Jvc Tv 13140 Users Manual
JVC TV/VCR or DVD Combo Manual L9070297 JVC TV/VCR or DVD Combo Owner's Manual, JVC TV/VCR or DVD Combo installation guides
TV 13140 L9070297
TV 13140 to the manual bab55459-b1ac-4d79-a612-7c60cc42ec86
2015-01-23
: Jvc Jvc-Tv-13140-Users-Manual-325909 jvc-tv-13140-users-manual-325909 jvc pdf
Open the PDF directly: View PDF 
.
Page Count: 28
TV-13140
OPERATING INSTRUCTIONS
J
Ivusl
SQPB
4 HEAD
®TV/VCRCOMBO
USER'S GUIDE
For model:
TV-13140
I
_IM_!
te_s_
sta_le
!
e_c_
_¢
LDIi
eir
!an
SerialNumber
Mar.1999 No.51546
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PANTS
INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
The lightning flaSh with arrowhead symbOl,
within an equilateral Idangle is inteuffeq to
alert the user to the presence of
uninsulateq dangerous voltage within the
products enclosure that may be nt
sufficient magnitude to constitute a risk of
electric shock to persons.
l_e exclamation point within an equilateral
_t_ncsie Is intead_l _aleri the u_r to _
presence of imp_kqnt _ecaitng and
maintenance (servicing) instruct_ns in the
literofure ac_mdat_ng the al_lian_.
WARNING:
CAUTION:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE 1;HIS APPLIANCE TO
RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG W_TH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This equipment has been tested and found to comply with the limJtefor aClass B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful intederence in a residential installation.This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radiocommunications.
However, there is no guarantee that interference will not occurIn aparticular installation. If this
equipment does cause harmful interference to radio or telavisk_ reception, which can be
determined by taming the equipment Offand on, the user is encouraged to try correcting the
interference by one or more of the following measures:
- Reohent or relocate the receiving antenna.
" Inoraase the saperation between the equipment and receNer.
- Connect the equiprnent into an outlet on a circuit dtifereot from that to which the receiver is connected.
- Consuit the dealer or an experienced redio/'P4 tachnician fo( holp.
CAUTION: Changes or modifications not expressly approved by the party responsible for cOmpliance with the
FCC Rules could void the user's authority to operate this equipment.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
Atl the safety and operating instructionsshould be reed before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructionsshould be retained for future reference.
3. HEED WARNINGS
All warnings on the unitand in the operating instructionsshould be adhered to.
4. FOLLOW INSTRUCTIONS
All operatidg and use instructionsshould be teliowed.
5. CLEANING
Unplug this unit from the walloutist before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the unit's manufacturer a,sthey n_y cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in awet
basement, or near a swimming pool. PORTABLECARTWARNING
8. ACCESSORIES (wmbe__ WRETAC)
Do not place this unit on an unstable cart, stand_tripod, bracket, or table. _/1_'_
The unit may fall, causing sehous injury, and serious damage to the unit.
Use only with a cart, stand, tdpod, bracket, or table recommended by the
rnanufecture_
8A, An appliance and cart combinabon should be moved with care. Quick stops,
excessive force, and uneven sudaces may cause the appUEtnceand cart
combination to overturn.
9, VENTILATION S3126A
Slots and openings in the cabinet and in the back or beltom are provided for ventilation, and to ensure reliable
operation of the unit, and to protect it from overheating. These openings must not be bk_xed or covered. The
openings should never be blocked by placing the unit on abed, sofa, rug, or other similar surface. This unit
should never be placed near or over a radiator or heat source. This unit should not be placed in a buiit-la
installations such as a bookcase or Pack unless proper ventilation is provided or the manufacturer's lastructions
have been adhered to.
10. POWER SOURCES
This unit shouid be operated only from the type of power source indicated on the rating plate. If you are not sure
of the type of power supply to your home, consutiyour appliance dealer or local power compan_ For units
intended to operate from batte,'y power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized altam_ng-currant line plug (a plug having one blade wider than the othe0.
This plug will fit into the power outlet only one wa_ This is a safety feature. If you are unable to insert the plug
fully into the outlat, try reversing the plug. If the plug should stiUfail to fit, contact your etocthoisn to replace your
obsolete outlet. Do not defeat the safety purpose of the polarizeq plug, if your unit is equipped with a 3-wire
grounding-type plug, aplug having a third (grounding) pin. This plug will only fit intoa grounding-type power
ouitet. This too, is a safety feature, If you are ur_ble to insert the plug into the outlet, contact your eleotricisn to
replace your obsolete outlet.
Do notdefeat the safety purpe6e of the grounding-type plug.
1
IMPORTANT SAFEGUARDS (CONTINUED)
12. POWER-CORD PROTECTION
Power-supply COrdsshould be muted _o that they are not likelyto be walked on or pinched by items placed
upon or ngaJnal them, paying padiCUtar attentJon to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
TOprotect your unit from a lightning storm, orwhen it is Left unattended and unused for tong periods of time,
unplug it from the wall oupot and disconnect the antenna or cable system. This will prevent damage to the unit
due to lightningand power line surges,
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electdc lightor
power circuits, orwhere it can fall into such power lines or circuits. When installin_gan outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be
fatal.
15. OVERLOADING
DO not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECTAND UQUID ENTRY
DO not push objects through any openings inthis unit, as they may touch dangerous voltage points or short out
ports that could result in fire or alectric shock. Never splflor spray any type of liquid into the unit.
17- OUTDOOR ANI1ENNA GROUNDING
it an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges, Sec_on 810 of the NaSonal
EI_ Code, ANSI/NFPA 70, provides informationwith respect to proper grounding of the mast and support-
ing structure, grounding of the leed-to wire to an antenna discharge unit, size of grounding conductors, ic_.atidn
of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERV]ClNG
DO not attempt to service this unit yourselfas opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. it liquid has been spilled, Or objects have fallen into the unit,
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructidq_. Adjust only those controls
that are covered by the operating instructions,as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the unit to its normal
operation.
e. If the unit has been dropped or the Cabinet has been damaged.
hWhen the unit exhibits a distinctchange in performance, this indicates aneed for service.
20. REPLACEMENT PANTS
When replacement parts are required, be sure the service technician uses replacement parts spealfied by the
manufacturer or those that have the _me characteristics as the original pod.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to pedorm safety checks to
determine that the unit is In proper oporatLngcondition.
22. WALL OR CEILING MOUNTING
The product should be mounted to awall or ceiling only as recommended by the manufacturer
23, HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (inCludingamplifiers) that produce heat,
24, NOTE TO CA'P/SYSTEM INSTALLER
This reminder is provided to call the CAW system inalaltsr's attention to Article 820.40 of the NEC that provides
guidelines for prober grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the buildtog,as close to the point of cable entry as practical.
EXAMPLEOF ANTENNAGROUNDINGAS PERTHE
NATIONALELECTRICALCODE
GROUND
_CLAMP
ELECTRIC
SERVICE
NEC-NATIONAL ELECTRICAL CODE
S2898A
ZNTENNA
LEAD IN
WIRE
u_ ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
"O.NO,NGGONOUCTORSEC SECTION 810-21)
GROUND CLAMPS
-- POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
o, 2 3
4_ FEATURES TABLE OF CONTENTS
Color "13/With Video CaSsette Recorder - Unique space saving design combines a13"color TV and a video
cassette recorder.
High QUality Picture Technofogy -This TV/VCR equipped "HQ °incorporates VHS High Quality technology, A peiti-in
detail enhancer is used to boost the reCorded signal and provide maximum picture quality dudng playback,
it is compatible with other VHS video cassette recorders,
SQPB -Tapes recorded in the S-VHS system can be played back simply on this WNCR,
4 Video Heads -Provides optimal picture quality for special effects playback,
Frequency Synthesized Tuner -Ejecttonically locks inand memorizes all available channels for pedect reception
with the touch of a button,
181 Channel Tuner -Receives standard VHF and UHF broadcast channels and up to 113 cable channels, The
actual number of channels received depends upon channai reception in your area or your cable system.
Unified I_/NCR Random Access Remote Control -This remote controlailews operating various TV and VCR
functions from the comfort of your favodle viewing position,
Clo_md Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for headng
impairedviewers.
8-ProgramrJ 1-Month Programmable Timer With Everyday/Every Week Capability -The balti-in timer allows
automatic ai_enlee recording of up to 8 33/programs within 1 month. It is also possible to record a program which is
broadcast at the same time everyday or every week.
Auto Clock Set - Once your TV/VCR is pluged into the AC outlet, it automatically sets the correct date and time.
On-Screen "rv DiSplay And VCR Programming -When you select a channel or make other changes, the TV willshow
an indicator on the screen for a few seConds. Timer recording can be programmed and confim_ed on the screen.
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote controladjustment
of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Automatic Pleybeck/Rewthd-Stop-Eject -When loading acassette tape without the erase prevention tab, this TV/
VCR will automatically play beck the cassette tape at the Correct speed. When a tape reaches its end dudng play-
back, recording (except dunng ITR and Timer Record) and last forward, it will au ornaticstly sop, rewind, stop and
ejectthetape,
Programmable ON/OFF Timer - Allews you to automatically turn on or off your TVNCR at a set time.
Programmable 13/Sleep 'Timer-Operablefromthe remotecontroltheTV can be programmed up to 12O minutes
to turn off automatically.
Full Load Tape Transport - Permits rapid access between modes.
Automatic Repeat Play System - When Auto Repeat option is turned on, the TVNCR will automatically play back
the same cassette tape repeatedly.
Instant Timer Recording (rrR - Simply by pressing the REC and PLAY buttons, the TV/VCR can be programmed
for upto 5 hours of record ng with an mmediata stad.
Audle/VIdee Inpot/Oofput Jacks - A VCR or other video device may be hooked up-to this TV/VCR for dubbing or
playback purposes.
2 Speed Picture Sellrch -3 or 5 times normal speed in SP mode (9X or 15X in EP).
2 Speed Record/Playback - Records and plays two tape speeds (SP, EP).
Real Time Tape Counter With Zero Return -The counter displays the real tape time and the zero return can be
used to return the tape to a presalectad pesitJon (00:00:(30) while the counter can be used to locate programs.
Ditillel Auto Tracking. Automatically adjusts tracking during playback for the best posSible picture.
On-Screen 3 Language DlsplBy - YOUcan select one of 3 languages, English, Spanish or French for on-screen
programming.
4
it is recommended that you carefully read the descriptions and Operating procedures contained in this
User's Guide prior to operating your new TV/VCR.
/\
PRECAUTIONS ...................................................................................................................................................... 6
LOCATION OF CONTROLS ................................................................................................................................... 8
REMOTE CONTROL .............................................................................................................................................. 9
ANTENNA CONNECTIONS .................................................................................................................................. 11
CABLE 13/CONNECTLONS ................................................................................................................................. 12
SETTING LANGUAGE .......................................................................................................................................... 13
AUTO CLOCK SETTING ...................................................................................................................................... 14
MANUAL CLOCK SETTING ................................................................................................................................. 16
TV OPERATION .................................................................................................................................................... 17
TO MEMORIZE CHANNELS ................................................................................................................................ 21
PICTURE CONTROL ADJUSTMENTS ................................................................................................................ 24
TO SET THE ON TIMER ....................................................................................................................................... 26
TO SET THE OFF TIMER ..................................................................................................................................... 27
LOADING AND UNLOADING AVIDEO CASSETTE ............................................................................................ 28
PLAYBACK ........................................................................................................................................................... 29
SPECIAL PLAYBACK ........................................................................................................................................... 31
RECORDING ATV PROGRAM ............................................................................................................................ 33
iNSTANT TIMER RECORDING (ITR) ................................................................................................................... 35
TIMER RECORDING ............................................................................................................................................ 36
OTHER FUNCTIONS FOR THE TIMER RECORDING ........................................................................................ 38
USING THE REAL TIME TAPE COUNTER .......................................................................................................... 40
USING ZERO RETURN ........................................................................................................................................ 41
DUPLICATING A VIDEO TAPE ............................................................................................................................. 42
RECEPTION DISTURBANCES ............................................................................................................................ 43
TROUBLESHOOTING GUIDE .............................................................................................................................. 44
VIDEO HEAD CLEANING ..................................................................................................................................... 46
SPECIFICATIONS ................................................................................................................................................ 47
5
PRECAUTIONS
MOISTURE CONDENSATION
DO NOT OPERATE ANy FUNCTIONS ON THIS UNIT FOR AT LEAST _OR
THREE HOURS WHEN MOISTURE IN THE AIR CONDENSES ON I1: LET THE
UNIT STAND WITH POWER ON (SEE BELOW),
•WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for exammple,water vapor in the air will
condense on the surface of the _less. This is called moisture cOndensation.
•MOIETURE WiLL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;
• When you move the unitfrom a cold to a warm place.
•After heating a cold room or under extremely humid conditions.
•WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
Plug the power cord into an AC outlet, set the POWER switch to ON and leave the
unit at tcom temperature until moisture condensation disappears,
Depending on the surroundingconditions,this may take two or three hours.
Head Drum
Vkl_ _pe
•If you cause astatic discharge when touching the _
unit, and the unit fails to function, simply unplug the
unit from the wall ouitet, wait afew minutes, and
p;ug it beck in. The unit should return to normal
operation. _t
Avoid extreme heat.
rAvold extreme cold. •
_De notplace the unit on or near appliances which
may cause elecbomagnetic interference (e.g.
speakers, etc), 0oicg so may cauee erraticoperatiol
of the unit includingpicture and/_r soL_nddistoriio_ or
noise.
"-Avoid extreme moisture and dust,
!J
.
The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid
covering the hotes wi_ soft materials such as cloth
--De not insert fingers or any other objects into the
cas_etta laading SlOLDo not spray cleaner or w_x
directly on the unit or use forced air to remove dust.
_Avoid places subject to strong vibration. Use in a
horizontet (flat) I_ition only.
f_Keep the unit away from flower vases, sinks, etc. If
tiquids should be spilled into the unff, serous
damage will result. If you spill any liquids into the
unit, unplug the AC power cord immediately and
cortsultqualified service personnel before attempting
to use it again. .._
f
rWhen you finish operating the unit, always unload
the cassette and turn off the power.
When you leave your home for a long time, unplug
the AC power cord.
OK
1
1
rTo protect the unit from alightn_g storm, unpfugth_
AC power cord from the wall outlet and diSconneCt
E
the antenna.
WIDER HOLE
AND BLADE
PolarizedAC Cord
(One bladeis widerthan the other.)
POWER SOURCE
TO USE AC POWER SOURCE
Use the AC pol_Ldzed line cord provided for operation onAC. Insert
the AC cord plug into a standard 120V 60Hz poledzed AC outlet.
NOTE:
1. Never connect the AC line cord plug to other than the specified
voltage (120V 60Rz). Use the attached power cord only.
2. If the pelerized AC cord does notfit into a non-polarfzed AC
outlet, do not attempt to file or cut the blade, it is the user's
responsibility to have an electrician replace the obsolete ouheL
3. If you cause a static discharge when touching the unit, and the
unit fails to function, simply unplug the unit, from the AC outlet,
wait an hour, and plug it back in. The unitshould rotum to ncrmal
operation.
=6 7
(3) LOCATION OF CONTROLS REMOTE CONTROL
FRONT fREAR
23 4 5 6
\ \ ! /
7 8 9 10 11 12 13 14 15 16 17
DESCRIPTION OFCONTROLS
FRONT:
f
18 19 20 21
1. Cauette Loading Slot - To insert or remove a
videotape.
2. REC IITR Button. Press once to start normal
recording. Additional presses activate thstant Timer
Recording.
3. REW (Rewind) Button - In the Stop mode. this
button rapidly winds the tape backwards. Inthe Play
mode, this buttonactivates reverse search.
4, PLAY Button. Press to play a prerecorded tape.
5. FF (Fast Forward) Sutton - In the Stop mode, this
button rapidly winds the tape forward. In the Play
mode, this button activates forward search.
6. STOP/EJECT Button -Press once to stop the tape
in any mode. Press again to eject the tape.
7. Headphone Jack - Plug monaural headphones or
an earphone with an 1/8" miniplug into this jack for
private listening.
8, AUDIO/VIDEO IN Jacks -Audio and video signal
cables from an estemal source can be connected
here.
9. INPUT Selector Button -Switches the program for
viewing between the VCR and an external input
SOurCe.
10, SP/EP Selector Button -Sets the tape speed for
recording,
22
23
DESCRIPTION OF CONTROLS
1. TIMER Button - Used to set the TV/VCR to start 14. PAUSE Button - During recording, this button
recording at a preset lime. temporarily stops the tape. During playback, it stops
2` INPUT Selector Button -Switches the wograrn tor the tape aho dlsptays a still image on the TV screen.
viewing between the VCR and extemai inputsources. 15, SLEEP Button - Sets the TV to tam off automatically
11. CHANNEL +/- Suttorm -Press to saiect a channel 3. CALL Button. Displays the present it meJday of the
for viewing or recording, week, channel, counter, speed Selection (and VCR
12, VOLUME + I - Buttons -Press to raise or lower the rhode if VCR la playing) on the TV screen.
volume of the sOUnd. 4. W/CAP/TEXT Button - Switches between Caption,
13. REC Indloator - Lightswhan the "rv/vCR is recordlag, Text and TV modes for Ciosed-Captlondd programs.
14, REC TIMER Indicator - This lights when the TIMER 5. REW (Rewind) Button -Inthe Stop mode, this
button is pressed, button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
15. ON TIMER Indicator -This indicator lights up when 6. REC sutton -Press once together with the PLAY
the powered up. It also lights up when ON TIMER button to start normal recording. Additional presses
program is turned ON while power is OFF. activate InstantTimer Recording.
16. POWER Button. Press to turn the TV/VCR on or off. 7, MUTING Button -Press to rum off the sound. Press
17. Remote Sensor. Signals from the Remote Control
are received here.
