KACE Electronics Asia KF-2200 Family Radio Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	116219
Application ID	CA2SApMvfDlQNVOs0azaVg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	463.36kB (5792036 bits)
Date Submitted	2000-09-08 00:00:00
Date Available	2000-11-22 00:00:00
Creation Date	2000-09-07 15:42:04
Producing Software	Photoshop PDF Plug-in 1.0
Document Lastmod	2000-09-07 15:42:51
Document Title	Users Manual
Document Creator	Photoshop PDF Plug-in 1.0

Owner’s Manual
Model KF- 2200
Two Way Family Radio
KACE ELECTRONICS (ASIA) INCA
FCC ID: MUDKF-2200
mum-r it: 3L
CONGRATULATIONS ON YOUR SELECTION
- OF THE IKE-2200 (FAMILY RADIO)
it is one the most sophisticated and reliable two way
Family radios available.
BEFORE OPERATING YOUR KF' 220.0(FAMILY RADIO)
READ THIS MANUAL CAREFULLY
FCC WARNING
Replacement or substitution of transistors, diodes or
other parts of a unique nature, with parts other than those
_ recommended by the manufacturer, may cause a violation
of the technical regulations of Part 15 of FCC Rules.
CE ELECTRONICS (ASIA) INC.
Iféc ID: MUDKF-220I)
EXHIBIT It:
I FEATURES
Your Kilzzoo Family Radio is a portable, easy to use, two-way
radio that you can carry almost anywhere. It is skillfully constructed
to give you reliable communications for many different
applications. The KIT-2200 is ideal for use around the house, in
your boat, on hunting and camping trips, on the ski slopes or at.
the mall.
Advanced PLL circuitry uses a new technique for generating
the required frequencies, with less dependency on crystals.
The result is much tighter frequency'control and superior
reliability. ,
. PERFORMANCE .
Your transceiver will achieve its maximum operating range
when communicating with anothertransmitter in a flat open
area with no trees or buildings obstructing its signal. Range
may be up to two miles under such conditions. Obstacles such
as buildings, trees or mountains will tend to reduce the
transceiver’s effective range.
KACE ELECTRONICS (ASIA) INC.
rcc ID: MUDKF-2200
EXHIBIT #1 L
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-2200
EXHIBIT #: 3Q_
1.
9’
5°
10.
11.
12.
13.
14.
9°N9’9’P
taxman“ it: KE_
Power OnIOfl - Volume Control: Rotate clockwise to turn the
unit on and increase the listening volume level. Rotate
. counterclockwise to decrease the listening volume level or turn
the transceiver off.
Push-to-Talk (PTT) button: Press to transmit. Release to
receive.
Monitor Button (M): Press and hold to bypass the squelch and
listen to channel activity.
Belt Clip
Battery Compartment
Speaker
Microphone
Call Button: Pressand hold this buttonCto send a ringing sound to
other radios tuned to the same channel and CTCSS code.
Up Button: Press this button to increase the channel number.
Down Button: Press this button to decrease the channel number.
LCD Display: Displays information about the settings of the
transceiver.
Menu Button: Press this button to scroll through the following
settings: TC, SCan, BP, LC
Antenna
Microphone Jack: For use with an external microphone and
PTl' button. -
Speaker Jack: For use with an external speaker.
V035} TB tronsmrt without Pressing PTT button.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-ZZOO
TheKl-Téi-Z‘Zbo is equipped with an LCD display to indicate its
settings and functions. x The Displayincorporates automatic ,
baclglighting to allow itto be seen in the dark. Pressing any of
the buttons except the PTI' (Push-to-Talk) button, will illuminate
the display. The display will remain lit for 5 seconds alter
any of these buttons is pressed. A
KACE ELECTRONICS (ASIA) INC.
FCC lD: MUDKF-ZZOO
.__t.____._.._,___.t._.. ,- - F
'— EXHIBIT It: j
5! 1 14 Displays the current channel‘nurnber (1 to 14).
f 2 38 Displays the current CTCSS number (1 to 38).
é 3 Appears while scanning channels.
T1 4 Appears while transmitting.
5 BUSY Appears while receiving.
6 . m Power Saver: Appears when the battery saver
mode is active
7 J“ Appears while the Button Conformation Tone
feature is activatesl.
