KAB Enterprise TR-005 Remote control User Manual

Kab Enterprise Co., Ltd. Remote control Users Manual

a href="https://usermanual.wiki/KAB-Enterprise" itemprop="url"> KAB Enterprise >

Users Manual

Thank-you for purchasing our Woods Model TM16+RC Series – 24 HR Outdoor Lighting Timer with Remote Control. Before using your timer, please read the following instructions carefully. FEATURES • Wirelessly turns lights and appliances on/off up to 50’ or 15m away • Choice of operating mode – dusk to dawn, 2 –8 Hour settings or manual on • Dual outlets – can control two devices • Easy to install – just plug it in. INSTALLATION 1. Mount the timer onto a wall near a grounded electrical outlet with the photo sensor facing outwards. (Note:) To ensure proper operation of automatic function. Ensure photocell sensor is shielded from all night time sources of light i.e. floodlights). 2. Nail or screw head must extend at least 3/16” out from the wall (nails or screws not included). Hang the receiver from the slot on back of the unit onto the nail or screw. Plug the power supply cord of the receiver into the outlet. 3. Plug the device cord into any of the two receptacles at the bottom of the receiver. PROGRAMMING ON/OFF SETTINGS Rotate the dial on the timer to select one of the following settings Dial position Function OFF Power OFF ON Power ON DUSK-DAWN Powers ON at dusk, OFF at dawn 2 Hrs ON at dusk – OFF in 2 hours 4 Hrs ON at dusk – OFF in 4 hours 6 Hrs ON at dusk – OFF in 6 hours 8 Hrs ON at dusk – OFF in 8 hours
TIMER AND REMOTE INTERACTION Your timer includes a remote control with temporary override: • Temporary override ON: turns the timer ON for desired settings (2, 4, 6 or 8 Hours). Please note if your timer dial position is preset it will restart from ‘0’ and count until it reaches the time set on the dial refer. • Temporary override OFF: turns the timer OFF for 12 hours before switching control back to the timer. Timer Dial position Using the Remote OFF Press the remote and the timer will turn OFF ON Press the remote the timer will turn ON DUSK-DAWN 2, 4, 6 or 8 HRS Press the remote and it will go into a manual restart mode. The timer will restart from ‘0’ and count until it reaches the time set on the dial, or dawn time. Please refer to examples below for further explanation. Examples  Timer set to ON or OFF REMOTE ON – OUTPUT ON; REMOTE OFF - OUTPUT OFF  Timer set to DUSK-DAWN When DUSK = 6:00 PM and DAWN = 5:00 AM If at 4 :00 PM REMOTE activated to ON --> OUTPUT ON and stay ON until 5:00 AM. Next day ON at DUSK , OFF at – DAWN If at 10 :00 PM REMOTE activated to OFF --> OUTPUT OFF = 10:00 PM, and stays OFF until DAWN next day. Next day ON at DUSK , OFF at DAWN  If TIMER setting is 2 HOURS (or 4,6,8 HOURS and so on) DAY OR NIGHT TIME REMOTE ON --> OUTPUT ON 2 HOURS (4,6.8 HOURS) Then OFF When DUSK --> OUTPUT ON 2 HOURS (4,6,8 HOURS) Then OFF
Download:
Mirror Download [FCC.gov]
Document ID716419
Application IDR77NJ7VOWpU9xk/aAdEcrA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.83kB (35356 bits)
Date Submitted2006-10-17 00:00:00
Date Available2006-10-17 00:00:00
Creation Date2006-09-21 14:58:59
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2006-09-21 14:58:59
Document TitleMicrosoft Word - TM-016 TR-005 說明書.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Elaine
FCC ID Filing: PAGTR-005

Navigation menu