Jvc Xv F80Bk Users Manual F80 ENG
XV-F80BK to the manual 4eeeb92d-8d77-6f24-9d23-e34a72290c46
2015-01-23
: Jvc Jvc-Xv-F80Bk-Users-Manual-322554 jvc-xv-f80bk-users-manual-322554 jvc pdf
Open the PDF directly: View PDF 
.
Page Count: 67
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
Introduction 2
Preliminary knowledge 6
Getting started 16
Basic operations 24
Advanced operations 30
MP3 disc playback 46
Initial settings 49
Additional information 56
!
"#$
,16758&7,216
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
For U.S.A.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND
For Canada / Pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS FORM DIGITAL
APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-
003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS
RADIOELECTRIQUES APPLICABLES AUX APPAREILS
NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME
SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”,
NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de
l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
Warnings, Cautions and Others
Mises en garde, précautions et indications diverses
IMPORTANT FOR LASER PRODUCTS
IMPORTANT POUR LES PRODUITS LASER
1. CLASS 1 LASER PRODUCT
2. CAUTION: Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user service-
able parts inside the Unit; leave all servicing to qualified service
personnel.
1. PRODUIT LASER CLASSE 1
2. ATTENTION: Radiation laser visible quand l'appareil est ouvert ou
que le verrouillage est en panne ou désactivé. Eviter une exposition
directe au rayon.
3. ATTENTION: Ne pas ouvrir le couvercle du dessus. Il n'y a aucune
pièce utilisable à l'intérieur. Laisser à un personnel qualifié le soin
de réparer votre appareil.
Caution –– STANDBY/ON switch!
Disconnect the mains plug to shut the power off completely. The
STANDBY/ON switch in any position does not disconnect the
mains line. The power can be remote controlled.
Attention –– Commutateur STANDBY/ON !
Déconnecter la fiche de secteur pour couper complètement le courant.
Le commutateur STANDBY/ON ne coupe jamais complètement la
ligne de secteur, quelle que soit sa position. Le courant peut être
télécommandé.
CAUTION:
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted candles, on
the apparatus.
• When discarding batteries, environmental problems must be consid-
ered and local rules or laws governing the disposal of these batteries
must be followed strictly.
• Do not use this apparatus in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such as
cosmetics or medicines, flower vases, potted plants, cups, etc.) on
top of this apparatus.
ATTENTION
• Ne bloquez pas les orifices ou les trous de ventilation.
(Si les orifices ou les trous de ventilation sont bloqués par un journal
un tissu, etc., la chaleur peut ne pas être évacuée correctement de
l’appareil.)
• Ne placez aucune source de flamme nue, telle qu’une bougie, sur
l’appareil.
• Lors de la mise au rebut des piles, veuillez prendre en
considération les problèmes de l’environnement et suivre
strictement les règles et les lois locales sur la mise au rebut des
piles.
• N’utilisez pas cet appareil dans une salle de bain ou un autre
endroit avec de l’eau.
Ne placez aucun récipient contenant de l’eau (tel que des
cosmétiques ou des médicaments, un vase de fleurs, un pot de
fleurs, une tasse, etc.) sur cet appareil.
!
1
EnglishEnglish
Table of Contents
Introduction
Page 2
Features...............................................................................2
Supplied accessories..........................................................3
About this instruction manual ..........................................4
Notes on handling..............................................................5
Preliminary knowledge
Page 6
Names of parts and controls.............................................6
Front panel................................................................................6
Display window........................................................................7
Remote control unit .................................................................8
Rear panel...............................................................................10
Operational Principles......................................................11
On-screen displays.................................................................11
To prevent the monitor from burning out
[SCREEN SAVER]................................................................13
On-screen guide icons ...........................................................14
How to use numeric buttons.................................................14
About discs .......................................................................15
Playable disc types.................................................................15
Disc structure..........................................................................15
Getting started
Page 16
Connections ......................................................................16
Before making any connections ...........................................16
To connect to a conventional TV ..........................................16
To connect to a TV with the component video
input jacks............................................................................17
To connect to an audio amplifier or receiver.......................18
To connect to audio equipment with a digital input ...........19
To connect the power cord ...................................................20
Using the remote control unit.........................................20
To install batteries in the remote control unit .....................20
Remote sensor .......................................................................21
To use the remote control unit for TV operation.................22
Basic operations
Page 24
Turning on/off the unit ....................................................24
Inserting and removing discs ..........................................24
Basic playback ..................................................................26
To start playback ....................................................................26
To stop playback completely ................................................27
To stop playback temporarily ...............................................27
To advance or reverse playback rapidly while
monitoring...........................................................................27
To locate the beginning of the scene or song .....................28
Changing discs during playback [PLAY EXCHANGE] .........28
Resuming playback ..........................................................29
To memorize the interrupted position .................................29
To resume playback...............................................................29
Advanced operations
Page 30
Playing from a specific position on a disc......................30
To locate a desired scene from the DVD menu ...................30
To locate a desired scene from the menu of the
Video CD with PBC..............................................................30
To locate a desired selection using the numeric
buttons.................................................................................31
To locate a desired selection using 4 or ¢...................31
To locate a desired scene by specifying the chapter
number [CHAP.SEARCH] ...................................................32
To locate a desired position in the current title or track
[TIME SEARCH]...................................................................32
To locate a desired scene from the display [DIGEST] ........33
Special picture playback ................................................. 34
To advance a still picture frame-by-frame...........................34
To display continuous still pictures [STROBE]....................34
To playback in slow-motion [SLOW]....................................35
To zoom in/out [ZOOM].........................................................35
Changing the playback order ......................................... 36
To playback in the desired order [PROGRAM] ....................36
To playback in random order [RANDOM]............................37
Repeat playback............................................................... 37
To repeat the current selection or all tracks [REPEAT] .......37
To repeat a desired part [A-B REPEAT] ...............................39
Selecting a scene angle of DVD VIDEO ......................... 40
To select a scene angle from the normal screen
[ANGLE]...............................................................................40
To select a scene angle from the angle list display
[ANGLE]...............................................................................41
Changing the language and sound................................ 41
To select the subtitle language [SUBTITLE] ........................41
To change the audio language or sound [AUDIO]..............42
Miscellaneous functions ................................................. 43
To adjust the picture character [VFP] ...................................43
To simulate surround sound [3D PHONIC]..........................44
To check the disc time [TIME SELECT] ................................45
Changing the brightness of the display window.................45
MP3 disc playback
Page 46
About MP3 disc................................................................ 46
Operations........................................................................ 46
Basic operations.....................................................................46
Specifying the desired Group and Track .............................47
Repeat playback .....................................................................48
Initial settings
Page 49
Selecting preferences...................................................... 49
How to set preferences..........................................................49
Language and display preference ........................................49
Audio and system preference...............................................51
Limiting playback by children ........................................ 53
To set Parental Lock for the first time
[PARENTAL LOCK]..............................................................53
To change the settings [PARENTAL LOCK] .........................54
To temporarily release the Parental Lock
[PARENTAL LOCK]..............................................................55
Additional information
Page 56
AV COMPU LINK remote control system...................... 56
Connection and setup............................................................56
Operation................................................................................57
Care and handling of discs.............................................. 58
Troubleshooting .............................................................. 59
Specifications................................................................... 60
Table of languages and their abbreviations.. Appendix A
Country code list for Parental Lock.................Appendix B
!
2
Introduction
Introduction
Features
This unit is a compatible player for DVD VIDEO, Audio CD and Video CD discs.
7
77
7Progressive Scan system
Supports the Progressive scan system, as well as the
conventional (current) Interlace scan system.
* To enjoy the progressive video picture, you must
connect the unit to a television or monitor that
supports the progressive video input.
7
77
7Strobe function
The unit can display nine continuous still pictures on
the TV screen.
7
77
7Digest function
You can select the desired selection to be played from
the opening scenes displayed on the TV screen.
7
77
7Angle function*
You can select a desired angle from multiple camera
angles recorded on the DVD VIDEO disc.
7
77
7Zoom function
You can view scenes close-up.
7
77
7VFP (Video Fine Processor) function
You can adjust the picture character according to the
type of programming, picture tone or personal
preferences.
7
77
7Parental Lock*
You can restrict the playback of DVD VIDEO discs with
scenes which you do not want children to see, such as
adult or violent films.
7
77
7High quality digital sound
You can enjoy high quality sound with Linear-PCM.
7
77
7Surround function*
The unit accommodates the Dolby Digital and DTS
surround systems.
(These surround signals are output only from the
DIGITAL OUT jacks.)
7
77
73D PHONIC function
You can enjoy Virtual surround sound with your
2-channel (stereo) system.
7
77
7Multi-disc tray and continuous playback
You can set up to 7 discs on the disc tray carousel and
playback them continuously.
7
77
7MP3 disc playback
This unit can playback CD discs recorded by the MP3
format (we refer to those discs as “MP3 discs” in this
manual).
7
77
7CD-R/CD-RW playback
You can playback a CD-RW disc recorded with the
Audio CD format, and a CD-R disc recorded with the
Audio CD, Video CD or MP3 format.
7
77
7Multi-language subtitles and sound*
You can select a subtitle or sound language from
those recorded on the DVD VIDEO disc.
7
77
7Operation from the on-screen display
User-friendly on-screen displays allow you to operate
the unit easily.
Functions with (*) mark only work on a DVD VIDEO disc
that is compatible with each function.
Picture functions
Audio functions
Other functions
!
Introduction
3
Introduction
English
Supplied accessories
• Audio/video cable (x 1)
• Component video cable (x 1)
• AV compulink cable (x 1)
• Remote Control Unit (x 1)
• R6P(SUM-3)/AA(15F) batteries (x 2)
• Instruction manual (x 1)
• AC power cord (x 1)
DISC
SELECT
TVDVD
REPEAT3D
PHONIC TV/VIDEO
CANCEL
SUBTITLE
ANGLE
TV1 TV2TV3
TV4 TV5TV6
TV7TV9
TV
-/-- TV0
MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
CHOICE
CH
+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+
ZOOM
-
RETURN
TVDVD
STANDBY/ON
TV8
NEXT
MENU
REMOTE CONTROL
123
56
89
0+10
10
7
4
ENTER
4
¢
1
¡
5
5
5
∞
7
8
3
" !
Introduction
4
Introduction
About this instruction manual
• This instruction manual is written in the following manner.
• This unit can playback CD-R discs recorded by the MP3 format (we refer to those discs as MP3 discs in this manual).
• Regarding operations for MP3 discs, see “MP3 disc playback” on and after page 46. The other sections of this manual
basically do not refer to MP3 disc playback.
You can play tracks on an Audio CD or Video CD discs in
random order by using the Random function.
¶While stopped
1Press ON SCREEN.
The on-screen display appears on the TV screen.
(for Audio CD) (for Video CD)
2Use CURSOR 5/∞ to move to [RANDOM].
3Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the display
window on the front panel. After playing all tracks
of the disc loaded, random playback ends.
•The same track will not be played back more than once
• During Audio CD playback, pressing ENTER when points
[RANDOM] quits random mode and continues playback in
the normal order.
during random play.
• To quit random playback in the middle
NOTE
• Random playback is carried out only within the disc
currently loaded.
Press 7. The unit stops playback and quits the
random playback mode.
To playback in random order
[RANDOM]
These symbols
indicate the types
of discs which the
operation can be
used for.
The number
indicates the
following procedural
step(s) in which the
button(s) is(are)
used.
You may also use the
corresponding
buttons on the front
panel of the unit if
available.
The names of buttons
on the remote control
unit (or on the front
panel of the unit) are
all given in uppercase
letters.
The number
indicates the
procedural step.
Other convenient
procedures, etc.
The color of [RANDOM] changes.
DISC
SELECT TV DVD
TV DVD
STANDBY/ON
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0
MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
ZOOM +
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
1
23
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS ENTER = EXEC4TE
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS ENTER = EXEC4TE
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
!
Introduction
5
Introduction
English
Notes on handling
Important cautions
Installation of the unit
•Select a place which is level, dry and neither too hot
nor too cold (between 5oC and 35oC, 41oF and 95oF).
•Leave sufficient distance between the unit and the TV.
•Do not use the player in a place subject to vibrations.
Power cord
•Do not handle the power cord with wet hands!
•A small amount of power (2.7 W) is always consumed
while the power cord is connected to the wall outlet.
•When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
To prevent malfunction of the unit
•There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
•Do not insert any metallic object into the unit.
•Do not use any non-standard shape disc available on
the market, because it may damage the unit.
•Do not use a disc with tape, seals, or paste on it,
because damage to the unit may result.
Note about copyright laws
•Please check the copyright laws in your country before
recording from DVD VIDEO, Audio CD, Video CD and
MP3 discs. Recording of copyrighted material may
infringe copyright laws.
Note about the copyguard system
•The DVD VIDEO disc is protected by the copyguard
system. When you connect the unit to your VCR
directly, the copyguard system activates and the
picture may not be played back correctly.
Safety precautions
Avoid moisture, water and dust
Do not place the unit in moist or dusty places.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it near
a heating device.
When you are away
When away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet.
Do not insert foreign objects into the unit
Do not insert wires, hairpins, coins, etc. into the unit.
Do not block the vents
Blocking the vents may damage the unit.
Care of the cabinet
When cleaning the unit, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents and disinfectants. These may cause
deformation or discoloring.
If water gets inside the unit
Turn off the power switch and remove the plug from the
wall outlet, then call the store where you made your
purchase. Using the unit in this state may cause a fire or
electrical shock.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works.
© 1992-1998 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. “DTS”, “DTS Digital Surround”, are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All Rights Reserved.
# !
6
Preliminary
knowledge
Preliminary knowledge
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1STANDBY indicator (24)
Lights in red when the power cord is connected and
the unit is on standby. When the unit is turned on,
the STANDBY indicator goes off.
