KAONMEDIA KSTB2020 KSTB2020 User Manual

KAONMEDIA Co., Ltd. KSTB2020

User Manual

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alertthe user to the presence of uninsulated “dangerous voltage” within the product's enclosurethat may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presenceof important operating and maintenance (servicing) instructions in the literature accompanyingthe product.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Care and MaintenanceImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in    accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators,    heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has     two blades with one wider than the other. A grounding type plug has two blades and a third    grounding prong. The wide blade or the third prong is provided for your safety. When the     provided plug does not fit into your outlet, consult an electrician for replacement of the     obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience     receptacles, and the point where they exit from the apparatus. Ensure that the power cord     receptacle is accessible such that power can be easily disconnected if required.11. Only use the attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold     with the apparatus. When a cart is used, use caution when moving the cart/ apparatus     combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has      been damaged in anyway, such as power supply cord or plug is damaged, liquid has been      spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or      moisture, does not operate normally, or has been dropped. The shock Hazard Marking and       Associated Graphical Symbol is provided on the back panel of unit. Apparatus shall not be      exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be       placed on the apparatus.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Increase the separation between the equipment and receiver. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu