Jvc Ux G70 Users Manual

UX-G70 to the manual d85dc432-8978-460c-b0ba-3bbb7eb41acd

2015-01-23

: Jvc Jvc-Ux-G70-Users-Manual-325753 jvc-ux-g70-users-manual-325753 jvc pdf

Open the PDF directly: View PDF .
Page Count: 48

Download
Open PDF In Browser	View PDF

Cover[U].fm Page 1 Tuesday, March 28, 2006 4:08 PM

MICRO COMPONENT SYSTEM

UX-G70

—Consists of CA-UXG70 and SP-UXG70

SUPER VIDEO

INSTRUCTIONS

GVT0181-008A
[US,UN,UG,UX]

Safty[U].fm Page 1 Wednesday, March 22, 2006 11:32 AM

Warnings, Cautions and Others
CAUTION—
(Standby/on) button!
Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus,
ensure that the plug is easily accessible. The
(Standby/on) button in any position does not disconnect the mains line.
• When the System is on standby, the STANDBY lamp lights red.
• When the System is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service
personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted candles, on the apparatus.
• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these
batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.

Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm
or more.
Front view

Side view

15 cm
15 cm

1 cm

15 cm

15 cm
15 cm

10 cm

SP-UXG70

[European Union only]

G-1

CA-UXG70

SP-UXG70

CA-UXG70

UX-G70[U].book Page 1 Monday, April 17, 2006 5:18 PM

Introduction
Precautions

Contents

Installation

Connections ..............................................................3
Display Indicators....................................................6
Daily Operations—Playback ..................................7
Daily Operations—Sound & Other Adjustments .....13

• Install the System in a location with adequate ventilation to
prevent internal heat buildup in the System.
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
• Install in a place which is level, dry and neither too hot nor
too cold—between 5°C and 35°C.
• Leave sufficient distance between the System and the TV.
• Keep the speakers away from the TV to avoid interference
with the TV.

Power sources
• When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
DO NOT handle the AC power cord with wet
hands.

Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
• After starting to heat the room
• In a damp room
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.

Internal heat
• Make sure there is good ventilation around the unit. Poor
ventilation could overheat and damage the unit.
DO NOT block the ventilation openings or
holes. If they are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.

Others
• Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
DO NOT disassemble the System since there
are no user serviceable parts inside.
• If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
If anything goes wrong, unplug the AC power cord and
consult your dealer.

Adjusting the Volume ....................................................... 13
Adjusting the Sound.......................................................... 13
Creating 3-dimentional Sound Field—3D Phonic ............ 14
Presetting Automatic DVD Video Sound Increase Level ......14
Adjusting the Audio Input Level ...................................... 14
Adjusting the Audio Output Level.................................... 14
Changing the Display Brightness...................................... 15
Changing the Scanning Mode ........................................... 15
Changing the Picture Tone................................................ 15
Setting the Clock............................................................... 16
Turning Off the Power Automatically .............................. 16

Unique DVD/VCD Operations .............................17
Selecting the Audio Track................................................. 17
Selecting the Subtitle Language........................................ 18
Selecting the View Angle ................................................. 18
Selecting the Browsable Still Pictures .............................. 18
Playing Back Bonus Group............................................... 18
Making Dialogues Clear—Clear Voice ............................ 19
Special Effect Playback .................................................... 19

Advanced Disc Operations....................................20
Programming the Playing Order—Program Play ............. 20
Playing at Random—Random Play .................................. 21
Playing Repeatedly ........................................................... 22
Prohibiting Disc Ejection—Child Lock............................ 22
On-screen Disc Operations ............................................... 23
Operations on the Control Screen ..................................... 27

Advanced Tape Operations ..................................29
Recording on a Tape ......................................................... 29
Synchronized Disc Recording........................................... 30

Enjoying Karaoke..................................................31
Singing Along (Karaoke) .................................................. 31
Microphone Mixing .......................................................... 32
Reserving Karaoke Songs—Karaoke Program Play......... 33

Timer Operations...................................................34
Setup Menu Operations ........................................36
Additional Information .........................................38
Learning More about This System.................................... 38
Troubleshooting ................................................................ 41
Operating JVC’s TVs Using the Remote Control............. 43
Specifications .................................................................... 44

Parts Index ............................................................45

UX-G70[U].book Page 2 Monday, April 17, 2006 5:18 PM

Playable Disc Types

COMPACT

DIGITAL VIDEO

SUPER VIDEO

DIGITAL AUDIO

• CD-R/-RW: Recorded in the Audio CD, Video CD and
SVCD formats. MP3, WMA, JPEG, MPEG-1,
MPEG-2, ASF and DivX files written in accordance
with the “ISO 9660” format can also be played.
• DVD-R/-RW, +R/+RW: Recorded in the DVD Video
format. MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF
and DivX files written in the UDF bridge format can
also be played.
• DVD-R/-RW/-ROM: Recorded in the DVD Video
Recording (VR) format.
In addition to the above discs, this System can playback
audio data recorded on CD-Extra.
• The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,
CD-G (CD-Graphics) and DVD/CD Text.
Playing back these discs will generate noise and damage
the speakers.

When playing a multi-channel encoded DVDs, the System
properly converts these multi-channel signals into 2
channels, and emits the downmixed sound from the
speakers.
• To enjoy the powerful sound of these multi-channel
encoded DVDs, connect a proper decoder or an amplifier
with a proper built-in decoder to the DVD OPTICAL
DIGITAL OUT terminal on the rear.
IMPORTANT: Before playing a disc, make sure of
the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
• For disc playback, you can change the initial setting to
your preference. See “Setup Menu Operations” on
page 36.
If “
” appears on the TV screen when you press a
button, the disc cannot perform the operation you have
tried to do.

How to Read This Manual
• Button and control operations are explained in the table
below.
• Some related tips and notes are explained later in the
sections “Learning More about This System” and
“Troubleshooting,” but not in the same section
explaining the operations ( INFO indicates that the
content has some information).
Indicates that you press the button briefly.

• In this manual, “file” and “track” are interchangeably used
for MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF and
DivX operations.

Indicates that you press the button briefly and
repeatedly until an option you want is
selected.

• It is possible to playback finalized +R/+RW (DVD format
only) discs. “DVD” lights on the front display panel when
a +R/+RW disc is loaded.
About color system
This System accommodates the NTSC and PAL system and
can playback discs recorded in either the NTSC or the PAL
system.
• To change the color system, see page 15.
Note on Region Code
DVD players and DVDs have their own Region Code
numbers. This System can playback only DVDs with an
appropriate Region Code number.
For details, see “Specifications” on page 44.

Indicates that you press one of the buttons.

2 sec.

Indicates that you turn the control toward the
specified direction(s).
Remote
ONLY

EX.: For South East Asia
Main Unit
ONLY

Audio formats
The System can playback the following digital audio
formats.
• LPCM (Linear PCM),
DIGITAL (Dolby Digital),
DTS (Digital Theater Systems), MLP (Meridian Lossless
Packing)

Indicates that you press and hold the button
for a specified period.

Indicates that this operation is only possible
using the remote control.
Indicates that this operation is only possible
using the main unit.

“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan and other
countries.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore, the
use of the Non-DVD side of a DualDisc in this product is not
recommended.

UX-G70[U].book Page 3 Monday, April 17, 2006 5:18 PM

Connections
Supplied accessories

Do not connect the AC power cord until all other
connections have been made.

• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may
interfere with your viewing when playing back a copyprotected disc. Connecting VIDEO OUT to an integrated
TV/VCR system may also interfere with your viewing.

Check to be sure that you have all the following items.
• FM antenna (x1)
• AM loop antenna (x1)
• Composite video cord (x1)
• Core filter* (x1)
• Remote control (x1)
• Batteries (x2)
• AC plug adapter (x1) (except for the Middle East)
If any item is missing, consult your dealer immediately.

Rear panel

~ From the powered subwoofer
See page 4.

Ÿ From AM/FM antenna
See page 4.

! From the input of TV/monitor
See page 4.

⁄ From the digital input of digital audio component
See page 4.

Voltage selector: See page 5.

@ From the speakers
See page 5.

¤ To a wall outlet
Plug in the AC power cord only after all connections
are complete.
• If the wall outlet does not match the AC plug, use the
supplied AC plug adapter (except for the Middle East).

Front panel
Pull down the cover until you hear a clicking sound.
From the PC: See page 12.
From the portable audio device: See page 5.
From the headphones: See page 7.
*Attaching the core filter to the USB cable to reduce interference
At the front panel

Stopper

Wind firmly the USB cable twice.
• Keep close between the plug connected to the
System and the core filter.
• Do not damage the USB cable by applying
excessive force when winding.

Close the core
filter until you
hear a clicking
sound.

UX-G70[U].book Page 4 Monday, April 17, 2006 5:18 PM

~ Powered subwoofer
From the powered
subwoofer
(not supplied)

SUB WOOFER
OUT

• Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).

! TV/monitor

The subwoofer connected can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals in DVD multi-channel discs.
• Before plugging the unit to the main supply, make sure that
the powered subwoofer is turned off.

Connect only component cord at one time.

Red

Ÿ AM/FM antenna

Blue

To assemble the AM loop antenna

Green

Component video cord
(not supplied)

• To select progressive scanning mode (see page 15), use
COMPONENT jacks.

To connect AM/FM antenna
AM loop antenna
(supplied)

S-video cord (not supplied)

Composite video cord (supplied)

• After connecting a TV, select the proper video signal mode
according to the connection method. See “Changing the
Scanning Mode” on page 15.
FM antenna (supplied)

Extend it so that you can obtain the best
reception.
For better AM/FM reception
AM loop antenna (supplied)

⁄ Digital audio component
Protective cap

Keep it connected.

Vinyl-covered wire
(not supplied)

Extend it horizontally.

FM outdoor antenna
(not supplied)

• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu
correctly according to the connected digital audio
equipment (see page 37). If the setting is incorrect, loud
noise may be generated causing damage to the speakers.
• Digital audio signals are output from this System only when
“DVD/CD” is selected as the source.

UX-G70[U].book Page 5 Monday, April 17, 2006 5:18 PM

@ Speakers
• When connecting the speaker cords, match the polarity of
the speaker terminals: red color to (+) and black color to (–).

Press and hold

• By using QP Link (Quick Portable Link), you can easily
start playing back a portable audio device on this unit when
connecting it to the LINE IN jack. See page 12 for details.
• Connect an audio component to the LINE OUT jack if the
component is not equipped with a digital input terminal.
• If an external device is not equipped with a stereo mini plug
audio output, use a plug adaptor to convert the stereo mini
plug to the corresponding plug of the audio output.

Before plugging in the System
Set the correct voltage for your area with the voltage selector
on the rear.

Insert

Release

110V
220V

VOLTAGE
SELECTOR

127V

Red

From right
speaker

CAUTION:

Black

230V-240V

From left
speaker

Use a screwdriver to set the
voltage selector to the same
voltage as where you are
plugging in the unit. (See also
the back cover page.)

Preparing the remote control

• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom
of the speakers.
R6(SUM-3)/AA(15F)

When connecting a portable audio device (LINE)
Portable audio device
(Digital Audio Player, etc.)
At the front panel

To the audio output

Stereo mini plug
(not supplied)

• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
DO NOT recharge, short, disassemble, heat
the battery or dispose of it in a fire.
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.

To the audio input
Portable audio device with
the audio input
(Digital Audio Player, etc.)

UX-G70[U].book Page 6 Monday, April 17, 2006 5:18 PM

Display Indicators
The indications on the display tell you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.

