

-

+

-

+

FM [75 ]

ANTENNA

AM

FM [75 ]

ANTENNA

AM

1

3

2

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM6

– 7 –

English

1

Press and hold the clamp of the AM terminal

on the rear of the unit.

2

Insert the end of the AM loop antenna cord

into the terminal.

• If the AM loop antenna wire is covered

with vinyl, remove the vinyl by twisting it

as shown in the diagram.

3

Release the finger from the clamp.

4

Turn the AM loop antenna until you have the

best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire

to the AM terminal and extend it horizontally. (The AM loop

antenna must remain connected.)

For better reception of both FM and AM

• Make sure the antenna conductors do not touch any other

terminals and connecting cords.

• Keep the antennas away from metallic parts of the unit,

connecting cords, and the AC power cord.

1

Press and hold the clamp of the speaker

terminal on the rear of the unit.

2

Insert the end of the speaker cord into the

terminal.

Match the polarity (colors): Blue (+) to blue (+) and black

(–) to black (–); red (+) to red (+) and black (–) to black

(–).

• If the wire is covered with vinyl, remove

the vinyl by twisting it as shown in the

diagram.

3

Release the finger from the clamp.

IMPORTANT:

•Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the

unit.

•DO NOT connect more than one speaker to one speaker

terminal.

MAIN SPEAKER SUBWOOFER

4-8

[ ] 6

[ ]

RR

LL

-16

AM antenna

Vinyl-covered wire

(not supplied)

AM loop antenna

(supplied)

Connecting Speakers

Speaker

cord

(red/black)

From left

main

speaker’s

terminals

Speaker cord

(red/black)

Speaker cord

(blue/black)

From right

main

speaker’s

terminals

From left

subwoofer’s

terminals

From right

subwoofer’s

terminals

1

Speaker cord

(blue/black)

Blue Red

Black

ANTENNA

FM 75 AM

[ ]

1

Black

2, 3 2, 3

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM7

– 8 –

English

Connecting Other Equipment

You can connect both analog and digital equipment.

•DO NOT connect any equipment while the power

is on.

•DO NOT plug in any equipment until all

connections are complete.

To connect an analog component

Be sure that the plugs of the audio cords are color coded:

White plugs and jacks are for left audio signals, and red ones

for right audio signals.

For playing the other equipment through this unit,

connect between the audio output jacks on the other

equipment and AUX IN jacks by using audio cords (not

supplied).

To connect audio equipment with an optical digital

input terminal

You can record CD sound onto the connected digital

equipment.

Connect an optical digital cord (not supplied) between the

optical digital input terminal on the other equipment and the

DIGITAL OUT [OPTICAL] terminal.

For CA-MXGT700:

To remove the speaker grilles

The speaker grilles are removable as the illustration below.

To remove the speaker grille, insert your fingers around the

projection at the top of the speaker grille, then pull gently

towards you by holding the side. Do the same for the rest of

projections each at a time.

To attach the speaker grille, put the projections of the

speaker grille into the holes of the speaker.

DIGITAL OUT

(OPTICAL)

To audio output

AUX IN

Audio/video

equipment

To optical

digital input

Before connecting the other equipment,

remove the protective plug from the

terminal.

Audio equipment

with an optical digital

input

Protective

plug

Projections

Speaker grille

SP-MXGT700

Holes

Continued

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM8

– 9 –

English

Canceling the Display Demonstration

When connecting the AC power cord into a wall outlet, the

unit automatically starts display demonstration.

On the unit ONLY:

To cancel the display demonstration, press

CANCEL/DEMO.

When you press other buttons

The display demonstration stops temporarily. It will start

automatically again (if no operation is done for 2 minutes) until you

cancel it by pressing CANCEL/DEMO.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for more

than 2 seconds.

CANCEL

/

DEMO

CANCEL

/

DEMO

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your

area with the voltage selector on the rear of the unit.

Use a screwdriver to rotate the voltage selector so the voltage

number the voltage mark is pointing at is the same as the

voltage where you are plugging in the unit. (See the back

cover page.)

DO NOT plug in before setting the voltage selector

on the rear of the unit and all connection

procedures are complete.

NOW, you can plug in the unit and other

connected equipment FINALLY!

220

127

240

110

230-

AUX

IN

VOLTAGE

SETTING

VOLTAGE

SETTING

220

127

110

230-

240

MAIN SPEAKER SUBWOOFER

[ ]

RR

LL

[ ]

4-8 6-16

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM9

– 10 –

English

3

Press 4 or ¢ to adjust the

minute, then press SET.

To check the clock time

Press DISPLAY while playing any source.

• Each time you press the button, the source

indication and the clock time alternate on the

display.

To adjust the clock again

If you have adjusted the clock before, you need to press

CLOCK/TIMER repeatedly until “CLOCK” is selected.

• Each time you press the button, the clock/timer setting

modes change as follows:

If there is a power failure

The clock loses the setting and is reset to “– – : – –.” You need to set

the clock again.

Turning On or Off the Power

To turn on the unit, press

STANDBY/ON so that the STANDBY

lamp goes off.

To turn off the unit (on standby), press

STANDBY/ON again so that the

STANDBY lamp lights up.

A little power is always consumed even while the unit is on

standby.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

When you unplug the AC power cord or if a power

failure occurs

The clock is reset to “– – : – –” soon, while the tuner preset stations

(see page 13) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built

in this unit. You can set the clock whether the unit is on or

off.

On the unit ONLY:

1

Press CLOCK/TIMER.

The hour digits start flashing on the display.

2

Press 4 or ¢ to adjust the

hour, then press SET.

The minute digits start flashing on the display.

• If you want to correct the hour after pressing SET,

press CANCEL/DEMO. The hour digits start

flashing again.

STANDBY/ON

STANDBY

STANDBY/ON

STANDBY

CLOCK

/

TIMER

SET

ON TIME

(Daily Timer)

DAILY

Canceled ON TIME

(Recording Timer)

CLOCK

REC

SET

DISPLAY

Common Operations Continued

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM10

– 11 –

English

Adjusting the Volume

You can adjust the volume level only while the unit is turned

on.

Turn the VOLUME control

clockwise to increase the volume or

counterclockwise to decrease it.

• The volume level can be adjusted

in 32 steps (VOL MIN, VOL 1 —

VOL 30, and VOL MAX).

When using the remote control, press VOLUME + to increase

the volume or press VOLUME – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound

comes out of the speakers. Be sure to turn down the volume before

connecting or putting on headphones.

DO NOT turn off (on standby) the unit with the

volume set to an extremely high level; otherwise, a

sudden blast of sound can damage your hearing,

speakers and/or headphones when you turn on the

unit or start playing any source next time.

REMEMBER you cannot adjust the volume level

while the unit is on standby.

To turn down the volume level temporarily

Press FADE MUTING on the remote control.

The volume level gradually decreases to

“VOL MIN.”

To restore the sound, press the button again.

Selecting the Sources

To listen to the radio, press FM/AM. (See page 13.)

To play back CDs, press CD 6. (See pages 14 – 17.)

To play back tapes, press TAPE 3. (See page 18.)

To select the external equipment as the source, press AUX.

When you press the play button for a particular source (AUX,

FM/AM, CD 6, and TAPE 3), the unit turns on (and the

unit starts playing the source if it is ready—COMPU PLAY

CONTROL).

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and some

countries use 10 kHz spacing.

• This function works only when the unit is turned off.

• 10 kHz spacing is the initial setting.

On the unit ONLY:

To select 9 kHz, press STANDBY/ON while holding

down 1 when the unit is in standby mode.

“AM - 9” appears on the display.

To select 10 kHz interval again, press STANDBY/ON

while holding down ¡ when the unit is in standby mode.

“AM - 10” appears on the display.

AUX

FM

/AM

CD TAPE

+

STANDBY/ON

STANDBY

+

STANDBY/ON

STANDBY

FADE

MUTING

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM11

– 12 –

English

Reinforcing the Bass Sound

This function only affects the playback sound, not your

recording.

Turn the SUBWOOFER LEVEL

control clockwise to increase the

subwoofer sound or counterclockwise

to decrease it.

• The subwoofer level can be adjusted

in 4 steps (LEVEL 1 — LEVEL 4.)

If you turn the control clockwise up to the LEVEL 4,

“MAX” flashes on the display for a few seconds.

When using the remote control, press SUBWOOFER

LEVEL to adjust the subwoofer level. Each time you press

the button, the subwoofer level changes as LEVEL 1 =

LEVEL 2 =LEVEL 3 =LEVEL 4 =(back to the

beginning).

Selecting the Sound Modes

This function only affects the playback sound, not your

recording.

You can select one of the 6 preset sound modes (3 surround

modes and 3 SEA—Sound Effect Amplifier—modes).

To select the sound modes, turn the

SOUND MODE control until the sound

mode you want appears on the display.

• As you turn the control, the sound modes change as

follows:

Surround modes*:

D.CLUB : Increases resonance and bass.

HALL : Adds depth and brilliance to the sound.

STADIUM: Adds clarity and spreads the sound, like in an

outdoor stadium.

SEA (Sound Effect Amplifier) modes:

ROCK : Boosts low and high frequency. Good for

acoustic music.

POP : Good for vocal music.

CLASSIC : Good for classical music.

OFF : Cancels the sound mode.

* Surround elements are added to the SEA elements to create

being-there feeling in your room.

When one of these modes is selected, the SOUND MODE

indicator lights up as —

While one of the SEA modes (SEA elements without surround

elements) is selected, the SOUND MODE indicator lights up as

—

When using the remote control, press SOUND MODE to

select the sound mode.

• Each time you press the button, the sound modes change as

follows:

SOUND

MODE

D.CLUB

(Dance CLUB)

OFF

(Canceled)

HALL STADIUM ROCK

POP

CLASSIC

SOUND MODE indicator also

lights up on the display

D.CLUB

(Dance CLUB)

OFF

(Canceled)

HALL STADIUM ROCK

POP

CLASSIC

SUBWOOFER LEVEL indicator always

lights up while the unit is on.

SUBWOOFER

LEVEL

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM12

– 13 –

English

On the unit ONLY:

1

Tune in the station you want to preset (in this

example, of FM 87.50).

• See “Tuning in a Station.”

2

Press SET.

3

Press PRESET + or PRESET – to

select a preset number.

4

Press SET again.

The tuned station in step

1

is stored in the preset number

selected in step

3

.

• Storing a new station on a used number erases the

previously stored one.

When you unplug the AC power cord or if a power

failure occurs

The preset stations will be erased in a few days. If this happens,

preset the stations again.

Tuning in a Preset Station

1

Press FM/AM.

The unit automatically turns on and tunes

in the previously tuned station (either FM

or AM).

• Each time you press the button, the band

alternates between FM and AM.

2

Select a preset number.

On the unit:

Press PRESET + or PRESET –.

On the remote control:

Press the number buttons.

Ex.: For preset number 5, press 5.

For preset number 15, press +10

then 5.

For preset number 20, press +10,

then 10.

For preset number 25, press +10,

+10, then 5.

For preset number 30, press +10, +10, then 10.

Listening to the Radio

Before operating the tuner, make sure you have selected

the correct AM Tuner interval spacing (see page 11).

Tuning in a Station

1

Press FM/AM.

The unit automatically turns on and tunes

in the previously tuned station (either FM

or AM).

• Each time you press the button, the band

alternates between FM and AM.

2

Start searching for stations.

On the unit:

Press and hold TUNING + or

TUNING – for more than 1

second.

On the remote control:

Press and hold 4/1 or

¢/¡ for more than 1 second.

The unit starts searching for stations and

stops when a station of sufficient signal

strength is tuned in.

If a program is broadcast in stereo, the ST

(stereo) indicator lights up.

To stop during searching, press TUNING + or TUNING –

(or 4/1 or ¢/¡ on the remote control).

When you press TUNING + or TUNING –

(or 4/1 or ¢/¡ on the remote control) briefly

and repeatedly

The frequency changes step by step.

To change the FM reception mode

When an FM stereo broadcast is hard to receive or

noisy, press FM MODE on the remote control so

that “MONO” appears and the MONO indicator

also lights up on the display. Reception improves.

To restore the stereo effect, press FM MODE again so that

“STEREO” appears on the display.

In this stereo mode, you can hear stereo sounds when a

program is broadcast in stereo.

Presetting Stations

You can preset 30 FM and 15 AM stations.

In some cases, test frequencies have been already memorized

for the tuner since the factory examined the tuner preset

function before shipment. This is not a malfunction. You can

preset the stations you want into memory by following the

presetting method.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step

2

again.

FM MODE

SET

123

456

789

10

+10

SET

FM

/AM

FM

/AM

VOLUME

VOLUME

+

–

01-13.MXGT700&G500[UW]8.pm6 02.5.23, 3:46 PM13

– 14 –

English

3

If you wish to load a third disc, press

DISC CHANGE on the unit or DISC

SKIP on the remote control.

The disc tray rotates by 120˚.

4

Press 0 again.

The carrousel closes.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

• The disc marker lights up for the disc number you have selected.

• The disc indicator rotates while the corresponding CD is being

played.

• The disc indicator goes off when the unit has detected that there is

no CD on the corresponding disc tray.

Playing Back CDs—All Disc and One Disc

You can play all loaded CDs continuously—All Disc play, or

one selected disc—One Disc play.

All Disc play

1

Load CDs.

• If the current playing source is not the CD player, press

CD 6, then 7 before going to the next step.

2

Press REPEAT repeatedly so that the

ALL DISC indicator lights up on the

display.

• Each time you press the button, the indication on the

display changes as follows:

* See page 17.

Playing Back CDs Continued

CORRECT INCORRECT

Disc number

Disc indicator

DISC

SKIP

Disc marker

DISC CHANGE

This unit has been designed to playback the following CDs:

Audio CD, CD-R, and CD-RW.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs

(CD-ReWritable) can be played back when they are already

“finalized.”

• You can play back your original CD-Rs or CD-RWs

recorded in music CD format ONLY. (If CD-RWs have

been recorded in different format, erase all the data on

CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs

recorded the sound files such as MP3.

• Before playing back CD-Rs or CD-RWs, read their

instructions or cautions carefully.

• Some CD-Rs or CD-RWs may not be played back on this

unit because of their disc characteristics, damage or stain

on them, or if the player’s lens is dirty.

Important notices:

• In general, you will have the best performance by keeping

your CDs and the mechanism clean.

- Store CDs in their cases, and keep them in cabinets or on

shelves.

- Keep the unit’s carrousel closed when not in use.

• Continuous use of irregular shaped discs (heart-shape,

octagonal, etc.) can damage the disc rotating mechanism.

• CD-RWs may require a longer readout time since the

reflectance of CD-RWs is lower than for regular CDs.

Loading CDs

1

Press 0.

The unit automatically turns on and the carrousel

comes out.

2

Place one or two discs correctly on the front

recesses of the disc tray, with its label side up.

• When using a CD single (8 cm), place it on the inner

recess of the disc tray.

REPEAT ALL DISC*REPEAT 1 DISC*

REPEAT 1*

1 DISC

ALL DISC

(initial setting)

.

REPEAT PR

O

Track number Elapsed playing time

Track number of the currently playing disc flashes

(Track numbers exceeding 16 are not displayed.)

14-18.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM14

– 15 –

English

3

Press one of the disc number

buttons (CD1, CD2 or CD3)

for the disc you want to start

to play from.

CD play starts from the first track of the

selected disc.

• Pressing CD 6 instead of the disc number buttons

starts playing back if a CD is on the trays.

To stop during play, press 7.

To remove the disc, press 0.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of

the following sequences.

• When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)

• When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)

• When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)

* When only 2 CDs are loaded, they are played in the same order,

but the disc tray without a CD is skipped.

One Disc play

When 2 or 3 CDs are loaded on the disc trays, you can select

one particular disc to be played back.

1

Load CDs.

• If the current playing source is not the CD player, press

CD 6, then 7 before going to the next step.

2

Press REPEAT repeatedly so that the

1 DISC indicator lights up on the

display.

• Each time you press the button, the indication on the

display changes as follows:

* See page 17.

3

Press one of the disc number

buttons (CD1, CD2 or CD3) you

want to listen.

Playback stops when all tracks of the

selected disc are played once and resumes

to All Disc play.

To stop during play, press 7.

To remove the disc, press 0.

To exit from One Disc play, press REPEAT repeatedly so

that ALL DISC indicator lights up on the display.

The following operations will also cancel the One Disc

play and restore All Disc play when—

• Turning off the power,

• Ejecting the carrousel, or

• Changing the source to play.

REPEAT PR

OG

CD 1

CD 2

CD 3

REPEAT ALL DISC*REPEAT 1 DISC*

REPEAT 1*

1 DISC

ALL DISC

(initial setting)

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press DISC CHANGE to change the CD and the

carrousel comes out.

If you change CDs during play, the current play

will not stop until all CDs you have changed are

played.

To close the carrousel, press DISC CHANGE or 0.

To skip to the another CD in the carrousel

Press DISC SKIP on the remote control.

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on the

display.

To resume play, press CD 6 again.

To locate a particular point in a track

During play, press and hold 1 or ¡.

•1: Fast reverses the disc.

•¡: Fast forwards the disc.

When using the remote control, press and hold

4/1 or ¢/¡.

To go to another track

Press 4 or ¢ repeatedly before or during

playback.

•4: Goes back to the beginning of the current

or previous tracks.

•¢: Skips to the beginning of the next or succeeding

tracks.

When using the remote control, press 4/1 or ¢/¡

before or during playback.

If you press and hold 4 or ¢ on the unit before

playing

The track number keeps changing until you release it.

To go to another track directly using the number

buttons

Pressing the number button(s) before or during play allows

you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10,

then 5.

For track number 20, press +10,

then 10.

For track number 32, press

+10, +10, +10, then 2.

123

456

789

10

+10

DISC CHANGE

DISC

SKIP

CD

CD 1

CD 2

CD 3

14-18.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM15

– 16 –

English

Programing the Playing Order of the Tracks

—–Program Play

You can arrange the order in which the tracks play before you

start playing. You can program up to 32 tracks.

• To use Repeat play (see page 17) for Program play, press

REPEAT after starting Program play.

On the unit ONLY:

1

Load CDs.

• If the current playing source is not the CD player, press

CD 6, then 7 before going to the next step.

2

Press PROGRAM so that

“PROGRAM” appears on the

display.

The PRGM (program) indicator also lights up on the

display.

• All Disc play is selected automatically. You cannot

select One Disc play for Program play.

• If a program has been stored in memory, the program is

called up.

3

Press one of the disc number

buttons (CD1, CD2, and CD3) to

select the disc number you want

to play.

4

Press 4 or ¢ to select the track number,

then press SET.

Each time you select a track and press SET, the selected

track number is added to the track number indicator.

Track number

Disc number Program step number

SET

CD 1

CD 2

CD 3

PROGRAM R

A

CANCEL

/

DEMO

CD

5

Program other tracks you want.

• To program tracks from the same disc, repeat step

4

.

• To program tracks from a different disc, repeat steps

3

and

4

.

6

Press CD 6.

The tracks are played in the order you

have programed.

To stop during play, press 7.

To exit from Program play, press PROGRAM again before

or after play so that the unit enters All Disc play. (The

program you have made is stored in memory until you turn

off the unit, eject the carrousel, or erase the program.)

• Program play is also canceled when you press 0.

To modify the program

Before playing, you can erase the last programed

track shown on the display by pressing

CANCEL/DEMO.

• Each time you press the button, the last

programed track is erased from the program.

To check the program during play, press 4 (or ¢) so

that the playing track will change according to the program

(or reverse) order. When using the remote control, press

4/1 (or ¢/¡).

To add tracks in the program before play, simply select the

disc numbers and/or track numbers you want to add by

following steps

3

and

4

of the programing procedure.

To erase the entire program before or during play, press 7

twice.

• Turning the power off or ejecting the carrousel will also

erase the stored memory.

If you try to program a 33rd track

“FULL” will appear on the display.

If your entry is ignored

You have tried to program a track from an empty tray, or a track

number that does not exist on the CD. Such entries are ignored.

Continued

14-18.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM16

– 17 –

English

Playing at Random—–Random Play

The tracks of the selected CD will play at random.

• To use Random play, you have to cancel the Program play.

1

Load a CD.

2

Press one of the disc number

buttons (CD1, CD2, and CD3)

for the disc you want to play,

then press 7.

3

Press RANDOM so that “RANDOM”

appears on the display.

The RANDOM indicator also lights up on the

display.

• Activating Random play cancels Repeat play or All Disc

play. (One Disc play is automatically selected.)

• The tracks are played automatically at random. Random

play ends when all tracks are played once.

To stop during play, press 7.

To exit from Random play, press RANDOM again during

play so that the unit enters All Disc play.

• Random play is also canceled when you press 0.

If you press 4 or ¢

Skips to the next track selected randomly.

Repeating Tracks or CDs—–Repeat Play

You can have all the CDs, the program or the individual track

currently playing repeat as many times as you like.

• Repeat play and Random play cannot be used at the same

time.

To repeat play, press REPEAT during or before

playing.

• Each time you press the button, Repeat play

changes as follows, and the following indicator

lights up on the display:

REPEAT 1 : Repeats one track on one CD.

REPEAT 1 DISC** : Repeats all the tracks on one CD.

REPEAT ALL DISC: Repeats all the tracks on all the CDs,

or all the tracks on the program.

*See pages 14 and 15.

** REPEAT 1 DISC is not used for Program play.

To cancel Repeat play, press REPEAT repeatedly until the

REPEAT indicator (REPEAT 1, REPEAT 1 DISC or

REPEAT ALL DISC) goes off from the display.

• Repeat play is also canceled when you press 0.

Prohibiting Disc Ejection—–Tray Lock

You can prohibit CD ejection from the unit and can lock the

carrousel.

• This operation is possible only while the unit is on with CD

selected as the source.

On the unit ONLY:

To prohibit disc ejection, press 0 for the carrousel while

holding 7.

“LOCKED” appears for a while, and the carrousel is locked.

To cancel the prohibition and unlock the carrousel, press

0 for the carrousel while holding 7.

“UNLOCKED” appears for a while, and the carrousel is

unlocked.

If you try to eject CDs

“LOCKED” appears to inform you that the Tray Lock is in use.

M

RANDOM

REPEAT ALL DISC REPEAT 1 DISC

REPEAT 1

1 DISC*

ALL DISC*

CD 1

CD 2

CD 3

REPEAT PR

O

14-18.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM17

– 18 –

English

Playing Back Tapes

Playing Back a Tape

1

Press EJECT (0) for the deck you want to

use.

2

Put a cassette in, with the exposed part of the

tape down and the side you want to play

facing front.

• You can play back only type I tapes.

3

Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck

which you have put a cassette into is selected.

To operate the other deck, press TAPE A or TAPE B

(or TAPE A/B on the remote control).

4

Press TAPE 33

33

3.

The tape play starts and the tape running

indicator (3) starts flashing slowly.

When the tape plays to the end, the deck

automatically stops.

The use of the C-120 or thinner tape is not

recommended, since characteristic deterioration

may occur and this tape easily jams in the pinch-

rollers and the capstans.

To stop during play, press 7.

To operate the other deck, press TAPE A or TAPE B (or

TAPE A/B on the remote control), then TAPE 3.

To fast-forward the tape, press ¡ (or ¢/¡ on the

remote control). The tape running indicator (3) starts

flashing quickly.

To rewind the tape, press 1 (or 4/1 on the remote

control). The tape running indicator (2) starts flashing

quickly.

To remove the cassette, press 0 EJECT for deck A or

EJECT 0 for deck B.

TAPE

For Deck A

For Deck B

14-18.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM18

– 19 –

English

Recording a Tape on Deck B

On the unit ONLY:

1

Press EJECT 0 for deck B.

2

Put a recordable cassette in, with the exposed

part of the tape down and the side you want

to record facing front.

3

Close the cassette holder gently.