2STANDBY/ON button (24)
Turns the unit on or off (standby).
3DISC (1 through 7) buttons/indicators (26)
Select a disc set on the carousel to be played back by
pressing the appropriate button. The indicator on each
button shows the current status of the corresponding
disc/disc tray.
See “About DISC indicators (1 through 7)” on page 26
for details.
4EXCHANGE/ DISC SKIP button/indicator (25, 28)
This button has two functions. When the indicator is
illuminated, pressing the button activates the play
exchange function. When the indicator is unlit,
pressing the button rotates the carousel.
•When the tray carousel is closed during playback,
pressing the button activates the play exchange
function and opens the carousel.
•When the tray carousel is open during playback, each
press of this button rotates the carousel to access other
trays except the one for the disc being played.
•When the tray carousel is open while stopped, each
press of this button rotates the carousel clockwise
by an amount of accessing the next two trays.
53 (PLAY) button (26)
Starts playback. Also, used as a SELECT button for
PBC of Video CDs.
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
1 STANDBY indicator
8 Remote sensor
3
DISC (1 through 7) buttons/
indicator
s
6 0 (OPEN/CLOSE) button
- Disc tray carousel
0 Display window
9 PROGRESSIVE indicator
7 8 (PAUSE) button
5 3 (PLAY) button
= 7 (STOP) button
~ 4/¢ (SKIP)
buttons
4 EXCHANGE/ DISC SKIP
button/indicator
2 STANDBY/ON button
!
Preliminary knowledge
7
Preliminary
knowledge
English
60 (OPEN/CLOSE) button (24, 28)
Used to open and close the carousel. You can also use
this button in the play exchange mode.
78 (PAUSE) button (27, 34, 46)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
8Remote sensor (21)
Receives signals from the remote control unit.
9PROGRESSIVE indicator (17)
Lights up when the Progressive scan mode is active.
It lights in green during playback of a film-source DVD
VIDEO disc when “PROGRESSIVE MODE” in
“PREFERENCE 1” is set to “SMART”, “FILM” or “AUTO.”
In other conditions when the Progressive scan mode is
active, it lights in red.
0Display window (7)
Indicates the current status of the unit.
-Disc tray carousel
Used to set up to 7 discs.
=7 (STOP) button (27, 46)
Stops playback.
~4/¢ (SKIP) buttons (27, 46)
Used to skip a chapter, title or track. Also, used for
the page selection of a menu screen (for Video CD).
Holding down 4 or ¢ during playback reverses or
advances playback rapidly (except MP3 disc).
Display window
1Audio format indicators
Indicates the format of audio currently being played back.
2Disc indicator
Indicates the type of the disc set in the current tray. When
DVD VIDEO disc is set, “DVD” lights up. When a Video CD
disc is set, “VCD” lights up. When an Audio CD is set,
“CD” lights up.
33 (play)/8 (pause) indicators
3 or 8 illuminates during playback or while paused,
respectively.
Neither of them illuminates while stopped.
4Title/track/chapter indicators
One or more appropriate indicators illuminate according
to the disc inserted.
5Repeat mode indicators
The appropriate indicator illuminates according to the
current repeat mode.
6PROGRAM/RANDOM indicators
The appropriate indicator illuminates while the unit is
in the Program or Random playback mode.
7Multi-information window
Displays the current title/track/chapter number(s), time
and status information.
VCDVD
TITLE TRACK CHAP
A
-
B1
PROGRAM
RANDOM
8
3
2 Disc indicator
3 3 (play)/8 (pause)
indicators
4 Title/track/
chapter indicators
5 Repeat mode indicators
7 Multi-information window
6 PROGRAM/RANDOM indicators
LPCM
MPEG
DOLBY
DIGITAL
DTS
1 Audio format indicators
$ !
Preliminary knowledge
8
Preliminary
knowledge
Remote control unit
1DISC SELECT button (14, 26)
Pressing this button followed by the appropriate numeric
button (1 through 7) within 5 seconds selects a disc to be
played back.
2REPEAT button (37, 48)
Selects the repeat mode.
33D PHONIC button (44)
Produces a simulated surround effect.
4Numeric buttons (14, 22)
When the TV - DVD switch is set to DVD, these buttons
are used to select a disc and specify a title, chapter, track
number, as well as used to select a disc and enter a time
for the Time search function.
They are also used to select a disc number to be played
back in conjunction with the DISC SELECT button.
When the TV - DVD switch is set to TV, these buttons
are used to select a TV channel as well as mute the TV
audio.
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+
ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1 DISC SELECT button
2 REPEAT button
3 3D PHONIC button
4 Numeric buttons
5 ANGLE button
6 SUBTITLE button
7 DIGEST button
8 4/PREVIOUS button
9 7/CLEAR button
0 1/SLOW– button
- TITLE button
= CURSOR(5 Up, ∞ Down)
- CH(+/–) buttons
~ CHOICE button
! Infrared signal-emitting
window
@ TV STANDBY/ON button
% RETURN button
# TV - DVD switch
$ DVD STANDBY/ON button
^ TV/VIDEO - CANCEL button
&
VFP - PROGRESSIVE SCAN button
* AUDIO button
( ZOOM +/– buttons
) ¢/NEXT button
_ 8/STROBE button
¡ ¡/SLOW
+ button
+ 3/SELECT button
™ MENU button
£ ENTER button
¢ CURSOR (2 Left, 3 Right)
- VOL (+/–) buttons
ON SCREEN button
!
Preliminary knowledge
9
Preliminary
knowledge
English
5ANGLE button (40, 41, 45)
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles.
Also used to change the brightness of the display
window.
6SUBTITLE button (41)
Used to display the subtitle selection display on the
TV screen, as well as used to turn the subtitle on or off
(for DVD VIDEO).
7DIGEST button (33)
Displays beginning scenes of each title, chapter or
track on the TV screen (for DVD VIDEO/Video CD).
84/PREVIOUS button (27, 28, 31, 46)
Skips back a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
Holding down this button during playback reverses
playback rapidly (except MP3 disc).
97/CLEAR button (27, 36, 46)
Stops playback. Also used to clear all the programmed
selections for the program play.
01/SLOW– button (27, 35)
Pressing this button during playback reverses playback
rapidly (except MP3 disc).
Pressing this button while a DVD VIDEO disc is paused
reverses playback slowly.
-TITLE button (30)
Displays the title menu of a DVD VIDEO disc on the TV
screen.
=CURSOR (5 Up, ∞ Down) - CH (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR 5/∞” buttons in
this manual.
When the TV - DVD switch is set to TV, they are used
to select a TV channel.
~CHOICE button (49)
Brings up the preference on-screen display on the TV
screen.
!Infrared signal-emitting window (21)
Point this window toward the remote sensor on the
front panel when pressing buttons.
@TV STANDBY/ON button (22)
Turns the TV on or off (standby).
#TV - DVD switch (14, 23, 30)
When setting this switch to “TV”, the numeric, cursor
and TV/VIDEO - CANCEL buttons are used to control
your TV.
When setting it to “DVD”, these buttons are used to
control the unit.
$DVD STANDBY/ON button (24)
Turns the unit on or off (standby).
%RETURN button (31)
Returns to the previous menu (for Video CD).
^TV/VIDEO - CANCEL button (22, 36)
Switches the TV input mode when the TV - DVD switch
is set to TV.
Cancels the last selection of the program when the
TV - DVD switch is set to DVD.
&VFP - PROGRESSIVE SCAN button (17, 43)
Pressing this button brings up the VFP (Video Fine
Processor) window in which you can select or adjust the
picture character.
Holding down this button for a few seconds switches the
scan mode between the progressive scan and interlace
scan modes. See “How to make the Progressive scan
mode active” on page 17 for details.
*AUDIO button (42)
Selects the audio (for DVD VIDEO/Video CD).
(ZOOM +/– buttons (35)
Zooms in or out the picture (for DVD VIDEO/Video CD).
)¢/NEXT button (27, 28, 31, 46)
Skips forward a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
Holding down this button during playback advances
playback rapidly (except MP3 disc).
_8/STROBE button (27, 34, 46)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
Pressing this button while paused advances the still
picture frame-by-frame.
+3/SELECT button (26, 30)
Starts playback. Also used as a SELECT button for PBC
of Video CDs.
¡¡/SLOW+ button (27, 35)
Pressing this button during playback advances
playback rapidly (except MP3 disc).
Pressing this button while a DVD VIDEO or Video CD
disc is paused advances playback slowly.
•MENU button (30)
Displays a DVD menu on the TV screen.
£ENTER button
Executes the selected item in a menu or on-screen
display.
¢CURSOR (2 Left, 3 Right) - VOL (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR 2/3” buttons
in this manual.
When the TV - DVD switch is set to TV, they are used to
change the TV audio volume.
ON SCREEN button
Brings up an appropriate on-screen display for
controlling advanced functions for the current disc on
the TV screen.
% !
Preliminary knowledge
10
Preliminary
knowledge
Rear panel
1DIGITAL OUT jacks (COAXIAL/OPTICAL) (19)
Outputs digital audio signals. You must select the
signal type correctly according to the external device
connected to via the Preference display. Both the
COAXIAL and OPTICAL connectors are provided.
2VIDEO OUT - VIDEO jack (16)
Outputs a composite video signal.
3VIDEO OUT - COMPONENT jacks (Y/PB/PR) (17)
Output component video signals.
These jacks can output the Progressive scan signals as
well as the conventional Interlace scan signals.
See “How to make the Progressive scan mode active” on
page 17 for details.
4Region code label (15)
Indicates the region code of the unit.
5AUDIO OUT jacks (RIGHT/LEFT) (16, 17)
Outputs stereo analog audio signals.
6VIDEO OUT - S-VIDEO jack (16)
Outputs an S-video signal.
7AV COMPU LINK jacks (56)
Connects with other JVC equipment supporting the AV
Compulink function to facilitate integrated operations.
8AC IN connector (20)
Connects to the wall outlet using the supplied AC
power cord.
7 AV COMPU LINK jacks
8 AC IN connector
1 DIGITAL OUT jacks (COAXIAL/OPTICAL)
3 VIDEO OUT - COMPONENT jacks (Y/P
B
/P
R
)
5 AUDIO OUT jacks (RIGHT/LEFT)
2 VIDEO OUT - VIDEO jack
6 VIDEO OUT - S-VIDEO jack
4 Region code label
1
DIGITAL OUT VIDEO OUT AV COMPU LINK
AUDIO OUT
RIGHT COMPONENT
S-VIDEO
VIDEO
YP
B
P
R
PCM / STREAM
COAXIAL OPTICAL LEFT
AC IN
!
Preliminary knowledge
11
Preliminary
knowledge
English
Operational Principles
You can set preferences and perform advanced playback
functions via various on-screen displays, including the
Opening, Preference, Parental Lock and Control displays.
Basic operations of on-screen displays
•You can move using the CURSOR 5/∞/2/3buttons
to select items you want to work with.
•With an item like you can change the setting
by using the CURSOR 2/3buttons when is on
the item.
• - type item works when you place on the
item and press ENTER.
•In the message box, the operation to be performed is
displayed according to the item pointed by .
•Numbers are entered using the numeric buttons.
•Some functions become effective by pressing ENTER
after specifying necessary entries.
Opening display
An opening display appears automatically (without
pressing any button) in some conditions.
One of the displays shown on the right appears when a
disc is set and stopped. For a disc that does not contain
any picture (such as an Audio CD), the opening display
does not disappear after starting playback.
On-screen displays
1 / 3
REPEAT
(for Video CD)
(for DVD VIDEO)
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
ENTER
Numeric
buttons
CURSOR
5/∞/2/3
(for Audio CD)
!
Preliminary knowledge
12
Preliminary
knowledge
PREFERENCE (1, 2) displays (see page 49)
You can set preferences via these displays.
•To bring up the PREFERENCE 1/PREFERENCE 2
display
1When a DVD VIDEO disc is set and stopped or no
disc is inserted, press CHOICE.
2To select the display, move to the desired tab
using the CURSOR 2/3 buttons.
PARENTAL LOCK display (see page 53)
You can set the Parental Lock from this display.
•To bring up the PARENTAL LOCK display
When no disc is inserted or a DVD VIDEO disc is
stopped, press ENTER while holding down 7.
DVD VIDEO CONTROL display
You can select and set various functions for DVD VIDEO
playback from this display.
This display is available only during DVD VIDEO
playback.
•To bring up the DVD VIDEO CONTROL display
During DVD VIDEO playback, press ON SCREEN.
CD CONTROL display
You can select and set various functions for Audio CD
playback from this display.
•To bring up the CD CONTROL display
Whenever an Audio CD is inserted, press ON SCREEN.
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
OFF
SUBTITLE
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
(PREFERENCE 1)
4:3 LB
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo / Ro
COMPRESSION
AUTO STANDBY
ON
OFF
SCREEN SAVER
MODE 1
AV COMPULINK MODE
PRESS KEY
DVD1
(PREFERENCE 2)
PARENTAL LOCK
Country Code US
Set Level NONE
PASSWORD – – – –
EXIT
NEW PASSWORD? • • • PRESS 0~9 KEY
St. End
010 Mb
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
PRESS ENTER EXECUTE
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
TITLE REPEAT
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
St. End
010 Mb
Current relative
position of the
title
(St: start,End: end)
Current
title
number
Current
chapter
number
Elapsed time from
the beginning
of the current title
Transmission rate
TRACK 3 : 54TIME 1
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS ENTER = EXECUTE
REPEAT ALL
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
!
Preliminary knowledge
13
Preliminary
knowledge
English
VCD CONTROL display
There are two types of VCD CONTROL display. The
display shown on the right is available only during Video
CD playback.
When a Video CD disc is stopped, a display similar to the
CD CONTROL display appears.