REAR:
18. VHF/UHF Antenna Jack - Connect the 75 ohm
coaxial cable from the antenna or Cabie TV service
to this jack.
19. VIDEO/AUDIO IN Jacks -Audio and video signal
cables from an external source can be connected
hera.
20. VIDEO/AUDIO OUT Jacks -Used to outpJt audio
and video signals to a TV, amplifier or VCR.
21, AC Power Cord - Connect to a 120V. 60Hz outlet.
again to turn the sound back on.
8, CANCEL Button -Press to canCel existing setups or
to restore default values.
9, ENTER Button - Press to enter selected Setup.
10. POWER Button -Press to tam the TV/VCR on.
Press again to tom the TVNCR off,
11. COUNTER RESET Button -Used to reset the
counter to 00:00:00.
12. RETURN Button -Switches between the present
channel and the last channai selected.
13. FF (Fast Forward) Button -In the Stop mode, this
button rapidlywinds the tape forward, in the Play
mode, this button activates forward search,
after up to 120 minutes.
16, MENU Button - Press to display the On-Screen menu
function.
17. SP/EP Selector Button - Sets the tape speed for
recording.
18. Direct Channel Selection Buttons (0-9) -Allows
direct access to any channel,
19. Digital AUTO TRACKING Buttons -Allows automatic
or manual adjustment of tracking to minimize picture
noise during playback.
20, STOP Button - Press once to stop the tape.
21, CHANNEL + /- Buttons -Press the + button to
change to ahigher numbered channel set into rnen_P_
Press the -button to change to a lower numbered
channel set into rnemo_
22. PROGRAM Button -Press to confirm the programmed
timer recording and ON/OFF timen
23. ZERO RETURN Button °Use to stop the tape when
the counter reaches 00:03:00.
24, pLAY Sutton °Press to play a prerecorded tape.
25. VOLUME ÷ /- Buttona - Press the + button to
increase, or the - buttc_nto decrease the volume lavai.
26, SET + /-Euttons - Used to select the option in the
menu or set timer recording, ON/OFF t_ner, channel
set, picture adjustment, auto repeat, clock and
language. 9
REMOTE CONTROL (CONTINUED)ANTENNA CONNECTIONS
BATTERY INSTALLATION
HSlide the pattery compart-
ment cover inthe direction
of the arrow. Install two =AA" (penlightsize) batteries, paying
attention to the poladty
diagram in the battery compartmenL
Replace the compadment
cover,
BATTERY PRECAUTIONS
r
The precautions below should be followedwhen using batteries inthis device:
1. Use only the size and type of batteries specified,
2. Be sure to followthe correct pufadty when installing the batteries as indicated in the battery comparirnent.
Reversed bederies may cause damage to the device.
3. Do not mixdifferent types of battebes together (e.g. Alkaline and Carbon-zinc) or old pettebes with fresh
ones,
4, If the device is not to be used for a long period of time, remove the baifer;es to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Folk_w
battery manufacturer's directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
•0
NOTE: • When them is an obstacle between the TVNCR and the transmitter, the transmitter may notoperate.
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
Remote sensor of the TV/VCR, the remote operation may be unstable.
If you are using outdoor antenna (outdoor antenna not included), follow the instructions below that
commpond to your antenna system, If you are using a cable TV service (CAW), see page 13 for Cable
"IV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination VHF/
IUHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300 ohm
_A_IONHGM_ twin-lead wire, the use of the 300-75 ohm matching
transformer may be necessary,
75 OHM
COAXIAL
CABLE
TRANSFORMER
(not included)
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
•Connect the UHF 300 ohm twin-lead wire to the
OHM
MATCHING
TRANSFORMER
(not included)
VHF 300 ohm
COMBINER
(not included) UHF 300 ohm
combiner (not supp4ied), Connect the VHF 300 ohm
twin-lead wire to the 300-75 ohm matching trans-
former, Attach the transformer to the combiner, then
attach the combiner to the antenna jack.
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm e_,ble and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
COMBINER to the antenna jack.
(not included)
10 11
co CABLE TV CONNECTIONS SETTING LANGUAGE
This TV/VCR has an extended tuning range and can tune most cable channels without using a Caele TV converter This TVNCR can display the on =creen language in English, Spanish m French.
box Some cable companies offer "premium pay channels" in which the signal is scrambled Descrambling these Language selection (step 3) will automatically appear on the screen when you press the MENU button
signals for normal viewing requires the use of a descrameler device which is generally provided by the cable company toltlally. Select language to use the other menu options.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
75 OHM VHF
COAXIAL CABLE UHF
For basic cable service not requiring a converteddescramhler box,
connect the CATV 75 ohm coaxial cable directly to the antenna jack
on the back of the TV/VCR.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a converter/descrameler box, connect the incoming
75 ohm coaxial cable to the convett er/descrarnbler box Using another 75 ohm coaxial cable, connect the output jack
of the converter/descramble r box to the antenna jack on the TVNCR Follow the connections shown below Set the
TVNCR to the output channel of the converter/de.scrambler box (usually channel 3 or 4) and use the converter/
descrambler box to select channels
I
Hress the MENU buttonPreSs the SET + or - button to select the
SYSTEM SET-UP option, then press the
ENTER button SET+
SET _FF
Press the SET + or - button to select the
LANGUAGE option, then press the ENTER
button,
$_¢T÷
s_rI / *,_-,,_-,'P o_
•0A_P_dT _Vl_r_ TI4E
INCOMING
75 OHM
CATV CABLE 75 OHM CABLE
'I DESCRAMBLERCONVERTER/ I '(_
I TO TVNCR
VHF
UHF
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you Subscdbe to acable TV senrice in whichbasic channels are unscrambled and premium channels require the
use of a converter/descram bier box, you may wish to use a signal splitter and an A/B switch box (available from the
Cable company or an electronics supp4y store). Follow the connections shown below, With the switch in the "B"
position, you can directlytune any nonscrambk3dchannels on your TVNCR. With the switch in the =A" position, tune
your TVNCR to the output of the converter/descrameler box (usually channel 3 or 4) and use the converter/
descrarnbler box to tune scrameled channels,
I,NM, OONVE E
7_CoO_NG DESCRAMBLER 75 OHM CABLE
CATV CABLE TO TVNCR
LITI_R A/B SWITC m
VHF
UHF
12
Press the SET + or - button to select the
desired language: English (ENGLISH), Spanish
(ESPAi_OL) or French (FRANCAIS), then press
the ENTER button,
SET+
SET-
b_J4
ESpAK,OL
H ress the MENU iouitontwice to return to
normal TV viewing. /
13
AUTO CLOCK SEI-I'ING
The Auto Clock feature enables the automatic dock selling and updating, and elso to set the Time Zone and Daylight
Saving Time by receiving XDS (Extended Data Sarv_".e) information carried on the channel signal.
YOU must set the antenna connection before the AC cord plug Is Insetted Into the AC outlet.
AUTO CLOCK SL=I"rlNG
B WAIT 30 MINUTES! whenthepower
switch is off, alter the connections of the
antenna and the power I_ug. Because the Auto
Clock selling feature is activato.
After the clock is set automatically, you may have to set
the Time Zone and Daylight Saving Time.
Press the POWER button to turn on the TVNCR after
the Auto Cleck operation compleated.
•Whe_ shipped fromtoctoP/, the AUTO CLOCK
optionis set to AUTO poaltion.
•If you tum the TVNCR on inAuto Cfock setting,the
ctockis notset.
• Wgh cable box connec_on, if the Auto C_ockSetting
is unsuccessful,please select the PBS channel
carryingthe XDS information, then turn the TV/VCR
off.After 30 minutes, turn the TV/VCR on, and ifthe
clockis notset automa_cally,set the clock manuall_
(sae page 16.)
DAYLIGHT SAVING TIME SEI-rlNG
Youcansetthe Daylightsavingtimeautomaticallyormanually.
B Pre_ the MENU button. Press the SET + or -
button to select the SYSTEM SET-UP option,
then press the ENTER button.
SET+
___ Press the SET + or - button to select the
DAYLIGHT SAVING TIME option, then press the
ENTER button.
SET+
SEt'-
L
TIME ZONE SETTING (STANDARD TIME)
_m Press the MENU bullon. _r=_l_ PresstheSET+or-button_ UelngtheSET+or-button,'_ml
PresstheSET÷or-bullonto to select th_ STANDARD seleotyour_meZone, then
select the SYSTEM SET-UP TIME option, then press the press the ENTER button. I
Ioption, then press the ENTER button. ENTER button. Press the MENU button until the
•SeT* MENU screen is cleared.
_J
SET_ | TIf4ER _C SElf
| CH_TJJp {;LOCK _0_¢F SET-- CENTP_L 1_4J_rAm
press the SET + or -buttunfo select one of the
optlens, then press the ENTER button. Press the
MENU button untilthe MENU screen iscleared,
$_'r +
SET- l _ON
OFF
_UTO
ON: for manual setting
(forward one hour)
OFF: for manual setting
(bock one hour)
AUTO: for automatic setting
(read XDS in the elgnai)
When you want to set the Daylight Saving _me manuall,
on the first Sunday in Aprilyou set to =ON', and o_ the last
Sunday in October you set to "OFF_.
