KAGA ELECTRONICS WL0169 wifi adapter User Manual WL0169
KAGA ELECTRONICS (USA) INC wifi adapter WL0169
user manual
WL0169 provides up to 150Mbps stable transmission
speed, with its easy-to-install 4pin interface, allowing
users to quickly and easily setup wireless security. This
product can also simultaneously operate bandwidth
intensive applications such as voice, and video.
Applications using a lot of bandwidth that are sensitive to
interruptions such as voice and video applications are
given priority in order to assure quality. It also works well
with other 11g and 11n protocol wireless products.
Complies with IEEE 802.11n; 802.11g; 802.11b
standard for 2.4GHz Wireless LAN.
Supports PC Card hot-SWAP and true Plug & Play.
Works with all existing network infrastructure.
WIFI portected security(WPS),set your security at a
push button
Capable of up to 128-Bit WEP Encryption.
Freedom to roam while staying connected.
22-Mbps Packet Binary Convolution Coding (PBCC)
(according to the IEEE Std 802.11b high-rate
specification).
UP to 54 Mbps High-Speed Transfer Rate in 802.11g
mode of operation.
UP to 150 Mbps High-Speed Transfer Rate in 802.11n
mode of operation.
Rich diagnostic LED indicators with external 2dbi Antenna.
Supports Window2000,XP32-64,Vista 32/64,Win7
32/64, Linux, Mac.
Low power consumption.
Easy to install and configure.
Modulation
Type OFDM/CCK/16-QAM/64-QAM
Operating
System Window2000,XP32-64,Vista
32/64,Win7 32/64,Linux,Mac
Standard IEEE 802.11n; 802.11g; IEEE
802.11b
Interface 4 pin
Frequency 2.4~2.4835 GHz
Spread
Spectrum DSSS
Transmission
Distance
Indoor up to 100m , outdoor up to
300m (it is limited in an
environment)
Data Rate
802.11b:11/5.5/2/1 Mbps
802.11g:54/48/36/24/18/12/9/6
Mbps
Draft 802.11n:up to 150Mbps
Transmit
Power
802.11b:17.13 dBm
802.11g:13.38 dBm
802.11n(20MHz):13.24 dBm
802.11n(40MHz):12.70 dBm
Data
Security 64/128/152 bit WEP, WPA/WPA2,
WPA-PSK/WPA2-PSK (TKIP/AES)
LED
Indicator Status
Receiver
Sensitivity
150M: -68 dBm@10% PER
130M: -68 dBm@10% PER
108M: -68 dBm@10% PER
54M: -68 dBm@10% PER
11M: -85 dBm@8% PER
6M: -88 dBm@10% PER
1M: -90 dBm@8% PER
Environment
Operating Temperature: 0℃~40℃
(32℉~104℉)
Storage Temperature: -40~70℃
(-40℉~158℉)
Relative humidity: 10%~90%
non-condensing
Storage Humidity: 5%~95%
non-condensing
wi
f
i Adapte
r
802.11b/g/n (1T*1R)
Model NO.: WL0169
Product Description
Product Features
Product
Specification
FCC Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help.
To assure continued compliance, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s authority
to operate this equipment. (Example- use only shielded
interface cables when connecting to computer or peripheral
devices).
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment and it also
complies with Part 15 of FCC RF Rules. Operation is
subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Caution!
The manufacturer is not responsible for any radio or
TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user authority to operate the
equipment.
1. This device and its antenna(s) must not be
co-located or operating in conjunction with any
other antenna or transmitter.
2. This compliance to FCC radiation exposure limits
for an uncontrolled environment, and minimum of
20 cm separation between antenna and body.
3. Only the type of chip antenna tested may be used.
4. The end product must carry a label stating
"Contains TX FCC ID: XXC-WL0169".