•To bring up the VCD CONTROL display
Press ON SCREEN when a Video CD is inserted. The
appropriate display appears according to the unit's
status.
MP3 CONTROL display (See page 46)
The display shown on the right appears when an MP3
disc is set. You can select the desired Group or track to
be played back.
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
•Pressing any button on the unit or the remote control
unit will release the screen saver function and return to
the previous display.
•You can select one of several screen saver modes
available (see page 52).
•The screen saver function is not activated during
Audio CD/MP3 disc playback or after stopping Audio
CD/MP3 disc playback.
TRACK
TIME
3
4 : 58
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
AUDIO
ST
PRESS ENTER EXECUTE
St. End
010 Mb
REPEAT ALL
TRACK
TIME
3
4 : 58
St. End
010 Mb
Current relative
position of the
track
(St: start, End: end) Current track
number
Elapsed time from
the beginning of
the current track
Transmission rate
MP3 CONTROL
GROUP: /
To prevent the monitor from burning out [SCREEN SAVER]
DVD/Video CD/CD PLAYER
" !
Preliminary knowledge
14
Preliminary
knowledge
On-screen guide icons
During DVD VIDEO playback, you may see icons displayed over the picture. These have the
following meanings.
: Displayed at the beginning of a scene recorded from multiple angles.
(See page 40.)
: Displayed at the beginning of a scene recorded with multiple audio languages.
(See page 42.)
: Displayed at the beginning of a scene recorded with multiple subtitle languages.
(See page 41.)
You can set the unit not to display on-screen icons above via the preference settings
described on page 50.
About invalid operation icon
When you press a button, if the unit does not accept its operation, appears on your
television screen. Operations are occasionally unacceptable even if is not displayed.
Note that some operations may not be accepted. For example, some discs may not allow
rapid advance/reverse or slow-motion playback.
How to use numeric buttons
The function of the numeric buttons differs depending on the setting of the TV - DVD
switch. When setting it to TV, the buttons are used to select a TV channel (see page 22).
When setting it to DVD, the buttons are used to select a disc, select a track/title/chapter or
enter a disc time or chapter number.
To select a disc
Press the DISC SELECT button, followed by the appropriate numeric button (1 through 7)
within 5 seconds.
To select a track/title number
•To select a number between 1 and 10
Press the corresponding button for the number.
•To select a number higher than 10
Use the +10 button.
Examples:
To select 13 +10 → 3
To select 34 +10 → +10 → +10 → 4
To select 40 +10 → +10 → +10 → 10
To enter a time or chapter number
The method for entering a time for Time search or chapter number for Chapter search is
different from above. See the corresponding sections in this manual for the details.
* There is another method for selecting a Track or Group of an MP3 disc. See the
appropriate section.
To select a TV channel
Press the corresponding numeric buttons. See page 22 and 23 for details.
123
010
DISC
SELECT
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
RETURN
TV DVD
STANDBY/ON
Numeric buttons
DISC SELECT
TV DVD
TV DVD
!
Preliminary knowledge
15
Preliminary
knowledge
English
About discs
Playable and non-playable disc types are as follows:
Playable discs
The DVD VIDEO Logo is a trademark.
•CD-R and CD-RW discs recorded with the Audio CD format and CD-R discs recorded with the Audio CD, Video CD and
MP3 format can be played back, though some discs may not be played back because of the disc characteristics or
recording condition.
•DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This unit only can play back DVD
VIDEO discs whose Region Code numbers include “1”.
Examples of playable DVD VIDEO discs:
This unit accommodates both the NTSC and PAL system and can playback discs recorded with either system.
Note that a PAL video signal on a disc is converted to an NTSC signal and output.
•When playing back a “PAL” disc, the Progressive scan mode is never active even if you set the Progressive scan mode
to active.
Non-playable discs
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT
•Playing back discs listed as “Non-playable discs” above may generate noise and damage speakers.
•This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.
A DVD VIDEO disc is comprised of “titles”, while an Audio CD or Video CD is comprised of “tracks”. Each title may be
divided into some “chapters”. For example, if a DVD VIDEO disc contains some movies, each movie may have its own title
number, and each movie may be divided into some chapters. In a DVD VIDEO KARAOKE disc, each song usually has its
own title number and does not have chapters. In general, each title has independent content, while each chapter in the
same title has continuity.
(Example: DVD VIDEO disc)
(Example: Audio CD/Video CD)
Playable disc types
DVD VIDEO Video CD Audio CD
ALL 151 4
2
3
13
2
1
6
5
4
Disc structure
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Title 1 Title 2
Track 1 Track 2 Track 3 Track 4
# !
16
Getting started
Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
•Do not connect the AC power cord until all other connections have been made.
•Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT
jacks to your separate audio equipment. (See the following pages.)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
•If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable (optional) in addition to the (standard) video connection.
Before making any connections
To connect to a conventional TV
NOTES
•When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If
it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see “How to
make the Progressive scan mode active” on page 17.
•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See “AV COMPU LINK remote control
system” on page 56 for details.
Yellow
Audio/Video cable
(supplied)
White
Red
S-video cable
(not supplied)
Red
White Yellow
T V
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
The unit
DIGITAL OUT VIDEO OUT AV COMPU LINK
AUDIO OUT
RIGHT COMPONENT
S-VIDEO
VIDEO
YP
B
P
R
PCM / STREAM
COAXIAL OPTICAL LEFT
!
Getting started
17
Getting started
English
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks (Y, PB, PR) to the COMPONENT
VIDEO IN jacks (Y, PB, PR) of your TV with the video cables.
The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or
monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode
active.
How to make the Progressive scan mode active
Press and hold down the VFP - PROGRESSIVE SCAN button for a few seconds.
The scan mode switches between the Progressive scan and Interlace scan modes. When the Progressive scan mode is
selected, the PROGRESSIVE indicator on the front panel is lit in red. This indicator turns green during playback of a film-
source DVD VIDEO disc while the “PROGRESSIVE MODE” on the “PREFERENCE1” display is set to AUTO, FILM or
SMART (see page 51).
•You should note that not all Progressive TV and High-Definition TV sets are fully compatible with the unit and may
cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that you
switch the setting to the “Interlace Scan” output. If there are questions regarding our TV set compatibility with the unit,
please contact our customer service center.
•All JVC Progressive TV and High-Definition TV sets have no problem. (Example: AV-61S902)
To connect to a TV with the component video input jacks
Audio cable
(not supplied)
White
Red
Red White
The unit
Green Red
Blue
Component video cable
(supplied)
Green Red
Blue
T V
YP
B
P
R
IN
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
DIGITAL OUT VIDEO OUT AV COMPU LINK
AUDIO OUT
RIGHT COMPONENT
S-VIDEO
VIDEO
YP
B
P
R
PCM / STREAM
COAXIAL OPTICAL LEFT
VFP -
PROGRESSIVE
SCAN
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+
ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
PROGRESSIVE indicator
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
$ !
Getting started
18
Getting started
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
NOTES
•Connect “Y” to “Y”, “PB” to “PB”, “PR” to “PR” correctly.
•When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(optional).
•When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed the correct signals.
About SCAN MODE
To display video on the monitor (television) screen, the conventional scanning method is called “Interlaced scan”.
With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture
(frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing
all the even-numbered lines.
On the other hand, the Progressive scan system scans all horizontal lines at a time, so you can double the number of
pictures compared with the interlaced scan, resulting flicker-free, high-density picture.
To enjoy the progressive scanned video, a monitor (or TV or projector) to be connected to the unit must have the
Progressive inputs.
Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video
source (Note that some DVD VIDEO discs contain both film source and video source). Film sources are recorded as 24-
frame-per-second information, while (NTSC) video sources are recorded as 30-frame-per-second (60-field-per-second
interlaced) information.
When the unit plays back a film source material, uninterlaced progressive output signals are created using the original
information. When a video source material is played back, the unit interleaves lines between the interlaced lines on
each to create the pseudo uninterlaced picture and outputs as the progressive signal.
To connect to an audio amplifier or receiver
NOTE
•When using the unit with a stereo amplifier or receiver, make the “DOWN MIX” setting in “PREFERENCE 2” to “Lo/Ro”. (See
page 52.)
AUDIO
RIGHT
LEFT
IN
The unit
DIGITAL OUT VIDEO OUT AV COMPU LINK
AUDIO OUT
RIGHT COMPONENT
S-VIDEO
VIDEO
YP
B
P
R
PCM / STREAM
COAXIAL OPTICAL LEFT
Audio cable
(not supplied)
White
Red
White
Red Amplifier or receiver
!
Getting started
19
Getting started
English
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is
directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by
using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
To connect to audio equipment with a digital input
NOTES
•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT”
setting in the “PREFERENCE 2” on-screen display correctly according to the connected audio equipment. If the “DIGITAL
AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to them. See “DIGITAL
AUDIO OUTPUT” on page 51.
•With the digital connection, the “COMPRESSION” settings in the “PREFERENCE 2” on-screen display are invalid. Settings for
these items must be made from the decoder.
Digital equipment
Audio cable
(not supplied)
White
Red
The unit
White
Red
Coaxial digital cable
(not supplied)
Optical digital cable
(not supplied)
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the
cover with the plug and connect it to the jack inside
in the correct direction.
AUDIO
RIGHT
LEFT
IN
OPTICAL
COAXIAL
DIGITAL
IN
DIGITAL OUT VIDEO OUT AV COMPU LINK
AUDIO OUT
RIGHT COMPONENT
S-VIDEO
VIDEO
YP
B
P
R
PCM / STREAM
COAXIAL OPTICAL LEFT
% !
Getting started
20
Getting started
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY indicator lights and setup is completed.
Warning
•Disconnect the power cord if you are not going to use the unit for a long time.
•Disconnect the power cord before cleaning the unit.
•Disconnect the power cord before moving the unit.
•Do not connect or disconnect the power cord with wet hands.
•Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other
accidents.
Caution
•Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
•To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If the
cord is damaged, contact a dealer and get the new power cord.
•Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.
Using the remote control unit
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV.
The battery compartment is located on the back of the remote control unit.
1Press down on the point shown by the arrow at the top of the compartment cover,
and pull up the cover to open the compartment.
2Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control according
to the polarity markings (“+” and “–”) inside the compartment and on the batteries.
3Place the cover over the compartment, and press down lightly.
•The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace
the batteries. See next page for more information.
To connect the power cord
To install batteries in the remote control unit
!
Getting started
21
Getting started
English
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened,
they may burst or their contents may leak.
•Operate the remote control unit while pointing it toward the remote sensor on the unit.
•The remote control unit can be used within a range of about 5 meters from the remote sensor. If you operate the
remote control unit from a diagonal position, controllable distance may be shorter.
Precaution
•Remove the batteries from the remote control if it is not going to be used for a long period of time.
•Remove dead batteries and dispose of them properly.
•Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.
•Never touch liquid that has leaked out of a battery.
•Do not mix new and old batteries, or batteries of different types, when replacing them.
Remote sensor
NOTE
•If the remote sensor on the unit is exposed to the sunshine or strong light, you may not be able to control the unit from the
remote control unit.
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
Remote
sensor
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
!
Getting started
22
Getting started
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
1Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below by using the numeric buttons
(0 to 9).
Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.
Example:
To enter the manufacturer code “01”: Press “0” then “1”.
2Press 7 while holding down TV/VIDEO - CANCEL.
3Try to operate your TV by pressing TV STANDBY/ON .
If your TV turns on or off, you have successfully set the control signal.
Manufacturer code list
To use the remote control unit for TV operation
TV STANDBY/ON
TV/VIDEO - CANCEL
TV - DVD switch
DVD STANDBY/ON
Numeric buttons
button
7
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
No. Manufacturer No. Manufacturer No. Manufacturer
01 JVC 15 GRADIENTE 29 MIVAR
02 PHILIPS/CCE/MAGNAVOX 16 SANYO 30 FINLUX
03 MITSUBISHI 17 PHILCO/DAEWOO 31 NOKIA
04 PANASONIC 18 LG (GOLDSTAR) 32 FUNAI
05 RCA 19 GRUNDIG 33 SAMSUNG
06 SHARP 20 NEC/GRADIENTE 34 SAMSUNG/PEONY/CHANGHONG
07 SONY 21 PHILCO 35 SAMSUNG
08 TOSHIBA 22 BEIJING/NOBLEX 36 AIWA
09 ZENITH 23 JVC (ONWA) 37 DAEWOO
10 PHILCO/HITACHI 24 JVC (ONWA) 38 JINXING/PEONY
11 PANASONIC 25 JVC (ONWA) 39 PEONY
12 SAMSUNG 26 THOMSON 40 KONKA
13 SANYO/SEARS 27 FERGUSON 41 TCL
14 TOSHIBA 28 ITT
!
Getting started
23
Getting started
English
The following buttons can be used for operating the TV:
To use the CURSOR (CH–, CH+, VOL–, VOL+), TV/VIDEO - CANCEL and numeric buttons for TV control, set the
TV - DVD switch to “TV”.
Turns the TV on or off.
Switches the TV input mode between TV and VIDEO.
Selects the TV channels directly.
* For some TVs, pressing “+10” functions as the “100+,” while“10” functions as
the ENTER button if your TV requires pressing the ENTER button after selecting
a channel number.
Mutes the TV sound.
Changes the TV channels.
Adjusts the TV volume.
NOTES
•The remote control unit is initially set operating a JVC TV.
•If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
TV DVD
TV
TV/VIDEO
CANCEL
to
1
TV1
10
TV
-/--
0
TV0
+10
MUTING
CH+
CH
-
5
∞
VOL
+
VOL
-
5
5
" !
24
Basic operations
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press DVD STANDBY/ON on the remote control unit or press STANDBY/ON on the front panel.