N_T_:eAllerAutoC_ocksetting_ins_mecasethec_ckrnaydisplaytheothertimez_nels_Y_ucancorreotthec_ck NOTE: •WhenshippedfromtactoPJ, theDAYLIGHTSAVINGTIMEoptionissettoAUTOposition.
by selecting your Time Zone setting above. • When the clock is not set, Daylight Saving Time setting is not available,
• When the alock is not set or you set the clock manually, Time Zone setting is not available. •When there is no Daylight Saving Time inyour area, always select OFF positionin step 3.
=14 15
MANUAL CLOCK SETTING TV OPERATION
You must set the date and time manually for timer recordings, ON/OFF Timer and Daylight Saving Time If
the AUto Clock process did not _them correctly,
EXAMPLE: Setting the clockto _8:30 AM', 23th (SAT) October, 1999.
ill tose, thosYsTE.
SET-Up option, then press the ENTER button.
SET<-
-"(d_kTERMENU)
Press the SET + or - bulton to seleut the CLOCK
SET option, then press the ENTER button,
SET+
SET- _SET
i ST_VJ_ T_
press the SET + or - budcn
to set the month, then press
the ENTER button.
SET÷
Sat the day, year and time
as instop 3.
SEt-+
After setting the clock, date an_ time"_
startsfunctioning automatically.
NOTE: • After a power lallure or disconnection of the power plug, the time display will be lost. In this case, set the
present grne again if the Auto Clock did not set correctly.
• If you want to conect the digits while setting, press the CANCEL button until the item you want to correct,
then press the SET+ or - buttonto correct the desired setting.
16
U TOtom on the TV/VCR,
press the POWER button. Adjust tbe voiome leval bypressing the VOLUME +or -
button. The volume Levelwill
be indicated on the screen by green
bar. AS the volume level increases,
so do the number of ber_ If the
volume decreases, the number of
green bar also decreases.
Set the TV/CA'rV menuoptionto the appropriate
position. (See page 21 .)
[CTVATV_VHFL_I"FTvCChhaannnnt/_sI
VHF/UHF/CATV CHANNELS
1"/ CAW
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 t4-36
(A) (W)
37-59
/(_'_'-.=J.,_ I I (_'_)=_(zzz_I
95-99
(A-S)(A-l)
100-125
(SA)
_Pressthe Direct Channel selec0orlbuttonsto select the channel.
W mode direct channel indention -/
When the W/CAW menu option is in the TV position,ell channels can be instantlyselected by using two
buttons, (forexample, to select chan,lts2, pre_.s"0", then "2". If you press only"2",channelselection willbe delayed for/
a few seconds.) For channels 10 and above, press the 2 digitsin order. 0 1 2
When the TV/CATV menu optionis in the CAW portion, channels P.anbe sts_t_d as to_iows:
TO SELECT CATV CHANNELS:
1-9 Press "0"twice, than 1-9 as needed. (Example,to select channel 2, press 002.)
10-12 Press "0",then the remaJning2 digits. (Example, toselect channel t2, press 012,)
100-125 Press the 3 digits in orbed,(Example, to select channel 120, press 120.)
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.
NOTE: •If a channel with no broadcast is selected, the sound will automatically be muted.
•If a station being viewed stops broadcasting, the "IV will automatically shut itself oft after 15 minutes.
17
TV OPERATION (CONTINUED)
•UTING CHANNEL+AND- SLEEP
sound willbe silenced and "MUTING" will brieflyappear
on the screen. The sound can be tumed back on by
pressing this button again or one of the VOLUME + or
- buttons.
MUTING
channel automatically stops at the next channel set
into memory. Press and holdthe button down to
change channels more quickl_
For prOber operation, before selecting channel_, they
should be set into the memory. See pages 21 and 22
"Tomemorize channels'.
CHANNEL
CALL
_,date, _anne_ number, real time tape counter, tape speed and VCR
operation will be indicated.
Press CALL button again to disappear the call display.
Current thne
/FVCR operation
F
B:47AM_JEU _L 01_ Chennel No.
CALL 0_L_ Auto Repeat
Cassette
'_Tape counter and
tapespeed
NOTE: The Auto Repeat mark appears when Auto Repeat is selected.
VCR operation
_lt_ :Play
<1_ :Rewind
I_ :Fast-toward
:Eject
•:Recorading
|| : Recoradingpause
•:Stop
urnoff alter a preset amount of time, press the SLEEP button on the remote control.
The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...1O,0). Alter the sleep
time is programmed, the display will appear bdefly every ten minutes to remind you that the sleep timer is
oberating. To confirm the sleep timer setting, press the SLEEP button and the remaining time will be momen-
tedly displayed. To cancel the sleep timer, press the SLEEP button rebeated_yunti_the display toms to O,
SLEEP
TV/CAPTION/TEXT
the two closed caption modes (captions and full
screen text). C k_sedcapUoning will display text on th
screen for headng impaired viewers.
W/CAP
/TEXT
CHANNEL RETURN
you te go back to the last (
(or LINE F/R) selected by pressing the RETURN
button. Press this button again to rstum to the last
channel (or LINE F/R) you were watching.
RETURN
Totistenthr_ughtheheadph_ne_insertahe_`dphone_notsupplied)witha1_8_miniplugint_PH_NESjackonthefr_nt_ NOTE: eifthestationbeingviewedstepsbroadcastin! theTVwitlshutoffalter15mleutes.
The sound from the TV speaker is muted. • if using an indoorantenna or if TV reception is very poor, the Closed Caption DeCOdertext may not appear.
In this case, adjust the antenna for petter reception or use an outdoor antenna.
•When activating the Closed Captioned Decoder, there will be a short delay before the CLosedCaptioned
text appeam on the screen.
•Closad Captioned TV programs can be recorded and played back on aVCR with the Closed Captioned text
=ntect. The Closed Captioning text will disappear dudng Cue, Rewind and Pause modes or if the VCR
tracking le not adjumed properly.
4o •to ,oo.,y0lsplayedle o s.here lsa.ai e ..
IO/
TV OPERATION (CONTINUED)TO MEMORIZE CHANNELS
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned _evision programs. Ciceed
Captioning witl display toxt on the screen for hearing
impaired viewers Or it will translate and display text in
another isnguage.
CLOSED CAPTiONiNG WITH AVCR
Closed Captioned programs can be recOrded and pioyed
beck on aVCR with the Clased Captioned text intact.
The Closed Captioned text will disapbear during Cue
(Fast Forward Search), Review (Rewind Search) and
Pause Modes or if the VCR tracking is notadjusted
properly.
TO VIEW CLOSED CAPTIONS
Press the W/CAP/TEXT betto_ on the remote controlto
switch between normal TV and the two Closed Caption
Modes (C_otions and Full Screen Text).
Captions: This Closed Caption Mode will display text
on the screen in English or another language (depend-
ing o11the setting of the Closed Captions CH. Channel 1
or Channel 2).
Generally, Closed Captions in English are transmitted
on Captions Channel 1 and Closed Captions in other
languages are transmitted on Captions Channel 2.
Text: The Text Clased Caption Mode will usually fill the
screen with a programming schedule or other information.
After selecting a Closed Caption Mode, it will stay in
effect until it is changed, even if the channel is changed.
If the Captions signal is lost due to a comrnerciat or a
break in the signal, the Captions will reappear when the
signal is received again.
If the channels are changed, the Captions will be
delayed
approximately 10 seconds.
The Captions will appear in places on the screen where
they will least intedete with the picture, usually on the
bottom of the screen: News programs will usually show
three-line Closed Captions which scroll onto the screen.
Most other shows provide two or three lined Captions
placed near the character who is speaking so the viewer
can follow the dialogue.
Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words
that are sung usually appear encto_ed by musical notes.
For television programs broadcasting with Closed Cap-
tions, lookin your TV guide for the Closed Capgons
symbol (CC).
This TV/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the TV/VCR's memory. Inapdidon to ngrmal VHF and UHF channels, this I"V/VCR can receive up to 11_3Cable
TV channels. To use this TV/VCR with an antenna, set the W/CAW menu optionto the TV mode. When shipped
from the factory, this menu option is in the CATV mode.
W/CAW SELECTION
D Press the MENU button. _=_ ress the SET + or - button to select the CH "_
SET-UP mode, then press the ENTER button.
SET+
SET-
| TNERRECeel
W S_p
CH_IJJp
_IV4R0 _EF_J_T0,_F
__| Sy511_U_TJJp
• When selecting Closed Captions, the captioning will ha deisyed approximately 10 seconds.
•If no caption signei is received, no captions will appear, butthe television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with
Clased Captioning, especially with live programs. This is because dur_g live programs, captions are also
entered rive.These transmissions do notallow time for od_ng.
• "Whenthe on-screen indicator appears during volume adjustment operation, etc., Clcaed Caption text will not
be displayed.
•Some Cable systems and copy protectionsystems may interfere with the Closed Captioned signal.