2 3 4 5 67 8 9p q

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

1 Disc tray indicators
• 1–5: Disc tray number indicators.
– Flashing while the disc tray is open.
•
(disc tray indicator):
– Lights when the disc is detected.
– Flashing while playing back a disc or the disc tray is
open.
– Disappears when there is no disc in the tray.
• : Lights to indicate the current selected disc.
2 QP Link (Quick Portable Link) indicator
• Lights when QP Link is activated.
3 Audio file format indicators
• MP3: lights when an MP3 track is detected.
• WMA: lights when a WMA track is detected.
4 PG/PL indicators
• PG: lights when a DVD-VR formatted disc is called up.
• PL: lights when a playlist recorded on a DVD-VR
formatted disc is called up.
5 FM reception indicators
• MONO: lights while receiving an FM stereo station in
monaural.
• ST (stereo): lights while an FM stereo station with
sufficient signal strength is tuned in.
6 USB indicator
• Lights when “USB” is selected as the source.
7 AHB PRO indicator
• Lights when Active Hyper Bass Pro is activated.
8 S.TURBO (Sound Turbo) indicator
• Lights when Sound Turbo II is activated.
9 A.STBY (Auto Standby) indicator
• Lights when Auto Standby is activated.
• Flashes for about 3 minutes before Auto Standby turns
the System off.
p SLEEP indicator
• Lights when the Sleep Timer is activated.
q REC indicator
• Lights while recording.

t yu i

;

w Playback mode indicators
• PRGM: lights when Program Play is activated.
• RANDOM: lights when Random Play is activated.
•
(repeat)1 DISC A-B ALL GROUP:
1 : lights when One Track/Chapter/Step Repeat is
–
activated.
–
GROUP : lights when Group Repeat is activated.
1 DISC : lights when One Disc Repeat is activated.
–
DISC ALL : lights when All Disc Repeat is activated.
–
A–B : lights when A-B Repeat is activated.
–
e Main display
• While listening to radio: Band (or preset number) and
station frequency appear.
• While selecting “LINE”: “LINE” appears.
• While selecting “TAPE”: “TAPE” appears.
• While selecting “USB”: “USB AUDIO” appears.
• While playing a disc: current status appears.
r 3D PHONIC indicator
• Lights when 3D Phonic is activated.
t
(Clear Voice) indicator
• Lights when Clear Voice is activated.
y PRGR. (Progressive) indicator
• Lights when the progressive scanning mode is selected.
u B.S.P. (Browsable Still Picture) indicator
• Lights when Browsable Still Pictures are detected while
playing a DVD Audio disc.
i BONUS indicator
• Lights when a DVD Audio disc with a bonus group is
detected.
o Daily Timer indicators
• 1/2/3: lights when a Daily Timer (1, 2, or 3) is on standby;
flashes while working or being set.
•
: lights when Daily Timer is on standby or is being set.
• REC: lights when the Recording Timer stands by; flashes
while working or being set.
; 2 3 (tape direction) indicators
– Lights to indicate the current tape running direction.
– Flashes slowly during playback and recording.
– Flashes quickly while rewinding or fast-forwarding a
tape.

UX-G70[U].book Page 7 Monday, April 17, 2006 5:18 PM

Daily Operations—Playback
Remote control

Disc tray
selecting
buttons

1
Number
buttons

ENTER/SET
TOP MENU/PG
RETURN

MENU/PL
, , ,

2
8
7

GROUP/TITLE SKIP
4,¢
FM/PLAY MODE

1,¡
QP LINK
SHIFT

In this manual, operations using the remote control are
mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.

1 Turn on the power.
The STANDBY lamp on the main unit goes off.
• Without pressing
AUDIO, the System turns on
by pressing one of the source buttons.
• The System turns on and changes the source to LINE
by starting playback on an external device when
QP Link is activated. (See page 12 for details.)

2 Select the source.
Playback automatically starts if the selected source is
ready.
• If you press LINE, start playback on the external
component.

3 Adjust the volume.
4 Operate the target source as explained
later.

To turn off (standby) the unit
The STANDBY lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.

DVD/CD

FM/AM

USB

LINE

TAPE

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

TV VOLUME
VOLUME

You can reduce power consumption by pressing DISPLAY
to turn the display off while on standby.
• When the display is turned off, QP Link does not work.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.

DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.

UX-G70[U].book Page 8 Monday, April 17, 2006 5:18 PM

Listening to the Radio

To select the band (FM or AM)

INFO

Main unit:

Remote control:

To set the AM tuner interval spacing

Main Unit
ONLY

Before operating the tuner, it is required to select the
appropriate AM space interval used for your area.
• This is possible only while the System is on standby.

1 Select the AM band.

To tune in to a station
TUNER FM

While FM or AM is selected...
Remote control:

TUNER AM

Main unit:

2 sec.

GROUP/TITLE SKIP

DOWN

2 Turn off the power.

3 Select the appropriate AM space interval for your
area.

Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.

DOWN

AM 9KHZ

If the FM station has poor reception

Remote
ONLY

PAGE
FM/PLAY MODE

(9 kHz interval)
(while holding...)

AM 10KHZ

The MONO indicator lights on the display. Reception will
improve though stereo effect is lost—Monaural reception.
To restore the stereo effect, press the button again (the
MONO indicator disappears).

(10 kHz interval)
(while holding...)

To preset the stations

Remote
ONLY

You can preset 30 FM and 15 AM stations.

1 Tune in to a station you want to preset.
2

• You can also store the monaural reception mode for FM
preset stations if selected.
Activate the preset number entry mode.
ENTER/SET

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

• Finish the following process while the indication on the
display is flashing.

UX-G70[U].book Page 9 Monday, April 17, 2006 5:18 PM

3 Select a preset number for the station you store.
DISC 1

1
DISC 4

4
SCAN MODE

DISC 2

DISC 3

DISC 5 A.STANDBY

VFP

SLEEP

LINE OUT LEVEL ANGLE

9
ZOOM

Examples:
To select preset number 5, press
5.
To select preset number 10, press
10.
To select preset number 15, press
10, 1, then 5.
To select preset number 30, press
10, 3, then 0.

Playing Back a Tape
To insert a tape
You can playback type I tapes.
Push

Insert

• You can also use the ¡ or 1 button.
With the tape side facing outside

4 Store the station.
ENTER/SET

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

To tune in to a preset station

To start:

To stop:

Remote
ONLY

1 Select the band (FM or AM).
TUNER FM

When “TAPE” is not selected as the
current source, press twice.
To rewind/fast-forward the tape:
Remote control:
GROUP/TITLE SKIP

TUNER AM

Fast-forward the tape.

2 Select the preset number for the station you stored.
DISC 1

1
DISC 4

4
SCAN MODE

DISC 2

DISC 3

DISC 5 A.STANDBY

VFP

SLEEP

LINE OUT LEVEL ANGLE

9
ZOOM

Examples:
To select preset number 5, press
5.
To select preset number 10, press
10.
To select preset number 15, press
10, 1, then 5.
To select preset number 30, press
10, 3, then 0.

Rewind the tape.
Main unit:
DOWN

Rewind the tape.

Fast-forward the tape.

• You can also use the ¡ or 1 button.

UX-G70[U].book Page 10 Monday, April 17, 2006 5:18 PM

Playing Back a Disc

On-screen guide icons

INFO

Before operating a disc, be familiar how a disc is recorded.
• DVD Video/DVD-VR comprises of “Titles” which
includes “Chapters,” DVD Audio/MP3/WMA/MPEG-1/
MPEG-2/ASF/DivX comprises of “Groups” which
includes “Tracks,” JPEG comprises of “Groups” which
includes “Files,” and CD/SVCD/VCD comprises of only
“Tracks.”
• For playback of MP3/WMA/JPEG/MPEG-1/MPEG-2/
ASF/DivX, see also page 27.

• During DVD Video playback, the following icons may
appear on the TV:

To insert a disc

• The following icons will be also shown on the TV to
indicate your current operation.
,
,
,
,
,
• To deactivate the on-screen guide icons, see “ON
SCREEN GUIDE” in “OTHERS menu” on page 37.

You can insert a disc while playing another source.

At the beginning of a scene containing
multi-angle views.
At the beginning of a scene containing
multi-audio sounds.
At the beginning of a scene containing
multi-subtitles.

To select a disc
Remote Control:
DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

Playback
starts.

(while holding...)

Main Unit:
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
To close the disc tray, press the upper part of the same
button. The tray closes and playback starts.
• When current selected disc tray is open, you can use
DVD/CD 3 to close the disc tray and start playback
(depending on how the disc is programmed internally).
• While one of the trays is open, the tray closes automatically
by pressing down EJECT for the next tray, then the next tray
comes out.
To start:

To pause:

Playback starts.

To select a title/group

Remote
ONLY

While playing a disc...
GROUP/TITLE SKIP

To stop:

DVD/CD

To release, press
DVD/CD 3.
• While playing DVD/SVCD/VCD/MP3/WMA/MPEG-1/
MPEG-2/ASF/DivX: This System can store the stop point,
and when you start playback again by pressing DVD/CD 3
(even while on standby), it starts from the position where
you have stopped—Resume Play. (“RESUME” appears on
the display when you stop playback.)
To stop completely while Resume is activated, press 7
twice. (To cancel Resume, see “RESUME” on page 37.)
• When operating the System, the on-screen guide icon
(see the following table) appears on the TV.

(while holding...)

• You can select a title/group directly by pressing a number
button after pressing GROUP/TITLE (except for DVD-VR
disc).
• Group name appears for MP3/WMA playback.

UX-G70[U].book Page 11 Monday, April 17, 2006 5:18 PM

To select a chapter/track

To playback using the disc menu

• For VCD/SVCD, cancel PBC (see the right column).
While playing a disc...
• First time you press 4, you
GROUP/TITLE SKIP
will go back to the beginning of
the current chapter/track.

7 For DVD Video/DVD Audio:

1 Show the disc menu.
TOP MENU/PG

MENU/PL

RETURN

ECHO

2 Select an item on the disc menu.

Remote
ONLY

To locate a particular portion

TV CH

While playing a disc...

KEY

– SLOW +
x2

x10

x20

x60

x10

x20

x60

• Search speed changes as illustrated above except for MP3/
WMA/DivX discs. For MP3/WMA/DivX discs, search
speed and the indications on the TV are different.
• No sound comes out if searching is carried out while
showing the moving picture.
To return to normal playback, press DVD/CD 3.
• For DivX, each time you press the > or < button, you can
skip to a scene for 30 seconds or 5 minutes depending on
the DivX file.
KEY

To locate an item directly

Remote
ONLY

KEY

ENTER/SET

KEY
TV CH

• With some discs, you can also select items by entering the
number using the number buttons.
7 For SVCD/VCD with PBC:
While playing a disc with PBC, “PBC” appears on the
display.
When disc menu appears on the TV, select an item on the
menu. Playback of the selected item starts.
DISC 1
DISC 2
DISC 3
Examples:
3
1
2
To select number 5, press 5.
DISC 4
DISC 5 A.STANDBY
To select number 10, press 10.
6
4
5
To select number 15, press 10,
SCAN MODE VFP
SLEEP
1, then 5.
9
8
7
To select number 30, press 10,
LINE OUT LEVEL ANGLE ZOOM
3, then 0.
10
10
0

Remote
ONLY

You can select a title/chapter/track directly and start
playback.
• For DVD Video, you can select a title before starting
playback, while you can select a chapter after starting
playback.
DISC 1
DISC 2
DISC 3
Examples:
3
1
2
To select number 5, press 5.
DISC 4
DISC 5 A.STANDBY
To select number 10, press 10.
6
4
5
To select number 15, press 10,
SCAN MODE VFP
SLEEP
1, then 5.
9
8
7
To select number 30, press 10,
LINE OUT LEVEL ANGLE ZOOM
3, then 0.
10
10
0

To move to the next or previous page of the current
menu:
GROUP/TITLE SKIP

Moves to the next page.
Moves to the previous page.

To return to the previous menu:
TOP MENU/PG
RETURN

(while holding...)

To cancel PBC, press 7, then select a track. Playback starts
with the selected track.
To reactivate PBC, press 7 (twice if Resume is turned
“ON”), then press DVD/CD 3.

UX-G70[U].book Page 12 Monday, April 17, 2006 5:18 PM

Playing Back a Portable Audio Device

INFO

By using QP Link (Quick Portable Link), you can easily start
playing back a portable audio device connected to the LINE
IN jack (see page 5).
• Make sure to set the volume of your portable audio device
loud enough so that the System can detect the sound signal.

To activate QP Link

Remote
ONLY

QP LINK
CLOCK/TIMER

INFO

This System is equipped with a USB AUDIO terminal on the
front panel. You can connect your PC to this terminal and
enjoy sound reproduced through your PC.
When you connect your PC for the first time, follow the
procedure below.
• Remember you cannot send any signal or data to your PC
from this System.

IMPORTANT
QPLINK ON

• Always set volume to “VOL MIN” when connecting or
disconnecting the other equipment.

QPLINK OFF

How to install the USB drivers
1 Turn on your PC and start running WindowsR 98*,

(while holding...)