8 u—O Appears while the keypad is locked
9, M Flashes when the batteryvoltage is low. The
transceiver will also beep to indicate low battery
voltage. _ _ -'
lo. Dw Allows ‘yotilomm‘lor‘a seco'ncl channel
while on +he firsf channel
ll. 9&8 Ih-Forms You TX Ts done
KACE ELECTRONICS (ASIA) mc.
FCC ID: wen-2200 __
EXHlBlT#: 3g .
. BATTERY INSTALLATION
i YourKFéle'OL requires three “AA" alkaline
cells or three rechargeable "AA" nickel -
cadmium cells. Alkaline batteries will
provide the best performance from your
transceiver. Remove the battery cover by
releasing the clasp at the bottom of the
unit and lifting the coverfrom the battery
compartment. Observe the polarity symbols
inside the battery tray when installing the
batteries.
CAUTION: Incorrect battery installation
can damage the unit.
I BATTERY SAVER MODE
Your KFt-zzob has a unique circuit designed to dramatically
extend the life of its batteries. Ten seconds afterthe transmit
button has been pressed, the KP-ZZDD will switch to battery
saver mode. This will be indicated by the flashing (Power
Saver) icon. The transceiver will remain ready to receive any
incoming transmissions while in the battery saver mode.
Pressing any of the buttons will exit the battery saver mode.
KACE ELECTRONICS (ASIA mc
.‘ FCC 1D: MUDKF-2200 ) '
_ _____.___--—~--— -- EXHIBITfi: QLL
l“— “M, ”w
I USING YOUR KP-‘ZZOO
11—0 icon is shown on the display,
you will need to unlock the keypad. (See the description
of the keypad lock later in this manual).
\* KACE ELECTRONICS (ASIA) mo " W
FCC ID: MUDKF-ZZOO
EXHlBIT #: 3L
To Receive
1. Turn the power on.
2. Check the battery condition on the display. If the icon
is displayed, charge or replace the batteries.
3. Set the desired channel and CTCSS code.
4. Adjust the volume control to the desired listening volume
by pressing and holding the monitor button while turning
the volume control knob.
5. The BUSY icon will be displayed when the
transceiver detects an incoming transmission.
KACE ELECTRONICS (ASIA) [NC
FCC lD: MUDKF-2200
EXHIBITfl: SS
To Transmit
1. Set the desired channel.
2. Press and hold the P11” (Push-to-Talk) button while speaking
slowly and clearly in a normal voice, approximately 2 to 3
inches from the microphone.
3. The-icon will be displayed while transmitting.
4. Release the PTT button when you finish speaking to
receive incoming signals.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-2200
EXHIBIT # XE
Menu Button
Pressing this button will sequentially select among the following
features, Continuous Tone Coded Squelch System (tc), channel
scan (SCan), button conformation tones (BP) and the keypad
lock (LC). Each successive press of the button will advance
the display to the next feature in order. If no buttons are
pressed for 5 seconds, the unit will return to standby mode and
the display will indicate the current channel. Pressing the PTT
or Monitor button will also return to the standby mode.
Continuous Tone Coded Squelch System (CTCSS)
This feature allows you to ignore transmissions from other
units that are using the same channel. One of 38 privacy
codes may be selected. The same code must also be
selected on those transceivers with which you desire to ‘
communicate. Keep in mind, however, that this feature does
not prevent others from listening to yourtransmissions.
KACE ELECTRONICS
FCC to: mucky-moms“) INC"
EXHIBIT #: fl
KACE ELECTRONICS (ASIA) l'NC.
FCC ID: MUDKF-ZZOO
EXHIBIT fl: gm
J"; '
, .
z i
‘ 5 Continuous Tone Coded Squelch System
i Tone Frequencies
. é CTCSS Freq. Hz CTCSS Freq. Hz
i 1 67.0 . 20 131.8
» 2 71.9 21 136.5
3 74.4 22 141.3
4 77.0 23 . 146.2
5 79.7 24 151.4
6 82.5 - 25 156.7
7 85.4 26 162.2
8 . 88.5 , 27 167.9
g 9 91.5 28 173.8
ii 10 94.8 29 179.9
i 11 97.4 30 186.2
12 100.0 . 31 192.8
13 103.5 32 203.5
14 107.2 33 210.7
. ' 15 110.9 34 218.1
3 16 114.8 35 225.7
17 118.8 36 233.6
18 ' 123.0 37 241.8
‘; , 19 127.3 38 250.3
"v KACE ELECTRONICS (ASIA) mc.