The STANDBY/ON indicator, which illuminates in red during the standby mode, goes off, while each DISC indicator
(1 through 7) shows the current status of whether a disc is set or not in the corresponding tray.
•The first time you turn on the unit after connecting the power cord, the DISC indicators are illuminated until the unit detects that no
disc is set in the corresponding tray. Once detecting the status, the unit memorizes it unless you unplug the power cord, so the
DISC indicators show the status of corresponding trays correctly.
•You can directly turn on the unit by pressing the 3, DISC (1 through 7) or 0 (OPEN/CLOSE) button while the unit is on standby,
without pressing the DVD STANDBY/ON on the remote control unit or STANDBY/ON on the front panel. The behavior of the
unit after pressing these buttons while the unit is on standby is the same as pressing them while the power is on. See the following
description in which the unit is assumed that the power is on when starting operations.
Inserting and removing discs
Up to 7 discs can be set on the disc tray carousel.
1Press0 (OPEN/CLOSE) on the front panel.
The carousel opens and you can access to two of seven trays.
•From the second time on, the carousel opens with the previously played disc on the left-front tray.
DVD STANDBY/ON
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
RETURN
TV DVD
STANDBY/ON
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
NOTE
•Even if you press the DVD STANDBY/ON or STANDBY/ON button to turn off the unit, the unit is not disconnected from
the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit
consumes a very small amount of power.
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
EXCHANGE/ DISC SKIP button
0 (OPEN/CLOSE) button
4
5
!
Basic operations
25
Basic operations
English
2Press EXCHANGE/ DISC SKIP to select accessible trays if required.
Each press of the button rotates the carousel clockwise by an amount for accessing the next two trays.
3Place one or two discs in the tray(s).
4Repeat steps 2 and 3 if you wish to set one or more discs to other trays.
5Press 0 (OPEN/CLOSE).
The carousel closes.
The disc set in the front left tray when the carousel closes is loaded for playback. If no disc is set in the front left tray
when the carousel closes, the unit rotates the carousel clockwise until it finds a disc for loading. If no disc is set at
all in the carousel, “NO DISC” appears in the display window.
When a disc is loaded, the unit reads the information of the disc and the appropriate opening display according to
the disc type appears on the TV screen (see page 11).
NOTES
•Do not set a non-playable disc. For details about playable and non-playable disc types, see page 15.
•When placing a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.
•Do not use any stabilizer when playing back a disc.
•With most DVD VIDEO discs, the unit starts playback automatically after inserting the disc and pauses at the menu screen.
•If you insert a DVD VIDEO disc whose region code does not match the unit, “REGION CODE ERROR!” is shown in the DVD
opening display. For detail about the region code, see page 15.
5
6
STANDBY
STANDBY ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
8
7
OPEN/CLOSE
0
SKIP
¢
4
DISC 1DISC 2DISC 3DISC 4DISC 5DISC 6DISC 7
EXCHANGE
DISC SKIP
4
5
DVD/CD PLAYER
PLAY & EXCHANGE
7
-
DISC
To insert an 8-cm disc,
place it in the inner recess.
With the label side up
•
# !
Basic operations
26
Basic operations
Basic playback
Note that this section describes basic operations for playback of DVD VIDEO, Audio CD and Video CD discs. For MP3 disc
playback, see the independent chapter on and after page 46.
Press 3.
or
Press a desired DISC (1 through 7) button on the front panel, or press DISC SELECT followed by a
desired numeric (1 through 7) button on the remote control unit.
By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the
carousel (see the previous page for details about which disc is loaded for playback).
By the latter operation (using DISC, or DISC SELECT + numeric buttons), the unit starts playback from the disc set in
the specified tray. If no disc is set in the specified tray, the unit rotates the carousel clockwise until it finds a disc for
playback.
Regardless of operations for starting playback, the unit plays all available discs sequentially until you stop playback.
With some discs, which automatically goes to the menu screen and waits for the next instruction, the unit does not
move to the next disc.
About DISC indicators (1 through 7)
Each DISC indicator shows the current status of the corresponding tray as follows.
•Illuminates if a disc is set in the corresponding tray.
•Flashes when the corresponding disc is being played back.
•Unlit if no disc is set in the corresponding tray.
To start playback
NOTES
•Once a tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator lights
regardless of whether or not a disc is set.
•When the resume point is memorized, pressing 3 starts playback from that point instead of the beginning. See page 29.
•During playback, the display window shows the title/chapter or track number being played.
•With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting
playback. In such a case, select an item to be played back from the menu. Otherwise, the playback cannot go forward.
For operation using a menu, see page 30.
•When a DVD disc is set in the front left tray, the unit usually starts playback automatically after closing the carousel and reading
the disc contents.
Basic control buttons
STANDBY
STANDBY/ON
PROGRESSIVE
DVD / VIDEO CD / CD
PAUSE
PLAY
STOP
3
87
OPEN/CLOSE
0
SKIP ¢4
DVD/CD PLAYER
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7
PLAY & EXCHANGE
7
-
DISC
EXCHANGE
DISC SKIP
Basic
control
buttons
¶
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
!
Basic operations
27
Basic operations
English
Press
7
.
The unit stops playback.
•If you press 0 (OPEN/CLOSE) during playback, the unit stops playback and opens the tray carrousel.
Press 8.
The unit pauses playback. To resume playback, press 3.
.
¶During playback
Method 1 (from the remote control unit only)
Press 1 or ¡.
Each press of 1 or ¡ increases the playback speed. You can select the speed among 2x, 5x, 20x and 60x the
normal speed.
Pressing 3 returns the unit to normal playback.
Method 2
Hold down 4 or ¢.
Holding down ¢ advances playback rapidly, while holding down 4 reverses playback rapidly at 4 times the
normal speed. Releasing the button returns the unit to normal playback.
To stop playback completely
To stop playback temporarily
To advance or reverse playback rapidly while monitoring
$ !
Basic operations
28
Basic operations
¶During playback
Press 4 or ¢.
Press 4 to locate the beginning of the current chapter, title, or track, and press ¢ to locate the beginning of the
next chapter, title, or track.
You can open the carousel during playback and change discs that are not being played back.
¶During playback (with the carousel closed)
In this condition, you can see the EXCHANGE/ DISC SKIP indicator is illuminated in green.
1Press EXCHANGE/ DISC SKIP.
The carousel opens without interrupting playback, while the EXCHANGE/ DISC SKIP indicator goes off.
“EXCHANGE” is briefly shown in the display window.
2Set, remove or change discs in the accessible trays.
3To access to the other trays, press EXCHANGE/ DISC SKIP.
Each press of the button rotates the carousel, however, the tray corresponding to the disc being played back is
never accessible.
To locate the beginning of the scene or song
NOTE
•When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will
generally locate the beginning of the chapter, title or track.
Changing discs during playback [PLAY EXCHANGE]
NOTES
•During the steps 2 and 3 above, only the 7, 8, 4/¢, 1 and ¡ buttons are effective for the disc being played back.
•For details about functions of the EXCHANGE/ DISC SKIP button, see the appropriate section on page 25.
!
Basic operations
29
Basic operations
English
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
¶During playback
Press 7, or press DVD STANDBY/ON on the remote control unit or STANDBY/ON on the front
panel.
The unit memorizes the interrupted position.
“RESUME” appears in the display window for a few seconds.
•If you interrupt playback by pressing
7
and then turn off the power, the memory is not cleared.
¶While the disc you interrupt playback last time is still loaded in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
“RESUME PLAY” appears in the display window for a few seconds.
•To clear the resume position memory
Carry out one of the followings.
* Open the carousel.
*Press
7
while stopped.
* Press any of the DISC buttons (1 through 7) on the front panel, or the DISC SELECT button followed by any of the 1
through 7 numeric buttons.
To memorize the interrupted position
To resume playback
NOTES
•The resume function does not work with Audio CD and MP3 discs.
•In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the
resume point you stored.
% !
30
Advanced
operations
Advanced operations
•Note that this section describes operations for
playback of DVD VIDEO, Audio CD and Video CD discs.
For MP3 disc playback, see the independent chapter on
and after page 46.
•Make sure that the TV - DVD
switch is set to “DVD” when using
the CURSOR 5/∞/2/3, numeric
and TV/VIDEO - CANCEL buttons
for controlling the unit.
Playing from a specific
position on a disc
You can play a disc from the selected track, title or
chapter, or from the specified time.
DVD VIDEO discs generally have their own menus which
show the disc contents. These menus contain various
items such as titles of a movie, names of songs, or artist
information, and display them on the TV screen. You can
locate a desired scene by using the menu.
¶Whenever a DVD VIDEO disc is loaded
1Press TITLE or MENU.
The menu appears on the TV screen.
About menu
Normally, a DVD VIDEO disc
which contains more than
one title may have a “title”
menu which lists the titles. In
this case, the menu appears
on the TV screen by pressing
the TITLE button. Some DVD
VIDEO discs may also have a
different menu which
appears by pressing the
MENU button.
See the instructions of each DVD VIDEO disc for its particular
menu.
2Use CURSOR 5/∞/2/3 to select a desired
item, then press ENTER.
The unit starts playback of the selected item.
•With some discs, you can also select items by entering the
corresponding number using the numeric buttons, which
may cause the unit to automatically start playback.
Some Video CD discs supports the PBC function. PBC is
an abbreviation of “PlayBack Control.” A Video CD disc
recorded with PBC has its own menus, such as a list of
the songs of the disc. You can locate a specific scene by
using the menu.
¶When a Video CD disc with PBC is stopped
1Press 3.
A disc menu
appears on the TV
screen (The PBC
function is
activated).
“PBC” is indicated in the display window on the
front panel.
2Use the numeric buttons to select the desired
item.
•See page 14 for details about how to use the
numeric buttons.
To locate a desired scene from the DVD
menu
TV DVD
2
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
Example:
NOTES
•When appears on the TV screen by pressing TITLE in
step 1:
The disc does not have a menu listing the titles.
•When appears on the TV screen by pressing MENU
in step 1:
The disc does not have a menu.
•The MENU button does not work while stopped.
To locate a desired scene from the menu
of the Video CD with PBC
2
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
Example:
" !
Advanced operations
31
Advanced
operations
English
The unit starts playback of the selected item.
You can return to the menu by pressing the
RETURN button.
When “NEXT” or “PREVIOUS” appears on the TV
screen, the unit generally works as follows:
•Pressing ¢ advances to the next page.
•Pressing 4 returns to the previous page.
* The method of the operation is different
depending on the disc.
•To activate the PBC function when a PBC-compatible Video
CD disc is being played back without the PBC function,
press 7 then press 3.
•You can also activate the PBC function using the on screen
menu display as follows.
1 Press ON SCREEN.
2Use CURSOR 5/∞ to move to [PBC CALL], then press
ENTER.
•If you want to playback a PBC-compatible Video CD disc
without activating the PBC function, start playback by using
the numeric buttons instead of the 3. See the next
paragraph.
You can locate a desired title or chapter (DVD VIDEO) or
track (Audio CD/Video CD) by specifying the number.
.
¶For DVD VIDEO/Audio CD:
During playback or while stopped
For Video CD: During playback without PBC function
or while stopped
1Use the numeric buttons to specify the number.
* During DVD VIDEO playback (except when a
menu is shown), a chapter is specified.
* While a DVD VIDEO is stopped, a title is
specified.
* For an Audio CD or Video CD, a track is
specified.
The unit starts playback from the beginning of the
selection.
•See page 14 for details about how to use the
numeric buttons.
Depending on the disc type and the unit status,
what is specified differs.
* If a disc contains more than one title, a title is
specified. If a disc contains only one title, a chapter
is specified.
The selected title or track number appears in the
display window on the front panel.
You can locate the beginning of a chapter (for DVD
VIDEO) or track (for Audio CD/Video CD) by using the
4 or ¢.
¶For DVD VIDEO: During playback
For Audio CD: During playback or while stopped
For Video CD: During playback without PBC function
1Press 4 or ¢.
With an Audio CD or Video CD, pressing the button
skips a track. With a DVD VIDEO disc, pressing the
button skips a chapter or title depending on the disc
configuration.
The selection number appears in the display
window on the front panel.
To locate a desired selection using the
numeric buttons
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
Unit status Disc type What is
specified
While stopped
DVD VIDEO title or chapter(*)
Audio CD/ Video CD track
During playback
DVD VIDEO chapter
Audio CD/ Video CD track
NOTES
•During DVD VIDEO playback, if a menu is shown on the
TV screen, the numeric buttons may be used for
selecting an item in the menu.
•When appears on the TV screen:
The title or track you have selected is not contained in
the disc.
•This function does not work during Video CD playback
with PBC function.
To locate a desired selection using
4 or ¢
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
" !
Advanced operations
32
Advanced
operations
•To skip forward chapters/tracks, press ¢ as
many times as required.
•To skip to the beginning of the current track/
chapter, press 4 once.
•To skip back chapters/tracks, press 4 as many
times required.
If the current title of a DVD VIDEO disc being played is
divided into chapters, you can skip to a desired chapter
by specifying the chapter number using the on-screen
display.
¶During DVD VIDEO playback
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [CHAP.
SEARCH], then press ENTER.
“GO TO CHAPTER
=” appears in the
message area.
The color of [CHAP.
SEARCH] changes.
3Use the numeric buttons (0 to 9) to enter the
desired chapter number.
Example:
To select chapter number 8:
Press “8” → ENTER.
To select chapter number 37:
Press “3” → “7” → ENTER.
The specified number appears in the message area.
4Press ENTER.
The unit starts playback from the selected chapter.
•The “10” and “+10” buttons are not used in this function.
You can play a disc from the desired position by
specifying the elapsed time from the beginning of the
current title or track using the TIME SEARCH function.
Note that some DVD VIDEO discs do not contain time
information, and the TIME SEARCH function cannot be
used.
¶For DVD VIDEO: During playback
For Audio CD: During playback or while stopped
For Video CD: During playback without PBC function
or while stopped
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [TIME
SEARCH], then press ENTER.
“GO TO” appears in the message area.
The color of [TIME SEARCH] changes.
NOTES
•You can skip tracks within the current disc only.
•This function may not work with some DVD VIDEO
discs.
•This function does not work during Video CD playback
with PBC function.
To locate a desired scene by specifying
the chapter number [CHAP.SEARCH]
1
3
2
-2
, 4
2
-1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
GO TO CHAPTER=
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
St. End
010 Mb
Message area
NOTES
•You can also locate a desired chapter directly by
specifying the chapter number using the numeric
buttons during playback (except when a menu is
shown). See page 31.
•When the chapter number is incorrect in step 3:
Overwrite the incorrect number with the correct
number.
•When is displayed on the TV screen in step 4:
The chapter you have selected is not contained in the
disc, or chapter search does not work on the disc.
•To return to the regular display:
Press ON SCREEN.
To locate a desired position in the
current title or track [TIME SEARCH]
1
3
2
-2
, 4
2
-1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
" !
Advanced operations
33
Advanced
operations
English
3Use the numeric buttons (0 to 9) to enter the
time.
The specified time appears in the message area.
4Press ENTER.
The unit starts playback from the specified time.
•“10” and “+10” buttons
are not used with this
function.
•You can specify the time
in hour/minute/second
format for DVD VIDEO
discs, and in minute/
second format for Audio
and Video CD discs.
•Example (for DVD VIDEO)
To playback from 2(H):34(M):00(S)
You do not have to press “0” to enter the trailing zeros
(for the last two digits in the example above).
Of course, it is possible to enter them.
•When you make a mistake
Move the cursor to the incorrect value, then press the
correct button to re-select the value.
The unit can display the opening scene of each title or
chapter on a DVD VIDEO or each track of a Video CD. You
can select a desired scene from those displayed on the
TV screen.
¶For DVD VIDEO: While stopped or during playback
For Video CD: While stopped or during playback
without PBC function
1Press DIGEST.
Up to nine opening scenes are displayed.
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
GO TO 1 3 4: 00: ENTER
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
St. End
010 Mb
(for DVD VIDEO)
Selected time
Message area
TRACK 1 3 : 54TIME
MIN SEC
2 : 34
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
GO TO
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Audio CD)
Selected time
Message area
TRACK
TIME
3
34 : 58
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
AUDIO
L / R
GO TO 0 2 43: ENTER
St. End
010 Mb
(for Video CD)
Selected time
Message area
%%%%%
!%%%%
!"%%%
!"#%%
Press “2”.
Press “3”.
Press “4”.
→→→
Press ENTER
→
!"%%
!"%%%
!"#%%
Press CURSOR 2.
Press “4”.
→→
NOTES
•When appears on the TV screen in step 2:
The time you have selected is not contained on the disc,
or the Time search function does not work on the disc.
Also note that the Time search function does not work
during Video CD playback with the PBC function.
•To return to the regular display:
Press ON SCREEN.
•The TIME SEARCH function cannot be used during
program playback.
To locate a desired scene from the
display [DIGEST]
1
3
2
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
"" !
Advanced operations
34
Advanced
operations
•While a DVD VIDEO disc is stopped:
The opening scene of each title appears on the TV
screen.
•During DVD VIDEO disc playback:
The opening scene of each chapter in the current
title appears on the TV screen.
•When a Video CD disc is loaded:
The opening scene of each track appears on the
TV screen.
2Use CURSOR 5/∞/2/3 to move to select
the desired scene.
If there are more than 9 scenes, the digest screen
will have more than one page. In this case, pressing
¢ advances to the next page, while pressing
4 returns to the previous page.
•When the lower right scene is selected, pressing CURSOR
3 advances to the next page if available. Similarly, when
the upper left scene is selected, pressing CURSOR 2
returns to the previous page (if available).
•Depending on discs, it may take some time until all scenes
of the current page appear on the TV screen. If you want to
turn the page, you do not have to wait to press 4 or ¢
until all scenes appear.
3Press ENTER.
The unit starts playback from the selected scene.
Special picture playback
The unit provides special picture playback functions
including Frame-by-frame, Strobe, Slow-motion and Zoom.
¶ While paused (still)
1Press 8.
Each time you press 8, the still picture advances to
the next frame.
Pressing 3 returns to normal playback.
¶ During playback
1At the point you want to view as continuous
photographs, press 8.
The unit pauses playback.
2Press and hold 8 for more than 1 second.
Nine continuous still
pictures appear on the
TV screen.
NOTE
•With some discs, depending on the contents, it may
take some time until all the scenes appear on the
screen.
Selected scene
To advance a still picture
frame-by-frame
To display continuous still pictures
[STROBE]
1
SUBTITLEANGLE AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
4
¢
1
¡
5
5
5
∞
7
8
3
1, 2
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
" !
Advanced operations
35
Advanced
operations
English
•Pressing 8 when the nine still pictures are shown will
advance pictures frame by frame.
•To cancel strobe play
Press and hold 8 for more than 1 second.
¶During playback
1Press 8, then use 1/¡.
To play forward slow-motion, press ¡ , and to play
reverse slow-motion (for DVD VIDEO discs only),
press 1 . First, the unit plays the slowest speed,
and each time you press the button, the playback
speed increases.
•To return to normal playback
Press 3.
•To pause slow-motion playback
Press 8.
¶During playback or while paused
1Press ZOOM + or –.
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM –.
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
Each time you press ZOOM –, the magnification is
halved (down to x 1/8).
At the top-left of the screen, the information for the
current magnification appears, as well as the
zoomed-in position of the scene that can be moved
by operating the next step.
2Use CURSOR 5/∞/2/3 to move the zoomed
position.
•To return to normal playback
Press ENTER.
NOTES
•The sound is muted during STROBE playback.
•If you press and hold 8 for more than 1 second during
playback, nine still pictures also appear but they
advance in normal playback speed.
To playback in slow-motion
[SLOW]
NOTES
•The sound is muted during slow-motion playback.
•Reverse slow-motion playback is not possible for a
Video CD.
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
To zoom in/out [ZOOM]
NOTE
•While zoomed, the picture may look coarse.
1
2
123
56
89
0+1010
7
4
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
4
¢
1
¡
5
5
5
∞
7
8
3
ZOOM x 4
ZOOM x 4
"# !
Advanced operations
36
Advanced
operations
Changing the playback
order
You can play tracks on a Audio or Video CD disc currently
loaded in the desired order or in random order using the
Program or Random playback function.
Note that you cannot use these functions among
multiple discs.
You can play tracks on an Audio CD/Video CD disc in the
desired order by using the Program function.
¶While stopped
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to
[PROGRAM] and press ENTER.
The color of [PROGRAM] changes.
The program table appears on the on-screen
display (as shown above).
The “PROGRAM” indicator lights in the display
window on the front panel.
3Specify tracks on the disc loaded in the
desired order using the numeric buttons.
See page 14 for details about how to use the
numeric buttons.
Up to 24 tracks can be programmed. You may
select the same track more than once.
•If you specify a wrong selection
Press TV/VIDEO - CANCEL button. The last selection
programmed is erased.
•To clear the program
Press 7 .
4Press 3 to start program play.
When all of the programmed tracks have finished
playback, the unit stops but the program remains.
•To quit program playback
Press ENTER when points [PROGRAM].
[PROGRAM] returns to its original color.
(When playing back a Video CD, you have to press 7
and then press ON SCREEN to bring up the on-screen
display.)
•To clear the program
While stopped and the on-screen display is shown on
the TV screen, move to [PROGRAM] and then
press 7. All the programmed tracks are erased.
You can also clear the program by opening the
carousel or changing the current disc.
To playback in the desired order
[PROGRAM]
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
3
4
2-2
1
2-1
TRACK 1
PRESS NUMERIC KEY
3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Audio CD)
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS NUMERIC KEY
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Video CD)
NOTES
•You cannot use the program playback function among
discs set in the carousel. You can program only tracks
on the disc currently loaded.
•During program playback, pressing ¢ skip to the next
selection of the program. Pressing 4 returns to the
beginning of the current selection.
PRESS NUMERIC KEY
1 5 810
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
Selected track number
" !
Advanced operations
37
Advanced
operations
English
You can play tracks on an Audio CD or Video CD disc in
random order by using the Random function.
¶While stopped
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [RANDOM].
3Press ENTER.
The color of [RANDOM] changes.
The unit starts random playback.
The “RANDOM” indicator appears in the display
window on the front panel. After playing all tracks
of the disc loaded, random playback ends.
•The same track will not be played back more than once
during random play.
•During Audio CD playback, pressing ENTER when points
[RANDOM] quits random mode and continues playback in
the normal order.
•To quit random playback in the middle
Press 7. The unit stops playback and quits the
random playback mode.
You can also clear the random mode by opening the
carousel or changing the current disc.
Repeat playback
You can repeat playback of the current selection or all disc
contents on the disc currently loaded (except DVD VIDEO).
You can also repeat playback of a desired part.
Note that you cannot repeat playback of multiple discs.
Method 1
¶For DVD VIDEO: During playback
For Audio CD/Video CD: In any condition except
Video CD playback with PBC
1Press REPEAT.
Each time you press REPEAT, the repeat mode
toggles among All repeat, Repeat 1 and OFF.
You can see the selected mode by icons in the
display window on the front panel as below.
: Repeats the current title for DVD VIDEO or
the all tracks on the current disc for Audio
CD/Video CD.
: Repeats the current chapter for DVD
VIDEO or the current track for Audio
CD/Video CD.
No indication:The repeat mode is off.
To playback in random order
[RANDOM]
NOTE
•Random playback is carried out only within the disc
currently loaded.
1
23
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS ENTER = EXECUTE
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Video CD)
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
PRESS ENTER = EXECUTE
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Audio CD)
To repeat the current selection or all
tracks [REPEAT]
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1
VCD
VCD
VD
VD
TITLE TRACK CHAP
A
-
B1
PR
PR
OGRAM
OGRAM
RANDOM
RANDOM
Repeat mode
indicators
(Display window)
LPCM
MPEG
DOLBY
DIGITAL
DTS
8
3
"$ !
Advanced operations
38
Advanced
operations
Method 2
¶For DVD VIDEO: During playback
For Audio CD/Video CD: In any condition except
Video CD playback with PBC
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [REPEAT],
then press ENTER.
Each time you press ENTER, the repeat mode
changes as follows depending on the disc type and
unit’s status:
•During DVD VIDEO playback
•Audio CD/Video CD
The selected mode is also shown on the on-screen
display, however, it is shown in the different way
from the display window. The following table
shows the relation between them.
•To stop repeat playback
Press 7.
When a DVD VIDEO disc is set, the unit stops playback
and quits the repeat mode.
When an Audio CD or Video CD disc is set, the unit
stops playback but does not quit the repeat mode.
•To quit repeat playback
Perform one of the following:
* Press REPEAT until the repeat mode indicator
goes off in the display window.
* When points [REPEAT], press ENTER
repeatedly until [REPEAT] returns to its original
color.
You can also clear the repeat mode by opening the
carousel or changing the current disc.
1
2-2
2-1
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
4
¢
1
¡
5
5
5
∞
7
8
3
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
TITLE REPEAT
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
PRESS ENTER EXECUTE
St. End
010 Mb
Selected repeat mode
TITLE REPEAT
(current title repeat)
CHAPTER REPEAT
(current chapter repeat)
No indication (off)
TRACK
TIME
3
34 : 58
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
REPEAT ALL
AUDIO
L / R
PRESS ENTER EXECUTE
St. End
010 Mb
(for Video CD)
Selected repeat mode
TRACK 8 0 : 58TIME
MIN SEC
EACH
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
REPEAT ALL
(for Audio CD)
Selected repeat mode
REPEAT ALL
(repeats the all tracks
on the current disc)
REPEAT 1 (current track repeat)
No indication
(off)
Disc type On-screen display Display window
DVD VIDEO
TITLE REPEAT
CHAPTER REPEAT
Audio CD/
Video CD
REPEAT ALL
REPEAT 1
NOTES
•The repeat function can be applied only to the disc
currently being played back.
•When the program playback mode is active with an
Audio CD or Video CD, the repeat mode changes in the
same manner (i.e. toggles among REPEAT ALL, REPEAT
1 and no indication). Note that, however, in the
“REPEAT ALL” mode the unit repeats all the
programmed tracks, instead of all tracks on the disc.
•If appears when pressing ENTER in step 2 above
during DVD VIDEO playback
You cannot repeat the title or chapter because of the
disc contents.
•Repeat playback function cannot be used during Video
CD playback with PBC function.
•To turn off the on-screen display
Press ON SCREEN.
1
1
" !
Advanced operations
39
Advanced
operations
English
¶During playback
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [A-B
REPEAT], then press ENTER at the beginning
of the part you want to repeat (point A).
The color of [A-B REPEAT] changes.
3Press ENTER at the end of the part you want
to repeat (point B).
The unit locates “A” and starts repeat playback
between “A” and “B.”
•To quit A-B repeat playback
Press 7 . The unit stops playback and quits A-B repeat
mode.
You can also clear the A-B repeat mode by opening
the carousel or changing the current disc.
•During playback, pressing ENTER when is pointed at
[A-B REPEAT] quits A-B repeat mode and continues
playback.
•You can also quit A-B repeat mode by pressing 4 or ¢.
To repeat a desired part
[A-B REPEAT]
2
-2
, 3
1
2
-1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TRACK 8 0 : 58TIME
MIN SEC
MIN SEC MIN SEC
EACH
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
A 2 9 3 2 : B3 0 90:
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Audio CD)
Point A Point B
TITLE
TIME
3
CHAPTER
1
0 : 08 : 52
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
A 0 0 : 0 3 0 : B 0 0 : 8 2 5 :
St. End
010 Mb
(for DVD VIDEO)
Point A Point B
TRACK
TIME
3
35 : 22
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
AUDIO
L / R
A3 4 8 5 : B 3522:
St. End
010 Mb
Point A Point B
(for Video CD)
NOTES
•Points A and B must be specified on the same track or
chapter.
After specifying point A, if you do not specify point B
until the playback position moves to the next track/
chapter, the unit quits the A-B repeat mode and the
color of [A-B REPEAT] on the on-screen display returns
to its original color.
•To turn off on-screen display
Press ON SCREEN.
•If appears when pressing ENTER in step 2 during
DVD VIDEO playback
You cannot repeat the selected portion because of the
disc contents.
"% !
Advanced operations
40
Advanced
operations
Selecting a scene angle of
DVD VIDEO
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains “multi-angle” parts, where multiple cameras
were used to shoot the same scene from different angles.
•At the beginning of a “multi-angle” part, appears on the
TV screen.
From normal screen
¶During DVD VIDEO playback
1Press ANGLE.
The Angle selection
display appears on the
TV screen.
2Use ANGLE or CURSOR 2/3 to select the
desired angle.
Each time you press ANGLE or CURSOR 2/3, the
angle changes.
From on-screen display
¶During DVD VIDEO playback
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ or ANGLE to move to
[ANGLE].
3Use CURSOR 2/3 or ANGLE to select the
desired angle number.
To select a scene angle from the normal
screen [ANGLE]
1, 2
2
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1 / 3
1 / 3
2 / 3
3 / 3
Example:
NOTES
•The Angle selection display will automatically
disappear if you do not change the angle for several
seconds.
•To turn off the Angle selection display manually, press
ENTER.
•When appears on the TV screen
The current scene is not recorded from multiple angles.
NOTES
•To turn off the on-screen display
Press ON SCREEN.
•When appears on the TV screen
The current scene is not recorded from multiple angles.
2, 3
2
1
3
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLE
2 / 3
ANGLE
1 / 3
SELECT KEY
St. End
010 Mb
The total number of
recorded angles
The current
angle number
1 / 3
2 / 3
3 / 3
Example:
!
Advanced operations
41
Advanced
operations
English
¶During DVD VIDEO playback
1Press and hold ANGLE for more than 1
second.
Up to nine camera
angles recorded on
a disc appear on the
TV screen.
2Use CURSOR 5/∞/2/3 to select the desired
angle.
3Press ENTER or 3.
The unit starts playback by the selected angle on
the full-sized screen.
Changing the language and
sound
For DVD VIDEO discs, you can select the subtitle language,
as well as the audio language/sound included on a disc.
For Video CD discs, you can select the audio channel(s).
From normal screen
¶During DVD VIDEO playback
1Press SUBTITLE.
The Subtitle selection
display appears on
the TV screen.
2To turn the subtitle on and off, press
SUBTITLE.
3To select the desired subtitle language, use
CURSOR 2/3.
Each time you press
CURSOR 2/3, the
subtitle language
changes.
To select a scene angle from the angle
list display [ANGLE]
NOTES
•When appears on the TV screen in step 1:
The current scene is not recorded from multiple angles.
•During the operation above, audio is muted.
1
3
3
3
2
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
The selected camera angle
To select the subtitle language
[SUBTITLE]
1, 2
3
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1 / 3ON ENGLISH
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
-/3 (off)
Example:
!
Advanced operations
42
Advanced
operations
From on-screen display
¶During DVD VIDEO playback
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ or SUBTITLE to move
to [SUBTITLE].
3Use CURSOR 2/3 or SUBTITLE to select the
desired subtitle.
Each time you press CURSOR 2/3 or SUBTITLE,
the subtitle changes.
By AUDIO selection, you can choose the audio language of
movies or enjoy KARAOKE with or without the vocal.
From normal screen
¶During playback
1Press AUDIO.
The Audio selection display appears on the TV
screen.
2Use AUDIO or CURSOR 2/3 to select the
desired audio.
From on-screen display
¶During playback
1Press ON SCREEN.
The on-screen display appears on the TV screen.
NOTES
•For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Appendix A: Table of languages and
their abbreviations” at the end of this manual.
•The Subtitle selection display will automatically
disappear if you do not change the subtitle for several
seconds.
•To turn off the Subtitle selection display manually, press
ENTER.
•To turn off the on-screen display:
Press ON SCREEN.
•When appears on the TV screen:
You cannot select the subtitle.
2
2, 3
31
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLTE
2 / 3
ANGLE
1 / 3
SELECT KEY ENGLISH
St. End
010 Mb
Total number
Selected subtitle
number
Selected subtitle
To change the audio language or sound
[AUDIO]
1, 2
2
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1 / 3 ENGLISH
1
3
2
2, 3
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
!
Advanced operations
43
Advanced
operations
English
2Use CURSOR 5/∞ or AUDIO to move to
[AUDIO].
3Use CURSOR 2/3 or AUDIO for audio
selection.
Each time you press CURSOR 2/3 or AUDIO, the
audio changes.
See the following examples for audio selection.
•For DVD VIDEO
Each time you press CURSOR 2/3 or AUDIO, the
audio language or sound changes.
•For Video CD
Each time you press CURSOR 2/3 or AUDIO, the
playback audio changes as follows.
Miscellaneous functions
The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
¶During playback
1Press VFP - PROGRESSIVE SCAN to select the
desired preset.
Each time you press the button, the preset changes
as follows:
“NORMAL” and “CINEMA” are factory presets and
you cannot change parameters for them.
While selecting “USER 1” or “USER 2”, you can
adjust parameters that affect the picture character
and store the settings as the user preset. See the
step below.
2To define a user setting, select a parameter to
be edited using CURSOR 5/∞ from the
followings.
•BRIGHTNESS
Controls the brightness of the screen.
•CONTRAST
Controls the contrast of the screen.
•COLOR
Controls the color depth of the screen.
NOTES
•For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Appendix A: Table of languages and
their abbreviations” at the end of this manual.
•The Audio selection display will automatically
disappear if you do not change the audio for several
seconds.
•To turn off the Audio selection display manually, press
ENTER.
•To turn off the on-screen display:
Press ON SCREEN.
•When appears on the TV screen (for a DVD VIDEO
disc):
You cannot select the audio.
TITLE
TIME
3
CHAPTER
3
1 : 34 : 58
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLTE
2 / 3
ANGLE
1 / 3
SELECT KEY ENGLISH
St. End
010 Mb
(for DVD VIDEO)
TRACK
TIME
3
34 : 58
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
AUDIO
ST
PRESS ENTER EXECUTE
St. End
010 Mb
(for Video CD)
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
Example:
TITLE
TIME
3
CHAP.
3
1 : 34 : 58
CHAP.SEARCH
TIME SEARCH
A-B REPEAT
REPEAT
1 / 3
AUDIO
SUBTITLTE
2 / 3
ANGLE
1 / 3
SELECT KEY ENGLISH
St. End
010 Mb
Total number
Selected audio number
Selected audio language
ST (stereo)
R
L
TRACK
TIME
3
34 : 58
PBC CALL
TIME SEARCH
A-B REPEAT
REPEAT
AUDIO
ST
SELECT KEY
St. End
010 Mb
To adjust the picture character [VFP]
1
2
3
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
USER1
LH
CONTRAST
NORMAL CINEMA
USER2
Selected preset
Level
Parameter
NORMAL
CINEMA
USER 1
USER 2
" !
Advanced operations
44
Advanced
operations
•TINT
Controls the tint of the screen.
•SHARPNESS
Controls the sharpness of the screen.
•Y DELAY
Controls the color gap of the screen.
•GAMMA
Controls the brightness of neutral tints with
maintaining the brightness of dark and bright
portions.
3Adjust the level of the parameter using
CURSOR 2/3.
Moving the adjusting bar to the left reduces the
effect, while moving the bar to the right enhances
the effect.
•The VFP screen disappears if no operations are made for
more than 10 seconds. You can also turn off the VFP screen
manually by pressing ENTER.
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
¶During playback
1Press 3D PHONIC.
The 3D PHONIC display appears on the TV screen.
2Select the desired mode by using 3D PHONIC.
Each time you press the 3D PHONIC button, the 3D
PHONIC mode changes as follows:
•ACTION
Suitable for action movies and sports programs in
which sounds dynamically move.
•DRAMA
Natural and warm sound. You can enjoy movies in a
relaxed mood.
•THEATER
You can enjoy sound effects like in a major theater in
Hollywood.
3Press CURSOR 2/3 to adjust the effect level.
You can adjust the effect level in 5 steps.
Toward L: Reduces the effect.
Toward H: Enhances the effect.
•To turn off the 3D PHONIC screen, press ENTER. The 3D
PHONIC screen disappears if no operations are made for
more than 10 seconds.
NOTE
•The number of setting steps depends on parameters.
To simulate surround sound
[3D PHONIC]
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1, 2
3
NOTES
•The 3D PHONIC function works correctly only when
playing back a DVD VIDEO disc recorded with the Dolby
Digital. With other sources, you cannot get any effect if
you press the 3D PHONIC button.
•When playing back a DVD VIDEO disc recorded with the
Dolby Digital that does not contain the rear signal, you
cannot get a correct 3D PHONIC sound though you can
change the 3D PHONIC setting.
•The 3D PHONIC function does not affect the Dolby
Digital bitstream signal from the DIGITAL output jack.
•When you set the 3D PHONIC function is active, the
“DOWN MIX” and “COMPRESSION” setting in the
“PREFERENCE 2” display are disabled.
THEATER
3D PHONIC
LH
Selected effect mode
ACTION
DRAMA
THEATER
OFF
THEATER LH
3D PHONIC
Effect level
!
Advanced operations
45
Advanced
operations
English
You can choose the time display mode for an Audio CD
or Video CD disc in the display on the front panel and in
the on-screen display.
¶For Audio CD: During playback or while stopped
For Video CD: While stopped
1Press ON SCREEN.
The on-screen display appears on the TV screen.
2Use CURSOR 5/∞ to move to [TIME
SELECT].
3Press ENTER.
Each time you press ENTER, the time mode
changes as follows:
•During playback (for Audio CD)
•While stopped
•When you select “EACH REMAIN” while stopped, you can
change the track by pressing 4 or ¢.
You can dim the brightness of the display window.
¶When no disc is inserted
1Press CURSOR 5 or ∞ while holding down
ANGLE.
You can select the brightness of the display
window from among three levels.
To check the disc time [TIME SELECT]
1
23
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
TRACK 8 0 : 58TIME
MIN SEC
EACH
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Audio CD)
Time display
TRACK 1 3 : 54TIME
MIN SEC
EACH
REMAIN
RANDOM
PROGRAM
TIME SEARCH
A-B REPEAT
REPEAT
TIME SELECT
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
17 18 19 20 21 22 23 24
(for Video CD)
Time display
EACH REMAIN
(current track remaining time)
EACH
(current track elapsed time)
TOTAL
(disc elapsed time)
TOTAL REMAIN
(disc remaining time)
Changing the brightness of the display
window
EACH REMAIN
(recording time of the current track)
TOTAL REMAIN
(total time of the disc)
EACH (0:00)
TOTAL (0:00)
1
1
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
# !
46
MP3 disc
playback
MP3 disc playback
This unit can playback CD-R discs recorded by the MP3
format (we refer to those discs as MP3 discs in this
manual).
Though available functions with MP3 discs are limited,
operations for the available functions are similar to those
with Audio CD discs.
About MP3 disc
On an MP3 disc, each material (song) is recorded on a
Track (file). Tracks are usually grouped into a “Group”
(folder) by category, by artist, etc. In addition, Groups
can also be members of Groups (Groups' Group),
creating hierarchical Group layers. If you are familiar
with personal computers, you may easily understand the
hierarchical Group layer construction of MP3 discs
because it is similar to the folder layer construction of
computers.
This unit can handle up to 100 Tracks per Group, up to
100 Groups per Group layer and up to 10 Group layers. If
a disc has more Tracks, Groups or Group layers than the
above, the unit does not recognize those exceeding the
maximum numbers and cannot playback them.
Operations
The following table shows basic functions of basic
control buttons.
* You cannot skip a Track across a Group.
What is MP3?
MP3 is the abbreviation of “MPEG1 Audio Layer 3”.
MPEG Audio is a compression specification that
compresses the audio portion only. This image
compression method is used in DVD or Video CD, etc.
The audio data has been compressed into about 1/10.
NOTES for making a private MP3 disc
using a CD-R disc:
•Select “ISO 9660” as the disc format.
•Do not select the “multi-session” recording.
•Finalize the disc after completing recording.
NOTES
•The unit does not support “packet write” discs.
•Some disc may not be played back because of the disc
characteristics or recording condition.
•The unit does not output a digital audio signal from
DIGITAL OUT when playing back an MP3 disc.
•You cannot playback Tracks in the desired
(programmed) or random order.
•The screen saver function is not active with an MP3
disc, as with an Audio CD.
•The unit only can play back Tracks with any of the
following file extensions; “.MP3”, “.Mp3”, “.mp3” and
“.mP3”.
Group 1
Group 1’
Group 2
Track 1
up to 100 Tracks
per Group
up to 10 Group
layers
Basic operations
Buttons Functions
ENTER Starts playback
7Stops playback completely
8Pauses playback temporarily
4/¢Skips back or forward a Track in the
Group*
NOTES
•The current Track number is shown on the display
window in the following manner.
•Only MP3 files are shown on the display window as a
track.
•Group number is not shown in the display window.
•You cannot advance or reverse playback of an MP3 disc
rapidly.
•You cannot see any other time information but the
current track elapsed time.