When QP Link is activated, connecting a portable device to
the LINE IN jack and starting playback performs the
following:
• While listening to another source...
Changes the source to LINE automatically. (If you change
from LINE to another source, QP Link will be canceled.)
• While the System is on standby...
Turns on the System and activates the LINE source
automatically (except when the display is turned off).
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

Playing Back from the PC

Bubbles appear
when QP Link
works.

WindowsR 98SE*, WindowsR Me*, WindowsR 2000*,
or WindowsR XP*.
• If the PC has been turned on, quit all the applications
running.
Select “USB” as the source.

Remote control:

Main unit:

USB

3 Connect the System to the PC using a USB cable (not
supplied).

While QP Link plays back the device...
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

At the front panel
PC

Bubbles disappear
when the sound signal
stops or is too weak.

USB cable

• Use “USB series A plug to B plug” cable less than
3 m.
The USB drivers are installed automatically.

To playback sound on the PC
Refer to the manuals supplied with the sound reproduction
application installed in the PC.
• Noise and static electricity may stop the sound through the
USB connection. In this case, do the following operations:
– Disconnect and connect the USB cable again
– Restart the music software on your PC
– Turn off and on the System
* MicrosoftR, WindowsR 98, WindowsR 98SE,
WindowsR Me, WindowsR 2000 and WindowsR XP are
registered trademarks of Microsoft corporation.

UX-G70[U].book Page 13 Monday, April 17, 2006 5:18 PM

Daily Operations—Sound & Other Adjustments
Remote control

To drop the volume in a moment
A.STANDBY

VFP

Remote
ONLY

To restore the volume, press again, or
adjust the volume level.

FADE
MUTING

SLEEP
DIMMER

SCAN MODE
LINE OUT LEVEL

DISPLAY
, , ,

ENTER/SET

Adjusting the Sound

INFO

To reinforce the heavy sound
This boosts the low and high frequency sound—Sound
Turbo II.

DVD LEVEL
AHB PRO

SOUND
TURBO

3D PHONIC
CLOCK/TIMER

TURBO ON

BASS/TREBLE
VOLUME
+,–

SHIFT
SOUND TURBO

FADE
MUTING

TURBO OFF
• When Sound Turbo II is turned on, AHB Pro is
automatically turned on, and cannot be turned off.
(AHB PRO indicator does not light even though the
function is turned on.)

Main unit

To reinforce the bass sound

Remote
ONLY

While Sound Turbo II is off, the richness and fullness of the
bass sound is clearly maintained regardless of how you set
the volume—Active Hyper Bass Pro.
DVD LEVEL
AHB PRO

SOUND
TURBO

AHB ON
AHB OFF

VOLUME +,–

• When Sound Turbo II is turned on, AHB Pro setting cannot
be changed.

To adjust the tone

Remote
ONLY

You can adjust the bass and treble level from –3 to +3.
To adjust the bass
BASS/
TREBLE

Adjusting the Volume
You can adjust the volume level from VOL MIN to level 40
(VOL MAX).
Remote control:

BASS TREBLE
Canceled
TV VOLUME

VOLUME

To adjust the treble

Main unit:
VOLUME

BASS/
TREBLE

BASS TREBLE
Canceled
TV VOLUME

VOLUME
TV VOLUME

VOLUME

UX-G70[U].book Page 14 Monday, April 17, 2006 5:18 PM

Creating 3-dimentional Sound Field
Remote
ONLY

—3D Phonic

• This does not function for MPEG-1/MPEG-2/ASF/DivX
discs.
While playing a disc...

Adjusting the Audio Input Level

Remote
ONLY

If the sound from the component connected to the LINE IN
jack is too loud or is too quiet when changing from another
source to LINE, you can change the audio input level
through the LINE IN jack (without changing the volume
level).
2 sec.

3D PHONIC
AUDIO/MPX

ENTER/SET

L.IN LVL1

L.IN LVL2

L.IN LVL3
(initial setting)

(while holding...)
3D PHONIC

ACTION

3D PHONIC

DRAMA

3D PHONIC

OFF

3D PHONIC

THEATER

L.IN LVL1

Select this when the sound is too loud
with “L.IN LVL 2” selected. This setting
is recommended when connecting an
audio device other than a portable audio
device to the LINE IN jack.

• The selected mode can only be shown on the TV.
ACTION

Suitable for action movies and sports
programs.

L.IN LVL2

DRAMA

Creates natural and warm sound. Enjoy
movies in a relaxed mood.

Select this when the sound is too loud
with “L.IN LVL 3” selected.

L.IN LVL3

Select this when listening to a portable
audio device or recording the sound from
it (initial setting).

THEATER Enjoy sound effects like in a major theater.

Presetting Automatic DVD Video Sound
Increase Level

Adjusting the Audio Output Level

Remote
ONLY

DVD Video sound is sometimes recorded at a lower level
than other discs and sources. You can set the increase level
for the currently loaded DVD Video, so you do not have to
adjust the volume when you change the source.
• This only functions for DVD Video and DVD-VR format
disc.
DVD LEVEL
AHB PRO

Remote
ONLY

If the recorded sound on the device connected to the LINE
OUT jack is too loud or too quiet, you can change the audio
output level through the LINE OUT jack (without changing
the volume level).
LINE OUT LEVEL

L.OUT LVL1
(initial setting)

L.OUT LVL2
NORMAL MEDIUM
HIGH

(while holding...)

(initial setting)

L.OUT LVL1

Select this when recording the sound
with a portable audio device (initial
setting).

L.OUT LVL2

Select this when the recorded sound is
too loud with “L.OUT LVL 1” selected.

(while holding...)

NORMAL

Original recording level.

MEDIUM

Output level is increased (less than “HIGH”).

HIGH

Output level is increased (more than
“MEDIUM”). (initial setting)

UX-G70[U].book Page 15 Monday, April 17, 2006 5:18 PM

Remote
ONLY

Changing the Display Brightness

Changing the Picture Tone

You can dim the display window.

• While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
taste.

TV/VIDEO
DIMMER

DIMMER OFF
(Canceled)

DIMMER ON

To select a preset picture tone

AUTO DIM

1 While playing, display VFP setting screen.

DIMMER ON Dims the display.
AUTO DIM*

NORMAL

Removes the display illumination when
starting playback a disc with a video
source.
• The display illuminates when playback
stops.

* “AUTO DIM” does not work for CD/MP3/WMA.

Changing the Scanning Mode

Remote
ONLY

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

On the TV

(while holding...)

2 Select a preset picture tone.
KEY

KEY

INFO

This System supports progressive scanning.
Select the video signal mode according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT jacks, you can enjoy a high quality picture from the
built-in DVD player by selecting “NTSC PROG” or
“PAL PROG.”
SCAN MODE

VFP

PAL PAL PROG
NTSC PROG NTSC

NORMAL

CINEMA

USER2

USER1

Normally select this.

CINEMA

Suitable for a movie source.

USER1/USER2

You can adjust parameters and can
store the settings.

To remove the screen, press VFP again while holding
SHIFT, or wait for more than 5 seconds.

To adjust the picture tone
(while holding...)

1 Select “USER1” or “USER2.”
ENTER/SET

• Follow steps 1 and 2 explained above.

2 Select a parameter you want to adjust.
TV CH

ENTER/SET

NTSC

Select for a conventional NTSC TV.

NTSC PROG

Select for a progressive NTSC TV.
Select to enjoy a progressive scanned
picture through the Video Component
out terminal.

PAL

Select for a conventional PAL TV.

PAL PROG

Select for a progressive PAL TV.
Select to enjoy a progressive scanned
picture through the Video Component
out terminal.

TV CH

GAMMA

Adjust if the neutral color is bright
or dark (–3 to +3).

BRIGHTNESS

Adjust if the entire picture is bright
or dark (–8 to +8).

CONTRAST

Adjust if the far and near positions
are unnatural (–7 to +7).

SATURATION

Adjust if the picture is whitish or
blackish (–7 to +7).

TINT

Adjust if the human skin color is
unnatural (–7 to +7).

SHARPNESS

Adjust if the picture is indistinct
(–8 to +8).
Continued on the next page

UX-G70[U].book Page 16 Monday, April 17, 2006 5:18 PM

3 Adjust the parameter.

Turning Off the Power Automatically

TV CH

ENTER/SET

Remote
ONLY

Auto Standby

TV CH

A.STANDBY

4 Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again while holding SHIFT,
or wait for more than 5 seconds.
Remote
ONLY

Setting the Clock

INFO

Without setting the built-in clock, you cannot use Daily
Timers (see page 34) and Sleep Timer.
• To correct a mis-entry during the process, press CANCEL
or CLOCK/TIMER. You can return to the previous step.

Canceled

(while holding...)

When Auto Standby is in use, the A.STBY indicator lights
on the display.
When disc play stops, the A.STBY indicator starts flashing.
If no operation is done for about 3 minutes while the
indicator is flashing, the System turns off (on standby)
automatically.

Sleep Timer

1 Activate the clock setting mode.
QP LINK
CLOCK/TIMER

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

You can set the shut-off time so that you can go to bed
without turning it off yourself.

1 Specify the time (in minutes).
SLEEP

• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
Set the time.
• Adjust the hour and press ENTER/SET, then adjust the
minute and press ENTER/SET.
KEY

ENTER/SET

KEY

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

Now the built-in clock starts working.
To check the current clock time during play
DISPLAY
CANCEL

(while holding...)

Disc type*

Clock

Source information
* This appears depending on the disc type.

9
(while holding...)

120 150

Canceled

2 Wait until the set time disappears.
To check the time remaining until the shut-off time, press
SLEEP while holding SHIFT.
• If you press the button repeatedly, you can change
the shut-off time.

UX-G70[U].book Page 17 Monday, April 17, 2006 5:18 PM

Unique DVD/VCD Operations

Number
buttons

ANGLE
, ,

ZOOM

SHIFT

INFO

For DVD Video/DivX: While playing back a chapter
containing audio languages, you can select the language to
listen to.
For DVD Audio: While playing back a track containing
audio channels, you can select the audio channel to listen to.
For DVD-VR and Karaoke CD/SVCD/VCD: When
playing back a track, you can select the audio channel to
play.
• You can also select the audio track using the on-screen bar
(see page 23).
3D PHONIC
AUDIO/MPX

DVD/CD 3
8
SLOW ,
AUDIO/MPX

Remote
ONLY

Selecting the Audio Track

Remote control

ENTER
/SET
7

While playing a DVD Video...
PAGE

Ex.:
1/3

C.VOICE
SUBTITLE

3/3

2/3

ENGLISH

1/3

FRENCH

JAPANESE

2/3

ENGLISH

3/3

FRENCH

JAPANESE

While playing a DVD Audio/DivX...
Ex.:
2/3

1/3
1

3/3

While playing a DVD-VR, or Karaoke CD/SVCD/VCD...
3D PHONIC
AUDIO/MPX

SVCD
ST1
R2

ST2
L2

L1
R1

DVD-VR/Karaoke CD/VCD
ST
L
R

ST1/ST2/ To listen to normal stereo (2-channel)
ST
playback.
L1/L2/L

To listen to the left audio channel.

R1/R2/R

To listen to the right audio channel.

• SVCD can have 4 audio channels. SVCD usually uses
these 4 channels to record two 2-channel recordings
(ST1/ST2).

UX-G70[U].book Page 18 Monday, April 17, 2006 5:18 PM

Remote
ONLY

Selecting the Subtitle Language

For DVD Video/DivX: While playing back a chapter
containing subtitles in different languages, you can select the
subtitle language to display on the TV.
For DVD-VR: While playing, you can turn the subtitles on
or off.
For SVCD: While playing, you can select the subtitles even
if no subtitles are recorded on the disc.
• You can also select the subtitle language using the onscreen bar (see page 23).

Remote
ONLY

Selecting the View Angle

For DVD Video only: While playing back a chapter
containing multi-view angles, you can view the same scene
from different angles.
• You can also select the multi-view angles using the onscreen bar (see page 23).
While playing...
ANGLE

While playing a DVD Video/DivX...

(while holding...)
1/3

C. VOICE
SUBTITLE

1/3

Ex.:

ENGLISH

1/3

3/3

2/3

1/3

ENGLISH

2/3
2

3/3
3

2
TV CH

Selecting the Browsable Still Pictures

Remote
ONLY

TV CH

Ex.:
1/3
ENGLISH

1/3
ENGLISH

2/3
FRENCH

2/3

3/3
JAPANESE

3/3

FRENCH

JAPANESE

(while holding...)

