KACE Electronics Asia KF-2100 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	98449
Application ID	1xx3OZv46May4/d9N21HJw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	174.24kB (2178022 bits)
Date Submitted	2000-05-01 00:00:00
Date Available	2000-05-31 00:00:00
Creation Date	2000-05-01 11:32:42
Producing Software	Photoshop PDF Plug-in 1.0
Document Lastmod	2000-05-01 11:33:42
Document Title	Users Manual
Document Creator	Photoshop PDF Plug-in 1.0

Owner’s Manual
Model [AT—2100
Two Way Family Radio
KACE ELECTRONICS (ASIA) INCI
FCC ID: MUDKF-2100
EXHIBIT #: fl M H
CONGRATULATIONS ON YOUR SELECTION
OF THE KFj 2100(FAMILY RADIO)
it Is one the most sophisticated and reliable two way
Family radios available.
BEFORE OPERATING YOUR KF 220.0(FAMILY RADIO)
READ THIS MANUAL CAREFULLY
FCC WARNING
Replacement or substitution of transistors, diodes or
other parts of a unique nature, with parts otherthan those
recommended by the manufacturer, may cause a violation
ofthe technical regulations of Part 15 of FCC Rules.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF- -2I00
EXHIBIT It: I O
- FEATURES
Your KF-zloo Family Radio is a portable, easy to use, two-way
radio that you can carry almost anywhere. it is skillfully constructed
to give you reliable communications for many different
applications. The KF- 21 00 is ideal for use around the house, in
your boat, on hunting and camping trips, on the ski slopes or at,
the mall.
Advanced PLL circuitry uses a new technique for generating
the required frequencies, with less dependency on crystals.
The result is much tighter frequency’control and superior
reliability.
. PERFORMANCE
Yourtransceiver will achieve its maximum operating range
when communicating with anothertransmitter in a flat open
area with no trees or buildings obstructing its signal. Range
may be up to two miles under such conditions. Obstacles such
as buildings, trees or mountains will tend to reduce the
transceiver’s effective range.
KACE ELECTRONlCS (ASIA) INC.
FCC ID: MUDKF-‘HOO
EXHIBIT #; vi 1M)-
1. Power OnIOff - Volume Control: Flotate clockwise to turn the
unit on and increase the listening volume level. Rotate
_ counterclockwise to decrease the listening volume level orturn
the transceiver off.
2. Push-to-Talk(PTT) button: Press to transmit. Release to
receive.
3. Monitor Button (M): Press and hold to bypass the squelch and
listen to channel aetivity.
{ 4. Belt Clip
5. Battery Compartment
6. Speaker
7. Microphone
8.' Call Button: Pressand hold this button to send a ringing sound to
other radios tuned to the same channel and CTCSS code.
9. Up Button: Press this button to increase the channel number.
10. Down Button: Press this button to decrease the channel number.
11. LCD Display: Displays information about the settings of the
transceiver. » ‘
12. Menu Button: Press this button to scroll through the following
settings: TC, SCan, BP, LC
13. Antenna
14. Microphone Jack: For use with an external microphone and
P'IT button.
15. Speaker Jack: For use with an external speaker.
I6. V0} : 12> flanSmTt without Pressing PTT bLlT'TOH,
,’\
KACE ELECTRONKCS (ASIA) INC.
FCC ID: MUDKF-floo/
EXHlBIT a: 7 lot; .fv. . . _
- LCD DISPLAYiAND OPERATION
TheKF- mo 5 is equipped with an LCD display to indicate its
settings and functions. The Displayincorporates automatic .
backlighting to allow it to be seen in the dark. Pressing any of
the buttons except the P'I'l' (Push-to-Talk) button, will illuminate
the display. The display will remain lit for 5 seconds after
any of these buttons is pressed.
KACE ELECTRONICS (ASIA) ch,
"" *"' ' ., ~— ~ - AFCCID: Moon-3100 TE”,
EXHIB11'#:
1 14 Displays the current channel number (1 to 14).
3 m Appears while scanning channels.
4 Appears while transmitting.
5 BUSY Appears while receiving.
6 . m Power Saver: Appears when the battery saver
mode is active
7 J“ Appears while the Button Conformation Tone
feature is activated.