4

Start playing the source—FM, AM, CD

player or auxiliary equipment connected to

AUX IN jacks.

• For duplicating tapes, see “Dubbing Tapes” on page 20.

• For recording from CD, see “CD Synchronized

Recording” on page 20.

5

Press REC START/STOP.

The REC (recording) indicator lights up on the

display and recording starts.

To stop during recording, press REC START/STOP again

or 7.

To remove the cassette, press EJECT 0 for deck B.

Recording

IMPORTANT:

•It may be unlawful to record or play back copyrighted

material without the consent of the copyright owner.

• The recording level is automatically set correctly, so it is

not affected by the VOLUME, the SUBWOOFER LEVEL,

and the SOUND MODE controls. Thus, during recording

you can adjust the sound you are actually listening to

without affecting the recording level.

• While recording, you can hear sound modes through the

speakers or headphones. However, the sound is recorded

without these effects (see page 12).

• If recordings you have made have excessive noise or static,

the unit may be too close to a TV. Place the unit away from

the TV.

• You can use type I tape for recording.

To protect your recording

Cassettes have two small tabs

on the back to protect

unexpected erasure or re-

recording.

To protect your recording,

remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette decks

become dirty, the following will occur:

• Impaired sound quality

• Discontinuous sound

• Fading

• Incomplete erasure

• Difficulty in recording

To clean the head, capstan, and pinch roller

Use a cotton swab moistened with alcohol.

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at

electronics and audio shops).

Head

Capstan

Pinch roller

Erase head

REC START

/STOP

C

D

S

T

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM19

– 20 –

English

CD Synchronized Recording

You can easily record a CD onto a tape.

• You can also record the tracks in order you have made the

program.

On the unit ONLY:

1

Put a recordable cassette into deck B.

2

Place a disc correctly on the recess of the disc

tray, with its label side up.

3

Press one of the disc number buttons (CD1,

CD2, and CD3) to select the disc, then 7.

4

Press CD REC START.

“CD REC” appears, and the REC (recording)

indicator lights up on the display.

Deck B starts recording and the CD player starts playing.

When the recording is done, the CD player and deck B

stop.

To stop during CD Synchronized Recording, press REC

START/STOP or 7 .

To remove the cassette, press EJECT 0 for deck B.

Dubbing Tapes

On the unit ONLY:

1

Press TAPE 3, then 7.

2

Put the source cassette in deck A, and a

recordable cassette into deck B.

3

Press DUBBING.

Dubbing starts.

“DUBBING” appears, and the REC

(recording) indicator lights up on the display.

To stop during dubbing, press REC START/STOP or 7 .

To remove the cassette, press 0 EJECT for deck A and

EJECT 0 for deck B.

TAPE

A

RT

P

CD REC

START DU

B

R

EC

A

RT DUBBING

CD 1

CD 2

CD 3

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM20

– 21 –

English

To apply an echo to your voice

Press ECHO on the remote control so that the

echo ( ) indicator lights up on the display.

Each time you press the button, the echo level changes as

follows:

ECHO 2 applies stronger echo effect to your voice.

Microphone Mixing

When you use microphone with any playback source, follow

the procedure below.

1

Turn MIC LEVEL to MIN.

2

Connect the microphone (not

supplied) by plugging it into the MIC jack.

3

Start playing the source—CD, tape or other

connected component.

4

Turn MIC LEVEL and VOLUME

controls as you sing into the

microphone.

• By pressing REC START/STOP, you

can record your singing along. (For

more details, see page 19.)

To stop during recording, press

REC START/STOP again or 7.

To use microphone only

Without any background sound, you can use your

microphone and record it.

1

Connect the microphone.

2

Press CD 6, then 7.

No background sound will be heard.

3

Turn MIC LEVEL and VOLUME

controls as you sing into the

microphone.

• By pressing REC START/STOP, you

can record your singing. (For more

details, see page 19.)

To stop during recording, press

REC START/STOP again or 7.

You can enjoy singing along (Karaoke) and microphone

mixing.

IMPORTANT:

• Always set the MIC LEVEL to MIN when connecting

or disconnecting the microphone.

• When you do not use the microphone, keep the

microphone unconnected.

If howling or squealing (feedback) occurs while using the

microphone, take the following actions to prevent these

noises.

• Adjust the MIC LEVEL and VOLUME controls.

• Avoid pointing the microphone towards the speakers.

Singing Along—Karaoke

Vocal Masking

Vocal Masking reduces the lead vocal of the playing souce

and allows you to replace it by singing into the microphone

as the music plays.

• This function cannot be used for multiplex discs or tapes.

1

Turn MIC LEVEL to MIN.

2

Connect the microphone (not

supplied) by plugging it into the

MIC jack.

The karaoke indicator ( ) lights up on the display.

3

Start playing the source—CD, tape or other

connected component.

4

Press KARAOKE on the remote

control repeatedly.

Each time you press the button, Vocal Masking

turns on (V.MASK) and off (OFF).

V.MASK : Reduces the vocals.

OFF : Cancels Vocal Masking (normal stereo

playback).

5

Turn MIC LEVEL and VOLUME

controls as you sing into the

microphone.

When you finish singing, cancel the

Karaoke function by pressing

KARAOKE.

• By pressing REC START/STOP, you

can record your singing along. (For

more details, see page 19.)

To stop during recording, press REC START/STOP again

or 7.

If you use the following sources as the playing source

for Vocal Masking, you cannot get the satisfactory

results

• Radio programs—a radio signal is not as reliable as the signals

coming from a tape or CD.

• Monaural sources.

• Poorly dubbed tapes.

• Sources recorded with duets, strong echo, a chorus, or only a few

instruments.

Using the Microphones

KARAOKE

ECHO 1 ( )

ECHO OFF ( )

ECHO 2 ( )

CD

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM21

– 22 –

English

2

Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the

unit enters on-time setting mode.

3

Set the on-time you want the unit to

turn on.

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then

press SET.

“OFF TIME” appears for 2 seconds, then

the unit enters off-time setting mode.

4

Set the off-time you want the unit

to turn off (on standby).

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then

press SET.

The unit enters source selecting mode.

5

Press 4 or ¢ to select the

source to play, then press SET.

• Each time you press 4 or ¢, the source

changes as follows:

TUNER FM : tunes in to a specified preset FM station.

= go to step

6

.

TUNER AM : tunes in to a specified preset AM station.

= go to step

6

.

CD : plays a disc from the first track.

= go to step

7

.

TAPE : plays a tape in deck A or B.

= go to step

7

.

AUX : plays an external source.

= go to step

7

.

Using the Timers

There are three timers available—Daily Timer, Recording

Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the

unit. (See “Setting the Clock” on page 10.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or

radio program. You can set the timer whether the unit is on or

off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the

preset level, and starts playing the specified source when the

on-time comes (the indicator flashes while the timer is

operating). Then, when the off-time comes, the unit

automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step

1

again.

• If you have made a mistake while setting timer, press

CANCEL/DEMO. (However, this does not always work. If

CANCEL/DEMO does not work, press CLOCK/TIMER

repeatedly and start from step

1

again.)

Before you start...

•When using a CD as the source to play:

—Make sure there is a CD on the currently selected

disc number tray.

•When using a tape as the source to play:

—Make sure that a tape is in the deck whose deck

indicator (A or B) is lit on the display.

•When using the external component as the source to

play:

—Set the timer equipped with the external component

at the same time.

On the unit ONLY:

1

Press CLOCK/TIMER repeatedly

until “DAILY” appears on the display.

indicator lights up and the DAILY (daily

timer) indicator starts flashing on the display.

• Each time you press the button, the clock/timer setting

modes change as follows:

DAILY

Canceled ON TIME

(Recording Timer)

CLOCK

(See page 10.)

RECON TIME

(Daily Timer)

CD

TUNER FM TUNER AM

TAPE

AUX

CLOCK

/

TIMER

CLOCK

/

TIMER

SET

SET

SET

Continued

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM22

– 23 –

English

6

Select the preset station

number.

Press 4 or ¢ to select the preset

station number, then press SET.

The unit enters volume setting mode.

7

Press 4 or ¢ to set the volume

level.