- ,._.- R... » » FCC 113: MUDKF-2200 ‘ "
EXHIBIT 11: 34
Channel Scan
This feature allows the transceiver to automatically check all
14 channels for activity. Press the menu button twice or until
“SCAn” is shown on the display. Pressing the UP or DOWN
buttons will cause the transceiverto immediately begin scanning
the channels for activity. When a signal is received, the unit will
pause on that channel for the duration of the signal and an
additional 5 seconds. If no other signals are received during
this period, the transceiver will resume scanning. While scanning,
-will be shown in the upper right of the display. Pressing
any of the buttons will exit scan mode.
KACE ELECTRONICS (ASIA) INC.
FCC to: MUDKF-2200
EXHLBIT #.~ icy
<- —<—.-. \_ ..
Button Conformation Tones
The transceiver can be set to confirm each button press with a
beep tone or, if the user prefers, these confirmation tones can
be turned off. Wheneverthe tones are on, the J“ icon will be
shown on the display. To turn the beep tones on or off, press
the menu button three times or until “BP” shows on the display.
The current setting will be indicated by the two smaller characters
to the right (“on” or “of” (off)). Press the UP or DOWN button to
change the setting. Afters seconds, the unit will return to the
standby mode. ‘ '
mes ELECTRONICS (ASIA) INC.
Fcc 1D: mupélbzzoo
EXHIBIT 4: A
is being used by small children, or when the unit is kept in a
pocket. A key icon will be shown on the display whenever the
keypad is locked. To look or unlock the keypad, press the
menu button fourtimes or until “LC” is shown on the display.
The current setting will be indicated by the two smaller characters
to the right. (“on" indicates the keypad is locked, “of” (off)
indicates that the keypad is unlocked). Press the UP or
DOWN button to change the setting. After 5 seconds, the unit
will return to the standby mode. ‘
Call Button
Press this button to transmit a ringing tone to all other transceivers
set to the same channel and CTCSS code.
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-2200
EXHIBIT 14: _8Q_
- WARNING
I Remove the batteries from the transceiver if it is not expected to "
be used for long periods. This will eliminate the possibility of
battery acid leaking from the batteries and corroding the transceiver.
I Avoid exposing the unit to water or extremes of temperature.
I Do not use this device in or near a mining facility, which uses
remotely triggered explosives or in areas labeled “Blasting Area".
Premature or accidental detonation may result.
I Do not attempt to modify or in any way increase the output of this
transceiver. lts output is designed to meet the legal limits set by
the FCC.
l .
I Do not use this device or change its batteries in potentially explosive {k 1
‘ atmospheres as sparks in such areas could result in an explosion. g 7 ’
I Turn your transceiver off wherever posted notices restrict the use
of radios or cellular telephones. Facilities such as hospitals may
use equipment that is sensitive to RF energy.
I Turn your transceiver off on board aircraft when requested to do so.
i I Do not place your transceiver in front of a vehicle’s air-bag. If the
air-bag deploys, it could propel the transceiver like a projectile.
I This transceiver complies with F.C.C. regulations for use in the
United States. Use in other countries may be prohibited or re-
stricted by local regulation. Please check with the local regulating
agency before using this device outside of the United States.
KACE ELECTRONICS (ASIA) mc.
' FCC lD: MUDKFJZOO
\ .,k,,,,. 7M " ' ’ "' " EXHIBIT=4: 8L
. SPECIFICATIONS
Channels: 14
Output Power. 500 mw ERP
Battery Life
Alkaline: 30 - 35 Hours
NiCd: 13 Hours
Power Source: 4.5V DC
Channel Frecjuencies:
Channel I M Hz Channel M Hz
1 . 462.5625 8 467.5625
2 462.5875 - 9 467.5875
3 462.6125, ' 10 467.6125
4 - '- 462.6375 ' 11 467.6375 < < ‘
5 - .. 462.6625 ’ 12 467.6625
' 6 462.6875 13 467.6875 '
7 _ 462.7125 14 467.7125
KACE ELECTRONICS (ASIA) INC.
FCC ID: MUDKF-2200
EXHIBIT II: 3 S_

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:09:07 15:42:51
Creator                         : Photoshop PDF Plug-in 1.0
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 2000:09:07 15:42:04
Page Count                      : 19

EXIF Metadata provided by EXIF.tools