While playing a DVD-VR...
C. VOICE
SUBTITLE
ON

While playing an SVCD...
C. VOICE
SUBTITLE

For DVD Audio only: While playing back a track linked to
browsable still pictures (B.S.P.), you can select the still
picture (turn the page) to be shown on the TV screen.
• If a track is linked to browsable still pictures (B.S.P.), they
are usually shown automatically during playback.
• You can also select the page using the on-screen bar
(see page 23).
Each time you press
the button (while
PAGE
FM/PLAY MODE
holding SHIFT), the
still picture changes
one after another
(if available).

OFF

Playing Back Bonus Group

Remote
ONLY

For DVD Audio only: Some DVD Audio discs have a
special group called “bonus group” whose contents are not
open to the public.
• To playback a bonus group, you have to enter the specific
“key number” (a kind of password) for the bonus group.
The way of getting the key number depends on the disc.

1 Select the bonus group.
• The bonus group is usually recorded as the last group
(for example, if a disc contains 4 groups including a
bonus group, “group 4” is the bonus group).
• For how to select the group, see “To select a title/group”
on page 10.

UX-G70[U].book Page 19 Monday, April 17, 2006 5:18 PM

2 Enter the key number.
DISC 1

1
DISC 4

4
SCAN MODE

DISC 2

DISC 3

Slow-motion playback
• This does not function for MPEG-1/MPEG-2/ASF/DivX
discs.

ENTER/SET

DISC 5 A.STANDBY

VFP

SLEEP

1 While playing...
Still picture playback starts.

ANGLE

3 Follow the interactive instructions shown on the
screen.

2 Select slow motion speed.
Forward slow motion starts.

– SLOW +

1/32

To cancel the key number entry, press 7.

1/16

1/8

1/4

1/2

Reverse slow motion*starts.

Making Dialogues Clear—Clear Voice

Remote
ONLY

When you playback a disc, you can use this function—Clear
Voice. You can make the singer’s voices or dialogues of the
movie clear.
• This function only works when 3D Phonic is activated.

3D PHONIC
(On)

C. VOICE
SUBTITLE

Off
(while holding...)

1/32

Remote
ONLY

1/8

1/4

1/2

*Only available for DVD Video.
To resume normal playback, press DVD/CD 3.

To replay the previous scenes
(One-Touch Replay)
• This function is only used while playing DVD Video/
DVD-VR.
While playing back...
The playback position moves
back about 10 seconds before the
current position (only within the
same title).

GROUP/TITLE

Special Effect Playback

1/16

INFO

Pause playback
To pause:

To resume normal
playback:

Zoom
• For JPEG, see page 28.

While playing...

DVD/CD

1 While playing back...
ZOOM

Frame-by-frame playback
1 While playing...

ZOOM 1

ZOOM 2

ZOOM OFF

ZOOM 3

ZOOM 6

ZOOM 4
ZOOM 5

(while holding...)

Still picture playback starts.

• As the number increases, magnification also increases.

2 Move the zoomed-in position.
TV CH

2 Advance the still picture frame by frame.

KEY

KEY
TV CH

To resume normal playback, press DVD/CD 3.

To cancel Zoom, press ZOOM (while holding SHIFT)
repeatedly until “ZOOM OFF” appears on the TV.

UX-G70[U].book Page 20 Monday, April 17, 2006 5:18 PM

Advanced Disc Operations
Programming the Playing Order—

Remote control

Remote
ONLY

Program Play

You can arrange the playing order of the chapters or tracks
(up to 99) before you start playback.
• Program play cannot be used for DVD-VR/JPEG/
MPEG-1/MPEG-2/ASF/DivX.
• Resume does not work for Program Play.

Number
buttons
ZOOM
TOP MENU/PG
, , ,

CANCEL
MENU/PL
ENTER/SET

1 Before starting playback, activate Program Play.
PAGE
FM/PLAY MODE

PROGRAM
RANDOM
Canceled

ON SCREEN
DVD/CD 3
8
¡
REPEAT A-B
REPEAT

INFO

7
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

4,¢
FM/PLAY
MODE

On the display

SHIFT
PROGRAM

No
1
2
3
4
5
6
7
8
9
10

Disc

Group/Title

Track/Chapter

USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.

Main unit
On the TV

2 Select chapters or tracks you want for Program Play.

DVD/CD 8
DVD/CD #

4, 7, ¢

• For DVD Video/DVD Audio/MP3/WMA:
1 Select a disc number.
2 Select a title or group number.
3 Select a chapter or track number.
4 Repeat the above steps 1 to 3.
• For SVCD/VCD/CD:
1 Select a disc number.
2 Select tracks.
3 Repeat the above steps 1 and 2.
To enter the numbers directly:

EJECT
DISC 1

DISC 2

DISC 3

DISC 4

4
SCAN MODE

DISC 5 A.STANDBY

VFP

SLEEP

LINE OUT LEVEL ANGLE

9
ZOOM

Examples:
To enter number 5, press 5.
To enter number 10, press 10.
To enter number 15, press 10,
1, then 5.
To enter number 30, press 10,
3, then 0.

UX-G70[U].book Page 21 Monday, April 17, 2006 5:18 PM

3 Start playback.
DVD/CD

Playing at Random—Random Play
Playback starts in the order you
have programmed.

Remote
ONLY

You can play all chapters or tracks at random.
• Random Play cannot be used for DVD-VR/JPEG/
MPEG-1/MPEG-2/ASF/DivX and some DVDs.

1 Before starting playback, activate Random Play.
To skip a step:

To pause:

To stop:

GROUP/TITLE SKIP

PAGE
FM/PLAY MODE

To release, press
DVD/CD 3.

PROGRAM
RANDOM
Canceled
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

To check the programmed contents
Before or after playback...
TV CH

2 Start playback.
In the reverse order.
DVD/CD

TV CH

In the programmed order.
• You can also use 4 or ¢ to check the programmed
contents.

To skip a chapter/
track:

Playback starts in random order.
Random Play ends when the
entire disc has been played.

To pause:

To stop:

To modify the program
Before or after playback...
To erase the last To erase the
track:
entire program:
DISPLAY
CANCEL

To add another
track to the
program:
Repeat step 2.

To go to the beginning To release, press
DVD/CD 3.
of the current track,
press 4.

To exit from Random Play
Before or after playback...
PAGE
FM/PLAY MODE

To exit from Program Play
Before or after playback...
PAGE
FM/PLAY MODE

PROGRAM RANDOM
Canceled

UX-G70[U].book Page 22 Monday, April 17, 2006 5:18 PM

Remote
ONLY

Playing Repeatedly

A-B Repeat

INFO

• You can also select the repeat mode using the on-screen bar
(see pages 24 and 25).
• For MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX, see
page 28.

You can repeat playback of a desired portion by specifying
the beginning (point A) and the ending (point B).
• A-B Repeat cannot be used for MP3/WMA/MPEG-1/
MPEG-2/ASF/DivX and for some DVDs.

1 While playing (without PBC for SVCD/VCD), select
Repeat Play

the start point (A).

You can repeat playback.
REPEAT A-B
REPEAT

• For DVD Video/Audio:
While playing...
REPEAT A-B
REPEAT

GROUP

1
Canceled

DISC ALL

appears on the
display.
A•
appears on the
TV if the TV is turned
on.

(while holding...)

2 Select the end point (B).
• For CD/SVCD/VCD:
While playing (without PBC for SVCD/VCD) or before
playback...
REPEAT A-B
REPEAT

1 DISC

Canceled

DISC ALL

(while holding...)

• For DVD-VR:
While playing an original program...
REPEAT A-B
REPEAT

REPEAT A-B
REPEAT

1 DISC

GROUP

Canceled

appears on the
display.
A-B appears on the
•
TV.
• You can search for the
end point using the ¡
button.

To cancel A-B Repeat, press REPEAT A-B again while
holding SHIFT.
• A-B Repeat will also be canceled when you stop play or
skip the chapter or track.

DISC ALL

Prohibiting Disc Ejection—Child Lock
While playing a playlist...
REPEAT A-B
REPEAT

GROUP

Canceled

DISC ALL

Repeats the current chapter/track.

GROUP

Repeats the current title (for DVD Video)/
group (for DVD Audio)/title of PG or PL (for
DVD-VR).

1 DISC

Repeats the current disc.

DISC ALL

Repeats all discs.

Main Unit
ONLY

You can lock the disc trays so that no one can eject the
loaded disc.
• This is possible only while the System is on standby.
While the disc trays are closed...

(while holding...)
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.

UX-G70[U].book Page 23 Monday, April 17, 2006 5:18 PM

On-screen Disc Operations

Remote
ONLY

INFO

You can check the disc information and use some functions
through the on-screen bar.

On-screen Bar Information
1 Disc type
2 Playback information

On-screen bars
DVD Video

Dolby D
DVD-VIDEO 3/2.1ch

TIME 1:25:58
0:00:58
CHAP233 TOTAL
DISC 1TITLE
TITLE
14 2CHAP

TIME
TIME

CHAP.

OFF
OFF

1/3
1/3

DVD-AUDIO
TIME

LPCM DISC 1
2/0.0ch

OFF

GROUP 14 TRACK 23 TIME

0:00:58

1/ 3 PAGE 1/ 3

TRACK

DVD-VR

1
TIME

1/3
1/1

DVD Audio

DVD-VR

1/1/3
3

2
Dolby D
2/0.0ch

OFF

4
SVCD

2
1/3
ST1

OFF
OFF

-/1/3
4

Current title of original program

Current title of playlist

TRACK 14

Current track

TOTAL 1:25:58

Time indications

3 Operation modes
Indication

1/3

Forward/Reverse search

Forward/Reverse slow-motion
Pause

4 Function icons (on the pull-down menu)

1/3

3
OFF

TIME 1:25:58
0:00:58
DISC
TRACK
233 TOTAL
TITLE
141 CHAP

1/3

1/3
ST

OFF
OFF

1
OFF
OFF

1/3

Select for chapter search.

TRACK

Select for track search.

1/3

Select to change the audio
language or channel (see also
page 17).

1/3

Select to change subtitle language
(see also page 18).

1/3

Select to change the view angle
(see also page 18).

1/3

4
MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX

2
TIME 1:25:58
00:00:58
CHAP 23 TOTAL

Select to repeat playback.

CHAP.

TIME 1:25:58
0:00:58
DISC
TRACK
233 TOTAL
TITLE
141 CHAP

Meanings
Select to change the time
indication.
Select for time search.

1/3

Meanings

Stop

FILE

Current group

TIME

VCD

Current chapter

Indication

TIME
TIME

CHAP 3
GROUP 1

VCD

TIME
TIME

Current title

DISC
TIME 1:25:58
0:00:58
TRACK
233 TOTAL
TITLE
141 CHAP

SVCD
TIME
TIME

Current disc

TITLE 2

Playback

Meanings
Audio format
Channel number

DISC 1

2 CHAP 3 TOTAL 0:00:58

DISC 1 PG

CHAP.

Indication
Dolby D, LPCM
3/2.1ch, 2/0.0 ch

3
PAGE 1 / 5

Select to change the page (see also
page 18).

UX-G70[U].book Page 24 Monday, April 17, 2006 5:18 PM

To operate using the On-screen Bar

For detailed operations of the following functions, see
also “To operate using the On-screen Bar” on the left.

Ex.: Selecting a subtitle (French) for DVD Video
While a disc is selected as the source...

To change the time information

1 Display the entire on-screen bar.

You can change the time information in the on-screen bar
and the display window on the main unit.

ON SCREEN
KARAOKE

Dolby D

DISC 1 TITLE 2 CHAP 3 TIME 0:00:58

Dolby D

TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
DISC 1TITLE
14 2CHAP

DVD-VIDEO 3/2.1ch

*
DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF

CHAP.

1/3
1/3

1/1/3
3

pull-down menu.

1/3
1/1

Dolby D

DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF

disappears
* This does not appear for MP3/WMA/JPEG/MPEG-1/
MPEG-2/ASF/DivX discs.

2 Select (highlight) the item you want.
KEY

1 While playing, display the on-screen bar with the

Dolby D

ENTER/SET

TIME

1/3
1/3

CHAP.