•If using an indoor antenna or if TV reception is very poor, the Closed CaplJonDecoder may not appear or
may appear withstrange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
Press the SET + or -button
to select the TV/CATV mode.
SET+
Press the ENTER button
to select the TV or CA'rV
mode. The arrow indicates
the selected mode.
_MENU
20 21
TO MEMORIZE CHANNELS (CONTINUED)
AUTOMATIC MEMORY TUNING
PresstheMENUbutton.
_MENU
Press the SET + or - buttonto select the CH
SET-UP mode, then press the ENTER button.
TO ADD/DELETE CHANNELS
B Pressthe MENUbutton.
_MENU
press the SET + or - button
to select the CH SET-UP
mode, then press the ENTER
button.
SET+
MENU l
| Tp,,_ RECSF"
Press the SET + or - butto_
to select the ADD/DELETE
mode, then press the
ENTER button.
SET+
Press the SET + or - button to sektct the
AUTO CH MEMORY mode, then press the
ENTER button. The TV will begin memorizing
all the channels available in your area.
CH $E1_P
_I_Ei_1E
_J ress the MENLJbutton untilthe MENU
screen is cleared. --m Select the desired channelto be memorized or deleted
using SET + or - button, or
using the Direct Channel Selection
buttons (10 keys, 0-9), or CHANNEL
+ or - button.
SET+
SET-
Pressthe ENTER buttonto
s_ect the ADD or DELETE. It
youselect an unrnemo_ized
channel,the Channel indicationwill be
_ed.If you seioctthe ADD mode, the
Channe_indicationchanges f_omredto
greenand thecbennelwillbe memorized.
If youselect a memorized channel,the
Channel indica_ wig be green. If you
setectthe DELETE mode, the Cbennei
indication charges fromgreen to red
aed the channet will be beleted fromthe
rll_Smo/'J" _e r=ecl
Ill Press the MENU button until'the MENU screen is cleared.
_MENU
22 23
PICTURE CONTROL ADJUSTMENTS
Picture controls are factory preset but you can adjust them individuallyas fallows:
_MENU
Todisplaythepictureadjustrnentscreen, prass _===_ PresstheSET+or-buttontosalectthethe MENU button. PIC_TUREopUon,then press the ENTER button.
Press the SET + or - button to select the TV
SET-UP option, then press the ENTER button.
SET÷ SET+
SET-
BRIGHTNESS
• Press the ENTER button until "BRIGHTNESS"
appears on the screen, then press the SET + or -
button to adjust the brightness of the picture. When
the SET + button is pressed, the darker portions of
the picture become lighter.
SET+
CONTRAST
rassthe ENTER button until "CONTRAST _appears _
onthe screen, then press the SET + or - button toadjust
the contrast of the picture. Pictures look sharpest in
the daytime (bdght Jight)by increasing the contrast. At
night (dim light), the sharpest picture is obtained b
reducing the contrast.
_'T_
NOTE: TPe CONTRAST default
settingis set to rna_imum
•at the facts_y.
COLOR
)utton until =COLOR"
the screen, then press the SET + or - button to
adjust the co_orintensity of the pioture. The control
should be set when calors appear norrnal in intensity
and bdlliance.
SELF+
SET-
TINT
screen, then press the SET ÷ or - button to adjust the
tint of the picture. This determines how accurately the
colors are reproduced by the TV. Adjusting the tint for
natural fac_ tone is the best method of obtaining
accurate color reproduction of the entire picture.
SET+
O:,..-"
SET-
SHARPNESS
appears on the screen, then press the SET + or -
button to adjust the sharpness of the picture.
SET+
RESET PICTURES (CANCEL)
the CANCEL button while makin
adjustments will return all adjustments to the factory
preset levels.
CANCEl.
%
NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU
button three times. The settings can only be adjusted when they are displayed on the TV screen.
24 25
TO SET THE ON TIMER TO SET THE OFF TIMER
This festure allows you to have the TV automatically torn =ON" at predetermined time. If you program the .ON" timer
once the timer will turn "ON" the TV daily at the same time and to the same channel.
EXAMPLE: Turning on the TV to channel 12 at 7:00 AM, MONDAY-FRIDAY.
I
Oress the MENU button.
Press the SET + or - button
to select the TV SET-UP
opflon, tben press the ENTER button.
SET+
•
_1)_,_ Press the SET + or - button
to select the ON/OFF TIMER
option, then press the
ENTER button.
SET+
Press the SET + or - button_
to° :oaio., ofl:pO,e"s:'thti
ENTER button.
SET +
SET-
This feature allows you to have the TV turn "OFF" automatically at a predetermined time. If you program the OFF
TIMER once, the TV will be automatically tumed off at the same time daily.
EXAMPLE: Tumiog off the TV at 11:30 PM.
Hress the MENU button.
Press the SET + or - button to
select the TV SET-UP option,
then press the ENTER button.
SET 4-
_m_ ress the SET + or - button
to select the ON/OFF
TIMER option, then press
the ENTER button.
SET+
h
_ iTM _P |
SET_ ",I_RFE I_'R J
_Et, Ul
_j ress the SET + or - button"
to select the OFF TIMER
option, then press the
ENTER button.
SET+
SE T -
Press the SET + or - button
to set the desired hour, then
press the ENTER button.
8L=T+
SET- _
Set the desired minute,
channel and day of the week
as in step 4, then press the
ENTER button.
SET+
SET- _ _1__c_°1_ O_r_
Press the SET + or - button •
•to select the SET mode, then
_[e'l press the MENU button until
the MENU screen is cleared.
SET+
_.-j./
SeT- __-M-
NOTE: "The TV will automatically turn off approximately 1 hour later after the ON TIMER toms on the TV. If you
wish to continue watching the IV, press any button to cancel the one hour automatic shut off.This shut off
feature prevents the TV lrom playing continuously if no OFF TIMER is set.
•To cancel the ON TIMER function; To cancel ON timer, follow above steps 1-6, then press the ENTER
button to select the CANCEL position. Press the MENU button to return to the "rv.
•After setting the ON TIMER, "ff" of the OFF TIMER will flash on and off. If you wish to set the OFF TIMER,
press the ENTER button then fellow the steps 4-6 on peg• 27.
•If yoo want to correct the digits whPe setting, press the CANCEL button until the item you want to
6con,=, then press the SET + or -button to correct the desired setting.
FJ resstho0ET.or-0utton ressthe0ET+o -butt igI
to set the desired hour, then to set the desired minute, then
press the ENTER button, press the ENTER button.
SET+ SET+
Press the SET ÷ or -button_
to select the SET mode, the_
press the MENU button until
the MENU screen is cleared,
_, ENU
_gr _ER
SET- _m _x
27
NOTE: • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
•To cancel the OFF TIMER function:
To cancel OFF timer, follow above step 1-5, then press the SET + or - button to select the CANCEL position.
Press the MENU button to rstum to the TV.
•TO ¢onltrm the ON/OFF TIMER:
Press the PROGRAM button twice to indicate the programes on the sccreen.
LOADING AND UNLOADING A VIDEO CASSETTE PLAYBACK
Use only video cassette tapes marked _and S_.
LOADING
Push the center of the tape until it is automatically retractsd into the TVNCR.
AUTOMA'RC POWER ON AND PLAY
When loading a cassette tape withoutthe erase prevention tab intact, the TV/VCR will turn on automatically
and p_aybackwill start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
UNLOADING
_1 o unload a video cassette, press the STOP/ mr..iD!
EJECT button on the TVNCR twice. The first
press will stopthe tape in any mode. "me second
press wiJIeject the tape.
S_Op/EJECt"
AUTOMATIC EJECT
If the TVNCR automatically rewinds thetapeto the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically. (See NOTE on page 34.)
TO PREVENT ACCIDENTAL ERASURE
rafter recording, break off the erase prevention tab if
you do notwish to record over the tape.
Pull the cassette out.
NOTE: •Always eject the tape when not in use.
• The cassette tape can be ejected even if the
POWER is "OFF".
TO RECORD AGAIN
Cover tbe hole with vinyl tape.
Be careful the tape does notextend past the edges of
the video cassette housing.
TAPE SPEED AND MAXIMUM RECORDING TIME
_r VIDEO CASE3"FE TAPE
%160 T-120 T-90 T-60 T-30
SP (Standard Play) 2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
LEP (Extended Play) 8 hours 6 hours 4-1/2 hours 3 houm 1-1/2 hours
28
To playa prerecordedtape.
TO START PLAYBACK
TotornontheTVNCR, pressthe POWERbutton, Load a prerecorded tape. (When loading acassette tape without the erase prevention tat
playback will start automaticaity.)
Press the PLAY buifonth beg_ playt_d_
=I_ "wiUabpear _ _,_eso'cert.
TO STOP PLAYBACK
press the STOP button once. The ta
remain fully loaded and ready to play.
%
NOTE: This TV/VCR selects the tape speed SP or EP automatically.