8 I-I—O Appears whilethe keypad is locked
9, m Flashes when the battery voltage is low. The
transceiver will also beep to indicate low battery
voltage. «-
(0. DW Allows yogic mom/4m” a second channel
while on +‘ne first channel
H. peg Inficrmg you TX Ts done
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-7100
EXHIBIT #: 7th 0-
' .._.__»‘_i, "fl—w— WA -— 'FCC1D: MUDKF~2100 A—- ,
- BATTERY INSTALLATION
Your KF—lloc requires three “AA” alkaline
cells or three rechargeable “AA" nickel —
cadmium cells. Alkaline batteries will
provide the best performance from your
transceiver. Remove the battery cover by
releasing the clasp at the bottom of the
unit and lifting the coverfrom the battery
compartment. Observe the polarity symbols
inside the batterytray when installing the
batteries.
CAUTION: Incorrect battery installation
can damage the unit.
- BATTERY SAVER MODE
Your KF—zioo has a unique circuit designed to dramatically
extend the life of its batteries,Tenfis_e_conds afterthe transmit
button has been pressed, the KF—Zloo’ will switch to battery
saver mode. This will be indicated by the flashing (Power
Saver) icon. The transceiver will remain ready to receive any
incoming transmissions while in the battery saver mode.
Pressing any of the buttons will exit the battery saver mode.
KACE ELECTRONICS (ASlA) INC.
EXHlBlT 14: * lo _.
DOWN
UP/
0000000
00000000
00000000
00000000
0000000
00000
00000000
KACE ELECTRONICS (ASIA) INC. .
Rhfl~‘w “fi. 7 ”7 A ¥¥77v»
FCC ID: MUDwr-flno
EXHIBIT #: __| O L
To Receive
1. Turnthe poweron.
2. Check the battery condition on the display. ltthe icon
is displayed, charge or replace the batteries.
3. Set the desired channel and CTCSS code.
4. Adjust the volume control to the desired listening volume
by pressing and holding the monitor button while turning
the volume control knob.
5. The BUSY icon will be displayed when the
transceiver detects an incoming transmission.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-ZlOO
m,» 7... “a- , , ~ - ~ ~ EXHIBIT #: lo 37
To Transmit
1. Set the desired channel.
2. Press and hold the PTT (Push-to-Talk) button while speaking
slowly and clearly in a normal voice, approximately 2 to 3
inches from the microphone.
The-icon will be displayed while transmitting.
Release the PTT button when you finish speaking to
receive incoming signals.
pp)
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-Zl oo
EXHIBIT #: J O {L
Menu Button
Pressing this button will sequentially select among the following
features, Continuous Tone Coded Squelch System (to), channel
scan (SCan), button conformation tones (BP) and the keypad
lock (LC). Each successive press of the button will advance
the display to the next feature in order. if no buttons are
pressed for 5 seconds, the unit will return to standby mode and
the display will indicate the current channel. Pressing the PTT
or Monitor button will also return to the standby mode.
Continuous Tone Coded Squelch System (CTCSS)
This feature allows you to ignore transmissions from other
units that are using the same channel. One of 38 privacy
codes may be selected. The same code must also be
selected on those transceivers with which you desire to
communicate. Keep in mind, however, that this feature does
not prevent others from listening to your transmissions.
mu: thTRONECS (AS‘A‘ N
FCC lD: MUDKF—ZIOO l / KC.
EXHIBIT #: A lol—
To select a CTCSS squelch code, press the menu button
once or until‘“tc” is shown on the display. The small flashing
numbers to the right represent the current squelch code
setting. “OF” (off) indicates that the CTCSS system is off.
Use the UP and DOWN buttons to select the desired
squelch code number. To allow the transceiver to receive all
messages on a particular channel select the “CF” (off)
setting. After 5 seconds, the unit will return to the standby
mode and the CTCSS squelch code will be effective on all
14 channels. The Display will indicate the current channel
number with large digits on the left and the current CTCSS
squelch code with the smaller digits to the right. Only the
channel number will be displayed if the CTCSS system is
off.
Continuous Tone Coded Squelch System
Tone Frequencies
CTCSS Freq. Hz CTCSS Freq. Hz
1 67.0 20 131.8
2 71.9 21 136.5
3 7.4.4 22 141 .3
4 77.0 23 146.2
5 79.7 24 151.4
6 82.5 25 156.7
7 85.4 26 162.2
8 88.5 27 167.9
9 91.5 28 173.8
10 94.8 29 179.9
11 97.4 30 186.2
12 100.0 _ 31 192.8
13 103.5 82 203.5
14 107.2 33 210.7
15 110.9 34 218.1
1 6 114.8 35 225.7
17 118.8 36 233.6
18 123.0 37 241.8
19 127.3 38 250.3
KACE ELECTRONICS (ASIA) INC.