1/3
1/3

1/3
1/1

TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE 2CHAP

1/3
1/3

CHAP.

1/3
1/3

1/3
1/1

1/3
1/3

1/3
1/1

REM

0:11:23

TOTAL 1:01:58

TIME

Elapsed playing time of the current
chapter/track (except for DVD-VR).

REM

Remaining time of the current chapter/
track (except for DVD-VR).

TOTAL

Elapsed disc time.

T.REM

Remaining disc time.

3 Display the pop-up window.
DISC 1

0:00:58

T. REM 0:35:24

TIME 1:25:58
0:00:58
CHAP233 TOTAL
TITLE
DISC 1TITLE
14 2CHAP

ENTER/SET

1/3
1/3

CHAP.

2 Make sure TIME is selected (highlighted).
3 Change the time indication.

KEY

DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF

TIME 1:25:58
0:00:58
CHAP233 TOTAL
DISC 1TITLE
TITLE
14 2CHAP

To remove the on-screen bar

ENGLISH

ON SCREEN

4 Select the desired option in the pop-up window.

KARAOKE

TV CH

DISC 1TITLE
TOTAL 1:25:58
1:01:58
CHAP233 TOTAL
TITLE
14 2CHAP

CHAP.

1/3
1/3

1/3
2/3

1/3
1/1

FRENCH

TV CH

Repeat Play
• See also page 22.

1 While playing a disc (without PBC for SVCD/VCD),

5 Finish the setting.
ENTER/SET

Pop-up window disappears.

display the entire on-screen bar.
• Repeat Play can be selected before starting playback,
except for DVD Video/DVD-VR.

2 Select OFF .
3 Display the pop-up window.
To remove the on-screen bar
ON SCREEN
KARAOKE

DVD-VIDEO
TIME
TIME

Dolby D
3/2.1ch

OFF
OFF
OFF

TOTAL 1:25:58
1:01:58
DISC 1TITLE
CHAP233 TOTAL
TITLE
14 2CHAP

CHAP.

1/3
1/3

1/3
1/1

UX-G70[U].book Page 25 Monday, April 17, 2006 5:18 PM

4 Select the repeat mode you want.
A-B
TITLE
GROUP
DISC
ALL
CHAPTER*
TRACK*
PG

PL
OFF

Repeats a desired portion (see below).
Repeats the current title.
Repeats the current group.
Repeats the current disc.
Repeats all discs (except for DVD).
Repeats the current chapter.
Repeats the current track.
Repeats the current title of original
program (for DVD-VR only) (see also
page 22).
Repeats the current title of playlist (for
DVD-VR only) (see also page 22).
Cancels Repeat Play.

* During Program Play and Random Play, “STEP”
appears.

To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF”
in step 4.

Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.

1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
• Time Search can be used before starting playback,
except for DVD Video/DVD-VR.

2 Select
.
3 Display the pop-up window.
Dolby D

1/3
1/3

1/3
1/1

You can specify the time in hours/minutes/seconds.

ENTER/SET

DISC 1

DISC 2

DISC 3

DISC 4

SCAN MODE

• See also page 22.

Dolby D
3/2.1ch

OFF
OFF

TOTAL 1:25:58
1:01:58
DISC 1TITLE
CHAP233 TOTAL
TITLE
14 2CHAP

1/3
1/3

CHAP.

1/3
1/3

1/3
1/1

OFF

6
SLEEP

To move to a point of 54
(minutes): 00 (seconds),
press 0, 5, 4, 0, then 0.

ANGLE

• It is always required to enter the hour digit (even “0”
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a mis-entry, press Cursor < to erase the last
entry.

5 Finish the setting.

4 Select “A-B.”
TV CH

ENTER/SET
Dolby D
3/2.1ch

DVD-VIDEO
TIME
TIME

OFF
OFF

TV CH

DISC 1TITLE
TITLE
14 2C

CHAP.

The System starts playing the disc
from the selected playing time.

1/3
1/3

A–B

5 Select the start point (A).

Chapter/Track Search

ENTER/SET

Dolby D
3/2.1ch

DVD-VIDEO
TIME
TIME

A-

DISC 1TITLE
TITLE
14 2CHC

CHAP.

1/3
1/3

6 Select the end point (B).
ENTER/SET

5
VFP

1 While playing, display the entire on-screen bar.
2 Select OFF .
3 Display the pop-up window.

Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0,
then 0.

DISC 5 A.STANDBY

A-B Repeat

TIME
TIME

1/3
1/3

CHAP.

TIME _ : _ _ : _ _

4 Enter the time.

5 Finish the setting.

DVD-VIDEO

TIME 1:25:58
0:00:58
DISC 1TITLE
CHAP233 TOTAL
TITLE
14 2CHAP

DVD-VIDEO 3/2.1ch
TIME
OFF
TIME
OFF

A-B Repeat starts. The selected
portion plays repeatedly.
• Before pressing ENTER/SET, you
can search for the end point using
the ¡ button.

You can search for the chapter (DVD Video/DVD-VR) or
track (DVD Audio) number to play.

1 While playing, display the entire on-screen bar.
2 Select CHAP. or TRACK .
3 Display the pop-up window.
DVD-VIDEO
TIME
TIME

Dolby D
3/2.1ch

OFF

TOTAL 1:25:58
1:01:58
DISC 1TITLE
CHAP233 TOTAL
TITLE
14 2CHAP

1/3
1/3

CHAP.
CHAPTER

1/3
1/3

1/3
1/1

UX-G70[U].book Page 26 Monday, April 17, 2006 5:18 PM

4 Enter the desired chapter/track number.
DISC 1

DISC 2

DISC 3

DISC 4

4
SCAN MODE

DISC 5 A.STANDBY

VFP

SLEEP

ANGLE

Control screen for DVD-R/-RW in DVD-VR format

Examples:
To select chapter/track 5,
press 5.
To select chapter/track 10,
press 1, then 0.
To select chapter/track 15,
press 1, then 5.
To select chapter/track 30,
press 3, then 0.

• To correct a mis-entry, press the number keys until the
desired number shown in the pop-up window.

5 Finish the setting.
ENTER/SET

The control screen is superimposed on the TV screen when
you call up Program List (PG) or playlist (PL).
To select playback type
To select the Program
List:
RETURN

ECHO

To remove the list, press the same button again.

The System starts playing the
searched chapter or track.

ORIGINAL PROGRAM
No
1
2
3
4
5
6

Browsable Still Pictures

Title
La fleur
The last struggle
free flyer
BOOM!
Mr. Lawrence
Satisfy U

No
1
2
3
4

Date
03/12/06
15/12/06
24/12/06
27/12/06

Chap
002
004
013
017

Length
0:23:24
1:04:39
0:41:26
0:09:08

Title
Nebula G.
CDJ
Secret Garden
S. Walker

0:00:58

1 2

4 Select a still picture you want.
TV CH

OUP 14 TRACK 23 TIME
PAGE 3/5

TV CH

0:00:58

1
2
3
4
5
6
7
8

Listed number
Recording date
Recording channels
Recording time
Title
Highlight bar (current selection)
Chapters included
Playback time

5 Finish the setting.
ENTER/SET

To select an item in the list and start playback
TV CH

ENTER/SET
TV CH

PAGE 1/5

1/3

Time
12:15
23:05
08:17
07:47
19:38
14:20

PLAY LIST

2 Select PAGE 1 / 5 .
3 Display the pop-up window.
TRACK

Ch
L
L
L
L
L
L

Ex.: When playlist is selected.

screen bar.

DISC 1 GROUP 14 TRACK 23 TIME
DVD-AUDIO LPCM
2/0.0ch

Date
03/12/06
09/12/06
18/12/06
20/12/06
25/12/06
28/12/06

1 2

1 While playing a DVD Audio, display the entire on-

OFF

MENU/PL

TOP MENU/PG

Ex.: When Program List is selected.

• See also page 18.
For DVD Audio only: While playing back a track linked to
browsable still pictures (B.S.P.), you can select the still
picture (turn the page) to be shown on the TV.
• If a track is linked to browsable still pictures (B.S.P.), they
are usually shown automatically during playback.

TIME

To select the playlist:

UX-G70[U].book Page 27 Monday, April 17, 2006 5:18 PM

To move the highlight bar between group list and track
list

Operations on the Control Screen
Remote
ONLY

INFO

KEY

Moves the bar to the track
list.

You can search for and play the desired items through the
control screen for MP3/WMA/JPEG/MPEG-1/MPEG-2/
ASF/DivX discs.

Control screen for MP3/WMA/JPEG/MPEG-1/
MPEG-2/ASF/DivX discs
The control screen automatically appears on the TV screen
when you load an MP3, WMA JPEG, MPEG-1, MPEG-2,
ASF or DivX disc.
Ex.: When the MP3 disc is loaded.

REPEAT TRACK TIME : 00:00:14

1
2
3
4

Group : 2 / 3
Spring
Summer
Fall
Winter
Track Information
Title
Rain
Artist
Album

Track : 6 / 14 (Total 41)
Cloudy.mp3
Fair.mp3
Fog.mp3
Hail.mp3
Indian summer.mp3
Rain.mp3
Shower.mp3
Snow.mp3
Thunder.mp3
Typhoon.mp3
Wind.mp3
Winter sky.mp3

Moves the bar to the group
list.
To select an item in the list
Move the highlight bar to the
desired item.
• If you move the highlight bar
while playing back an MP3/
WMA file or DVD-VR (PG/PL)
disc, the selected track starts
playback automatically.

TV CH

6
7
8
9
To start playback
For JPEG:

0
-

ENTER/SET

5
DVD/CD

1
2
3
4
5
6
7
8
9

0
-

Current group number/total group number
Current group
Group list
Track information (ID3 Tag Version 1.0: only for
MP3/WMA)
Current track
Repeat Play setting
Elapsed playing time of the current track
(except for JPEG)
Operation mode icon
Current track number/total number of tracks in the
current group (total number of tracks on the loaded
disc)
Highlight bar
Track list

The selected track (still picture)
is displayed until you change it.

Slide-show playback starts.
Each track (still picture) is
shown on the screen for about 3
seconds, then changes one after
another.

For the other files:
ENTER/SET

Playback starts with the selected
track.
• Pressing DVD/CD 3 also
starts playback.

• Once you start playing back a JPEG/MPEG-1/MPEG-2/
ASF/DivX track, the control screen disappears.
• To cancel slide-show and display the current still picture,
press 8.

• If files of different types (MP3, WMA, JPEG,
MPEG-1, MPEG-2, ASF and DivX) are recorded on a
disc, select the file type to play (see page 36).

UX-G70[U].book Page 28 Monday, April 17, 2006 5:18 PM

To select a group (for MP3/WMA/JPEG/MPEG-1/
MPEG-2/ASF/DivX):

To zoom in the JPEG files
• You cannot zoom in the still picture during slide-show.
• For other discs, see page 19.

1 While playing back a still picture...

GROUP/TITLE SKIP

• During slide-show, press 8 to display the still picture,
then...
ZOOM

(while holding...)

To skip a track:

ZOOM 1

To stop playback:

ZOOM 2
ZOOM OFF

GROUP/TITLE SKIP

(while holding...)

2 Move the zoomed-in position.
• You can select a group directly by pressing a number
button after pressing GROUP/TITLE (except for DVD-VR
disc).

1 DISC

GROUP

Canceled

DISC ALL

To repeat slide-show for JPEG
While playing or before playback...
REPEAT A-B
REPEAT

1 DISC

GROUP
Canceled

DISC ALL

To repeat MPEG-1/MPEG-2/ASF/DivX playback
While playing or before playback...
REPEAT A-B
REPEAT

GROUP

Canceled

Repeats the current track.

GROUP

Repeats the current group.

1 DISC

Repeats the current disc.

DISC ALL

Repeats all discs.

KEY

KEY
TV CH

To repeat MP3/WMA playback
While playing or before playback...
REPEAT A-B
REPEAT

TV CH

1 DISC
DISC ALL

To cancel Zoom, press ZOOM (while holding SHIFT)
repeatedly until “ZOOM OFF” appears on the TV.

UX-G70[U].book Page 29 Monday, April 17, 2006 5:18 PM

Advanced Tape Operations
IMPORTANT
It may be unlawful to record or playback copyrighted
material without the consent of the copyright owner.

Remote control

Recording on a Tape

INFO

You can use type I tapes for recording.
• To play a tape, see page 9.