• You can select the volume level from VOL

MIN, VOL 1 — VOL 30, and VOL MAX.

8

Press SET to complete the Daily

Timer setting.

The DAILY (daily timer) indicator stops

flashing and remains lit. The settings you have

done are shown on the display in sequence for your

confirmation.

9

Press STANDBY/ON to

turn off the unit (on standby)

if you have set the Daily Timer

with the unit turned on.

If the unit is turned on when the timer-on time comes

Daily Timer does not work.

To turn on or off Daily Timer after its setting is done

1

Press CLOCK/TIMER repeatedly until

“DAILY” appears on the display.

2

To turn off the Daily Timer, press

CANCEL/DEMO.

The DAILY (daily timer) indicator goes off

from the display (“OFF” appears for a while).

The Daily Timer is canceled, but the setting

for the Daily Timer remains in memory until

you change it.

To turn on the Daily Timer, press SET.

The DAILY (daily timer) indicator lights up

on the display. The settings you have done are

shown on the display in sequence for your

confirmation.

Using Recording Timer

With Recording Timer, you can make a tape of a radio

broadcast automatically. You can set the timer whether the

unit is on or off.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified

station, sets the volume level to “VOL MIN,” and starts

recording when the on-time comes (the indicator flashes

while the timer is operating). Then, when the off-time comes,

the unit automatically turns off (stands by).

Recording Timer works only once, but the timer setting

remains in memory until you change it.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step

2

again.

• If you have made a mistake while setting the timer, press

CANCEL/DEMO. (However, this does not always work. If

CANCEL/DEMO does not work, press CLOCK/TIMER

repeatedly and start from step

2

again.)

On the unit ONLY:

1

Put a recordable cassette into deck B.

2

Press CLOCK/TIMER repeatedly

until “REC” appears on the display.

indicator lights up and the REC (recording

timer) indicator starts flashing on the display.

• Each time you press the button, the clock/timer setting

modes change as follows:

3

Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the unit

enters on-time setting mode.

DAILY

Canceled ON TIME

(Recording Timer)

CLOCK

(See page 10.)

RECON TIME

(Daily Timer)

SET

SET

CLOCK

/

TIMER

CANCEL

/

DEMO

SET

CLOCK

/

TIMER

CLOCK

/

TIMER

STANDBY/ON

STANDBY

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM23

– 24 –

English

4

Set the on-time you want the unit to

turn on.

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute,

then press SET.

“OFF TIME” appears for 2 seconds, then

the unit enters off-time setting mode.

5

Set the off-time you want the unit to

turn off (on standby).

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then

press SET.

The unit enters preset station selecting

mode.

6

Select the preset station.

1) Press 4 or ¢ to select the band

(“TUNER FM” or “TUNER AM”), then

press SET.

2) Press 4 or ¢ to select a preset channel

number, then press SET.

The REC (recording timer) indicator stops

flashing and remains lit. The settings you

have done are shown on the display in

sequence for your confirmation.

7

Press STANDBY/ON to

turn off the unit (on standby) if

necessary.

About the recording source

If you change the source while recording, the recording source also

changes.

To turn on or off Recording Timer after its setting is

done

1

Press CLOCK/TIMER repeatedly until

“REC” appears on the display.

2

To turn off the Recording Timer, press

CANCEL/DEMO.

The REC (recording timer) indicator goes off

from the display (“OFF” appears for a while).

The Recording Timer is canceled, but the

setting for the Recording Timer remains in

memory until you change it.

To turn on the Recording Timer, press SET.

The REC (recording timer) indicator lights up

on the display. The settings you have done are

shown on the display in sequence for your

confirmation.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.

You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time

length passes.

On the remote control ONLY:

1

Press SLEEP.

The time length until the shut-off time appears

and the SLEEP indicator starts flashing on the

display.

• Each time you press the button, the time length changes

as follows:

2

Wait for about 3 seconds after specifying the

time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press

SLEEP once so that the remaining time until the shut-off time

appears for about 3 seconds.

To change the shut-off time, press SLEEP repeatedly until

the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until “OFF”

appears on the display so that the SLEEP indicator goes off

from the display.

• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what

happens if the setting for these timers overlaps.

Here are some examples.

•Recording Timer has priority over Daily Timer.

If Recording Timer is set to come on while Daily Timer is

operating, Daily Timer is canceled and Recording Timer

start working.

•If Sleep Timer overlaps with another timer (either Daily

Timer or Recording Timer), a timer with the earlier shut-off

time has priority.

When using the Recording Timer and Sleep Timer at the

same time, pay special attention to the shut-off time.

Recording Timer

22:00

21:30

Sleep Timer

22:30

21:00

SET

SET

SET

CLOCK

/

TIMER

CANCEL

/

DEMO

SET

SLEEP

STANDBY/ON

STANDBY

SLEEP10

OFF

(Canceled)

SLEEP20 SLEEP30 SLEEP60

SLEEP90SLEEP120

Daily Timer

7:00

6:30

Recording Timer

7:30

6:00

canceled.

canceled.

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:47 PM24

– 25 –

English

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling cassette tapes

• If the tape is loose in its cassette, take up

the slack by inserting a pencil in one of

the reels and rotating.

• If the tape is loose, it may get stretched,

cut, or caught in the cassette.

• Be careful not to touch the tape surface.

• Avoid the following places to store the

tape:

— In dusty places

— In direct sunlight or heat

— In moist areas

— Near a magnet

Handling discs

• Remove the disc from its case by

holding it at the edge while pressing the

center hole lightly.

• Do not touch the shiny surface of the

disc, or bend the disc.

• Put the disc back in its case after use to

prevent warping.

• Be careful not to scratch the surface of

the disc when placing it back in its case.

• Avoid exposure to direct sunlight,

temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight

line from center to edge.

DO NOT use any solvent—such as

conventional record cleaner, spray, thinner, or

benzine—to clean the disc.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily

stained, wipe it with a cloth soaked in water-diluted neutral

detergent and wrung well, then wipe clean with a dry cloth.

•Avoid the following since they may cause damage to the

unit.

- DO NOT wipe it with a hard cloth.

- DO NOT wipe it strong.

- DO NOT wipe it with thinner or benzine.

- DO NOT apply any volatile substance such as

insecticides to it.

- DO NOT allow any rubber or plastic to remain in

contact with it for a long time.

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:48 PM25

– 26 –

English

Action

Press CANCEL/DEMO on the unit. (See

page 9.)

Check all connections and make

corrections. (See pages 6 to 8.)

• Reconnect the antennas correctly and

securely.

• Change the position and direction of the

AM loop antenna.

• Extend the FM antenna at the best

position.

Clean or replace the disc. (See page 25.)

• Plug the AC power cord.

• Unlock the carrousel. (See page 17.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Cancel the Vocal Masking. (See page 21.)

Unplug the AC power cord and then plug it

back in.

• Remove the obstruction.

• Replace the batteries.

Symptom

Unable to cancel the display demonstration.

No sound is heard.

Hard to listen to broadcasts because of

noise.

The disc sound is discontinuous.

The carrousel does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Stereo effect is lost.

Operations are disabled.

Unable to operate the unit from the remote

control.

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,

such as your dealer, for service.

Troubleshooting

Cause

Other buttons are pressed to cancel the

display demonstration.

Connections are incorrect or loose.

• Antennas are disconnected.

• The AM loop antenna is too close to the

unit.

• The FM antenna is not properly extended

and positioned.

The disc is scratched or dirty.

• The AC power cord is not plugged in.

• The carrousel is locked.

The disc is placed upside down.

Power supply from the AC power cord has

been cut off while the tape was running.

Small tabs on the back of the cassette are

removed.

Vocal Masking is activated.

The built-in microprocessor may

malfunction due to external electrical

interference.

• The path between the remote control and

the remote sensor on the unit is blocked.

• The batteries are exhausted.

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:48 PM26

– 27 –

English

CA-MXGT700

Amplifier section

Output Power

SUBWOOFERS : 110 W per channel, min. RMS, driven into

6 Ω at 63 Hz with no more than 10% total

harmonic distortion.