Basic
control
buttons
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
VCDVD
TITLE TRACK CHAP
A
-
B1
PROGRAM
RANDOM
Current track elapsed time
Current track number
LPCM
MPEG
DOLBY
DIGITAL
DTS
8
3
!
MP3 disc playback
47
MP3 disc
playback
English
English
English
When loading an MP3 disc, after the disc contents are
read, the MP3 CONTROL display automatically appears
on the TV screen. You can specify the desired Group and
Track for playback via this display.
You can specify the desired Group/Track from the display
by the following procedure.
¶When the MP3 selection display is shown while
stopped
1Highlight a desired Group using CURSOR
5/∞.
2Press ENTER.
The highlighted Group is selected, and contents of
the Group is shown.
•If tracks in the selected Group are shown, go to
the next step.
•If there are one or more Groups in the selected
Group, repeat steps 1 and 2 until tracks in the
selected Group are shown.
3Highlight a desired Track using CURSOR
5/∞.
4Press ENTER.
The unit starts playback from the specified Track.
During playback, the bottom row of the display
shows something like below.
Specifying the desired Group
and Track
MP3 CONTROL
GROUP: /
1, 3
2, 4
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
MP3 CONTROL
GROUP:
UB40
/
01- One In Ten.mp3
03- Kingston Town.mp3
02- Red Red Wine.mp3
04- Higher Ground.mp3
05- King.mp3
06- Cherty oh Baby.mp3
07- I Got You Babe.mp3
Selected Group Selected Track
NOTES
•If a MP3 file name includes any 2-byte character, the unit
may not show the file name correctly.
•You can select (highlight) a track which does not belong
to any Group (if there is any). In this case, pressing
ENTER immediately starts playback.
•Pressing the CURSOR 2 button returns to the higher
hierarchical layer of Groups.
•Only MP3 files are shown on the MP3 CONTROL display.
•The order of Groups/Tracks shown in the MP3
CONTROL display may differ from the order shown on
your personal computer when you set the disc on your
computer.
$%&''!' !" #
Tra ck time
The number of tracks in the
current group
Current track number
$ !
MP3 disc playback
48
MP3 disc
playback
You can repeat playback of the current track or group.
¶During playback or while stopped
1Press REPEAT.
Each time you press REPEAT, the repeat mode
toggles among current group repeat, current track
repeat and off.
You can see the selected mode by icons in the
display window on the front panel as below.
: Repeats the current group on the
disc.
: Repeats the current track.
No indication: The repeat mode is off.
•To stop repeat playback
Press 7 .
•To quit repeat playback
Press REPEAT as many times until no repeat icon is
shown on the display window.
Repeat playback
NOTE
•You cannot repeat all contents on the disc.
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
1
1
!
49
Initial settings
English
Initial settings
Selecting preferences
You can set various preferences for playback via two
preference displays.
You can bring up a preference display at any time except
the unit is turned off.
¶In any condition except the unit is turned off.
1Press CHOICE.
One of the Preference on-screen displays appears
on the TV monitor.
You can see two tabs for the displays
(PREFERENCE 1 and PREFERENCE 2) at the top.
2Select the appropriate tab using CURSOR
2/3 when points either one of the tabs.
3Move to select the item you want to edit by
using CURSOR 5/∞
4Press CURSOR 2/3 to select from options.
•For details about each setting, see the following
paragraphs:
The “PREFERENCE 1” display handles preferences
related to language and display.
MENU LANGUAGE
You can select the default “display” language to be
displayed if it is contained on a DVD VIDEO disc.
Each time you press
CURSOR 3, the language
setting changes in the
following order:
ENGLISH →
→→
→ SPANISH →
→→
→ FRENCH →
→→
→ CHINESE →
→→
→
GERMAN →
→→
→ ITALIAN →
→→
→ JAPANESE →
→→
→ language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default display language will be displayed.
AUDIO LANGUAGE
You can select the default audio language to be played if
it is contained on a DVD VIDEO disc.
Each time you press
CURSOR 3, the language
setting changes in the
following order:
ENGLISH →
→→
→ SPANISH →
→→
→ FRENCH →
→→
→ CHINESE →
→→
→
GERMAN →
→→
→ ITALIAN →
→→
→ JAPANESE →
→→
→ language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default audio language will be played.
How to set preferences
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
2
13
, 4
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo / Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD1
PREFERENCE 2
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
OFF
SUBTITLE
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
PREFERENCE 1
4:3 LB
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
Selected item
4:3 LB
NOTES
•To returns the normal screen:
Press CHOICE.
•If you bring up a PREFERENCE display during DVD
VIDEO/Video CD playback, the unit memorizes the
current playback position, and resumes playback from
that position later when dismissing the PREFERENCE
display.
Language and display preference
4:3 LB
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
Selected language
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
Selected language
4:3 LB
% !
Initial settings
50
Initial settings
SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on a DVD VIDEO disc.
Each time you press
CURSOR 3, the language
setting changes in the
following order:
OFF →
→→
→ ENGLISH →
→→
→ SPANISH →
→→
→ FRENCH →
→→
→ CHINESE →
→→
→
GERMAN →
→→
→ ITALIAN →
→→
→ JAPANESE →
→→
→ language code
from AA to ZU
(See “Appendix A: Table of languages and their
abbreviations” at the end of this manual.)
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
* If the selected language is not recorded, the disc’s
default subtitle language will be displayed.
ON SCREEN LANGUAGE
You can select the on-screen display language of the
unit.
Each time you press
CURSOR 3, the language
setting changes as follows:
Pressing CURSOR 2 changes the language setting in the
reverse order of the above.
ON SCREEN GUIDE
The unit can display “on-
screen guide” icons or
characters on the picture,
which show what is
happening to the disc or the
unit.
Examples of “on-screen guide” icons or characters:
, ,
•ON
The on-screen guide will be displayed.
•OFF
The on-screen guide will not be displayed.
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
•4:3 LB. (Letter Box Conversion)
Should be selected when you
connect a normal TV to the
unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
•4:3 PS. (Pan Scan Conversion)
Should be selected when you
connect a normal TV to the
unit.
When you play a wide picture
recorded on a DVD VIDEO
disc, a portion of the picture is
automatically cut off from the
left and right sides of the image.
Depending on the disc, it may not be possible to
playback in this mode. In that case, the picture is
played back as in 4:3 LB. mode.
•16:9 AUTO (Wide Television screen)
Should be selected
when you connect a
wide-screen TV to the
unit.
•16:9 NORMAL (Wide Television screen)
Should be selected when you connect the unit to a
wide-screen TV whose aspect ratio is fixed to 16:9 (the
unit automatically adjusts the screen width of the
output signal correctly when playing back a “4:3”
source).
4:3 LB
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
Selected language
4:3 LB
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
Selected language
ON SCREEN LANGUAGE
ENGLISH
IDIOMA EN PANTALLA
FRANCAIS
Spanish
English
French
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
4:3 LB
NOTES
•If a disc does not support “4:3 Pan Scan”, the letter box
screen appears even if you set the MONITOR TYPE to
“4:3 PS. ”.
•If you playback a “4:3” DVD VIDEO source with the
“16:9 NORMAL” mode, the picture character slightly
changes due to the process for converting the picture
width.
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
4:3 LB
# !
Initial settings
51
Initial settings
English
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
•AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
•VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
•VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
•FILM
Suitable for playing back a film or progressive source
disc.
•SMART
Used to playback a disc containing both video and
film source materials.
* Normally, set the PROGRESSIVE MODE to “AUTO”.
* Some DVD VIDEO discs may not be played back
correctly with the “AUTO” mode. If the playback
picture is unclear or noisy with a particular DVD
VIDEO disc, try to change the mode.
The “PREFERENCE 2” display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
•PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
•STREAM/PCM
Should be selected when you connect with the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.
•DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
NOTE
•When playing back a film-source DVD VIDEO disc with
the “PROGRESSIVE MODE” set to “FILM”, “SMART” or
“AUTO” and the progressive scan mode is active, the
PROGRESSIVE indicator on the front panel lights in
green. (See page 17.)
Audio and system preference
PREFERENCE2PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
PRESS KEY
PROGRESSIVE MODE
AUTO
4:3 LB
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD 1
Playback discs
Output
STREAM/
PCM
DOLBY
DIGITAL/
PCM
PCM ONLY
DVD with 48/44.1
kHz, 16 bit linear
PCM
48/44.1 kHz,
16 bit, stereo
linear PCM
++
DVD with 48/44.1
kHz, 20/24 bit
linear PCM
48/44.1 kHz,
16 bit, stereo
linear PCM*
++
DVD with 96/88.2
kHz, linear PCM
No output ++
DVD with DTS DTS bitstream 48 kHz, 16 bit,
stereo linear
PCM*
+
DVD with Dolby
Digital
Dolby Digital
bitstream +
48 kHz, 16 bit,
stereo linear
PCM*
Video CD 44.1 kHz,
16 bit, stereo
linear PCM
++
Audio CD 44.1 kHz,16
bit,
stereo linear
PCM
++
Audio CD with DTS
DTS bitstream 44.1 kHz,
16 bit, stereo
linear PCM
+
CD -R with MP3
No output ++
NOTES
•The unit does not provide the DTS decoding function.
•When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
# !
Initial settings
52
Initial settings
DOWN MIX
To playback a DVD VIDEO
disc recorded with
surround multichannel
audio correctly, the DOWN
MIX setting must be
properly made according to
your audio system.
Note that this setting affects
only the output signal from the ANALOG AUDIO output
jacks when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
•Lt/Rt
Should be selected when you enjoy multichannel
surround audio by connecting the unit’s ANALOG
AUDIO output to a surround decoder.
•L0/R0
Should be selected when you enjoy conventional 2-
channel stereo audio by connecting the unit’s AUDIO
output to a stereo amplifier/receiver or television set,
or when you duplicate audio of a DVD VIDEO disc
recorded with surround audio to your MD, cassette,
etc.
COMPRESSION
The compression function
suppresses the dynamic
range of 2-channel audio
output signals. This function
is always active when
playing back a 5.1-channel
source.
•ON
The compression function is always active regardless
of sources.
•OFF
The compression function is inactive when playing
back a one- or two-channel source.
AUTO STANDBY
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters
standby mode automatically.
•60
Time is set to 60 minutes.
•30
Time is set to 30 minutes.
•OFF
The auto standby function is off.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
•MODE 1
The current picture gets
dark.
•MODE 2
The “screen saver” picture
appears and its brightness
changes.
•OFF
The screen saver function is off.
AV COMPULINK MODE
If you use the AV COMPU
LINK system, you must set
this item correctly.
Select from the three options:
“DVD1”, “DVD2” and “DVD3”
according to the equipment to
be connected.
See page 56.
NOTE
•The Down mix function does not work when the 3D
PHONIC function is activated.
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD1
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD 1
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX Lo/Ro
COMPRESSION ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD1
NOTE
•The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
•When a static picture is displayed for a long time
during playback, the screen saver function is always
activated in “MODE 1” regardless of whether you select
“MODE 1” or “MODE 2”.
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD1
PREFERENCE2PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
PRESS KEY
MODE 1
AV COMPULINK MODE
DVD1
# !
Initial settings
53
Initial settings
English
Limiting playback by
children
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according to the
level set by the user. For example, if a movie which
includes violent scenes supports the parental lock
feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
¶While a DVD VIDEO disc is stopped or no disc is inserted
1Press ENTER while holding down 7 on the
remote control unit.
The Parental Lock on-screen display appears on the
TV screen.
points [Country Code].
2While points [Country Code], use
CURSOR 2/3 to select the “US” for country
code.
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See “Appendix B: Country code list for Parental
Locks”.
3Press ENTER.
moves to [Set Level].
4While points [Set Level], use CURSOR
2/3 to select the Parental Lock level.
Each time you press CURSOR 2/3, the Parental
level changes as follows:
•“LEVEL1” is the strictest level. “NONE” means no
restriction. Discs rated higher than the selected level are
restricted.
5Press ENTER.
moves to [PASSWORD].
6Enter your 4-digit password using the numeric
buttons (0 to 9).
7Press ENTER.
The Parental level and password are set.
moves to [EXIT].
Pressing ENTER again returns to the opening
display.
•If you enter an undesired password in step 6 above, reenter
the password before pressing ENTER.
To set Parental Lock for the first time
[PARENTAL LOCK]
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
6
1, 3, 5, 7
2, 4
1
PARENTAL LOCK
Country Code US
Set Level NONE
PASSWORD – – – –
EXIT
PRESS KEY ENTER
PARENTAL LOCK
Country Code US
Set Level LEVEL 1
PASSWORD – – – –
EXIT
PRESS KEY ENTER
NONE
LEVEL 1
LEVEL 8
•
•
•
PARENTAL LOCK
Country Code US
Set Level LEVEL 1
PASSWORD – – – –
EXIT
NEW PASSWORD? • • • PRESS 0~9 KEY
#" !
Initial settings
54
Initial settings
You can change the Parental Lock settings later.
¶While a DVD VIDEO disc is stopped or no disc is inserted
1Press ENTER while holding down 7 on the
remote control unit.
The Parental Lock on-
screen display appears
on the TV screen.
points [PASSWORD].
2Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct
password.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen, and you
cannot go to the next step.
3To change the country code, use CURSOR
2/3 to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
4To change the set level, use CURSOR 2/3 to
select the desired level while points [Set
Level], and then press ENTER.
moves to [PASSWORD].
5Enter the password using the numeric buttons
(0 to 9) and press ENTER.
moves to [EXIT].
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening display.