1 Insert a recordable cassette.
Push

FM/AM
DVD/CD 3
7

Insert

USB
LINE
TAPE

With the tape side facing outside

2 Select and start playing the source—“FM,” “AM,”
“DVD/CD,” “USB,” or “LINE.”
• When recording a disc, you can also use “Synchronized
Disc Recording” (see page 30).

3 Start recording.

REC

Main unit
On the main unit

PUSH OPEN 0

REC
DVD/CD 8

To stop recording:

TAPE

DVD/CD #

7
USB

FM/AM

LINE

UX-G70[U].book Page 30 Monday, April 17, 2006 5:18 PM

Synchronized Disc Recording

INFO

You can start and stop both disc play and tape recording at
the same time.

To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc (except for DVD Video/DVD-VR).

1 Start playing a disc.
To record the entire disc
DVD/CD

1 Load a disc and insert a recordable cassette.
• If the current playing source is not the disc player, press
DVD/CD 3, then 7.

2 While a track you want to record on the tape is

2 Start recording.
REC

playing...
The System automatically
creates 4-second blanks between
the tunes recorded on the tapes.

On the main unit

• When either disc play* or recording ends, both disc player
and the cassette deck stop at the same time.
* For DVD Video: When a title is finished playing.
To record Program Play
1 Select Program Play (and make a program), but do not
start playback.
2 Press REC to start recording.
• When disc play stops, recording stops automatically.

REC

On the main unit

The disc player returns to the
beginning of that track and the
track is recorded on the tape.
After recording the track, the
disc player and cassette deck
automatically stop.

3 Repeat steps 1 and 2 to record other tracks you want.
• You can change the disc if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with
adhesive tape.

UX-G70[U].book Page 31 Monday, April 17, 2006 5:18 PM

Enjoying Karaoke
IMPORTANT
Always set MIC VOLUME to MIN when connecting or
disconnecting the microphone.

Remote control

DO NOT keep the microphone connected
while they are not in use.

Singing Along (Karaoke)
KEY , KEY
ECHO
RESERVE
FM/AM
DVD/CD 3
7

KARAOKE
LINE
TAPE
USB

INFO

To sing along using the Karaoke discs
You can enjoy Karaoke using the Karaoke disc (except
Karaoke CD).
• By pressing REC, you can record your singing-along (for
SVCD/VCD without PBC).

1 Turn MIC VOLUME to MIN.
VOLUME

AUDIO/MPX
MIN

MAX

SHIFT

2 Connect the microphone (not supplied) to the MIC
jack.
MIC

VOLUME

MIN

MAX

3 Insert and start playing a Karaoke disc.
4 Select an audio track.

Main unit

3D PHONIC
AUDIO/MPX

MIC jack
MIC VOLUME

• For details, see “Selecting the Audio Track” on page 17.

REC
DVD/CD 8

5 Sing into the microphone.
6 Adjust the MIC VOLUME and VOLUME.
VOLUME

TAPE

DVD/CD #

7
USB

FM/AM

LINE

MIN

VOLUME

MAX

VOLUME

UX-G70[U].book Page 32 Monday, April 17, 2006 5:18 PM

To adjust the Key (disc playback only)

4 Activate Vocal Masking.

1 Activate Key Control.

ON SCREEN
KARAOKE

KEYCON V.MASKING
OFF

(Canceled)
(while holding...)

5 Sing into the microphone.
6 Adjust the MIC VOLUME and VOLUME.

2 Adjust the Key

VOLUME

VOLUME
KEY

KEY

To raise the
key.
To lower the
key.

(while holding...)

MIN

MAX

• You can apply echo to your voice.
To deactivate Vocal Masking, select “OFF” in step 4.

• Key Control cannot be activated for DVD Audio/
DVD-VR/MPEG-1/MPEG-2/ASF/DivX.
To deactivate Key Control, press KARAOKE (while
holding SHIFT) to select “OFF.”

To apply echo to your voice
MENU/PL
ECHO

ECHO ON

Microphone Mixing
You can enjoy microphone mixing while playing any source.
• By pressing REC, you can record your singing-along
(except when the playing source is “TAPE”).

1 Turn MIC VOLUME to MIN.
VOLUME

ECHO OFF
(Canceled)
(while holding...)

MIN

To sing along using the stereo discs
—Vocal Masking
You can enjoy Karaoke while playing a stereo disc.
Vocal Masking reduces the lead vocal of any disc except
DVD Audio and DVD-VR.

1 Turn MIC VOLUME to MIN.
VOLUME

MAX

2 Connect the microphone (not supplied) to the MIC
jack.

3 Start playing the source—“FM,” “AM,” “DVD/CD,”
“USB,” “TAPE,” or “LINE.”

4 Sing into the microphone.
5 Adjust the MIC VOLUME and VOLUME.
VOLUME

VOLUME
MIN

MAX

2 Connect the microphone (not supplied) to the MIC
jack.

3 Insert and start playing a stereo disc.
DVD/CD

MIN

MAX

• You can apply echo to your voice. While playing a disc,
you can also adjust Key Control and apply echo.

UX-G70[U].book Page 33 Monday, April 17, 2006 5:18 PM

Reserving Karaoke Songs

Remote
ONLY

4 Start playback.
DVD/CD

—Karaoke Program Play

Playback starts in the order
you have programmed.

You can determine the playback order of the titles or tracks
on the disc player. You can program up to 12 steps.

1 Change the source to “DVD/CD.”

To check the programmed contents
During Karaoke Program Play...

DVD/CD
SET UP
RESERVE

The Karaoke reserve
screen appears.

2 Activate Karaoke Program Play.
(while holding...)
SET UP
RESERVE

To modify the program
While the Karaoke reserve screen is shown on the TV...
To remove the unwanted track:

(while holding...)
TV CH

No
1
2
3
4
5

Disc Gr/Tt Tr/Chap

On the TV screen

• PRGM indicator flashes during this mode.
Select songs you want for Karaoke Program Play.
Press the number buttons to select a song in the following
order.
1 Select a disc.
2 Select a title/group.
3 Select a chapter/track.
Examples:
DISC 1
DISC 2
DISC 3
To select number 5, press 5.
3
1
2
DISC 4
DISC 5 A.STANDBY
To select number 10, press 10.
6
4
5
To select number 15, press 10,
SCAN MODE VFP
SLEEP
1, then 5.
9
8
7
To select number 30, press 10,
LINE OUT LEVEL ANGLE ZOOM
3, then 0.
10
10
0

DISPLAY
CANCEL
TV CH

To add another track to the program:
Repeat step 3.
To erase the entire program:
2 sec.
DISPLAY
CANCEL

To exit from Karaoke Program Play
Before or after playback...
SET UP
RESERVE

(while holding...)

During playback...
SET UP
RESERVE

(while holding...)

UX-G70[U].book Page 34 Monday, April 17, 2006 5:18 PM

Timer Operations
1 Select one of the timer setting modes you want to set—
REC TIMER (Recording Timer) ON time, DAILY 1
ON time, DAILY 2 ON time or DAILY 3 ON time.

Remote control

QP LINK
CLOCK/TIMER

AUDIO
Recording Timer

Daily Timer 1

Daily Timer 2

REC TIMER ON (Time) DAILY 1 ON (Time) DAILY 2 ON (Time)
Clock setting ON (Time) DAILY 3
Canceled

CANCEL
ENTER/SET

(see page 16)

Daily Timer 3

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

Ex. When Daily Timer 1 setting mode is selected

CLOCK
/TIMER

• When the clock has not been set, pressing
CLOCK/TIMER makes the System enter the clock
setting mode.
Make the timer setting as you want.
Repeat the procedure for the following settings until
finished:
KEY

Setting the Timer

Remote
ONLY

KEY

ENTER/SET

INFO

Using Daily Timer, you can wake up with your favorite
music. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast or the sound from LINE IN
automatically.
You can store three Daily Timer settings and one Recording
Timer setting; however, you can activate only one of the
timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a mis-entry during process, press CANCEL.
You can go back to the previous step.
Recording Timer and Daily Timer initial settings when
shipped from the factory
• REC TIMER: ON Time (6:00)/OFF Time (10:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 1: ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2: ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3: ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)

For Recording Timer:
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—“TUNER-FM,”
“TUNER-AM,” or “LINE IN.”
4 For “TUNER-FM” and “TUNER-AM”: Select a
preset channel.
5 Select the volume level.
• You can adjust the volume level
(“0” to “40” and “VOL – –”).
If you select “VOL – –,” the volume is set to the last
level when the unit has been turned off.
For Daily Timers:
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—“TUNER-FM,”
“TUNER-AM,” “TAPE,” “DISC,” or “LINE IN.”
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

4 For “TUNER-FM” and “TUNER-AM”: Select a
preset channel.

UX-G70[U].book Page 35 Monday, April 17, 2006 5:18 PM

For “DISC”: Select the disc tray number, the title/
group number, then the chapter/track number.
5 Select the volume level.
• You can adjust the volume level
(“0” to “40” and “VOL – –”).
If you select “VOL – –,” the volume is set to the last
level when the unit has been turned off.
Once settings are complete, the Timer setting information
appears in sequence.
• This function is not available for VCD with PBC
activated.
Turn off the unit (on standby) if you have set the
on-time.

To turn on or off the Timer
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
To cancel the Timer

1 Select the Timer (REC TIMER, DAILY 1, DAILY 2,
or DAILY 3) you want to cancel.
QP LINK
CLOCK/TIMER

Recording Timer

Daily Timer 1

Daily Timer 2

REC TIMER ON (Time) DAILY 1 ON (Time) DAILY 2 ON (Time)
Canceled
Clock setting ON (Time) DAILY 3
(see page 16)
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

Daily Timer 3

Ex. To cancel Daily
Timer 1

How Daily Timer works
Once the Daily Timer has been set, the timer indicator
(
) and timer number indicator (1/2/3) are lit on the
display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next column) or another timer is activated.

2 Turn off the selected Timer.

When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the loaded disc with the specified chapter or
track, and sets the volume level gradually to the preset
level after about 30 seconds.
• While Daily Timer is working, the timer indicator (
)
and timer number indicator (1/2/3) flash on the display.

To turn on the Timer

When the off-time comes
The System stops playback, and turns off (on standby)
automatically.
• The timer setting remains in memory until you change
it.

How Recording Timer works
When Recording Timer has been set, Timer (
)
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
When the on-time comes
The System turns on, tunes in to the specified station or
changes the source to “LINE”, and starts recording.
When the off-time comes
The System stops recording, and turns off (on standby).
• The timer setting remains in memory until you change
it.

DISPLAY
CANCEL

1 Select the Timer (REC TIMER, DAILY 1, DAILY 2,
or DAILY 3) you want to activate.
QP LINK
CLOCK/TIMER

Recording Timer

Daily Timer 1

Daily Timer 2

REC TIMER ON (Time) DAILY 1 ON (Time) DAILY 2 ON (Time)
Canceled
Clock setting ON (Time) DAILY 3
(see page 16)

Daily Timer 3

2 Activate the selected Timer.
ENTER/SET

MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
GROUP RANDOM PRGM 3D PHONIC
PRGR. B.S.P. BONUS REC 1 2 3

Ex. When Daily Timer 1 (DAILY 1) is
activated

3 Wait until the indication disappears.

UX-G70[U].book Page 36 Monday, April 17, 2006 5:18 PM

Setup Menu Operations
Initial settings

Remote Control

INFO

Remote
ONLY

The Setup Menu cannot be activated during playback.

1 Press SET UP.
LANGUAGE

, , ,
SET UP

ENTER/SET

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

ENGLISH

ON SCREEN LANGUAGE

ENGLISH

2
3
4
5

Press (or ) to select the menu.
Press
(or ) to select the item.
Press ENTER/SET.
Press
(or ) to select the options, then press
ENTER/SET.
• For settings of the LANGUAGE menu, see also
“Language Code List” on page 42.
To remove a preference display
Press SET UP.

LANGUAGE menu
Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE

Contents
You can select the initial menu language of the DVD Video.
You can select the initial audio language of the DVD Video.
You can select the initial subtitle language of the DVD Video.
You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.

