KAB Enterprise TR-026S Remote Controller User Manual

KAB Enterprise Co., Ltd. Remote Controller

User Manual

OUTDOOR 3-OUTLET TIMERWITH REMOTE CONTROLINSTALLATION INSTRUCTIONSOPERATING INSTRUCTIONSMAINTENANCESAFETY INFORMATIONInstallationa. Mount the timer onto a wall near a groundedelectrical outlet with the photo sensor facingoutward.Note: To ensure proper operation of automaticfunction, ensure photocell sensor is shieldedfrom all nighttime sources of light, i.e. floodlights.b. Insert nail or screw (not included) into mountingsurface. Nail or screw head must extend at least 3/16 in. out from thewall. Hang the receiver from the slot on back of the unit onto the nail orscrew. Plug the power supply cord of the receiver into the outlet.c. Plug the device cord into any of the three receptacles at the bottom ofthe receiver.1. Button Layout2. Timer and remote interactionYour timer includes a remote control with temporaryoverride:• Temporary override ON:turns the timer ON for desired settings (2, 4, 6 or8 Hours). Please note that if the timer is set to a 2-,4-, 6- or 8-hour mode, it will come on at dusk andwill turn off 2, 4, 6, or 8 hours later.• Temporary override OFF: turns the timer OFF.3. Examples• Timer set to DUSK-DAWN When DUSK = 6:00 PMand DAWN = 5:00 AM.- If at 4 :00 PM REMOTE activated to ON --> TIMER OUTPUT ON and stays ON until 5:00 AM.- Next day, ON at DUSK, OFF at DAWN.- If at 10:00 PM REMOTE activated to OFF --> TIMEROUTPUT OFF = 10:00 PM and stays OFF until DAWN next day. - Next day ON at DUSK, OFF at DAWN.• If TIMER setting is 2 HOURS (or 4, 6, 8 HOURS and so on) DAY ORNIGHT TIME REMOTE ON --> TIMER OUTPUT ON 2 HOURS (4, 6, 8HOURS) then OFF.When DUSK --> TIMER OUTPUT ON 2 HOURS (4, 6, 8 HOURS) thenOFF. If DUSK is at 6:00 PM:(1) If at 5:00 PM REMOTE set ON, then TIMER OUTPUT ON immediately until 7:00 PM.(2) TIMER ON = 6:00 PM, TIMER OFF = 8:00 PM. If at 1:00 PM REMOTE set ON, then TIMER OUTPUT turns ON until 3:00 PM. (3) TIMER ON = 6:00 PM. If at 7:00 PM REMOTE set ON TIMER OUTPUTON until 9:00 PM (as time count restarted at time remote activates to ON).(4) TIMER ON = 6:00 PM. If at 7:00 PM REMOTE set OFF, then TIMEROUTPUT turns OFF immediately until next day.SPECIFICATIONS: 14/3 AWG SJTW vinyl cordRATINGS:125 V ac 60 Hz, 15 A Resistive,15 A General Use,1,000 W Tungsten,500 VA Electronic Ballast,1/2HP. 120 V ac 60 Hz, 8.3 A BallastDial position FunctionOFF Power OFFON Power ON2 Hrs ON at dusk – OFF in 2 hours4 Hrs ON at dusk – OFF in 4 hours6 Hrs ON at dusk – OFF in 6 hours8 Hrs ON at dusk – OFF in 8 hoursDUSK-DAWN Powers ON at dusk, OFF at dawnTimer Dial position Using the RemoteOFF Press the remote and the timer will turn ON/OFF ON Press the remote and the timer will turn ON/OFFDUSK-DAWN 2, 4, 6 or 8 HRSPress the remote and it will go into a manualrestart mode. The timer will restart from ‘0’ andcount until it reaches the time set on the dial, ordawn. Please refer to examples below for further explanation. HELPFUL TIPS• Before using your timer, please read the following instructions carefully.• When set to “ON”, the timer will provide continual power to attached devicesuntil the timer is switched to “OFF”, or to any of the other operating modes.2ReceiverTransmitter2145361. Timer unit: The timer will control an array of devices by setting the dial.2. Remote control:• ON: When the on button is pressed, it will override the timer’s currentprogram to on function.• OFF: When the off button is pressed, it will override the timer’s currentprogram to off function.• Remote indicator light: The LED light indicates that the ON or OFFbutton is being pressed.3. Timer dial: Rotate the dial on the timer to select one of the following settings4. Power indicator light: The power indicator light indicates that the timer ison.5. Photo sensor: The sensor will sense for light and dark, and direct thetimer to act accordingly.6. Outlets: The three outlets located on the button of the timer allows theuser to plug an array of devices into it.WARNING:• The device must be mounted in a vertical position with the receptacle facingdownward and with the receptacle at least 1.4 M above the ground level.• Let the switch hang downward so moisture does not accumulate in the outlet.• Suitable for Outdoor Use, Store indoors when not in use. Not for waterimmersion or for use were directly exposed to water3TROUBLESHOOTINGProblemSolutionThe lights do not turn on,even when the timer is inthe “ON” position.Ensure the lights are functional by plugging them directlyinto the outlet. The lights do not turn on 2,4,6, or 8 hrs. after dusk.Be sure that the timer is not near ambient light sources.The lights do not turn on and off via remote control. Confirm remote operation after replacing batteries.Be sure that the dial is fully turned to the “ON” position bylistening for the clicking sound. Be sure that the lights are in the “ON” position if they havetheir own switch. Be sure that the outlet that the timer is plugged into isactive. Confirm that the timer is plugged properly into the outlet, and that the light is turned on if there is a switch. Made in ChinaSAVE THESE INSTRUCTIONS!SAVE THESE INSTRUCTIONS!Battery Handling and Usage Keep batteries away from children and pets.• Follow the battery manufacturer’s safety and usage instructions.• Insert the battery observing the proper polarity (+/-) as indicated insideBattery Compartment.• Remove a spent or discharged battery from the product. Remove thebattery when not using the product for an extended period.• Never throw batteries into a fire. Do not expose batteries to fire or otherheat sources.• Dispose or recycle spent / discharged batteries in compliance with allapplicable laws. For detailed information contact your local solid wasteauthority.• Battery contains mercury. Do not put in trash. Recycle or manage ashazardous waste.WARNING:Federal Communications Commission Interference StatementThis equipment has been tested and found to comply with the limits for ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation of the device.FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate thisequipment.Industry Canada statement: This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.ONOFFCAUTION: Failure to properly align the battery polarity can cause personal injury and/or property damage.Replacing the battery• Remove the Battery compartment cover from the backof the remote control by sliding the cover in thedirection that its trends curve.• Remove the spent battery and place a new DC 12VType A23 battery into the Battery Compartmentcorrectly observing the polarity indications (+/-) insidethe Battery Compartment.• Replace the Battery Compartment Cover.• Clear the battery contacts and also those of the deviceprior to battery installationRECEIVER MODEL: TM-069RTRANSMITTER MODEL: TR-026SFCC ID: PAGTR-026SIC: 4494A-TR026SWARNING:This product can expose you to DINP which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.BACKTR-026S Remote Controller User Manual

Navigation menu