29
PLAYBACK (CONTINUED)SPECIAL PLAYBACK
TO REWIND OR FORWARD THE TAPE RAPIDLY
rPressthe REW(Rewind)buttonintheStopmode. PresstheFF (FastFoP_/ard)buttonin theStopmode. •
* <4" will appear on the screen,
FORWARD/REVERSE PICTURE SEARCH
"_." will appear on the screen.
If you want to see the tape dudng REW (FF) mode, press and hold the REW (FF) button. The backward
_forward) visual search picture will be seen on the screen. Release to return to the REW (FF) mode.
igital AutoTracking system automatically adjusts the 1_king to obtain the best
pessil_e picture. If noise bars appear during playback, adjust the tracking manuatiyas follows:
•Pressthe TRACKING + or - buttonfo obtain the pest possiblepicture. "MANUAL TR." will appear for 4
second6 on the screen.
To resumeautomatic tracking, press the AUTO TRACKING buban. =AUTO TR." will appear for 4 seconds on
the screen.
--&UTO
30
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the FF or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When
pressed twice, the search picture will increase speed. Speed search time depends upon the speed used (SP or EP)
during recording. See chart below.
To rewind or fast forward a tape, press the STOP button, and then press the REW or FF button.
To visually search backward, press the REW button
once or twice in the PLAYBACK mode,
%
To visually search forward, press the FF buSon once
or twice in the PLAYBACK mode.
%
Press the PLAY button to resume normal viewing
speed.
Press the PLAY button to resume normal viewing
speed.
SPEED SEARCH TIMES \
\
_'_ PICTURESEARCHSPEED_
PRESS PRESS
ONCE TWICE
SP (Standardplay) 3X 5X
,0x
_P (ExtendedPlay) 9X •
TO WATCH STILL PICTURE j;
/
Press the PAUSE button in the PLAYBACK mode.
o
_ x
ACK)
You can play back the video casseSe tape recorded
in the S-VHS system. However the played back
picture does not have the high resolution of S-VHS
system.
Press the PLAY buSon or PAUSE buttonto resume
nom_al pdayback. NOTE: You can not record in S-VHS system,
NOTE: ° Best resultsduringspeed searchand still playbackcan be obtained with video cassettesrecorded in the "EP"mode.
• The audio output is muted during Speed Seamh and Still.
•Afew noise bars willappear on the 1_/screen duringSpeed Search and Still.
•Towevent damage to the tape, Stql aod Speed Search mode is automaticallychangedto tbe Playbackmode atter
5 mioutes. 31
SPECIAL PLAYBACK (CONTINUED)RECORDING A TV PROGRAM
TO WATCH A TAPE REPEATEDLY
UPresstheMENUbutton. Press the SET + or = button to select the
AUTO REPEAT option.
SET+
MENU
f l.......
SET- _L.CHSETUP
-ii A_0 REP_J_TO_ bOFF
(*/_IENTEP_IENU>
RECORDING AND VIEWING THE SAME TV PROGRAM
I;11 ""
To tom on the TV/VCR, press the POWER Load acassette tape with the erase prevention
button, tab intact.
i_ PresstheENTERbuttonto selectthe ON
position,
MENU
S1_4ERRECSET
I/vs_r_Jp
-| RE.AT _0N OFF
_J Press the MENU button. If you press the PLAY •
button, the tape will play over and over until the
repeat mode is canceled.
Press the SP/EP button to select the desired
tape speed (SP or EP). =SP" or "EF_will
appear on the screen for 4 seconds.
SP/EP
%
Set the TV/CA'P,/option to the appropdata
position. (See page 21 .]
NOTE: _T_cancelrepeatm_de_fo"_wab_ves_eps1and2_then_resstheENTERbutt_ntosetectthe_FFp_siti_n_NOTE: u_fp_werisswtiched_dutingrec_rding_theTVsetg_es_andtheVCRc_ntinuesto_ec_rd_Pressthe
pressthe MENUbuttonto returnto theTV. STOPbuttonto haltthe recordingandtom offtheVCR,
•The repeatfunctionis canceledautomaticallywhentheunitLsswitchedofforthetapei_ejected. •TheTV/VCRChannelcannotbechangedduringrecording.
32 CONTINUE NEXT PAGE 33
RECORDING A TV PROGRAM (CONTINUED)INSTANT TIMER RECORDING (ITR)
The Instant Timer Recording feature provides a elmF4e and convenient way to make a Umed recording.
m_ ress the Direct Channel Selection buttons to
select the channel to be recorded.
(Example: Channel 12)
Or press the CHANNEL + or - button to select
the channel to be recorded.
O 1 2
Ill Press the REC and the PLAY buttonsimultaneously.
The REC indicatorwill light.
%%
nOm
/\
EXAMPLE: Instant diner recording for 30 minutes.
B ress the POWER button
to tom on the TVNCR. Load a video cassette
with the erase prevention
tab intact.
Press the SP/EP button to"select the desired tape
speed (SP or EP). SP or EP
will appear on the screen for 4
seconds. (See page 28 for more
information on tope usage.)
SP/EP
%
[]
$
TO STOP RECORDING TEMPORARILY
unwantedmaterial.
"II" wiltappearontheScreenand theRECindicatorwilJblinkonand off
Pressthe PAUSEbuttonto continuetherecording.
/•
NOTE:
The PAUSE mode will be changed to STOP mode after live minutes to
_prevent damage to tha tape. #
NOTE: • AUTO REWIND FEATURE
34
TO STOP RECORDING
"_Pressthe STOP button to stop •
recording.
STOWEJECT
Set the W/CAW option
to the appropriate setting.
ITV -VHF/UHF channelsCATV -CABLE TV channels
Press the Direct Channel
Selection buttons to select
the channel to be recorded,
(Exampto: Channel 12) Or press and
release the CHANNEL + or - button.
(See page 17.)
_11 ress the REC and PLAY •
buttons simultaneously to
begin recording. Press the
both buttons again to stop recordin!
after 30 minutes. Each additional
press of the both buttons wifl
increase recording time as shown
below, up to a maximum of 5 hours
"ITR" will appear on the screen.
NOTE: • Press both the RECbuttonandthePLAYbuttontoincreasetheltmeneeded for recording,(Seethechatt
below.)
ThLs"rVNCR will automatically rewind the video cassette when the tape has ended (except during ITR and
• If the erase preventio_ tab is removed, the tape will eject when beth the REC button and PLAY button are __NORMALREC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 NORMAL REC
pressed for recording. • To cancel Instant "limer Recording, press the STOP button.
•The TVNCR charnel cannot be changed during recording. O_
°TIMER RECORDING
Timer record_g can be ixogrammed on-screen with the remote control. The butit-ln timer agow$ automtlc
unattended recording of up to 8 programs within 1 month.
EXAMPLE: Program a timer recording for 23th day, channel 007 (CATV), 7:00 - 9:30 PM (Tape speed : EP)
• Load a video cassette with the erase prevention tab intact. The TV/VCR wtil automatioally tom on.
•Set the "iV/CATV sek_tion to the appropriate position. (see page 21 .)
•See page 9 and 10, REMOTE CONTROL Operation.
U Press the MENU burton.
_ENU
Check the TIMER REC SET option is seleced
then press the ENTER button.
ENU
I CHS_T_P
|AUT0 RE.AT O_ =0_-
| 8YSlTM_T_
DSet the start time, end time, channel and tape
speed as instep 4.
SET+
_ _'/"_ _ P._SET
[,1 Press the ENTER burton to accept them.
Press the SET + or - button to select the
PROGRAM position, then press the ENTER
burton.
SET+
_J ress the SET + or - button to select the date
then press foe ENTER button.
See page 38 for the Daffy/Weekly Timer.
SET÷
TI4EA REC_=T
SET- _TE -_
NOTE: • If programming is pedormed without a tape in the "rv/VCR, or with a tape without an erase prevention
tab, the "rimer Recording isnot possible. If a tape without an erase prevention tab is in the TVNCR, the
tape will be ejected.
•To record from the extema_ equipment press the SET ÷ or - burton repeatedly until "L-F" (Line-Front) or
fJl_ "L-R" (Line-Rea_) appears when setting the channel _nstep 5.
OO
To set the timer for another program, press the
SET ÷or - button until the positionOf foe
Press the TIMER burton. The REC TIMER
indicatorwill light.The Timer isprogramed, when
second program blinks, then press the ENTER burton, the programmed time is reached, the recording
Repeat steps 4 to 6 to set the second program, is automatically started.
TIMER
RECTIMER
_0_
/\
To cancel timer recording, press the burton agsJn and
REC TIMER indicator willgo out.
NOTE: •The VCR sec6on cannot be used while the REC TIMER indicator is lit. If you want to use the VCR
operation, press the TIMER button to deactivate foe timer.
•After a power fa_ure or disconnection of the power piog, all programmed recordingserting and time
display will be lost ugo_ resumption of power. In this case, reset the clock (see poges 14-16.) and
reprograrn any timer recordings. 4robIIR!
If yOUwant to correct the digtis while setting, press the CANCEL burton untilthe item you want to _'_/"
correct, then press the SET + or - button to correct the desired setting.