PICTURE menu
Item
MONITOR TYPE
16:9

4:3 LB

4:3 PS

PICTURE SOURCE

SCREEN SAVER
FILE TYPE

Contents
You can select the monitor type to match your TV when you playback DVD Video discs recorded for
wide-screen televisions.
16:9/16:9 MULTI (Wide television screen): For a wide-screen (16:9) TV.
4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a
wide-screen picture to fit the width of the TV screen keeping the aspect ratio.
4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed
in to fill the screen vertically and the left and right sides of the picture are cut off.
• For multi-color system TVs, select the [MULTI] option.
You can obtain optimal picture quality by selecting the source type of the disc contents.
AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of
the current disc according to the disc information.
FILM: For a film source disc.
VIDEO: For a video source disc.
You can set the screen saver function to ON or OFF. If no operation is done for about 5 minutes, the
display dims.
You can select the file type to play.
AUDIO: To play MP3/WMA files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1, MPEG-2, ASF and DivX files.

UX-G70[U].book Page 37 Monday, April 17, 2006 5:18 PM

AUDIO menu
Item
DIGITAL AUDIO OUTPUT

DOWN MIX

D.RANGE COMPRESSION

Contents
Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a builtin Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.
Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound with full dynamic range.
ON: Select this when you want to fully apply the compression effect to make the sound at lower
volume clear (useful at midnight).

OTHERS menu
Item
RESUME

ON SCREEN GUIDE
DivX REGISTRATION

Contents
You can select Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc tray.
OFF: Resume is deactivated.
Activate or deactivate the on-screen guide.
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a disc in which the Registration Code is recorded, the System’s
Registration Code is overwritten for copyright protection.

UX-G70[U].book Page 38 Monday, April 17, 2006 5:18 PM

Additional Information
Learning More about This System
Connections (see pages 3 to 5)
• Make sure the antenna conductors do not touch any other
terminals, connecting cords or the power cord. Also, keep
the antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the System.
• The speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly, it
may cause color distortions. So, pay attention to the
following when installing the speakers.
– When placing the speakers near a TV set, turn off the
TV’s main power switch or unplug it before installing the
speakers.
Then wait at least 30 minutes before turning on the TV’s
main power switch again.
– Some TVs may still be affected even though you have
followed the above instructions. If this happens, move
the speakers away from the TV.
• When a portable audio device is connected to the LINE IN
jack, sound will come out of the speakers and headphones.
However, no sound will come out of the LINE OUT jack.
Daily Operations—Playback (see pages 7 to 12)
Listening to the Radio:
• If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc:
• On some DVD, SVCD, or VCD discs, the actual operations
may be different from what is explained in this manual, due
to the programming and disc structure; such differences are
not a malfunction of this System.
• When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows. (When DVD
Video, DVD Audio or SVCD/VCD with PBC is loaded in
the System, playback of the disc next to these discs will not
start.):
Ex.: When DISC 2 is selected:
DISC 2]DISC 3]DISC 4]DISC 5]DISC 1]
(then stops)
* When no disc is loaded on the disc tray, that disc number
is skipped.

• You can exchange discs while playing or selecting another
disc.
• Some DVD Audio discs prohibit downmix. When you
playback such a disc, “LR ONLY” appears on the display
and the System plays back the left front and right front
signals.
• When playing back a DVD Audio disc recorded in MLP
(Meridian Lossless Packing; a lossless audio compression
system that can completely recreate the PCM signal), the
signals are recognized as the linear PCM signals, however,
no indicator lights up on the display.
• This System can recognize up to 4 000 tracks in a disc.
Also, the System can recognize up to 150 tracks per group
and up to 99 groups in a disc.
– If there are any unplayable files in a folder, those files are
also counted in the total file number.
– Playable files which do not belong to any groups are
handled as Group 1.
• For DVD-VR playback...
– This System can play only a disc of UDF-Bridge format.
– For details about DVD-VR format and playlist, refer to
the manual of the recording equipment.
– You cannot use reverse slow motion, Program Play, or
Random Play.
• For MP3/WMA playback...
– MP3/WMA discs require a longer readout time than
regular CDs. (It depends on the complexity of the group/
file configuration.)
– Some MP3/WMA files cannot be played back and will
be skipped. This results from their recording processes
and conditions.
– This System can play only a disc of ISO 9660 Level 1 or
Level 2.
– This System can playback MP3/WMA files with the
extension code <.mp3> or <.wma> (regardless of the
letter case—upper/lower).
– It is recommended that you make each MP3/WMA file at
a sampling rate of 44.1 kHz and at a bit rate of 128 kbps.
This System cannot playback files made at a bit rate of
less than 64 kbps.
• For JPEG files playback...
– It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
– This System can play only baseline JPEG files*.
Progressive JPEG files* or lossless JPEG files* cannot
be played.
* Baseline JPEG format: Used for digital cameras,
web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely used
now.

UX-G70[U].book Page 39 Monday, April 17, 2006 5:18 PM

– This System can playback JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).
– This System may not playback JPEG files properly if
they are recorded on a device other than a digital still
camera.
– During slide-show playback, zoom cannot be operated.
• For MPEG-1/MPEG-2 playback...
– The stream format should conform to MPEG system/
program stream.
– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is
recommended for the highest resolution.
– This System also supports the resolutions of 352 x 576/
480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480
x 480/ 352 x 240 pixels (30 fps).
– The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple profile at Main Level)/
MP@LL (Main Profile at Low Level).
– Audio streams should conform to MPEG1 Audio layer-2
or MPEG2 Audio Layer-2.
• For ASF playback...
– This System can play back ASF files with the extension
code <.asf> (regardless of the letter case—upper/lower).
– This System supports ASF files whose resolution is
352 x 288 pixels or less.
– Some recorded files may not be able to playback
depending on file characteristics, kind of digital camera/
video camera, or recording conditions.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play and
Random Play.
• For DivX playback...
– This System can play only a disc of UDF-Bridge format.
“Multi-border” is not supported.
– The System supports DivX files whose resolution is 720
x 480 pixels or less (30 fps), and 720 x 576 pixels or less
(25 fps).
– Audio stream should conform to MPEG1 Audio Layer-2
or MPEG Audio Layer-3 (MP3).
– This System can play back DivX files with the extension
code <.divx> <.div> <.avi> (regardless of the letter
case—upper/lower).
– The System does not support GMC (Global Motion
Compression).
– The file encoded in the interlaced scanning mode may
not be played back correctly.
– You cannot use the following functions—One Touch
Replay, Slow motion, A-B Repeat, Program Play,
Random Play and on-screen operations.
Playing Back a Portable Audio Device:
• When QP Link fails due to a weak sound signal from the
LINE IN jack, Auto Standby may turn the System off even
if you can hear the sound from the speakers.

In such cases, adjust the volume level of the component
louder so that the System can detect the sound signal
properly.
• Changing from LINE to another source while QP Link
works will deactivate QP Link temporarily.
In this case, the following reactivates QP Link:
– Pressing QP LINK on the remote control.
– Unplugging the component from the LINE IN jack, then
plugging it again.
• If you press STANDBY
to turn the System off or if
preset Timer turns the System off while QP Link works, the
System will deactivate QP Link temporarily.
In such cases, the following reactivates QP Link:
– When no sound signal comes from the LINE IN jack for
about 30 seconds after the System is turned off.
– When you turn on the power again.
• QP Link may start working when you just plug in the
component to the LINE IN jack or unplug it. This is not a
malfunction.
Playing Back from the PC:
• Check if your PC equipped with the CD-ROM drive is
running on WindowsR 98*, WindowsR 98SE*,
WindowsR Me*, WindowsR 2000*, or WindowsR XP* and
prepare its CD-ROM.
*MicrosoftR, WindowsR 98, WindowsR 98SE,
WindowsR Me, WindowsR 2000 and WindowsR XP are
registered trademarks of Microsoft corporation.
• DO NOT turn off the System or disconnect the USB cable
while installing the drivers or until your PC has recognized
the System.
• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the
USB cable and connect it again. If this does not work,
restart Windows.
• The drivers installed can be recognized only when the USB
cable is connected between the System and your PC.
• The sound may not be played back correctly—interrupted
or degraded—due to your PC settings or PC specifications.

Daily Operations—Sound & Other Adjustments
(see pages 13 to 16)
Adjusting the Sound:
• This function also affects the sound through the
headphones.
Changing the Scanning Mode:
• You cannot change the scanning mode to progressive in the
following cases:
– When your TV does not support the progressive video
input.
– When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.

UX-G70[U].book Page 40 Monday, April 17, 2006 5:18 PM

Unique DVD/VCD Operations (see pages 17 to 19)
Selecting the Audio Track:
• On some DVD Video discs, you cannot change audio
languages while playing back.
Special Effect Playback:
• During slow-motion playback, no sound will be
reproduced.
• While zoomed in, the picture may look coarse.

Advanced Disc Operations (see pages 20 to 28)
Programming the Playing Order—Program Play:
• While programming steps...
– You cannot eject any discs from the disc trays.
– Your entry will be ignored if you have tried to program
an item number that does not exist (for example,
selecting track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
• When DVD Video or DVD Audio is loaded in this System,
playback of the disc next to the DVD Video or DVD Audio
ALL /REPEAT ALL on the TV
will not start, although
screen or
ALL in the display window is shown.
• A-B Repeat can be used within the same title while playing
a DVD Video, and within the same track for the other discs.
On-screen Disc Operations:
• For DVD-R/-RW in the VR format, “PG” or “PL” appears
instead of “TITLE” on the on-screen bar.
Operations on the Control Screen:
• If you press ON SCREEN on the remote control during
playback, playback information appears on the TV screen.

Advanced Tape Operations (see pages 29 and 30)
Recording on a Tape:
• The recording level is automatically set correctly. Thus,
you can adjust the sound you are actually listening to
without affecting the recording level.
• There is leader tape which cannot be recorded onto at the
start and end of cassette tapes. Thus, when recording CDs
or radio broadcasts, wind the leader tape first to ensure that
the recording will be made without any music part lost.
• If you start recording with no cassette inserted, “NO REC”
appears on the display. If a protected tape has been
inserted, “NO REC” appears.
• You cannot open or close the disc tray while recording a
disc.
Synchronized Disc Recording:
• Synchronized recording does not function on the file
format of MPEG-1, MPEG-2, ASF, and DivX.

Enjoying Karaoke (see pages 31 to 33)
Singing Along (Karaoke):
• Karaoke mode setting (Key Control and Vocal Masking)
can be used when selecting “DVD/CD” as the source,
except for DVD-VR/DVD Audio/MPEG-1/MPEG-2/ASF/
DivX discs.

Even if the source is “DVD/CD,” Karaoke mode setting
cannot be used while “NO DISC” appears on the display.
• Karaoke mode setting is automatically canceled when the
source is changed.
• Even when the microphone is not used, Key Control and
Vocal Masking are available.
• Karaoke mode setting is also applied to the optical digital
output signals.
• When Vocal Masking is activated, 3D Phonic will be
canceled temporarily.
• On some music discs, Vocal Masking does not provide the
correct effect.
• You can also use the microphone when selecting the source
other than “DVD/CD.”

Timer Operations (see pages 34 and 35)
Setting the Timer:
• If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not
work correctly.
Timer Priority:
• If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.

Setup Menu Operations (see pages 36 and 37)
General:
• If the upper and lower parts of the menu are cut off, adjust
the picture size control of the TV.
LANGUAGE menu:
• When the language you have selected for MENU
LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is
not recorded on a disc, the original language is used as the
initial language.
PICTURE menu—MONITOR TYPE:
• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size
may become 4:3 letter box while playing a disc. This
depends on how the discs are recorded.
• When you select “16:9/16:9 MULTI” for a picture whose
aspect ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
• The setup menu and on-screen bar will be displayed (and
recorded) even though this function is set to “OFF.”
Subtitles and the information for zoom-in always appear on
the display regardless of this setting.

UX-G70[U].book Page 41 Monday, April 17, 2006 5:18 PM

Troubleshooting
General:
Adjustments or settings are suddenly canceled before
you finish.
] There is a time limit. Repeat procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the AC power
cord and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
No picture appears on the screen.
] The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The System is connected to a TV which does not support
progressive video input.
The left and right edges of the picture are missing on the
screen.
] Select “4:3 LB/4:3 MULTI LB” for “MONITOR TYPE”
(see page 36).

