KE2 Connect 21633 KE2 Wireless Sensor w/External Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3790967
Application ID	d+DQdpEhc0bQn6YlIoFqag==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.5kB (493717 bits)
Date Submitted	2018-03-22 00:00:00
Date Available	2018-03-22 00:00:00
Creation Date	2018-01-25 14:03:08
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2018-03-15 10:28:47
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

Trusted
C-DTM-KE2WS - 01
January 2018
KE2 Wireless Sensor
for Temperature & Humidity
KE2 Wireless Sensor
for Temperature & Humidity
Introduction:
More than waterproof and portable, the KE2 Wireless Sensor
is a high-precision digital temperature and humidity indicator
(thermo-hygrometer). The wireless signal and light-weight design
mean installation takes just seconds. And, the sensor’s 3-year battery life ensures low maintenance and extended performance.
The Trusted DTM Edge Manager automatically finds and dashboards up to (35) KE2 Wireless Sensors and KE2 Therm controllers. So, local monitoring is almost instantaneous, and IT
support is generally not necessary. Remote monitoring is easily
achieved by using KE2 Therm's KE2 SmartAccess and/or the KE2
Connect's Trusted DTM Portal.
After powering the unit on, the KE2 Connect EDGE Manager will
automatically locate the KE2 Wireless Sensor and provide temperature and humidity data.
The KE2 Wireless Sensor uses a high-quality, integrated digital
temperature and humidity sensor module, ensuring the transmitter’s superior long-term stability, low latency and resistance to
chemical contamination, thus providing an excellent platform to
deliver temperature and humidity data.
Features & Benefits:
High-accuracy digital temperature and humidity
sensor inside
Temperature monitoring - tenths of a degree
Humidity monitoring - relative humidity +/- .25%
Configurable location name
Wireless signal - using BLE 4.1 (Bluetooth Low
Energy device)
E-mail/Text alerts (see list below)
IP66 waterproof level
300ft./100m broadcasting range
3- year battery life (AAA)
Low battery indicator
12-month free Trusted DTM portal access
Ultra-low power consumption chipset nRF52832
Very fast start-up and measurement time
Real-time data converting, storing, & uploading
Application:
The KE2 Wireless Sensor can be used to measure environmental
temperature and humidity in industrial, commercial, and residential environments. Common applications are: laboratory, agricultural, communications, storage facilities, warehouses, refrigerated
spaces, medical and hospitality.
Excellent security mechanism
Alarms:
High/low temp alarm with adjustable time delay
Disconnect alarm - Edge Manager loses contact
with sensor
Device loss alarm - KE2 Wireless Sensor loses
contact for an extended period (user defined)
Portal Disconnect Alarm (optional)
12 Chamber Drive . Washington, Missouri . 63090
ke2connect.io
636.266.0140
© 2018 KE2 Connect, Washington MO 63090
Trusted
C-DTM-KE2WS - 01 January 2018
Page 2
KE2 Wireless Sensor
for Temperature & Humidity
Physical Properties:
(21632) - KE2 Wireless Sensor for Temperature and Humidity
(21633) - KE2 Wireless Sensor for Temperature and Humidity with External Sensor 36” sensor wire
Waterproof Level
IP66
Case Material
ABS
Case Color
White
Product Dimensions
70.6 x 38 x 17.8mm
Unit Weight
1.52 oz. / 43g
Battery Type
(2) AAA - FR03 Li-Fe batteries
Voltage
3V
Data Access
Edge Manager Product Line or KE2 Connect
Mobile Client
Average Power Consumption
35uA
Transmission Range
Max. 300ft/100m in open space
Assemble
3M adhesive
Technical Specifications:
Item
Value
Error Range
-40°F to 158°F
-40°C to 70°C
Depends on battery
working environment
50°F to 122°F
10°C to 50°C
0.9F°
0.5C°
≤50°F or ≥122°F
≤10°C or ≥50°C
±3.6F°
±2.0C°
Range
0%RH to 100%RH
––––
Measure
Accuracy
0%RH to 90%RH
±2.5% RH
≥90%RH
±3.5% RH
0.05%RH
––––
Once per second
––––
Range
Temperature
Humidity
Measure
Accuracy
Resolution
Sampling Period
––––
12 Chamber Drive . Washington, Missouri . 63090
ke2connect.io
636.266.0140
© 2018 KE2 Connect, Washington MO 63090
Trusted
C-DTM-KE2WS - 01 January 2018
Page 3
KE2 Wireless Sensor
for Temperature & Humidity
Electrical Specifications:
Static Current
<3uA (power consumption under power-off status)
Peak Current
<8mA
Average Current
<35uA
(not including power consumption on data transmission)
Battery Type
FR03
Battery Capacity
1250mAH
Lifetime
Over 3 years
Environmental Properties:
Working
Temperature
-40°F to 158°F
-40°C to 70°C
Long-term Storage
Temperature
50°F to 77°F, ≤ 65%RH
10°C to 25°C, ≤ 65%RH
12 Chamber Drive . Washington, Missouri . 63090
ke2connect.io
636.266.0140
© 2018 KE2 Connect, Washington MO 63090
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
IC Caution:
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux apparei ls radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Create Date                     : 2018:01:25 14:03:08-06:00
Metadata Date                   : 2018:03:15 10:28:47+08:00
Modify Date                     : 2018:03:15 10:28:47+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:9405cf91-238b-4b4f-b91c-7a275da6b760
Original Document ID            : xmp.did:FA7F117407206811822AE3EABFCABBCA
Document ID                     : xmp.id:0A8011740720681180839B4C377099D6
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2018:01:25 14:03:08-06:00
Derived From Instance ID        : xmp.iid:098011740720681180839B4C377099D6
Derived From Document ID        : xmp.did:FA7F117407206811822AE3EABFCABBCA
Derived From Original Document ID: xmp.did:FA7F117407206811822AE3EABFCABBCA
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 5
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools