KAGA ELECTRONICS KM154A Module User Manual

Kaga Electronics Co.,Ltd Module

User Manual

Download: KAGA ELECTRONICS KM154A Module User Manual
Mirror Download [FCC.gov]KAGA ELECTRONICS KM154A Module User Manual
Document ID1141840
Application IDp2VVcuypIzQbqmit9Dvjsw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.6kB (69998 bits)
Date Submitted2009-07-21 00:00:00
Date Available2009-08-30 00:00:00
Creation Date2009-06-12 16:28:44
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2009-06-12 16:28:44
Document TitleMicrosoft Word - User Manual.DOC
Document CreatorPScript5.dll Version 5.2.2
Document Author: matsui

KM-154A
Zigbee_Module
User Manual
index
1.Introduction ....................................2
2.Temperature Range ...............................2
3.Absolute Maximumratings .........................2
4.DC Characteristics ..............................2
5.Outline .........................................2
6.Directions ......................................3
( 1 / 3 )
1.Introduction
This manual are applied to Zigbee_Module(KM154A).
2.Temperature Range
Parameter
Humidity Condition
Min
Typ
Max
Operating Temperature Range
20~85%
-20
70
℃
Storage Temperature Range
0~80%
-30
80
℃
3.Absolute Maximumratings
Symbol
Parameter
Rating
Unit
VCC
Supply Voltage
-0.3 to 3.6
RFIN
Input RF Level
10
dBm
4.DC Characteristics
Symbol
Parameter
MIN
TYP
MAX
Unit
2.7
3.0
3.3
VCC
Supply voltage
VIH
High level input voltage
0.7xVCC
VCC
VIL
Low level input voltage
0.3xVCC
VOH
High level output voltage
VCC -0.5
VCC
VOL
Low level output voltage
0.4
5.Outline
3.3
Ex. Antenna
motherBOARD
1.8
1.25
B to B Connecter
7.5
10.55
5.325
1.5
1.05
Chip Antenna
30
29
10.8
17
LABEL
0.35
SHIELD
1.8
0.525
0.725
14.3
3.6
1)Either a built-in antenna or an external antenna can be used.
( 2 / 3 )
1.2
6.Directions
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2. FCC inserts:
statement cautioning the user that changes or modifications not expressly approved by Kaga Electronics
Co.,Ltd could void the user’s authority to operate the equipment.
3. Please do not put the metallic one (parts, GND patterns, signal wires, and cases, etc.) near the module.
*This greatly influences a wireless performance.
4.Do not put parts between the module and the mother board.
5.Design the GND area on the mother board side as widely as possible.
( 3 / 3 )

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2009:06:12 16:28:44+09:00
Modify Date                     : 2009:06:12 16:28:44+09:00
Page Count                      : 3
Creation Date                   : 2009:06:12 07:28:44Z
Mod Date                        : 2009:06:12 07:28:44Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : matsui
Metadata Date                   : 2009:06:12 07:28:44Z
Creator                         : matsui
Title                           : Microsoft Word - User Manual.DOC
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BXT-KM154A

Navigation menu