OTHER FUNCTIONS FOR THE TIMER RECORING
TO SET DAILY/WEEKLY TIMER
P-
When seffing the Pate in the step 4 on page 36, press the SET - button repeatedly when the current pay IS
displayed.
The setting changes as follows;-
Example The currentday (Friday) --* SUN-SAT (Sunday to Saturday)
One monthliter minusone day MON-SAT (Monday to Saturday)
WKL-WED (Weekly Wednesday) MON-FRI (Monday to Fdday)
WKL-TUE (WeeklyTuenday) WKL-THU (WeeklyTbursday)
WKL-MON (Weekly Monday) WKL-FRI (Weekly Friday)
t
WKL-SUN (Weekly Sunday) <-- WKL-SAT (Weekly Saturday)
Alter setting, press the ENTER button.
TO CANCEL A PROGRAM
Press the SET + or - button to select the TIMER REC SET option in the MENU, then press the ENTER button. •
Press the SET + or -button to selid the unnecessary program, and press the CANCEL button to cancel the
program.
CANCEL
%
TO CONFIRM THE SEI-rlNGS
{PROGRAM CONFIRM) button once. The TV screen displays the timer program list.
Press the PROGRAM button again. The TV screen displays the ON/OFF timer setting,
PROGRAM
%(once) (twice) (3 times)
[
press the PROGRAM button 3 times. The screen returns to the norrnaJscreen, 1
NOTE: •The everyday/every week recording can be made continuously until the recording is canceled or the tape
reaches the end.
•During timer recording, the automatic rewinding mechanism does not function.
•Youcan correct or cancel the programmed set_ng in program confirm mode.
38
IF THE PROGRAM OVERLAPS ANOTHER
_NOTE: Donot overlap programsas portionsofthe conflictingprogramswillbelost. The firstrecordingtime has*
priorityoverthenextrecording_meas shownin the diagram.
8:00 9:00 10:00 11:00
-'F==t I I
Program2 _I_Deleted Psrts
Program3 _ _ NoeRecordedP0_tlonPa.'=
Recording Prog_2 Prog_3
CentroJSettings
39
I%1 USING THE REAL TIME TAPE COUNTER USING ZERO RETURN
The Co-Screen Real "rimeTape Counter shows the tape running t_ne in Hours, Minutes and Seconds.
You can easily determine how long the tape has been running or how much time is le0 on the tape.
TO VIEW THE COUNTER DISPLAY
B ress the CALL butthnto display the Real T_me
Tape Counter.
CALL
%RESET
COUNTER --_
The zero reture function provides a convenient method of rapidly returning to the starting point of recording or
playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button
and COUNTER ZERO RETURN button.
B Press the CALL button to display the counter.
CALL
%
___ Before playback or recording, press the
COUNTER RESET button to set the counter
to "00:00:00".
RESET
COUNTER --_
Begin Playback or Recording to start the tape,
the counter will display the elapsed time.
%or%÷%
1B
_J hen you wish to make the countar disap*
pear, press the CALL burton once again.
CALL
%
NOTE: • If you rewind the tape from "00:00:00", a minus sign (=-") will be displayed in front of the time.
•When you load a tape, the counter will reset to "00:00:00 _.
•The counter does notfunction on nonrecorded (blank) sections of the tape. When you rewind,
fast forward or play tapes through blank sections, the counter stops.
40
Begin playback or recordiog.
Press the STOP button.
%
_,g_ll Press the ZERO RETURN •button. The tape will rewind
and automatically stop at
the "00:00:00" position.
ZERO
COUNTER
_u
41
DUPLICATING A VIDEO TAPE RECEPTION DISTURBANCES
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Mako all conneoflons before turning on the power.
_i_ Insertablankcassettewiththeerasepreven- _PresstheINPUTbuttontwiceselectAUDIO/
tion tab intact into the TVNCR. VIDEO input position, The "LINE P' will appear
Insert a previously recorded cassette into the on the screen.
playback VCR or Camcorder.
CONNECTION TO ANOTHER VCR
RECORDING _/NCR
I_PLAYBACKAuDtOouTVCR _
VIDEO
OUT| VIOE , I_ AUOIO IN
Ii
AUDIO/VIDEO CORD (NOT SUPPUED)
INPUT
NOTE: You can also use the rear AUDIONIDEO IN
Jacks. Select "UNE R"by pressing the INPUT
button. #
CONNECTION TO CAMCORDER
ForduplicaUnga previouslyrecordedtape from8camcorder.
follow the carncordermanufacturer's instructions. Atypical
camcorder dubbing hookup is shownbak)w.
RECORDING W/VCR
pLAyBACK
CAMCOROER
_To AV JaCl_
AUDI_3/tD EO CORD
Press the REC buttonand th
PLAY button simultaneousl
on the remote control or the
REC button on the TV/VCR, then
the PAUSE button.
_r_ Press the PLAY Buttonon tba
playback VCR.
%
_OE_AU_OIN
_1 Press the PAUSE button _on the TVNCR to begin
the duplicating process.
NOTE: •It is recommended that the tape speed be set to the SP mode on the TVNCR for best results.
• Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copydght owners and be contrary to copyright laws.
Most types of television Interference can he remedied by adjusfing the height end poaltion of the VHF/UHF
antenna. Outdoor antennas are recommended for best resulth. The most common types of talevlalon interfer-
ence are shown helow. If one of these symptoms appear when the WNCR is connectad to a Cabta TV sy_em,
the disturbance may he caused by the local Cable W company broadcast.
IGNITION
BEackspots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by intedemnce from automobile ignition systems,
neon lamps or AC powered toolsand appliances such as drillsor hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hillsor other large
objects. Changing the direction or positionof the antenr_ may improve the
r(_cepfion.
SNOW
If the T'V/VCR is located far from the TV station, in a fringe reception
area where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks inthe picture. Some cases may cause aloss of
contrest in the picture. Changing the direction and positionof the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TVNCR from the AC power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as ether furniture. Use
caution when cleaning or wiping the plastic parts.
42 43
TROUBLESHOOTING GUIDE
Check the following chart before requesting service.
SYMPTOMS ICAUSE J POSSIBLE SOLUTIONS JPAG_
POWER
Connect the AC power cord to the 7
No power. The AC power cord is not connectsd. AC ouUet.
Although the power is on, Cassette is not insetted. Insert a video cassette. 28
the TV/VCR does not
operate. TIMER button is depressed. Press the TIMER button. 37
11/BROADCAST RECEPTION
TV station experiencing problems. Try another channel. 17
Ploture control is not adjusted. Check picture contral adjustments. 24,2_
Poo_ror no picture, Possible local interference. Check for source of reception 43
disturbance.
Antenna (CATV) connector is not Check CATV connection or
connected or possiblelocal VHF/UHF antenna, reposition 11,12
interference, or rotate antenna.
TV station expadencing pvobalms. Try another channel, t7
Picture control is notadjusted. Check picture controladjustments. :24, 25
Poor or no color. Possible local interference, disturbance.Checkfor source of reception 43
Antenna (CA.IV) connector is not Check CA.IV connection or VHF/
connected or possibts local UHF antenna, repostiion or rotata 11, 12
interference, antenna.
TV station expahencing problems. Try another channel. 17
Antenna (CATV) connector is not Check CAW connection or VHF/
Picture wobbJesor drifts, connected or possibletscal UHF antenna, repocitionor rotate 11, 12
interference, antenna.
Cabis "iV channel is scrambled. Try another channel. 17
CA.IV connector is notconnected. Check aJlCA.IV connections. 12
.IV/CAW Mode menu option is set to Set the .IV/CA.IV Menu option 21
NO CA.IV reception, the TV mode, to the CATV mode.
Cable TV service interrupted. Contect your Cable "rv company. 12
.IV/CAW Mode menu option is not Make sure .IV/CA.IV menu option 21
NO reception above set to the appropriate mode. is in the appFopdats mode.
channel 13. UHF entenna is notconnected. Check UHF antenna. 11
"iv station experiencing probisms, Try another channel. 17
Antenna (CA.IV) connector is not Check CATV connection or VHF/
connected or edssibis local UHF antenna, repositionor rotate 11, 12
Poor or no sound, interference, antenna.
Possible k_al interference. Check for source of reception
disturbance. 43
MUTING button is depressed. Check that MUTING button has 18
•not been pressed. •
44
•SYMPTOMS
TV shuts off.
Closed caption is not
activated.
RECORDING
"rv recording does not
work.
Timer recording does not
work.
PLAYBACK
Noise bars appear on the
=screen.
REMOTE CONTROL
Remote control does
not oparats.
CAUSE
TV station stopped broadcasting.
Sleep timer is set.
TV station experiencing problems or
program tuned is notclosed
captions.
PAGE
17
19
17, 1.¢
TV signal is weak. 11, 1;
The TV/CAP/TEXT button is not
dspmssed. 1g, 2C
POSSISLE SOLUTIONS
Tune new channel.
Set Sleep "nmer to "0".
Try another channel.
Check CA.IV connection of VHF/
UHF antenna, repoaltion or rotate
antenna.
Press the W/CAP/TEXT button to
turn on the closed caption.