MAIN SPEAKERS: 55 W per channel, min. RMS, driven into

4 Ω at 1 kHz with no more than 10% total

harmonic distortion.

Audio input sensitivity/Impedance

(at 1 kHz, measured at MAIN SPEAKERS)

AUX : 400 mV/50 kΩ

MIC : 5 mV/5 kΩ

Digital output: DIGITAL OUT (OPTICAL)

Signal wave length : 660 nm

Output level : –21 dBm to –15 dBm

Speakers/Impedance : Subwoofers : 6 Ω – 16 Ω

Main speakers : 4 Ω – 8 Ω

Tuner

FM tuning range : 87.50 MHz – 108.00 MHz

AM tuning range: 531 kHz – 1 602 kHz

(at 9 kHz intervals)

530 kHz – 1 710 kHz

(at 10 kHz intervals)

CD player

CD Capacity : 3 CDs

Dynamic range : 85 dB

Signal-to-noise ratio : 85 dB

Cassette deck

Frequency response

Normal (type I): 50 Hz — 14 000 Hz

Wow and flutter : 0.15% (WRMS)

Specifications

General

Power requirement : AC 110 V / AC 127 V/ AC 220 V / AC

230 V — AC 240 V , adjustable

with the voltage selector, 50 Hz / 60 Hz

Power consumption : 145 W (at operation)

19 W (on standby)

Dimensions (approx.): 270 mm x 317 mm x 449 mm (W/H/D)

Mass (approx.) : 9.1 kg

Supplied accessories

See page 6.

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:48 PM27

– 28 –

English

CA-MXG500

Amplifier section

Output Power

SUBWOOFERS : 80 W per channel, min. RMS, driven into

6 Ω at 63 Hz with no more than 10% total

harmonic distortion.

MAIN SPEAKERS: 40 W per channel, min. RMS, driven into

4 Ω at 1 kHz with no more than 10% total

harmonic distortion.

Audio input sensitivity/Impedance

(at 1 kHz, measured at MAIN SPEAKERS)

AUX : 400 mV/50 kΩ

MIC : 5 mV/5 kΩ

Digital output: DIGITAL OUT (OPTICAL)

Signal wave length : 660 nm

Output level : –21 dBm to –15 dBm

Speakers/Impedance : Subwoofers : 6 Ω – 16 Ω

Main speakers : 4 Ω – 8 Ω

Tuner

FM tuning range : 87.50 MHz – 108.00 MHz

AM tuning range: 531 kHz – 1 602 kHz

(at 9 kHz intervals)

530 kHz – 1 710 kHz

(at 10 kHz intervals)

CD player

CD Capacity : 3 CDs

Dynamic range : 85 dB

Signal-to-noise ratio : 85 dB

Cassette deck

Frequency response

Normal (type I): 50 Hz — 14 000 Hz

Wow and flutter : 0.15% (WRMS)

Design and specifications are subject to change without notice.

General

Power requirement : AC 110 V / AC 127 V/ AC 220 V / AC

230 V — AC 240 V , adjustable

with the voltage selector, 50 Hz / 60 Hz

Power consumption : 130 W (at operation)

17 W (on standby)

Dimensions (approx.): 270 mm x 317 mm x 449 mm (W/H/D)

Mass (approx.) : 8.8 kg

Supplied accessories

See page 6.

19-28.MXGT700&G500[UW]8.pm6 02.5.23, 3:48 PM28

ANTENNA

FM 75 AM

[ ]

VOLTAGE

SETTING

220

127

240

110

230-

220

127

240

110

VOLTAGE

SETTING

230-

AUX IN

MAIN SPEAKER SUBWOOFER

[ ]

RR

LL

[ ]

4-8 6-16

DIGITAL OUT

(OPTICAL)

VICTOR COMPANY OF JAPAN, LIMITED

0502KSMMDWSAM

EN, SP, PR

J

V

C

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,

Australia, and U.K.)

Instrucción sobre la línea de la red (CA) (no aplicable para Europa,

EE.UU., Canadá, Australia, ni el Grã-Bretanha)

Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a

Europa, os E.U.A., o Canadá, a Austrália e o Reino Unido)

IMPORTANT for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line voltage

corresponds with the position of the voltage selector switch provided

on the outside of this equipment and, if different, reset the voltage

selector switch, to prevent from damage or risk of fire/electric shock.

IMPORTANTE para la línea de la red (CA)

ANTES DE ENCHUFAR EL EQUIPO, compruebe si la tensión de la

línea de la red (CA) corresponde con la posición del selector de

tensión situado en la parte exterior del equipo, y si es diferente,

reajuste el selector de tensión para evitar el riesgo de incendios/

descargas eléctricas.

IMPORTANTE para a ligação à tensão da rede (CA)

ANTES DE LIGAR O APARELHO A UMA TOMADA DA REDE,

verifique se a tensão da rede CA corresponde à posição do seletor de

voltagem localizado na parte externa deste equipamento. Caso não

corresponda, reajuste o seletor de voltagem a fim de evitar avarias ou

riscos de incêndio e choque elétrico.

MXGT700&G500COVER[UW]8.pm6 02.5.23, 3:44 PM2

VICTOR COMPANY OF JAPAN, LIMITED

EN. SP. PR. 0205NSMMDWSAM

SPEAKER SYSTEM

SP-MXG500

MANUAL DE INSTRUCCIONES: SISTEMA DE ALTAVOCES

INSTRUÇÒES: SISTEMA DE ALTIFALANTES

Thank you for purchasing JVC speakers.

Before you begin using them, please read the instructions carefully

to be sure you get the best possible performance. If you have any

questions, consult your JVC dealer.

Le estamos muy agradecidos por haber adquirido estos altavoces

de JVC. Antes de utilizarlos, sirvase leer las instrucciones

detenidamente a fin de obtener el mejor rendimiento posible. Si

tienenaluna pregunta, acuda a su agente de JVC.

Gratos pela aquisição dos altifalantes JVC.

Antes de desfrutar este sistema, leia atentamente as instruções

que o acompanham, de modo a assegurar-se da obtenção do

melhor desempenho possível. Caso surjam dúvidas concernentes

a este sistema, consulte o seu agente JVC.

INSTRUCTIONS

— SAFETY INSTRUCTIONS —

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

Switch off using the switch on the equipment and make sure that

your family know how to do this.

Special arrangements may need to be made for infirm of

handicapped people.

DON’T use equipment such as personal stereos or radios so that

you are distracted from the requirements of traffic safety. It is

illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can

permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with

curtains or soft furnishing.

Overheating will cause damage and shorten the life of the

equipment.

DON’T use makeshift stands and NEVER fix legs with wood

screws — to ensure complete safety always fit the manufacturer’s

approved stand or legs with the fixings provided according to the

instructions.

DON’T allow electrical equipment to be exposed to rain or

moisture.

ABOVE ALL

– NEVER let anyone, especially children, push anything into

holes, slots or any other opening in the case.

– this could result in a fatal electrical shock;

– NEVER guess or take chances with electrical equipment of

any kind

– it is better to be safe than sorry!

This equipment has been designed and manufactured to meet

international safety standards but, like any electrical equipment,

care must be taken if you are to obtain the best results and safety

is to be assured.

Do read the operating instructions before you attempt to use the

equipment.

Do ensure that all electrical connections (including the mains

plug, extension leads and interconnections between pieces of

equipment) are properly made and in accordance with the

manufacturer’s instructions. Switch off and withdraw the mains

plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installa-

tion, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt

about it working normally, or if it is damaged in any way — switch

off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous

voltages.

DON’T leave equipment switched on when it is unattended un-

less it is specifically stated that it is designed for unattended op-

eration or has a standby mode.

LVT0932-001A

[UY. UW]

1

SP-MXG500[UW/UY]1.pm65 23/4/02, 1:30 PM2

Connection

Conexión

Ligaçao

CONNECTION

• DON'T use other amplifier to operate this speaker system except

for CA-MXG500.

• Turn off power to the whole system before connecting the speak-

ers to the amplifier.

• The maximum power handling capacity of the SP-MXG500 main

speaker is 40 W/subwoofer is 80 W. Excessive input will result in

abnormal noise and possible damage.