7 FCC 1D: MUDKF-Zl 0
exmexw: JO f» 7 431
Channel Scan
This feature allows the transceiver to automatically check all
14 channels for activity. Press the menu button twice or until
“SCAn” is shown on the display. Pressing the UP or DOWN
buttons will cause the transceiverto immediately begin scanning
the channels for activity. When asignal is received, the unit will
pause on that channel forthe duration of the signal and an
additional 5 seconds. it no other signals are received during
this period, the transceiver will resume scanning. While scanning,
SC will be shown in the upper right of the display. Pressing
any of the buttons will exit scan mode.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUIWF-ZIOO
, ,, kfifihfiflgxmmw: 409, _ , J“ A. A, .»
Button Conformation Tones
The transceiver can be set to confirm each button press with a
beep tone or, if the user prefers, these confirmation tones can
be turned off. Wheneverthe tones are on, the J“ icon will be
shown on the display. To turn the beep tones on or off, press
the menu button three times or until “BP” shows on the display.
The current setting will be indicated by the two smaller characters
to the right (“on" or “of" (off)). Press the UP or DOWN button to
change the setting. After 5 seconds, the unit will return to the
standby mode. ~
KACE ELECTRONICS (ASIA) mc.
FCC ID: Mlmvtw- 00
EXHIBIT it: 0
Keypad Lock
To prevent the transceiver’s settings from being inadvertently
changed, the keypad can be locked. This will inhibit the function
ofthe UP and DOWN buttons. This is useful when the KF— 2100‘
is being used by small children, or when the unit is kept in a
pocket. A key icon will be shown on the display whenever the
keypad is locked. To look or unlock the keypad, press the
menu button fourtimes or until “LC” is shown on the display.
The current setting will be indicated by the two smallercharacters
to the right. (“on” indicates the keypad is locked, “of” (off)
indicates that the keypad is unlocked). Press the UP or
DOWN button to change the setting. Afters seconds, the unit
will return to the standby mode. -
Call Button
Press this button to transmit a ringing tone to all other transceivers
set to the same channel and CTCSS code.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-Z l00
EXHIBXT#: “toe; . ., , .,
. WARNING
I Remove the batteries from the transceiver if it is not expected to
be used for long periods. This will eliminate the possibility of
battery acid leaking from the batteries and corroding the transceiver.
I Avoid exposing the unit to water or extremes of temperature.
I Do not use this device in or near a mining facility, which uses
remotely triggered explosives or in areas labeled “Blasting Area”.
Premature or accidental detonation may result.
I Do not attempt to modify or in any way increase the output of_ this
transceiver. Its output is designed to meet the legal limits set by
the FCC.
I Do not use this device or change its batteries in potentially explosive
atmospheres as sparks in such areas could result in’an explosion.
I Turn your transceiver off wherever posted notices restrict the use
of radios or cellular telephones. Facilities such as hospitals may
use equipment that is sensitive to RF energy.
I Turn your transceiver off on board aircraft when requested to do so.
I Do not place your transceiver in front of a vehicle's air-bag. If the
air-bag deploys, it could propel the transceiver like a projectile.
I This transceiver complies with F.C.C. regulations for use in the
United States. Use in other countries may be prohibited or re-
stricted by local regulation. Please check with the local regulating
agency before using this device outside of the United States.
KACE ELECTRONICS (ASIA) TNC,
FCC ID: MUDKF- 100
l A_.
1 ~~A—~—4f“‘7*~~~ ' f “m EXHIBIT #: J
. SPECIFICATIONS
Channels: 14
Output Power: 500 mw ERP
Battery Life
Alkaline: 30 - 35 Hours
NlCd: 13 Hours
Power Source: 4.5V DC
Channel Frequencies:
Channel MHz Channel
1 462.5625 8
2 462.5875 ' 9
3 462.6125 10
4 462.6375 ' 11
5 ~ , 462.6625 12
6 462.6875 13
7 462.7125 14
mos (ASIA) TNC-
moo
D 5
MHz
467.5625
467.5875
467.6125
467.6375
467.6625 -
467.6875
467.7125
KAcE ELECTRO
Fcc 11): MUD!“
EXHIBIT #: - I<

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:05:01 11:33:42
Creator                         : Photoshop PDF Plug-in 1.0
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 2000:05:01 11:32:42
Page Count                      : 19

EXIF Metadata provided by EXIF.tools