Place a piece of vinyl tape over 28
the hole,
Reset the present time. 14-16
Reset the sfart/end time. 36, 37
Press the TIMER button {the REC
TIMER indiCatOr is lit.). 37
The video cassette's erase
_revention tab is broken off.
The time is notset correctly.
The recording stsrt/end time is not
set correctl)_
The TIMER button has not been
pressed (the REC TIMER indicator is
not lit-).
Tape is o_dor worn, Reptsce the tape. --
Tracking adjustment is beyond range Adjust tracking manually usthg
the TRACKING + and - buttons 30
of automatic tracking circuit, on the remote control
Video heads are dirt_ Clean the video heads. 46
Aim the remote control at the 10
remote sensor.
Operate within 15 feet or reduce
!the light of the room. 10
Clear the path of the beam. 10
Reptsce the batteries, 10
insert correctly, 10
The remote control is not aimed at
the sen_',of.
Distance is too far or too much light
in the room.
There is an obstacts in the path of
the beam.
The battedes are weak.
The batteries am not inserted
coneofly.
45
VIDEO HEAD CLEANING SPECIFICATIONS
VIDEO HEAD CLOGGING
The video heads are the means by which the TVNCR reads the picture from the tape during playback. In the
unlikely event that the heads become dirty enough to be clogged, no picture will be played beck. This can easily be
determined if, during playback of aknown good tape, there is good sound, but no picture (picture is extremely
snowy). If this is the case, have the TV/VCR checked by qualified seP..tcepersonnel.
TELEVISION
PictureTube:
Tuner Type:
ReceivingChannels:
Good Picture Snowy Picture
VIDEO HEAD CLEANING
AUTO HEAD CLEANING system cleans the video heads automatically when a cassette is inse_ed or ejected to
prevent dirt from accumulating on the heads. However, manual head cis_niog is needed if the picture on playttack is
still unclear althOughthe picture on program is normal. This failure signifies that the head is getting dirty and occurs
when playing poor quality or damaged tapes. If the heads require cleaning, use a high qualify head cleaning system
or have them cleaned professionally.
NOTE: •DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR
COVER.
•Video heads may eventually wear outand should be replaced when they fail to produce clear pictures.
•To help prevent video head clogging, use only good quality VHS tapes. Discard worn outtapes.
Antenna Input:
Speaker:
Audio Output Power:
VCR
Video System:
Video Signal:
Cassette Tape:
Audio Track:
Tape Speed:
F.FWD/REW 13me:
Speed Search:
GENERAL
PowerSource:
PowerConsumption:
Dimensions:
Weight:
Inputs/Outputs:
StorageTemperature:
OperatingTemperature:
13" (measured diagonally)
Quartz PLL Frequency Synthesized
VHF 2-13
UHF 14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
VHF/UHF In 75 ohms coaxial
1.5" x 2,5", 8 ohms x 1
1.5W
VHS, 4 Rotary Heads Helical Scanning System.
NTSC Color
VHS
1Track
SP: 33,35 mm/sec
EP: 11.12 mm/cec
F,FWD: Approx. 2minutesand 15 seconds
REW: Approx. 1 minuteand 48 seconds
(T-120 Cassette)
SP 3 & 5 x Normal Speed
EP 9 & 15 x Normal Speed
AC 120V 60Hz
70 Watts
W 14 1/4"x D 14 1/2"xH15 1/16"
26 Ibs
Video: In (RCA) 1Vp-p 75 ohm
Out (RCA) 1Vp-p 75 ohm
Audio: In (RCA) 300 mV/50K ohm
Out (RCA) 300 mV/1K ohm
-20°C to 60°C (-4°F to 140°F)
5°C to 40°C (41°F to 104°F)
Accessories:
Remote Control
Batteries (AA) X 2
Specificationsare subject to change without notice.
46 47
LOCATION OF CONTROLS
FRONT
f\
234 5 6
\U /l L / /
8910 11 12 13 14 15 16 17
REAR
18 19 20 21
DESCRIPTION OF CONTROLS
FRONT:
1. Cassette Loading Slot -To insertor removea
video tape.
2. REC /ITR Button - Press once to start normal
recording. Additional presses activate Instant "13mer
Recording.
3. REW (Rewind) Button -'In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
4. PLAY Button - Press to play a prerecorded tape.
5. FF (Fast Forward) Button -In the Stop mode, this
buttonrapidly winds the tape forward. In the Play
mode, this buttonactivatesforward search.
6. STOP/EJECT Button -Press once to stopthe tape
in any mode. Pressagain to eject the tape.
7. Headphone Jack - Plug monauralheadphones or
an earphone withan 1/8" miniplug intothisjack for
privatelistening.
8. AUDIO/VIDEO IN Jacks -Audio and video signal
cables from an extemal source can be connected
here.
9. INPUT Selector Button - Switchesthe programfor
viewingbetween the VCR and an external input
SOUrCe.
10. SP/EP Selector Button -Sets the tape speed for
recording.
11. CHANNEL +/- Buttons -Pressto select a channel
for viewingor recording.
12. VOLUME +/- Buttons - Pressto raiseor lowerthe
volumeof the sound.
13. REC Indicator- Lightswhenthe'I'VNCR is recording.
14. REC TIMER Indicator -This lightswhen the TIMER
buttonis pressed.
15. ON TIMER Indicator -This indicatorlightsup when
the poweredup. It alsolightsupwhen ON TIMER
program is turnedON while power is OFF.
16. POWER Button - Pressto turn theTV/VCR onor off.
17. Remote Sensor - Signalsfromthe RemoteControl
are received here.
REAR:
18. VHF/UHF Antenna Jack -Connectthe 75 ohm
coaxial cablefromthe antenna orCable TV service
to thisjack.
19, VIDEO/AUDIO IN Jacks -Audio and video signal
cables from an external sourcecan be connected
here.
20. VIDEO/AUDIO OUT Jacks - Used to output audio
and video signals to a "I-V,amplifier or VCR.
21. AC Power Cord - Connect to a 120V, 60Hz outlet.
26
REMOTE CONTROL
2
3
?
8
9
15
16
20
21
DESCRIPTION OF CONTROLS
1. TIMER Button - Used to set the TVNCR to start
recordingat a preset time.
2. INPUT Selector Button - Switches the program for
viewingbetweenthe VCR and externalinputsoumes.
3. CALL Button -Displaysthe presenttime/day of the
week, channel,counter,speed selection(and VCR
mode if VCR is playing)onthe "IV screen.
4. TV/CAPFFEXT Button - Switchesbetween Caption,
Textand TV modesfor Closed-Captionedprograms.
5. REW (Rewind) Button - Inthe Stop mode, this
buttonrapidlywinds the tape backwards.Inthe Play
mode, this button activates reverse seamh.
6. REC Button -Press once togetherwiththe PLAY
button to start normalrecording.Additionalpresses
activate InstantTimer Recording.
7. MUTING Button -Press to turn off the sound. Press
again to turn the soundback on.
8, CANCEL Button -Press to cancelexistingsetupsor
to restoredefault values.
9. ENTER Button -Press to enter selectedsetup.
10. POWER Button -Press to turnthe TV/VCR on.
Press again to turnthe TV/VCR off.
11. COUNTER RESET Button - Used to resetthe
counterto 00:00:00.
12. RETURN Button - Switchesbetween the present
channeland the last channelselected.
13. FF (Fast Forward) Button - Inthe Stopmode, this
button rapidlywindsthe tape forward. In the Play
mode, this buttonactivatesforward seamh.
14. PAUSE Button - During recording,thisbutton
temporarilystopsthe tape. Duringplayback,it stops
the tape and displaysa stillimage on the "IV screen.
15. SLEEP Button - Sets the TV to turn off automatically
alter up to 120 minutes.
16, MENU Button - Press to display the On-Screen menu
function.
17. SP/EP Selector Button - Sets the tape speed for
recording.
18. Direct Channel Selection Buttons (0-9) - Allows
directaccessto any channel.
19. Digital AUTO TRACKING Buttons - Allowsautomatic
or manualadjustmentof trackingto minimizepicture
noiseduringplayback.
20. STOP Button - Press once to stopthe tape.
21. CHANNEL + /- Buttons - Pressthe + buttonto
changeto ahighernumberedchannelset intomemory.
Press the - buttonto change to a lower numbered
channelset into memory.
22. PROGRAM Button - Pressto confirmthe programmed
timerrecordingand ON/OFF timer.
23.ZERO RETURN Button - Use to stopthe tape when
the counterreaches00:00:00.
24. PLAY Button - Pressto playa prerecordedtape.
25.VOLUME + I - Buttons - Press the + buttonto
increase,orthe -buttonto decreasethe volume level.
26. SET + /- Buttons - Used to selectthe optioninthe
menu or settimer recording,ON/OFF timer, channel
set, picture adjustment, auto repeat, clock and
language.
27
JVC °
JVC COMPANY OF AMERICA
DivisionofU.S.JVC CORP.
1700 ValleyRoad
Wayne, New Jersey07470
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada M1X 1A7
5500101A[]
99/03 O
PRINTED IN THAILAND
28