In cases where the signals described below are applied to the

speakers, even if the signals are below the maximum allowable

input, they may cause an overload and burn the wiring of the

speakers. Be sure to lower the amplifier volume beforehand.

1) Noise during FM tuning.

2) High level signals containing high frequency components pro-

duced by a tape deck in the fast forward mode.

3) Click noise produced when turning power of other components

on and off.

4) Click noise produced when connecting or disconnecting cords

with the power on.

5) Click noise produced when the cartridge is replaced with the

power on.

6) Click noise produced when operating amplifier switches.

7) Continuous high frequency oscillation or high pitch electroni-

cally produced musical instrument sound.

8) Howling when using a microphones.

Black

Negra

Preto

Left speaker

Altavoz izquierdo

Altifalante esquerdo

Right speaker

Altavoz derecho

Altifalante direito

SPECIFICATIONS

Type : 3-way 3-speaker Bass-Reflex Type

Speakers

Subwoofer : 13.5 cm cone × 1

Main woofer : 13.5 cm cone × 1

Tweeter : 5.0 cm cone × 1

Power Handling Capacity

Subwoofer : 80 W

Main Speaker : 40 W

Impedance

Subwoofer : 6 Ω

Main Speaker : 4 Ω

Frequency Range

Subwoofer : 32 Hz ~ 87 Hz

Main Speaker : 87 Hz ~ 20 000 Hz

Sound Pressure Level

Subwoofer : 84 dB/W·m

Main Speaker : 82 dB/W·m

Dimensions (W × H × D) : 282 mm × 318 mm × 322 mm

Mass : 5.0 kg each

Design and specifications subject to change without notice.

Amplifier output terminals

Terminales de salida de amplificador

Terminais de saida do amplificador

Blue

Azul

Azul

Red

Rojo

Vermelho

Black

Negra

Preto

MAIN SPEAKER SUBWOOFER

4-8

[ ]

6

[ ]

RR

LL

-16

R L

2

CONEXIÓN

• NO utilice ningún otro amplificador para operar este sistema de

altavoces excepto CA-MXG500.

• Desactive la alimentación de todo el sistema antes de conectar

los altavoces al amplificador.

• La capacidad máxima de potencia del altavoz principal del SP-

MXG500 es de 40 W y la del altavoz de subgraves es de 80 W.

En casos donde las señales descritas más abajo se apliquen a

los altavoces, aunque las mismas resulten menores que la entrada

máxima permisible, pueden causar una sobrecarga y quemar el

cableado de los altavoces. Asegúrese de disminuir el volumen

del amplificador con anterioridad.

1) Ruido durante la sintonía en FM.

2) Señales de alto nivel que contengan componentes de alta

frecuencia producidos por un magnetófono en el modo de

avance rápido.

3) Ruidos de conmutación provocados al encender y apagar otros

componentes.

4) Ruido de conmutación al conectar o desconectar cables con

los componentes encendidos.

5) Ruido de conmutación cuando se reemplaza la cápsula con

los componentes encendidos.

6) Ruido de conmutación provocados por la operación de los

selectores del amplificador.

7) Continua oscllación de alta fracuencia o de sonidos de tonos

altos provocados por instrumentos electrónicos.

8) Aullidos al utilizar micrófonos.

LIGAÇÃO

• NÃO use outro amplificador para operar este sistema de

altifalantes à excepção do CA-MXG500.

• Desligue a alimentação de todo o sistema antes de iniciar as

ligações dos altifalantes ao amplificador.

• A potência efectiva máxima do altifalante principal do SP-MXG500

é de 40 W; a do subwoofer é de 80 W.

Uma entrada excessiva resultará em ruídos anormais e possíveis

avarias.

Nos casos em que os sinais descritos abaixo apresentem-se nos

altifalantes, mesmo que os sinais estejam abaixo do nível de

entrada permissível, poderão causar uma sobrecarga e o curto-

circuito dos fios dos altifalantes. Certifique-se de reduzir o vol-

ume do amplificador de antemão.

1) Interferências durante a sintonia de FM.

2) Sinais com níveis elevados e com componentes de alta

frequência produzidos pelo deck de cassetes durante o modo

do avanço rápido.

3) Estalidos produzidos quando do ligar/desligar da alimentação

de outros componentes.

4) Estalidos produzidos ao se ligar/desligar cabos de ligação com

a alimentação ligada.

5) Estalidos produzidos quando da troca da célula fonocaptadora

com a alimentação ligada.

6) Estalidos produzidos quando do activar/desactivar dos

interruptores do amplificador.

7) Oscilação contínua das altas frequências ou altas tonalidades

electronicamente produzidas por sons de músicas

instrumentais.

8) Efeito de realimentação acústica (microfonia) quando da

utilização de microfone.

ESPECIFICAÇÕES

Tipo : Reflector de graves de 3 vías e 3

altifalantes

Altifalantes

Subwoofer : Cónico de 13,5 cm × 1

Woofer principal : Cónico de 13,5 cm × 1

Tweeter : Cónico de 5,0 cm × 1

Potência efectiva

Subwoofer : 80 W

Altifalante principal : 40 W

Impedância

Subwoofer : 6 Ω

Altifalante principal : 4 Ω

Amplitude de frequência

Subwoofer : 32 Hz–87 Hz

Altifalante principal : 87 Hz–20 000 Hz

Nível da pressão sonora

Subwoofer : 84 dB/W·m

Altifalante principal : 82 dB/W·m

Dimensões

(larg. × alt. × prof.) : 282 mm × 318 mm × 322 mm

Peso : 5,0 kg cada

Desenho e especificações sob reserva de alterações sem aviso

prévio.

ESPECIFICACIONES

Tipo : Reflex bajo con 3-altavoces y 3 vias

Altavoces

De subgraves : Tipo cónico de 13,5 cm × 1

Principal : Tipo cónico de 13,5 cm × 1

De agudos : Tipo cónico de 5,0 cm × 1

Capacidad de potencia

De subgraves : 80 W

Principal : 40 W

Impedancia

De subgraves : 6 Ω

Principal : 4 Ω

Gama de frecuencias

De subgraves : 32 Hz–87 Hz

Principal : 87 Hz–20 000 Hz

Nivel de presión acústica

De subgraves : 84 dB/W·m

Principal : 82 dB/W·m

Dimensiones (An × Al × Prf) : 282 mm × 318 mm × 322 mm

Peso : 5,0 kg cada uno

El diseño y las especificaciones están sujetos a cambio sin previo

aviso.

3

SP-MXG500[UW/UY]1.pm65 23/4/02, 1:30 PM3

Connection

Conexión

Ligaçao

CONNECTION

• DON'T use other amplifier to operate this speaker system except

for CA-MXG500.

• Turn off power to the whole system before connecting the speak-

ers to the amplifier.

• The maximum power handling capacity of the SP-MXG500 main

speaker is 40 W/subwoofer is 80 W. Excessive input will result in

abnormal noise and possible damage.

In cases where the signals described below are applied to the

speakers, even if the signals are below the maximum allowable

input, they may cause an overload and burn the wiring of the

speakers. Be sure to lower the amplifier volume beforehand.

1) Noise during FM tuning.

2) High level signals containing high frequency components pro-

duced by a tape deck in the fast forward mode.

3) Click noise produced when turning power of other components

on and off.

4) Click noise produced when connecting or disconnecting cords

with the power on.

5) Click noise produced when the cartridge is replaced with the

power on.

6) Click noise produced when operating amplifier switches.

7) Continuous high frequency oscillation or high pitch electroni-

cally produced musical instrument sound.

8) Howling when using a microphones.

Black

Negra

Preto

Left speaker

Altavoz izquierdo

Altifalante esquerdo

Right speaker

Altavoz derecho

Altifalante direito

SPECIFICATIONS

Type : 3-way 3-speaker Bass-Reflex Type

Speakers

Subwoofer : 13.5 cm cone × 1

Main woofer : 13.5 cm cone × 1

Tweeter : 5.0 cm cone × 1

Power Handling Capacity

Subwoofer : 80 W

Main Speaker : 40 W

Impedance

Subwoofer : 6 Ω

Main Speaker : 4 Ω

Frequency Range

Subwoofer : 32 Hz ~ 87 Hz

Main Speaker : 87 Hz ~ 20 000 Hz

Sound Pressure Level

Subwoofer : 84 dB/W·m

Main Speaker : 82 dB/W·m

Dimensions (W × H × D) : 282 mm × 318 mm × 322 mm

Mass : 5.0 kg each

Design and specifications subject to change without notice.