“NO AUDIO” appears.
] This System cannot playback illegally produced DVD
Audio discs.
“LR ONLY” appears.
] Some DVD Audio discs prohibit downmixed output.
When you playback such a disc, this System plays back
the left front and right front signals only.
The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs are programmed to always display no
subtitle initially. If this happens, press SUBTITLE after
starting playback (see page 18).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs are programmed to always use the original
language initially. If this happens, press AUDIO/MPX
after starting playback (see page 17).
The disc tray does not open or close.
] The AC power cord is not plugged in.
] Child Lock is in use. “LOCKED” appears in the display
window (see page 22).

Tape Operations:
The cassette holder cannot be opened.
] Power supply from the AC power cord has been cut off
while the tape was running. Turn on the System.

Radio Operations:

USB Operations:

Hard to hear broadcasts because of noise.
] Antennas connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and positioned.

Unable to playback through the USB connection.
] USB connection and setting is incorrect.
Playback stops.
] Disconnect and connect the USB cable again.
] Restart the music software on your PC.
] Turn off and on the System.

Disc Playback Operations:
The disc does not play.
] You have inserted a disc whose Region Code is not
correct. (“REGION ERR” appears on the display.)
] The disc is placed upside down. Place the disc with the
label side up.
ID3 Tag on an MP3/WMA disc cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version 2.
This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups and
tracks were recorded. It depends on the writing
application.
MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF or DivX
files are not played back.
] The disc may include different types of tracks (MP3/
WMA files, JPEG files and MPEG-1/MPEG-2/ASF/
DivX files). In this case, you can only playback the files
selected by the “FILE TYPE” setting (see page 36).
] You have changed the “FILE TYPE” setting after the
System read the disc. In this case, reload the disc.

Timer Operations:
Daily Timer does not work.
] The System has been turned on when the on-time comes.
Timer starts working only when the System is turned off.
Daily Timer does not start playback.
] The disc loaded is a DVD Video. Change the disc.
] Title/group number and chapter/track number are not
entered while setting the Daily Timer. Do not skip these
steps when you want to play a disc using Daily Timer.

UX-G70[U].book Page 42 Monday, April 17, 2006 5:18 PM

Language Code List
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU

Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque

FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL

Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic

KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC

Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan

OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU

(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese

SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU

Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu

Maintenance
To get the best performance of the System, keep your discs,
tapes and mechanism clean.

Handling discs
• Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when
placing it back in its case.
• Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.

– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as
insecticides to it.
– DO NOT allow any rubber or plastic to remain in contact
for a long time.
To remove the speaker grilles:

Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in waterdiluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:

Speaker
grille

Holes

Projection

UX-G70[U].book Page 43 Monday, April 17, 2006 5:18 PM

OPTICAL DIGITAL OUT Signals
DIGITAL AUDIO
OUTPUT
Playback disc
DVD Video
with 48 kHz, 16/20/24 bit Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
DVD Audio
with 48/96/192 kHz, 16/20/24 bit
Linear PCM
with 44.1/88.2/176.4 kHz,
16/20/24 bit Linear PCM
with Dolby Digital
with DTS
DVD-R/-RW in DVD-VR format
with 48 kHz, 16/20/24 bit Linear PCM
with Dolby Digital
SVCD, VCD, CD
CD with DTS
MP3/WMA/MPEG-1/MPEG-2/DivX
ASF

Output Signals
STREAM/PCM

DOLBY DIGITAL/PCM

PCM ONLY

48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
DTS bitstream
48 kHz, 16 bit Linear PCM

48 kHz, 16 bit Linear PCM*
44.1 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
DTS bitstream

48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM

48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM
32/44.1/48 kHz, 16 bit Linear PCM
32 kHz, 16 bit Linear PCM

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL
DIGITAL OUT terminal.

Operating JVC’s TVs Using the Remote Control
You can use the remote control to operate JVC’s TVs.
Remote control

Turn on/off TV.

While holding SHIFT, press...
TV
TV/VIDEO
TV CH

SHIFT

TV CH

Change the channels.

TV VOLUME +,–

Adjust the volume.

TV/VIDEO

Change the input mode.

TV VOLUME
+,–

UX-G70[U].book Page 44 Monday, April 17, 2006 5:18 PM

General

Specifications
Amplifier section—CA-UXG70
Output Power: 160 W (80 W+80 W) at 6 Ω (10% THD)
Audio Input
LINE IN:
500 mV/49 kΩ (at “L.IN LVL1”)
250 mV/49 kΩ (at “L.IN LVL2”)
125 mV/49 kΩ (at “L.IN LVL3”)
MIC:
1.6 mV/10 kΩ
Audio Output LINE OUT:
1.0 Vrms (3 kΩ) (at “L.OUT LVL1”)
500 mVrms (1.5 kΩ) (at “L.OUT LVL2”)
SUBWOOFER OUT: 260 mVrms/3.9 kΩ
HEADPHONES OUT:
17 mW/32 Ω
Digital output: DVD OPTICAL DIGITAL OUT:
–21 dBm to –15 dBm (660 nm ±30 nm)
USB input:
USB AUDIO
Video output:
Color system: NTSC or PAL(interlaced/progressive)
VIDEO (composite):
1 V(p-p)/75 Ω
S-VIDEO:Y (luminance)
1 V(p-p)/75 Ω
C (chrominance, burst)
NTSC
0.286 V(p-p)/75 Ω
PAL
0.3 V(p-p)/75 Ω
COMPONENT: (Y)
1 V(p-p)/75 Ω
(PB/PR)
0.7 V(p-p)/75 Ω
Speaker impedance:
6 Ω – 16 Ω
Headphone impedance:
16 Ω – 1 kΩ

Tuner section
FM tuning range:
87.5 MHz – 108.0 MHz
AM (MW) tuning range:
531 kHz – 1 710 kHz (at 9 kHz intervals)
530 kHz – 1 710 kHz (at 10 kHz intervals)
For Saudi Arabia only:
531 kHz – 1 602 kHz (at 9 kHz intervals)
530 kHz – 1 600 kHz (at 10 kHz intervals)

Tape section
Frequency response:
Wow and flutter:

60 Hz – 14 000 Hz
0.15 % (WRMS)

Disc player section
Region codes: Middle East: 2
South East Asia: 3
Playable disc: DVD Video/DVD Audio/CD/VCD/SVCD
CD-R/CD-RW (CD/SVCD/VCD/MP3/
WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX
format)
DVD-R/-RW (DVD-VR/DVD Video/MP3/
WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX
format)
+R/+RW(DVD Video format)
DVD-ROM (DVD Video format)
Dynamic range:
80 dB
Horizontal resolution:
500 lines
Wow and flutter:
Immeasurable

Power requirement:
AC 110 V/AC 127 V/AC 220 V/ AC 230 V-240 V
(adjustable with the voltage selector), 50 Hz/60 Hz
Power consumption:
95 W (at operation)
18 W (at standby)
3.9 W (at standby display OFF mode)
Dimensions (approx.):
175 mm x 250 mm x 411 mm
(W/H/D)
Mass (approx.):
7.9 kg

Speakers—SP-UXG70
Speaker units:

Tweeter:
Squawker:
Woofer:

Impedance:
Dimensions (approx.):
Mass (approx.):

1.5 cm dome x 1
4 cm cone x 1
13.5 cm cone x 1
6Ω
166 mm x 250 mm x 232 mm
(W/H/D)
2.8 kg each

Supplied Accessories
See page 3.
Design and specifications are subject to change without
notice.
• Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “MLP lossless”, and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS 2.0+ Digital Out” are registered trademarks of
Digital Theater Systems, Inc.
• “Official DivX® Certified product” “Plays all versions of DivX®
video (including DivX® 6) with standard playback of DivX®
media files” “DivX, DivX certified, and associated logos are
trademarks of DivX, Inc. and are used under licence.”
• USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE BY A CONSUMER
ENGAGING IN PERSONAL AND NON-COMMERCIAL
ACTIVITIES.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.”

UX-G70[U].book Page 45 Monday, April 17, 2006 5:18 PM

Parts Index
Remote control
Button
AUDIO
TV
7
¡,1
¢,4
8
, , , , ENTER/SET
C.VOICE
(One-Touch Replay)
Number buttons
3D PHONIC
AHB PRO
ANGLE
AUDIO/MPX
A.STANDBY
BASS/TREBLE
CANCEL
CLOCK/TIMER
DIMMER
Disc tray selecting buttons
DISPLAY
DVD LEVEL
DVD/CD 3
ECHO
FADE MUTING
FM/PLAY MODE
FM/AM
GROUP/TITLE
GROUP/TITLE SKIP
KARAOKE
KEY
LINE
LINE OUT LEVEL
MENU/PL
ON SCREEN
PAGE
QP LINK
REPEAT
REPEAT A-B
RESERVE
RETURN
SCAN MODE
SET UP
SHIFT
SLEEP
SLOW 9 , (
SOUND TURBO II
SUBTITLE
TAPE
TOP MENU/PG
TV CH 9 , (
TV VOLUME + , –
TV/VIDEO
USB
VFP
VOLUME + , –
ZOOM

a
s
w
r
v
e
8
t
x
1
y
u
6
y
d
.
h
i
f
2
h
u
q
k
,
n
p
x
v
l
8
z
5
k
l
n
i
b
b
9
7
3
9
o
g
r
;
t
c
7
8
m
f
/
4
m
j

Page
7, 35
43
10, 11, 19, 21, 28, 29, 30, 33
9, 11
9, 11, 21, 28
10, 19, 21, 27
9, 11, 14, 15, 16, 18, 19, 21, 24 – 28, 33 – 36
19
19
9, 11, 19, 20, 25, 26, 33
14
13
18
17
16
13
21, 33, 34, 35
16, 34, 35
15
10
16
14
7, 10, 11, 21, 27, 30, 32, 33
32
13
8, 20, 21
7, 8, 9
10, 28
10, 28
32
32
7
14
11, 26
24
18
12
22, 28
22
33
11
15
36
10, 11, 12, 14, 15, 16, 18, 19, 22, 28, 32, 33, 43
16
19
13
18
7, 9
11, 26
43
43
43
7, 12, 32
15
7, 13
19, 28

Main unit
Button
& STANDBY lamp
7
Cassette holder
DISC 1 - 5 , PLAY , EJECT
Display
DVD/CD #
DVD/CD 8
FM/AM
LINE
LINE IN/OUT jacks
MIC jack
MIC VOLUME
PHONES
REC
Remote sensor
SOUND TURBO II

4
#
~
0
3
7
6
8
^
(
1
=
9
2
5

Page
7, 8
8, 10, 22
9, 29
10, 22
6
7, 8, 10, 27, 30
10, 27
8
7
5
31, 32
31, 32
7
29, 30
5
13

!
@$
%
*
&

TAPE
UP ¢ , DOWN 4
USB
USB AUDIO jack
VOLUME + , –

7, 9
8, 9, 11, 21
12
12
13, 31, 32

Remote control
1

3
4
5
6
7
8
9
p
q
w
e

a
s
d
f
g
h
j
k
l
/
z
x
c
v
b
n
m

r
t
y
u
i
o

,
.

;

This remote control can also operate JVC’s TVs
(see page 43).

Main unit
1

=
~

2
3
4
5
6
7
8
9

!
@
#
$
%
^

(

Cover[U].fm Page 2 Tuesday, March 28, 2006 4:08 PM

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,
Australia, and U.K.)

UX-G70

220V

MICRO COMPONENT SYSTEM

110V

VOLTAGE
SELECTOR

127V
230V-240V

CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check
that your mains (AC) line voltage
corresponds with the position of the
voltage selector switch provided on
the outside of this equipment and, if
different, reset the voltage selector
switch, to prevent from a damage or
risk of fire/electric shock.

0406WMKMDCJEM

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2006:03:28 07:09:37Z
Modify Date                     : 2006:07:14 15:45:01+09:00
Subject                         : GVT0181-008A
Page Count                      : 48
Creation Date                   : 2006:03:28 07:09:37Z
Mod Date                        : 2006:07:14 15:45:01+09:00
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Author                          : JVC
Metadata Date                   : 2006:07:14 15:45:01+09:00
Creator                         : JVC
Title                           : UX-G70
Description                     : GVT0181-008A
Page Mode                       : UseOutlines
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

Jvc Ux G70 Users Manual

UX-G70 to the manual d85dc432-8978-460c-b0ba-3bbb7eb41acd

Navigation menu

Versions of this User Manual:

Views

Navigation