To change the settings
[PARENTAL LOCK]
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
2-1, 5-1
1, 2-2, 3-2,
4-2, 5-2
1
3-1, 4-1
PARENTAL LOCK
Country Code US
Set Level LEVEL 1
PASSWORD – – – –
EXIT
CURRENT PASSWORD? • • • PRESS 0~9 KEY
NOTES
•When you enter the wrong password more than 3 times
in step 2 above, moves to [EXIT] automatically and
CURSOR 5/∞does not work.
•If you forget your password in step 2
Enter “8888.”
# !
Initial settings
55
Initial settings
English
When you set the Parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the Parental Lock to be temporarily released or
not.
1Use the C
URSOR
5
/
∞
to move to [YES],
then
press ENTER.
moves to the
[PASSWORD].
When selecting [NO],
press 0 (OPEN/CLOSE)
button on the front
panel to remove the
disc.
2Enter your 4-digit password using the numeric
buttons (0 to 9).
The Parental Lock is released, and the unit starts
playback.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen.
Enter the correct password.
To temporarily release the Parental
Lock [PARENTAL LOCK]
NOTE
•When you enter the wrong password more than 3 times
in step 2 above, moves to [NO] automatically and
CURSOR 5/∞do not work.
DISC
SELECT
TV DVD
REPEAT
123
56
89
0+1010
7
4
3D
PHONIC TV/VIDEO
CANCEL
SUBTITLEANGLE
TV1 TV2 TV3
TV4 TV5 TV6
TV7 TV8 TV9
TV
-/-- TV0 MUTING
AUDIO VFP
PROGRESSIVE
SCAN
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
-
TITLE
MENU
CHOICE
ENTER
REMOTE CONTROL
CH+
SELECT
CH
-
VOL
+
VOL
-
ON SCREEN
+ZOOM
-
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
TV DVD
STANDBY/ON
2
1
-2
1
-1
PARENTAL LOCK
Temporary
Level Change ?
This DISC can’t play now!
PASSWORD
YES
NO
– – – –
PRESS ENTER EXECUTE
## !
56
Additional
information
Additional information
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest
operation.
If your video/audio player (such as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV
COMPU LINK cable(s), when you simply starting the player, all the necessary settings of
the television and/or amplifier/receiver for enjoying playback are automatically performed.
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
•If you connect a DVD player to a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as
follows.
•When connecting to VIDEO-1 input terminal of the television: DVD2
•When connecting to VIDEO-2 input terminal of the television: DVD3
•If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and DVD
player’s AV COMPU LINK setting as follows.
•When connecting to VIDEO-1 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
•When connecting to VIDEO-2 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
•If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU LINK
setting to DVD1.
•The DVD player’s AV COMPU LINK setting is operated in the PREFERENCE 2 display.
See page 52 for operation.
•For information on the connection between the TV and the Receiver, refer to the Receiver’s Instructions.
NOTE
•The cable for connecting between the AV COMPU LINK jacks is not supplied with the unit. Purchase an optional audio cable
with monaural mini-plugs on both ends for AV COMPU LINK connection.
Connection and setup
To AV COMPU LINK (II or EX)
DVD player
TV
To AV COMPU LINK (II or EX)
To AV COMPU LINK
TV
DVD player VCR (Video Cassette Recorder)
To AV COMPU LINK (II or EX)
TV
Receiver DVD player
# !
Additional information
57
Additional
information
English
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1Turn on the main power of the television.
2Insert a disc (or tape) into the source component.
3Press 3 of the source component.
The following actions are performed automatically:
•Turning on the power for the television.
•Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
•Turning on the power for the receiver.
•Setting the source of the receiver to the component which has started playback.
IMPORTANT!
You connect the component video output to your TV:
•Set the DVD player’s AV COMPU LINK setting to DVD1.
•Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
not make the S-VIDEO connection.
Notes for connection
•If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions
may not be performed automatically.
•The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II” with the AV
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
•Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the
system will not work correctly.
•There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indicating “II” or “EX” can be connected to a DVD player.
Operation
#$ !
Additional information
58
Additional
information
Care and handling of discs
How to handle discs
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a
disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may
cause the player to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesive on its surface.
Storage
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they
can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the
humidity or temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any
anti-static agents.
CAUTION
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to
industry standards.)
These symptoms are caused by the discs, not by the malfunction of the unit.
# !
Additional information
59
Additional
information
English
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting
service.
Symptom Possible case Remedy
Power does not come on. Power plug is not inserted securely. Plug in securely.
Remote control does not work.
Too far from the unit. More closer to the unit.
The tip of the remote unit is not pointed in
the right direction.
Point the infrared light- emitting window
toward the remote sensor on the front panel.
Batteries are exhausted. Replace the batteries with new ones.
Battery polarity is incorrect. Take out the batteries and insert them again in
the correct direction.
The TV/VIDEO - CANCEL, CURSOR or
numeric buttons do not work. The TV - DVD switch is not correctly set.
To control the unit, set the TV - DVD switch to
“DVD”. To control your TV, set the TV - DVD
switch to “TV”.
No picture is displayed on the
monitor.
Connection of video cable is incorrect. Connect the cable correctly.
Input selection of TV is incorrect. Select correctly.
Disc is not playable. Use a playable disc. (See page 15.)
The Progressive scan mode is set to ON
though the unit is connected to a TV via
the VIDEO OUT jack.
Set the Progressive scan mode to OFF. (See
page 17.)
Picture is noisy or blurred.
The unit is connected to a VCR directly
and the copyguard function is activated.
Connect the unit so that the picture signal
flows directly to the TV.
With some discs, a picture may be blurred
when setting the “PROGRESSIVE MODE”
to “FILM” or “
AUTO”
.
Set the “PROGRESSIVE MODE” to “VIDEO“
.
No audio is reproduced.
Connection is incorrect. Check the connections.
Input selection of amplifier is incorrect. Select correctly.
No audio is reproduced when playing
back a DVD disc recorded with 88.2
kHz or more, linear PCM audio using
the DIGITAL OUT jack.
The audio signal is not derived from the
unit's DIGITAL OUT.
Use the AUDIO OUT when playing back such
discs.
Sound is distorted or noise is
generated. Disc is dirty. Wipe the disc surface.
Picture does not fit the television
screen.
MONITOR TYPE is not correctly set. Select monitor type correctly. (See page 50.)
Television is not correctly set. Set the television correctly.
Operation is not possible.
Microcomputer malfunction due to
lightning or static electricity.
Turn off the power and unplug the power
cord, then connect the power cord again.
Moisture condensation caused by a
sudden change of temperature or
humidity.
Turn off the power, then turn it on a few hours
later.
The carousel does not move.
The system malfunctions.
An alien substance is jammed on the
carousel.
Press the STOP button or turn off the power.
#% !
Additional information
60
Additional
information
Specifications
General
Readable discs: DVD VIDEO, Audio CD, Video CD
Video format: NTSC, 525i/525p selectable
Other
Power requirements: AC 120 V , 60 Hz
Power consumption: 18 W (POWER ON), 2.7 W (STANDBY mode)
Mass: 5.6 kg (12.4 lbs)
Dimensions (W x H x D): 435 mm x 102 mm x 448 mm
(17-3/16 inch x 4-1/16 inch x 17-11/16 inch)
Video outputs
COMPONENT (pin jacks): Y Output: 1.0 Vp-p (75 Ω)
PB/PR Output: 0.7 Vp-p (75 Ω)
VIDEO OUT (pin jack): 1.0 Vp-p (75 Ω)
S-VIDEO OUT (S jack): Y Output: 1.0 Vp-p (75 Ω)
C Output: 286 mVp-p (75 Ω)
Horizontal resolution: 500 Lines or more
Audio outputs
ANALOG OUT (pin jack): 2.0 Vrms (10 kΩ)
DIGITAL OUT: (COAXIAL): 0.5 Vp-p (75 Ω termination)
(OPTICAL): –21 dBm to –15 dBm (Peak)
Audio characteristics
Frequency response: CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz): 2 Hz to 22 kHz
(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)
DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz
Dynamic range: 16 bit: More than 98 dB
20 bit: More than 106 dB
24 bit: More than 106 dB
Wow and flutter: Unmeasurable (less than ± 0.002%)
Total harmonic distortion: less than 0.002%
* Specifications and appearance subject to change without prior notice.
!
Additional information
61
Additional
information
English
Appendix A:Table of languages and their abbreviations
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select
the desired language, select the abbreviation corresponding the language you want to.
AA Afar IK Inupiak RN Kirundi
AB Abkhazian IN Indonesian RO Rumanian
AF Afrikaans IS Icelandic RU Russian
AM Ameharic IW Hebrew RW Kinyarwanda
AR Arabic JI Yiddish SA Sanskrit
AS Assamese JW Javanese SD Sindhi
AY Aymara KA Georgian SG Sangho
AZ Azerbaijani KK Kazakh SH Serbo-Croatian
BA Bashkir KL Greenlandic SI Singhalese
BE Byelorussian KM Cambodian SK Slovak
BG Bulgarian KN Kannada SL Slovenian
BH Bihari KO Korean (KOR) SM Samoan
BI Bislama KS Kashmiri SN Shona
BN Bengali, Bangla KU Kurdish SO Somali
BO Tibetan KY Kirghiz SQ Albanian
BR Breton LA Latin SR Serbian
CA Catalan LN Lingala SS Siswati
CO Corsican LO Laothian ST Sesotho
CS Czech LT Lithuanian SU Sundanese
CY Welsh LV Latvian, Lettish SV Swedish
DA Danish MG Malagasy SW Swahili
DZ Bhutani MI Maori TA Tamil
EL Greek MK Macedonian TE Telugu
EO Esperanto ML Malayalam TG Tajik
ET Estonian MN Mongolian TH Thai
EU Basque MO Moldavian TI Tigrinya
FA Persian MR Marathi TK Turkmen
FI Finnish MS Malay (MAY) TL Tagalog
FJ Fiji MT Maltese TN Setswana
FO Faroese MY Burmese TO Tonga
FY Frisian NA Nauru TR Turkish
GA Irish NE Nepali TS Tsonga
GD Scots Gaelic NL Dutch TT Tatar
GL Galician NO Norwegian TW Twi
GN Guarani OC Occitan UK Ukrainian
GU Gujarati OM (Afan) Oromo UR Urdu
HA Hausa OR Oriya UZ Uzbek
HI Hindi PA Panjabi VI Vietnamese
HR Croatian PL Polish VO Volapuk
HU Hungarian PS Pashto, Pushto WO Wolof
HY Armenian PT Portuguese XH Xhosa
IA Interlingua QU Quechua YO Yoruba
IE Interlingue RM Rhaeto-Romance ZU Zulu
!
Additional information
62
Additional
information
Appendix B:Country code list for Parental Locks
This list is used for the Parental Lock operation. For details, see page 53.
AD Andorra
AE United Arab Emirates
AF Afghanistan
AG Antigua and Barbuda
AI Anguilla
AL Albania
AM Armenia
AN Netherlands Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
AU Australia
AW Aruba
AZ Azerbaijan
BA Bosnia and
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
BI Burundi
BJ Benin
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling) Islands
CF Central African
Republic
CG Congo
CH Switzerland
CI Cô te d’Ivoire
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
ES Spain
ET Ethiopia
FI Finland
FJ F i j i
FK Falkland Islands
FM Micronesia
(Federated States of)
FO Faroe Islands
FR France
FX France, Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
GE Georgia
GF French Guiana
GH Ghana
GI Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
GS South Georgia and the
South Sandwich
GT Guatemala
GU Guam
GW Guinea-Bissau
GY Guyana
HK Hong Kong
HM Heard Island and
McDonald Islands
HN Honduras
HR Croatia
HT Haiti
HU Hungary
ID Indonesia
IE Ireland
IL Israel
IN India
IO British Indian Ocean
Territory
IQ Iraq
IR Iran (Islamic Republic
of)
IS Iceland
IT Italy
JM Jamaica
JO Jordan
JP Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
KI Kiribati
KM Comoros
KN Saint Kitts and Nevis
KP Korea, Democratic
People’s Republic of
KR Korea, Republic of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
LA Lao People’s
Democratic Republic
LB Lebanon
LC Saint Lucia
LI Liechtenstein
LK Sri Lanka
LR Liberia
LS Lesotho
LT Lithuania
LU Luxembourg
LV Latvia
LY Libyan Arab
MA Morocco
MC Monaco
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
MP Northern Mariana
Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
MX Mexico
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
NF Norfolk Island
NG Nigeria
NI Nicaragua
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
PL Poland
PM Saint Pierre and
Miquelon
PN Pitcairn
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
SI Slovenia
SJ Svalbard and Jan
Mayen
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
SO Somalia
SR Suriname
ST Sao Tome and Principe
SV El Salvador
SY Syrian Arab Republic
SZ Swaziland
TC Turks and Caicos
Islands
TD Chad
TF French Southern
Te r r it o r i e s
TG Togo
TH Thailand
TJ Ta j i k i s t a n
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
TT Trinidad and Tobago
TV Tuvalu
TW Taiwan
TZ Tanzania, United
Republic of
UA Ukraine
UG Uganda
UM United States Minor
Outlying Islands
US United States
UY Uruguay
UZ Uzbekistan
VA Vatican City State
(Holy See)
VC Saint Vincent and the
Grenadines
VE Venezuela
VG Virgin Islands (British)
VI Virgin Islands (U.S.)
VN Vietnam
VU Vanuatu
WF Wallis and Futuna
Islands
WS Samoa
YE Yemen
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
ZW Zimbabwe
!
BT-51005-5
(0301)
QUALITY SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
TOLL FREE: 1 (800) 537-5722
http://www.jvc.com
Authorized Service Centers
®
" !
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
LIMITED WARRANTY
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS LABOR
1 YR 90 DAYS
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. : Serial No. :
Purchase data : Name of dealer :
CONSUMER VIDEO 1-90
!
VICTOR COMPANY OF JAPAN, LIMITED
EN.
J
V
C
0701NHMDTEJEM
# !