Amplifier output terminals

Terminales de salida de amplificador

Terminais de saida do amplificador

Blue

Azul

Azul

Red

Rojo

Vermelho

Black

Negra

Preto

MAIN SPEAKER SUBWOOFER

4-8

[ ]

6

[ ]

RR

LL

-16

R L

2

CONEXIÓN

• NO utilice ningún otro amplificador para operar este sistema de

altavoces excepto CA-MXG500.

• Desactive la alimentación de todo el sistema antes de conectar

los altavoces al amplificador.

• La capacidad máxima de potencia del altavoz principal del SP-

MXG500 es de 40 W y la del altavoz de subgraves es de 80 W.

En casos donde las señales descritas más abajo se apliquen a

los altavoces, aunque las mismas resulten menores que la entrada

máxima permisible, pueden causar una sobrecarga y quemar el

cableado de los altavoces. Asegúrese de disminuir el volumen

del amplificador con anterioridad.

1) Ruido durante la sintonía en FM.

2) Señales de alto nivel que contengan componentes de alta

frecuencia producidos por un magnetófono en el modo de

avance rápido.

3) Ruidos de conmutación provocados al encender y apagar otros

componentes.

4) Ruido de conmutación al conectar o desconectar cables con

los componentes encendidos.

5) Ruido de conmutación cuando se reemplaza la cápsula con

los componentes encendidos.

6) Ruido de conmutación provocados por la operación de los

selectores del amplificador.

7) Continua oscllación de alta fracuencia o de sonidos de tonos

altos provocados por instrumentos electrónicos.

8) Aullidos al utilizar micrófonos.

LIGAÇÃO

• NÃO use outro amplificador para operar este sistema de

altifalantes à excepção do CA-MXG500.

• Desligue a alimentação de todo o sistema antes de iniciar as

ligações dos altifalantes ao amplificador.

• A potência efectiva máxima do altifalante principal do SP-MXG500

é de 40 W; a do subwoofer é de 80 W.

Uma entrada excessiva resultará em ruídos anormais e possíveis

avarias.

Nos casos em que os sinais descritos abaixo apresentem-se nos

altifalantes, mesmo que os sinais estejam abaixo do nível de

entrada permissível, poderão causar uma sobrecarga e o curto-

circuito dos fios dos altifalantes. Certifique-se de reduzir o vol-

ume do amplificador de antemão.

1) Interferências durante a sintonia de FM.

2) Sinais com níveis elevados e com componentes de alta

frequência produzidos pelo deck de cassetes durante o modo

do avanço rápido.

3) Estalidos produzidos quando do ligar/desligar da alimentação

de outros componentes.

4) Estalidos produzidos ao se ligar/desligar cabos de ligação com

a alimentação ligada.

5) Estalidos produzidos quando da troca da célula fonocaptadora

com a alimentação ligada.

6) Estalidos produzidos quando do activar/desactivar dos

interruptores do amplificador.

7) Oscilação contínua das altas frequências ou altas tonalidades

electronicamente produzidas por sons de músicas

instrumentais.

8) Efeito de realimentação acústica (microfonia) quando da

utilização de microfone.

ESPECIFICAÇÕES

Tipo : Reflector de graves de 3 vías e 3

altifalantes

Altifalantes

Subwoofer : Cónico de 13,5 cm × 1

Woofer principal : Cónico de 13,5 cm × 1

Tweeter : Cónico de 5,0 cm × 1

Potência efectiva

Subwoofer : 80 W

Altifalante principal : 40 W

Impedância

Subwoofer : 6 Ω

Altifalante principal : 4 Ω

Amplitude de frequência

Subwoofer : 32 Hz–87 Hz

Altifalante principal : 87 Hz–20 000 Hz

Nível da pressão sonora

Subwoofer : 84 dB/W·m

Altifalante principal : 82 dB/W·m

Dimensões

(larg. × alt. × prof.) : 282 mm × 318 mm × 322 mm

Peso : 5,0 kg cada

Desenho e especificações sob reserva de alterações sem aviso

prévio.

ESPECIFICACIONES

Tipo : Reflex bajo con 3-altavoces y 3 vias

Altavoces

De subgraves : Tipo cónico de 13,5 cm × 1

Principal : Tipo cónico de 13,5 cm × 1

De agudos : Tipo cónico de 5,0 cm × 1

Capacidad de potencia

De subgraves : 80 W

Principal : 40 W

Impedancia

De subgraves : 6 Ω

Principal : 4 Ω

Gama de frecuencias

De subgraves : 32 Hz–87 Hz

Principal : 87 Hz–20 000 Hz

Nivel de presión acústica

De subgraves : 84 dB/W·m

Principal : 82 dB/W·m

Dimensiones (An × Al × Prf) : 282 mm × 318 mm × 322 mm

Peso : 5,0 kg cada uno

El diseño y las especificaciones están sujetos a cambio sin previo

aviso.

3

SP-MXG500[UW/UY]1.pm65 23/4/02, 1:30 PM3

VICTOR COMPANY OF JAPAN, LIMITED

EN. SP. PR. 0205NSMMDWSAM

SPEAKER SYSTEM

SP-MXG500

MANUAL DE INSTRUCCIONES: SISTEMA DE ALTAVOCES

INSTRUÇÒES: SISTEMA DE ALTIFALANTES

Thank you for purchasing JVC speakers.

Before you begin using them, please read the instructions carefully

to be sure you get the best possible performance. If you have any

questions, consult your JVC dealer.

Le estamos muy agradecidos por haber adquirido estos altavoces

de JVC. Antes de utilizarlos, sirvase leer las instrucciones

detenidamente a fin de obtener el mejor rendimiento posible. Si

tienenaluna pregunta, acuda a su agente de JVC.

Gratos pela aquisição dos altifalantes JVC.

Antes de desfrutar este sistema, leia atentamente as instruções

que o acompanham, de modo a assegurar-se da obtenção do

melhor desempenho possível. Caso surjam dúvidas concernentes

a este sistema, consulte o seu agente JVC.

INSTRUCTIONS

— SAFETY INSTRUCTIONS —

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

Switch off using the switch on the equipment and make sure that

your family know how to do this.

Special arrangements may need to be made for infirm of

handicapped people.

DON’T use equipment such as personal stereos or radios so that

you are distracted from the requirements of traffic safety. It is

illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can

permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with

curtains or soft furnishing.

Overheating will cause damage and shorten the life of the

equipment.

DON’T use makeshift stands and NEVER fix legs with wood

screws — to ensure complete safety always fit the manufacturer’s

approved stand or legs with the fixings provided according to the

instructions.

DON’T allow electrical equipment to be exposed to rain or

moisture.

ABOVE ALL

– NEVER let anyone, especially children, push anything into

holes, slots or any other opening in the case.

– this could result in a fatal electrical shock;

– NEVER guess or take chances with electrical equipment of

any kind

– it is better to be safe than sorry!

This equipment has been designed and manufactured to meet

international safety standards but, like any electrical equipment,

care must be taken if you are to obtain the best results and safety

is to be assured.

Do read the operating instructions before you attempt to use the

equipment.

Do ensure that all electrical connections (including the mains

plug, extension leads and interconnections between pieces of

equipment) are properly made and in accordance with the

manufacturer’s instructions. Switch off and withdraw the mains

plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installa-

tion, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt

about it working normally, or if it is damaged in any way — switch

off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous

voltages.

DON’T leave equipment switched on when it is unattended un-

less it is specifically stated that it is designed for unattended op-

eration or has a standby mode.

LVT0932-001A

[UY. UW]

1

SP-MXG500[UW/UY]1.pm65 23/4/02, 1:30 PM2